Cannot find the Express Assistant DAQ on LabVIEW vi

Similar Questions

• Call Assistant DAQ of Labview code

  Hello

  How can I call the DAQ Assistant dialog box

  

  from Labview code, as well as a program compiled with Labview runtime?

  Now, I can set the Express Assistant DAQ vi in the block diagram, but cannot be changed during execution.

  But the configuration of data acquisition is not static. The end user must change.

  A similar dialogue is used inside the Measurement & Automation Explorer with a task global DAQmx.

  Can I call this dialog of Labview?

  Peter

  There is a way to call the DAQ Assistant of MAX of Labview code to create or modify a task DAQmx: Screw Wizard DAQmx LabVIEW

• drivers LabVIEW for agilent e4432b, cannot find the way to control multitone?

  drivers LabVIEW for agilent e4432b, cannot find the way to control multitone? How to deal

  Hello Brownheart,

  Drivers for the instruments aren't supposed to cover all applications use of instruments, only for the most common uses. No matter if multitone is a common use for this instrument, a brief review of the functions available in the driver does not have this feature.

  What you have to do is to create your own config VI using the information of the use of the programming unit. Is not ideal, but at least the driver NOR provided gives you a starting point for adding this feature.

• All of a sudden Outlook Express cannot find the files created by the method of attachment.

  Outlook Express cannot find the newly created files to attach. The files are there in My Documents and Outlook Express can still see all the old files, but each new file for the last month is not seen and cannot be attached. I even typed in the name of the file and it says can not find the file of the same name. I send you the files now through 'Send it' a service online, but complicated to use another program. I checked the 'views' and they seem ok. Help, please!

  It is a long shot, but try it in a new identity.

  File | Identity | Add the new identity. Create a new one and try it. If all goes well, you can import your messages and address book from the old identity and delete it.

  Note: Do not use the main word in the name of the new identity.

  How to create and use identities in Outlook Express
  http://support.Microsoft.com/?kbid=209169

  Bruce Hagen ~ MS - MVP [Mail]

• Cannot use windows backup error: 0 x 80070002 the system cannot find the file specified

  Original title: Backup failed, error code but no NVIDIA chipset

  Whenever I try to use the Windows backup utility, I get a failure with the error code 0 x 80070002 and "the system cannot find the specified files" - I found KB976972, which refers to these two messages, and I have all the conditions specified here EXCEPT that I don't have an NVIDIA USB Enhanced Host controller Interface (EHCI) chipset.   I advanced and tried the hotfix download referred to in article, but he wouldn't because he did not to my system.   I don't seem to find any other KB articles that are relevant.   I have a lot of space on the external hard drive that I am backup.    Would appreciate any help.

  Win7 Backup - error. (0 x 80070002) - cannot find the file specified.
  http://social.technet.Microsoft.com/forums/en-us/w7itprogeneral/thread/bff71aac-c78e-42bd-A959-116019c93478

  ====================================================================

  Norton Ghost version 15 - has a 30 day trial available
  http://www.Symantec.com/Norton/Ghost
  Media: CDR/RW, DVD + R/RW, Blu - Ray, USB and FireWire® devices (IEEE 1394), Iomega Zip® and Jaz® drives
  (Note: trial does not create a Bootable restore CD you will need to restore the image)
  http://www.Symantec.com/Norton/downloads/trialsoftware/register.jsp?PVID=ghost15
  User Guide: ftp://ftp.symantec.com/public/english_us_canada/products/ghost/15/manuals/ngh_15_user_guide.pdf

  Acronis True Image 2012 - has a fully functional trial version of 30 days available.
  (Note: install Acronis and then create a bootable media restoration/rescue CD before you start creating your first image backup)
  http://www.Acronis.com/homecomputing/products/
  30-day trial: http://www.acronis.com/homecomputing/products/#tryorbuy
  True Image User Guides and documentation:
  http://www.Acronis.com/support/documentation/index.html

  Ghost 15 product review
  http://www.PCWorld.com/reviews/product/384118/review/Norton_Ghost_15.html
  Ghost 15 screenshots:
  http://www.Softpedia.com/get/system/back-up-and-recovery/Symantec-Norton-Ghost.shtml

  Acronis True Image Home 2012 product review:
  http://www.whatsabyte.com/P1/ATI_2012_Review.html
  http://www.allacronis.com/Acronis-True-Image-home-review.php

  Acronis True Image Seagate Edition (drive Assistant)
  http://www.Seagate.com/www/en-us/support/downloads/DiscWizard

  Acronis True Image edition of Western Digital (WD)
  http://support.wdc.com/product/downloaddetail.asp?Swid=119&wdc_lang=en

  Also copy disc to disc with Norton Ghost
  http://Service1.Symantec.com/support/PowerQuest.nsf/docid/2004111701520562?OpenDocument&src=hot&prod=Norton+Ghost&ver=10.0&CSM=no&SEG=HHO

  Free alternatives:
  EASEUS Todo Backup Home V3
  (Note: Todo Install, then create a diskette "emergency" before you start creating your first image backup)
  http://www.TODO-backup.com/products/home/free-backup-software.htm

  Untested alternatives
  Reflect disk imaging:
  http://www.Macrium.com/reflectfree.asp

  Paragon Backup & Recovery Free Edition:
  http://www.Paragon-Software.com/home/DB-Express/download.htm

  J W Stuart: http://www.pagestart.com

• Build error cannot find the distribution under construction

  I had a similar problem like this thread.

  http://forums.NI.com/T5/LabVIEW/build-error-can-t-find-distribution-being-built/TD-p/1462842/page/2

  My old guard Installer and ask for copy of the installation is finish. Quite annoying because it takes so long to get there. Any advice would be appreciated. I've attached a screenshot of my error message.

  You created this problem by running a build already install on your development computer. If you are distributing drivers with your installer you should NEVER run the installation program on the machine on which you build.

  Here's what happens:

  All software shops NOR where it was installed since in the Windows registry. When you initially installed it note where you install (DVD, network drive, etc.).

  When you build an installer in TestStand will prompt for this location if it cannot find the original installation files (that is, if you take the DVD from the drive disconnected from the PC from the network, etc.)

  What happened on this PC is you have to build a Setup program, and then you run this installer on the PC, and because the pilots were already present it replaced the path stored in the registry with the path where your Installer (e.g.) was C:\Temp\long path)

  I'm guessing that you have now deleted this former Installer. That means that you have to re - run installers for ALL the software to, OR that you have installed on this machine so the registry is updated to point to the path of DVD or the network path.

• Cannot find the function in the dll library

  I'm trying to use the function I build in a C++ of Labview "Call library function" dll, but it cannot find the name of the function "Add" or "divide". Attached my .dll, file .cpp and screws, could you help me to find out where is the problem?

  The only function exported in your original of the CPP file is the

  add_num()
  

  function. Declare the object as static methods does not export them. It just creates methods of objects that do not have an implicit object as the first parameter pointer and so these functions cannot reference the data object members (but your class has none yet).

  Essentially if you intend to do all your static class methods, using a class is actually pretty meaningless. You would be better with simple standard C functions as your add_num() function is.

• Cannot install on XP Pro SP3: "Service Pack 3 Setup error - the system cannot find the file specified."

  I am trying to install SP3 on my XP Pro.  I get a notice on my screen, stating: "Service Pack 3 Setup error - the system cannot find the file specified."  Don't know what I'd do.  Thank you.  Peter glass

  That's good news. I think you also need to analyze of rootkits being on the right side. So, now:

  Search for rootkits with a program SPECIALLY designed to detect and remove the (aswMBR):

  http://public.avast.com/~Gmerek/aswMBR.htm

  Download this file to your desktop. Double-click the icon to run the program. When the opportunity to download and install the latest Avast definitions do.

  Run a scan. Results in red indicate that this was not a false positive! Do you need to remove the rootkit (including "FixMBR" if necessary).

  And finally, leave your PC on overnight and search for viruses, using this site:
  http://www.eset.com/us/online-scanner/
  Once we are convinced that your PC is clean, here are my instructions (just in case where you still cannot run batch of Geek-Tech file, etc.):

  1. download the installation of SP3 and IE8 (beforehand) files. I prefer to keep these (and other useful files) on a USB key, but this is optional. Here are the links for the installation files:

  http://www.Microsoft.com/download/en/details.aspx?ID=24 (for SP3)

  (You can TOTALLY ignore the message "intended for it professionals"!)

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=43 (for IE8)

  (You need to install IE8 AFTER SP3! Trust in me.)

  IMPORTANT NOTE!

  It is VERY important to ensure that Internet Explorer is at the level IE6 before installing SP3. In case you have IE7 or IE8, you must uninstall it / them, using the Control Panel Add / Remove programs. Let us know if you need assistance with this.

  Once again:

  Make sure that IE is IE6 level before installing SP3. You can go directly from IE6 to IE8 after SP3 has been installed.

  2. disconnect Internet. Also unplug all unnecessary devices.

  3. temporarily disable the automatic updates. To do this:

  Start | Control Panel (switch to Classic view if not already selected). Automatic updates

  4 set up a clean boot. The last thing you need is for a program that runs in the background to interfere with these updates! (It happens!) For more information:

  http://support.Microsoft.com/kb/310353

  (Note that this is the same as setting up a "Diagnostic boot.")

  Reset.

  5 install the SP3. Restart TWICE.

  6 switch to IE8. Restart TWICE.

  (What happens very often is that someone has their software antivirus running as they try to install SP3, which often translates into chaos! "This is why it must be done after installing SP3 and IE).

  7 unscrew the clean boot. (That is, return to the Normal startup).

  8 make sure that firewall Windows is activated (it should already be):

  Start | Control Panel | Security Center

  9 visit Windows Update to download and install only the critical security updates. Restart each time you are prompted.

  10 re - enable automatic updates.

• Windows 7 Task Scheduler error: the system cannot find the specified file.

  Here is information when you try to change the properties of a task in the Task Scheduler:

  FX: {c7b8fb06-bfe1-4c2e-9217-7a69a95bbac4}

  The system cannot find the specified file. (Exception from HRESULT: 0 x 80070002)

  Type of exception: System.IO.FileNotFoundException

  at Microsoft.Windows.ManagementUI.CombinedControls.INetwork.GetName)

  to Microsoft.Windows.ManagementUI.CombinedControls.UINetwork.GetUINetwork (network INetwork)

  at Microsoft.Windows.ManagementUI.CombinedControls.NetworkListManager.GetNetworkList)

  at Microsoft.Windows.ManagementUI.CombinedControls.ControlTaskConditions.PopulateNetworkComboBox)

  at Microsoft.Windows.ManagementUI.CombinedControls.ControlTaskConditions.InitializeConditions)

  at Microsoft.Windows.ManagementUI.CombinedControls.EditTaskDialog.InitializeView)

  at Microsoft.Windows.ManagementUI.CombinedControls.EditTaskDialog.Initialize (file UITaskFolder, String taskName, String title, UserChoice userAction, BaseResultsControl inOwnerView, String inXmlText)

  at Microsoft.Windows.ManagementUI.CombinedControls.BaseResultsControl.EditTask (UITaskFolder file, String TaskName)

  to System.Windows.Forms.MenuItem.OnClick (ByVal e As EventArgs)

  at System.Windows.Forms.Command.Invoke)

  at System.Windows.Forms.Control.WmCommand (Message & m)

  at System.Windows.Forms.Control.WndProc (Message & m)

  at System.Windows.Forms.ListView.WndProc (Message & m)

  at System.Windows.Forms.Control.ControlNativeWindow.WndProc (Message & m)

  at System.Windows.Forms.NativeWindow.Callback (IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)

  Please provide a copy of your system information file. Type the system information in the search box above the Start button and press the ENTER key (alternative is select Start, all programs, accessories, System Tools, system information). Select file, Export and give the file a name noting where it is located. Not to place the cursor in the body of the report before exporting the file. The system creates a new information file system each time system information is available. You must allow a minute or two before the file is completely filled before exporting a copy. Please download the file to your OneDrive, to share with everyone and post a link here. Normal mode preferred report. Please say if the report was obtained in safe mode.

  Please download and share with everybody fresh copies of your System log and journal of the Application (two files) of your event viewer on your disc one and post a link here. You can delete any previous copies of your OneDrive records.

  To access the system, log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window, expand Windows logs and select System. Place the cursor on the system, select the Action in the Menu and record all events like (the evtx default file type) and give a name to the file. Do the same for the application log. Do not offer not filtered files. Do not place the cursor in the list of reports before selecting the Action from the menu. Do not clear the logs so that you have a persistent problem.

  For assistance OneDrive see paragraph 9.3:
  http://www.gerryscomputertips.co.UK/MicrosoftCommunity1.htm

  General remarks on event viewer
  http://www.gerryscomputertips.co.UK/syserrors5.htm

• Windows wil lnot open pictures says windows cannot find the file (photos were recorded he said before that)

  Windows will not open photos says windows cannot find the file (photos have been saved he previously said)

  Thank you

  Hello

  I imagine the inconvenience that you are experiencing and will certainly help you in the right direction to solve the problem. However, I would be grateful if you could answer a few questions to refine the question in order to provide you with better assistance.

  1. Form when you try to open pictures? Is it in Photo Viewer?
  2. What type of files you are trying to open?
  3. You are able to open the photos in the Photos App?
  4. What is the brand and model of the computer?
  5. You did changes to the computer before this problem?

  I suggest you to try the steps below and see if it helps you to solve the problem.

  Method 1: Run the utility to search and index and check.

  a. press the Windows key + X and click on Control Panel.

  b. click on Troubleshooting.

  c. Select display all on the upper left corner.

  d. perform research and solving problems of indexing.

  Method 2: Restart the Windows Search service and check.

  (a) press Windows + R key and type "services.msc" and press ENTER.

  (b) locate the Windows Search service and right-click on it.

  (c) click Properties and check that the start option has been activated.

  Method 3: If the problem persists, I suggest you to run a full scan using the Microsoft Safety Scanner (MSS) to ensure that the computer is virus-free.

  The Microsoft Safety Scanner free is a downloadable security tool that allows analysis at the application and helps remove viruses, spyware and other malicious software. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

   

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

   

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Additional reference:

  Photos app using Windows

  http://Windows.Microsoft.com/en-us/Windows-8/photos-app-FAQ

  Get back to us all the necessary information and the result of the proposed suggestion, we will be happy to help you again.

  Kind regards

• I tried all these steps and still no progress, cannot update or restore my phone. When you try to restore an error appears saying 'cannot find the phone (9).

  I tried all these steps and still no progress, cannot update or restore my phone. When you try to restore an error appears saying 'cannot find the phone (9).

  We do not know what are the following steps, because you have not provided their. Support this article has suggestions for your specific error code.

  If you see errors 9, 4005, 4013, 4014, when you restore your device iOS - Apple Support or

• Cannot find the seetings camera

  Cannot find the camera settings in firefox os smartphone

  Hi sanatankumarsahu,

  What settings to configure for your Firefox OS device camera?

  There is no specific menu of camera settings, but depending on your device and the version, you can choose another camera, turn flash power or reset the focus.

  Please reply to this message with your Firefox OS as well the version and the Build ID device model so that we can give you a definitive answer.

  Thank you

  -Ralph

• Cannot find the function edit that was on my old computer and firefox. When you click the Firefox icon, you can collect the text that has been deleted.

  Cannot find the function edit that was on my old computer and firefox. When you click the Firefox icon you can extract the text that was deleted by accident.

  Hello, you can press the alt key to display the menu bar with the Edit menu temporarily. or you can press ctrl + z which is the shortcut for "undo"...

• Message "Safari cannot find the server.

  In all these days, I get a message 'Safari cannot find the server' on a regular basis despite the fact that I'm connected to the internet and the server is a real server, such as Google or other sites that I use all the time.

  Is there something funky past with Safari that it would suddenly start happening?

  1 disable Proxies if selected.

  System Preferences > network > advanced > proxies tab

  Unlock the lock if you have to.

  Under 'Select the Protocol', uncheck if checked.

  Click 'OK' and then 'apply '.

  2. If this does not help, run EtreCheck and post the report here.

  http://etresoft.com/etrecheck

  Download, open the download folder, click on it to open it and select "Open" in the dialog box to execute.

  Click on the button "Report share" in the toolbar, select "Copy to Clipboard" and then paste it when replying.

• "Safari cannot find the server.

  I have not had this happens in another version of Safari, but since the update more recent (9.1.1 on May 17, 2016), I get the following message several times a day: "Safari cannot find the server. Refreshing the page does not help. After I visit some other sites, I am able to connect to those that I had a problem with. Most of the information I could find going back five or more and seems not applicable. It is not necessarily the same sites that don't load. It is random and occurs throughout the day. It's annoying and sometimes embarrassing, but I'm dealing with it (I didn't wish)!

  Does anyone else have this problem? Is this a bug in the latest version of Safari and there at - it an easy fix? Any advice will be greatly appreciated.

  Thank you.

  Hello

  Could be a cookie problem...

  In your Safari menu bar, click Safari > Preferences then select the Privacy tab, then click: delete all data Web site

  Quit and then restart Safari to test.