Cannot find the files in the Project Muse

When following the project and said to go to file - Photoshop button opens a window with no file. What's wrong?

Hello

When you use file > Place Photoshop button, you can add Photoshop files.

Files Photoshop has the .psd extension. Although you can create a jpeg, png etc. extension of Photoshop but need to Muse .psd file Original give declares to the button.

Please refer to the screenshot below.

Similar Questions

Cannot find the project PTUPGIBDELETE
Hello

Can someone help me out here... Cannot find this PTUPGIBDELETE project while doing the upgrade of the tools.

Thank you.

Texas!
Your first post of this thread, I shouldn't have to know your module and version, and your Peopletools does either, I?
And what you say, that's exactly what I told you in your other thread:
Re: PTUPGIBCLONE does not exist during the upgrade

Your current question dealt with the project, I tried to give the answer above.

And my blog, you can also read:
+ 16. In the application, as a user of PS Designer, open the PTUPGIBCLONE project and copying a file.

+(Addendum: if the application You are installing has been built on PeopleTools 8.48 or later Go directly to Step 20) +.
That means, bypass the stuff on these projects you are looking for.

Nicolas.

Cannot find the project in the form of project serch
Hi all

In the search screen, I can't find any project that created after h24:mi:ss. dd/mm/yyyy (see message below).

Message:
=====================================================================
To benefit from the research above, the project must have been created or updated before: 08/01/2011 13:28:55
=====================================================================

How can I update the current data for the research?

Thank you.
Run the simultaneous program (ADM: rebuild indexes of project search Intermedia), and then try again.

In 11.5.10 you must run the program above to search for projects through the PJT search screen.

Thank you
Govind

RTE de LV cannot open the project files that include references .lvlib in dependencies

I am writing a DLL LabVIEW to inspect the LabVIEW project files, and I noticed that if a project has a .lvlib reference in its dependencies, then the Run-Time Engine is contradictory on whether or not he can find the project file:
- Project.Open returns error 7 (file not found)
- Project.GetFileLVVersion is a success
Here are some excerpts from my code of G and C engaged in this behavior:
```
   int openStatus = StatusSuccess;

   char * projectVersion = createStringWithLength (VersionStringLength);
printf ("Analysis %s\n", pathchaine);

   OpenProject (pathchaine & openStatus, projectVersion, VersionStringLength);

   printf ("  project written in LabVIEW %s\n", projectVersion);
If (openStatus is StatusSuccess)

   {

      printf ("  Open the project file.") \n") ;

   }

   on the other

   {

      printf("Error: could not find Project file, or file was not a Project file (Error code %i).\n», openStatus);")

   }
```
However, when running in the development environment, the two methods are successful.

Is this a bug, and if so, is it fixed in 2014 of LabVIEW?

Here's how you can reproduce:

Prerequisites:
reference .lvlib to break dependencies Project.Open in LV RTE
```
$ make

patch the file "builds/platdefines.h.

GCC - std = c99 g OpenProject.c o OpenProject.exe - lOpenProject - Lbuilds
```
6. type "c:\xtra\temp\OpenProject.lvproj" OpenProject
```
OpenProject $ 'c:\xtra\temp\OpenProject.lvproj '.

Analysis c:\xtra\temp\OpenProject.lvproj

  Project written in LabVIEW 13.0

  Open the project file.
```
7. the opinion that both call nodes execute correctly.

8. type "c:\xtra\temp\OpenProjectWithLvlibDep.lvproj" OpenProject
```
OpenProject $ 'c:\xtra\temp\OpenProjectWithLvlibDep.lvproj '.

Analysis c:\xtra\temp\OpenProjectWithLvlibDep.lvproj

  Project written in LabVIEW 13.0

Error: Could not find the project file or file was not a project file (error code 7).
```
9. notice that the node version managed while the open failure.

10 type diff OpenProject.lvproj OpenProjectWithLvlibDep.lvproj
```
$ diff-u OpenProject.lvproj OpenProjectWithLvlibDep.lvproj

-OpenProject.lvproj  kills Nov  4 11:28:28 2014

+++ OpenProjectWithLvlibDep.lvproj      kills Nov  4 11:32:37 2014

@@-13,7 + 13.11 @.

       true

       fake

       

-      

+      

+          

+              

+          

+      

       

          

             true
```
Here's another way to trigger this behavior, which shows that LabVIEW occasionally Range the element dependencies:
Add to the project a new VI and place the constant path of file "Application Directory" his block diagram.

Select ""leader "Save All (this project)" and use the default name for the new VI.

Type 'c:\xtra\temp\OpenProject.lvproj' OpenProject

Notice that there is a mistake once again, as is expected.

Remove the "Application Directory" path of file constant

Select ""leader "Save All (this project)"

Type 'c:\xtra\temp\OpenProject.lvproj' OpenProject

Note that the problem has disappeared, as is expected.

Add the "Application Directory" path of file constant in the block diagram.

Select ""leader "Save All (this project)"

Type 'c:\xtra\temp\OpenProject.lvproj' OpenProject

Notice there is no problem, which is surprising, because that there should be a mistake because the dependencies item was not tidy.

Close the new VI and pull out of the project.

Select ""leader "Save All (this project)"

Open "OpenProject.lvproj" in a text editor.

Note that the dependencies item was put away.

Add VI back to the project.

Select ""leader "Save All (this project)"

Type 'c:\xtra\temp\OpenProject.lvproj' OpenProject

Notice that there is a mistake once again, as is expected.

NInjaneer_wow wrote:

The same behavior occurs in LabVIEW RTE: a new project with a constant of the Application in an empty vi directory will return an error 7 - file not found, but still return the correct version of LabVIEW in which the project was created.

I did experiment with workarounds for this problem, and I found a.

When I used to get the path of LabVIEW libdir in the ini of the executable file, execution is able to load and inspect the project file.

LIBDIR = 'C:\Program NIUninstaller Instruments\LabVIEW 2013'

While it is expected that a stand-alone executable can be placed on a system that does not have the LabVIEW IDE, it is still surprising to me that the execution engine cannot find standard library of LabVIEW without some explicit guidance. What other factors contribute to this behavior?

References:

Configuration of LabVIEW files and paths- http://labviewwiki.org/LabVIEW_configuration_file/Paths

Generation of PhoneGap Blackberry error. The system cannot find the specified file

I am new to using PhoneGap and I try to configure the sample application, I use PhoneGap version 2.9.0 and apache-ant - 1.9.1.

I have configured apache ant, installed the SDK WebWorks and have configured the project.properties file.

The error seems to be that it can't find the 'CordovaExample' file in the temporary folder, I checked the file and it contains the following files in it: "CordovaExample.jdp", "CordovaExample.jdw" and "CordovaExample.rapc" (among others). Am I missing some configuration so that it can look for one of these 3 files, instead of just "CordovaExample"?

The error is given below, using the command "ant build blackberry":

jamest@JT1 /c/Development/FirstApp
$ ant blackberry build
Buildfile: c:\Development\FirstApp\build.xml

blackberry:

build:

generate-cod-name:
     [echo] Generated name: CordovaExample.cod

clean:
   [delete] Deleting directory c:\Development\FirstApp\build

package-app:
    [mkdir] Created dir: c:\Development\FirstApp\build\widget
     [copy] Copying 22 files to c:\Development\FirstApp\build\widget
      [zip] Building zip: c:\Development\FirstApp\build\CordovaExample.zip

build:
     [exec] [INFO]                      Parsing command line options
     [exec] [INFO]                      Parsing bbwp.properties
     [exec] [INFO]                      Validating application archive
     [exec] [INFO]                      Parsing config.xml
     [exec] [INFO]                      Populating application source
     [exec] [INFO]                      Compiling BlackBerry WebWorks application
     [exec] I/O Error: C:\Users\jamest\AppData\Local\Temp\widgetGen.584154969137
3014448670.tmp\CordovaExample (The system cannot find the file specified)
     [exec] [ERROR]                     RAPC exception occurred

BUILD SUCCESSFUL
Total time: 8 seconds

This has now been resolved - the problem was that I used JDK 1.7, this problem was solved by switching to JDK 1.6.

Cannot open the project file with write access.

I saw that this problem has been reported before, but have yet to find a solution.
I have my project file in an external hard drive. When I plug the hard drive to another computer and want to save it, I get this message:
"Cannot open the project file with write access. The file may be locked, or you don't have permission to write to this location. Select Save as... »
I don't want to register as because other projects refer to this file and also my file is still going to be ruined.
FYI two computers use Windows 7.
All solutions?

Right-click on the folder in Question and select Properties. Select tab security make sure you that you then add everyone to the list of users. Do you this by selecting edit and then add. Type in all members of the section of the object, and click ok. Then select all the user and check full control. Press Apply and we'll adjust the permissions for the folder and subfolders and files.

Eric

ADK

Cannot find the configuration file in the classpath
Cannot find the configuration file /oracle/apps/prc/po/...applicationModule/common/bc4j.xcfg in the classpath.

Hello!

I try to run the following code:
String appModule = "oracle.apps.prc.po.manageDocument.uiModel.viewDocument.applicationModule.ViewPurchasingDocumentApplicationModule";
String cfg = "ViewPurchasingDocumentApplicationModuleLocal";
ApplicationModule applicationModule = (ApplicationModule) Configuration.createRootApplicationModule (appModule, cfg);

I get this error message:
Exception in thread "main" oracle.jbo.ConfigException: Houston-33001: could not find the configuration file /oracle/apps/prc/po/manageDocument/uiModel/viewDocument/applicationModule/common/bc4j.xcfg in the classpath
at oracle.jbo.client.Configuration.loadFromClassPath(Configuration.java:430)
at oracle.jbo.common.ampool.PoolMgr.createPool(PoolMgr.java:293)
at oracle.jbo.common.ampool.PoolMgr.findPool(PoolMgr.java:557)
at oracle.jbo.client.Configuration.createRootApplicationModule(Configuration.java:1334)
at oracle.jbo.client.Configuration.createRootApplicationModule(Configuration.java:1312)
at oracle.apps.prc.po.manageDocument.model.viewPdf.generateXml.getXMLData(generateXml.java:26)
at oracle.apps.prc.po.manageDocument.model.viewPdf.generateXml.main(generateXml.java:39)

I checked and the configuration file is in the correct directory, and I can see it in my Application Module - Configurations. No idea why this is happening? I need to configure something specially for it, or add it in my classpath? If so, how am I supposed to do?

Thank you

Mansi

Published by: Mansi G on October 6, 2008 11:56
Where is the code you posted? Running in a separate project, I guess? This project has a dependency on the project that contains the specified app package?

And just to check (although by default, JDev should do it for you) - the project of app module has been compiled since adding the configuration, right? You should check that the config is not only the title of the project/src, but the title of the project/classes.

Published by: Avrom Roy-Faderman on October 6, 2008 14:02

Oh and BTW - I guess it's not an application typical of ADF, right? In a standard application of the ADF, you would very rarely need to instantiate one module application in code like this. You can only let the function of data binding for you. The technique that you use is the most appropriate for purely programmatic cases, no - UI. (for example, once I tried to put in place an SMTP server, supported by the business components. It was a case of ditching databindings and do the kind of thing that you do, because he had no layer view (because there is no user interface for rendering).

Setup error "the system cannot find the specified file" (hpzprl40.exe)

Trying to install HP Photosmart c5180 all-in-one using the latest version of the software download at HP and have Windows 7 Asus desktop computer. Receive error install "the system cannot find the specified file" (hpzprl40.exe), and the wizard stops. Help, please.

Hi loveisus,

Try using the brush included in the CD or download. Let me know what you find?

Of the Original installation CD:

1. Insert the CD in the drive and then cancel Setup

2. open my computer and click right then on the CD from the drive and select open

3 open the Util folder

4 open the CCC folder

5. run the uninstall_L4 (exe or Bat)

6. once the uninstall is complete, restart the computer

7 run the Accessories\ System Tools Disk Cleanup

8. download and install the latest version of Adobe flash player

http://www.Adobe.com/support/flashplayer/downloads.html

9 download drivers and full software features

http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-76232-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 1153481 & sw_lang=.

10. run the download to reinstall the printer

If the software has been downloaded and extracted to your system:

1. type % temp % in the field of race

2. Locate and open the folder starting with 7z (example: 7zS2356)

3 open the Util folder

4 open the CCC folder

5. run the uninstall_L4 (exe or Bat)

6. once the uninstall is complete, restart the computer

7 run the Accessories\ System Tools Disk Cleanup

8. download and install the latest version of Adobe flash player

http://www.Adobe.com/support/flashplayer/downloads.html

9 download drivers and full software features

http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-76232-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 1153481 & sw_lang=.

10. run the download to reinstall the printer

Mini 101NR - restore to fail, error message "cannot find the file.

While restoring my Mini 1010NR with 8 GB SSD from the disk of XP SP3 operating system, everything fine until partially through the recovery an error message saying that it cannot find the i386\ASMS file.

I tried the options "install fresh copy" and "repair" and get this same error message in both directions.

I formatted the SDS with both regular and quick NTFS file system. My OSD software gives me the possibility of formatting of the SDS with fat? I have not tried. That I should?

I looked at the CD, and in the i386 subdirectory, I see a subdirectory called ASMS. I see several subdirectories in this directory.

I am booting from an external CD/DVD drive. This seems correct, as the installed much restoration program file until stopping in the message saying that it couldn't find the file ASMS.

This OSD provided with the computer when I bought it new at HP.

Thank you

Peter

The cd is corrupted or damaged or installation loses communication with the CD-ROM drive. If you can, try another cdrom drive.

http://support.Microsoft.com/kb/q311755/

Cannot find the operating system files

Cannot find the operating system files after system, Windows 7 error Ox490 HP Pavilion e9150t recovery

Thank you very much I'll check on that. Ended up doing a restore of the original. Painful but successful.

Photosmart C4780 installation fails at the "system cannot find the file specified."

My problem began simply with your printer, a HP Photosmart C4780, who has always had a wireless connection and would not print. Initially, the checked network connection fine control panel of the printer. I ran a Microsoft printer troubleshooting, which found a block in line print and authorized. The first test page print, but did print the "internal test page. I did not understand what it meant, so I looked for help on the HP site.

I ran the HP print and Scan Doctorand he suggested I have reinstall the driver. I have downloaded and saved the current HP (PS_AIO_06_C4700_USW_Full_Win_enu_140_175.exe) and then uninstalled the existing driver. When I tried to install a new, a window pops up saying "the system cannot find the file specified," with only a single box for click that simply says "OK". The installation went through 'examining installation options', after entering "check updates, download updates, install updates" and then it was all in "audit system", who jumped out of the window "file not found" upwards, and when I clicked 'OK', the installation window as well as the error message box simply disappeared. Which I suppose is the path to the file is under the window, but it didn't fit so he showed not the end. What I read was "C:\Users\... \Local\Temp\7zS588E\Setup\.\Setup\hpzpnp40...»

I found a topic on the same printer model for the same problem in the forum, which offered this hotfix:

You must first complete a level 3 of the software uninstallation. I've included the steps below to do this.

1. press the Windows key and the letter R
2. type %temp%, and then click OK
3. open the 7z folder (a more recent if there are multiples)
4 open the util folder
5 open the folder of the ccc
6. double-click on the Uninstall_L3

Once you have completed the Uninstall_L3, delete all of the items listed in the temp folder. Note, you will not be able to remove all the elements, please ignore those that do not. Then please empty the trash and perform a clean boot. I've included the document «How to perform a boot in Windows» If your computer does not request it, restart your computer.

Once your computer is back, you must reinstall the printer software. You can do this either by using the Setup CD, or by downloading the software.

I did what was suggested, until he got to the point where it says it was the case recommend not removing any more items if I had intended on using the HP Officejet printer (Yes, I have a second HP printer connected to the network) anytime in the future. Not really understand how it all works, I decided to stop what I was doing, so unfortunately it has not solved my problem.

Do I need to uninstall both printers HP before I can reinstall a? And if I do that, is there a reason that I wouldn't be able to reinstall the two printers? Looks like I'm asking trouble. Bottom line... I can not install the driver.

I tried to install the full versions and the driver base and still get the same result.

I have a HP Pavilion dv6 - 3100t for computer laptop, running Windows 7 Edition Premium, version 6.1.7601 family service pack 1 64-bit. I have not installed new hardware or software. This printer has always had a wireless connection. The router I'm using is a Netgear 54Mbps WGR614 v6 (provided by my cable company) and the network includes not only my laptop and the Photosmart printer, but also desktop ASUS, HP printer, an Officejet 6300 series (used only for printing graphics and photos via a wired to the router) and a chip on Vizio TV. I use Norton 360 first Edition and disabled the antivirus auto-protect when I downloaded and tried to install the driver.

Help, please! And thanks in advance for your time and your attention.

Oh, Jamieson, it worked! I can print again! A massive amount of thanks and congratulations to you.

I couldn't believe it when he actually passed the point where it normally would stop the installation, but then almost at the end, upward jumped «Fatal error during installation» My excitement sank into a depression. He said while the installation was not successful and he needed to collect information in order to diagnose the fault. I looked at what has been collected, and it was more or less gobblety-* beep * for me. There was a code of 19714722 error condition, if that means anything.

Then he placed on my desk, the "Error of Installation HP - Windows 7.hta" file and instructed me to do away with the current window, restart, and then open the file and move forward with these guidelines. I did and he basically had me to restart the computer once again, and then turn the printer off, unplug the printer, then unplug the router, wait 30 seconds and then plug the TAA - DAA and back in, I'm back in the business of printing.

Thank you very much for your time and patience.

All the best to you and yours!

LaserJet MFP M125nw Pro: #2 cannot install LaserJet MFP M125nw Pro because of the error "the system cannot find the file specified."

Hello

I struggled in the last 2 days to install my new all in one Pro LaserJet MFP M125nw. I tried almost all the stuff Google and this community offered under the heading "the system cannot find specified file", without success. My frustration is huge because I'm not really a novice when it comes to solve similar problems.

Here is what I do and what is happening:

I downloaded the latest version of the complete software for XP HP offers through their Web site. I tried to install the drivers through the install wizzard, then manually (used for the files in the folder 7ZXXX in the directrory temp) but no matter what I do, I get the same error again and again. In fact XP recognizes the printer and the scanner, it installs even drivers for the scanner and it works but after maybe 50 attempts in different ways, XP couldn't install the printer driver.

Here are a few screenshots:

http://i.imgur.com/GuGmTP2.jpg

http://i.imgur.com/OZyFuz0.jpg

http://i.imgur.com/2O0J3aE.jpg

http://i.imgur.com/exAy5RG.jpg

It's the event viewer:

Event type: error
Event source: MsiInstaller
Event category: no
Event ID: 11721
Date: 26.6.2015 г.
Time: 18:47:40
User: HPREDDY-79F942C14\Yasko
Computer: YASKO-79F942C14
Description:
The description for the event (11721) in Source (MsiInstaller) ID is not found. The local computer may not have the information necessary registry or message DLL files to display messages from a remote computer. You may be able to use the option/auxsource = flag to retrieve this description; For more information, see Help and Support. The following information is part of the event: product: HP Support Solutions Framework - error 1721. There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your provider to support personal or package. Action: UnregisterAclmControl, location: C:\Program Files\Hp\Common\AclmControl.exe, command: /unreg; (NULL); (NULL); (NULL); (NULL);.
Data :
0000: 7 b 46 43 33 43 32 42 37 {FC3C2B7
0008: 37 36 38 30 30 34 7-6800-4 2d 2d
0010: 38 43 36 41 31 35 44 8 C 6-A15D 2D
0018: 2D 39 44 31 30 33 31 31 - 9 D 10311
{0020: 33 30 43 31 36 7 Dec 30 16}

=====================================================================================

Event type: error
Event source: app error
Event category: no
Event ID: 1000
Date: 26.6.2015 г.
Time: 18:56:14
User: n/a
Computer: YASKO-79F942C14
Description:
Failing application plugin - container.exe, version 38.0.5.5623, failed module mozalloc.dll, version 38.0.5.5623, address 0x00001aa1 failure.

For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data :
0000: 41 70 70 6 c 69 63 61 74 Applicat
0008: 69 6th 6f 20 46 61 69 6 c ion Fail
0010: 75 72 65 20 20 70 6 c 75 plu ure
0018: 67 69 6th 2d 63 6f 6 74 gin-cont
0020: 61 69 6 65 2nd 72 65 78 ainer.ex
0028: 65 20 33 38 2e 30 2e 35 e 38.0.5
0030: 2nd 35 36 32 33 20 69 6th en.5623
0038: 20 6 d 6f 7 a 61 6 c 6 c 6f mozallo
0040: 63 2e 64 6 c 6 c 20 33 38 38 c.dll
0048: 30 2nd 2nd 2nd 35 35 36 32.0.5.562
0050: 33 20 61 74 6f 20 66 66 3-off
0058: 73 65 74 20 30 30 30 30 put 0000
0060: 31 61 61 31 0a 1aa1 0D...

Found the solution. The problem was that I had Microsoft .net Framework 4. After that I went back to 3.5, the driver through the installation went perfectly. Thank you guys for the effort.

HP photosmart c4580 program cannot find the installation 7zs7e9a file

HP photosmart c4580 after installation at the start of problem cannot find the 7zs7e9a Setup file.

cancellation of the attempt to install the software will run without problem.

tried to extract files without 7zs7e9a file in the temp directory

all solutions?

I solved this problem. It was the error of Microsoft Installer program tried to run the corrupted original due to an MSI installation. the quickest way to fix the problem was to uninstall and reinstall the hp software.

PS

OS vista Home premium 64-bit

Thank you for your quick response

concerning

clhxo

Can't backup windows because Backup has encountered a problem during backup of the C:\Users\marcel\Documents\Youcam file. Error: (the system cannot find the specified file. (0 x 80070002))

can not backup windows because: Backup has encountered a problem during backup of the C:\Users\marcel\Documents\Youcam file. Error: (the system cannot find the specified file. (0 x 80070002))
Backup has encountered a problem during backup of the C:\Users\marcel\Documents\Youcam file. Error: (the system cannot find the specified file. (0 x 80070002)).

Maybe it's because I disabled the camera to prevent other people using the computer?

[Moved from comments]

Hi Marrcel,

Thank you for keeping us posted.

The issue can be due to turning the camera off. I suggest you to activate the camera and try.

Please come back for any clarification on this or any issue of Windows. We will be happy to help you.

Recently I have not been able to burn a CD with Windows Media Player: I get an error message: "Windows Media Player cannot find the file."

Hello

I recently haven't been able to burn a CD with Windows Media Player (he worked last week, but not now). I get an error message "Windows Media Player cannot find the file. The link between the library item and its digital media file associated with may be broken. "Try to fix the link or delete the item. There is a web help option which says that to fix a link, you click on the blue icon next to the item, then click "Browse this article. But the only icon I see is a little blue triangle next to individual songs in the library pane or list, there is no icon next to the name of the playlist. Although the click with the right button on the blue triangle gives me a few options, "Browse this point" is not one of them. Does anyone have any ideas what is wrong and how can I sort it please!

Rick

original title: burning a CD problems

Hello

(1) what version of Windows Media Player do you use?
(2) what is the model of your CD burner?
(3) you have the latest drivers for the CD burner?
(4) what type of file you are trying to burn?

(5) you receive error codes?

(6) what version of the operating system is installed on the computer?

(7) we get to a particular file?

Method 1: You can try to update the drivers of your CD burner visit the manufactures Web site.

Method 2: You can try to remove the CD, and then insert another CD and try to burn another file and check if the problem persists.

Method 3: You can also check out the link below:

Windows Help and procedures: burn a CD or DVD in Windows Media Player: frequently asked questions

I hope this information helps!

XP - error: the system cannot find the specified file.

I was installing Windows XP Service Pack 3 today and it worked very well until he came to update registry after the installation process, after what is happening the installation closes and then displays an error "the system cannot find the file specified." I tried to close all programs, and then restart and shut down everything that runs when the computer starts and which also failed.

Hello

1. have you downloaded the stand-alone package for the service Pack 3 or are you using Windows update?

2. are you able to boot to the desktop now?

Method 1.
Run Disk Cleanup and disable the security software and t hen try the same installation and check.
Want to t he article below for disk cleanup:
http://support.Microsoft.com/kb/310312

Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

Method 2.
If the problem still exists together own starting the computer and attempt to install the service pack.
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353
Note: After that troubleshooting is complete, configure the computer to a normal startup. See the "steps to configure Windows to use a Normal startup state" section in the article above.

I hope this helps.

Thank you, and in what concerns:
Shekhar S - Microsoft technical support.

Visit our Microsoft answers feedback Forum and let us know what you think.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

Cannot find the files in the Project Muse

Similar Questions

Maybe you are looking for