Cannot find the user accounts at startup in vista

Similar Questions

• Cannot find the user profile

  After turning on my computer, I try to connect with our user account. an icon appears and says that the user profile is damaged and there could be a security issue.  the following icon says that it cannot find the profile of the user and that a temporary profile has been put up.  I'm trying to get back access to the user profile because he has sensitive information at the time that must be consulted, photos of family and passwords important programs.  I need to know that if there is a way to restore the user profile and retrieve information, the user profile of temporay gives access to certain programs and software, but not the critics.

  The following procedure, you should get pretty quickly:

  "How to recover damaged Windows XP user profile"
    <>http://support.Microsoft.com/kb/555473 >

  Damaged profiles are almost always accompanied with alteration of the disc.  In addition to the above (or sometimes instead of him), a check disk with the /f or/r option is highly recommended.  Note that on a large drive or a drive with a lot of problems this audit can take hours and you cannot use your machine while it is in progress.  In addition, there is a small chance that it may be worse, so now is a great time to update your backups.

  "How to perform disk error in Windows XP check"
    <>http://support.Microsoft.com/kb/315265 >

  HTH,
  JW

• MOM. Implementation - the system cannot find the file specified at startup

  original title: when that I start the computer, this message - MOM. Implementation, Version = 2.0.3463.30896, culture = neutral, PublicKeyToken = 90ba9c70f846762e, or one of its dependencies. The system cannot find the specified file. __

  So my video capabilities do not work well and the system is slower loading pages of web sites.

  Help, please

  Try a system restore to a Date before the problem began:

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Then:

  This error seems to indicate a driver problem ATI Catalyst

  Go to the Web site of the manufacturer of your laptop computer-graphics/computer card > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  See you soon.

  Mick Murphy - Microsoft partner

• Cannot find the operating system at startup

  Using my Vista PC, I installed XP-Pro(32bit) disk a HARD tour, (which HARD drive has been correctly removed from the target computer), but now my Vista PC can not find any OS.

  (I HOPE a different permutation - thanks.)

  If you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Mail application cannot find the user/Library/Mail folder

  Hello

  Recently my laptop crashed and I had to reinstall first OSX 10.5.8, so I've updated to 10.6.8 and now I have the latest version of El Capitan.

  In the first two versions relocated I could normally restart Mail with my backup files restored (had to reinstall all the good e-mail accounts), but now I want to open the mail application in El Capitan and it won't open, saying that it does not find a user/Library/Mail folder. But it IS a Mail folder and there all the restored items and folders inside.

  I also find the file com.apple.mail.plist in my preferences, I thought that maybe that was the problem, but it seems that it is not.

  Can anyone help please?

  If the folder you want is "user/Library/Mail" then the folder in fact does not exist.  Try instead "~/Library/Mail.

• Cannot create the user account.

  I activated the account "guest" and even tried to create a new. Both times, it says "preparing your desktop" the first time I connect, then an error message appears on the way in which it cannot load Windows Mail, and then I get a blue screen - like wallpaper is there, but there is no office. Bar none start, no icons, just a cursor that I can move, but I can't click anything. I have to ctrl + alt + delete and log out. I need to create another account, or at the very least, enable the guest account. Help, please.

  http://www.Vistax64.com/tutorials/93009-user-account-create.html

  Read/view the tutorial above.

  See you soon.

  Mick Murphy - Microsoft partner

• Virtual Center Version 2.5.0 Build 119598 - add user / Select user GUI - not finding the users accounts and groups in Microsoft AD

  All,

  Has anyone seen the following symptoms?

  (1) when a user or group account does not appear in the 'users and groups' dialogue box 'Select users' research will result in a "select users or groups" pop indicating "no user or group not found as the search result. Before beginning your search, in the dialog box "Select users", the correct domain name appeared in the "domain:" drop-down list.

  (2) not possible to account or group of usernames containing spaces. She will accept the format of the name of groups 'Pre-windows 2000' of objects. The account names and groups ' select users ' GUI will be find the account or group when you enter the explicit & lt; domain name & gt; ------& lt; Account name & gt; in the text box 'Users' or & lt; domain name & gt; ------& lt; Group name & gt;.

  Is there a known issue with user accounts or to find when they do not appear in the "users and groups" in the dialog box "select users".

  Kind regards

  Steve

  Sorry, wrong forum, this is Server 2.0.

  ---

  If you have found this device or any other answer useful please consider the use of buttons useful or Correct to award points.

• Cannot find the user name and password

  I tried to download firefox, but when I open the page he asks me a username and password. I tried everything, but insofar as cannot access the internet.

  ID it by default user name and password, or am, I sent one, if this is not how to solve this problem?

  Download Firefox from this page:

  • Firefox 8.0.x: http://www.mozilla.com/en-US/firefox/all.html

• Cannot access the user account

  I recently sent my computer in my college of departmental it to update some software. They could not access my account due to a password. They bi - passed this by making two accounts 'Test' and 'comments'. If I'm going to one of these accounts I can go to c:\Users[user-name]\Music\iTunes\iTunes and I can see my old account named "owner". However when I connect 'owner' is not an option for a click for a login account. All my old files are always under the account of 'owner '. How can I get back "owner" as I use an account to which?

  Read this and see if it helps:

  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  Difficulty of a corrupted user profile

  After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  See you soon.

  Mick Murphy - Microsoft partner

• Cisco SRP527w cannot find the user management tab

  Hello

  Can someone help me? I just bought a new Cisco SRP527w and I'm all new to this type of material. I can't find the tab for user management that I'm changing the default password.

  Also, I can't access the internet. My rj45 of the ADSL modem is connected to the WAN/LAN port with parameters IP static. What missed here? your help is very appreciated.

  Hi Ronald, if you are clicking on all other tabs and it still seems only the setup of the wizard, you must change your internet browser. Try Firefox or IE. This should solve that.

  -Tom
  Please evaluate the useful messages

• Help! Cannot access the user account control settings!

  I have disabled UAC today because I wanted to delete some files. However, it did not work so I went back and tried to click on UAC to allow him once again, but I can't. The UAC window is not pop up. Help please!

  I also created a new account but I couldn't access the UAC on this account either. I restarted my computer 2 times already. What should I do?

  Here you go:

  1. keep tapping F8 during the first phase of startup.

  2. select Repair from the menu.

  3. Select an administrator account, and then enter its password.

  4. When you are prompted, select System Restore.

  5. set Windows to a point before this problem occurred.

• Somehow, I blocked my user account (login) and I tried to help but can't find any info. How to UNLOCK the user account. Than k you

  The user has clicked on Vista, the little lock at the bottom of the START window.

  Somehow, I blocked my user account (login) and I tried to help but can't find any info. How to UNLOCK the user account. Thank you

  Hello

  Click the account icon that was locked and enter the password IF you know and otherwise:

  Try Safe Mode - several times, press F8 that you start. The Admin account there is no default password
  so unless someone has changed, you should have access there. Then Control Panel - accounts - users
  Manage another account - use this down your user account (to the lowest level) APPLY/OK
  then go back and reset it to the Admin APPLY/OK - this clearly allows corruption. Do this several times.
  Then fix the password in your usual account. Do not forget to leave your account administrator if you
  wish.

  If no joy Mode without failure:

  Try this - use the hidden administrator account to lower your user account (to the lowest level) APPLY/OK
  then go back and reset it to the Admin APPLY/OK - this clearly allows corruption. Do this several times.
  Then fix the password in your usual account. Do not forget to leave your account administrator if you
  wish.

  Make another Admin account with your password and use it to fix the others if necessary. (just for
  repair, don't use regular account, not a safety valve) always keep a spare ADMIN account.

  DO NOT LEAVE THE ENABLED LSA OR USE DAILY. If it corrupts you are toast!

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  You can run the Admin account hidden from the prompt by if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  If you cannot access your old account, you can still use an Admin to migrate to another (do not forget to always
  not that an Admin account that is not used except for testing and difficulty).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  ---------------------------------------------------------

  If necessary:

  Ophcrack is a free Windows password cracker based on rainbow tables.
  http://Ophcrack.sourceforge.NET/

  How to reset a Windows Vista - Trinity Rescue Kit method - password password reset disc - burn the ISO
  http://www.WikiHow.com/reset-a-Windows-Vista-password
  YouTube video on the use of the Trinity rescue Kit
  http://www.YouTube.com/results?search_query=Trinity+rescue+Kit&search_type=&AQ=f

  Reset your forgotten password the easy way using the Ultimate Boot CD for Windows
  http://www.howtogeek.com/HOWTO/Windows-Vista/reset-your-forgotten-password-the-easy-way-using-the-ultimate-boot-CD-for-Windows/

  Offline NT Password & Reset Editor
  http://home.eunet.no/~pnordahl/ntpasswd/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Passing through the system properties in the user accounts, I have a user called "Account unknown" is not appear in manage my accounts, how to find it and access?

  I was looking through system properties... went into the settings in advance to user profiles...     I have a user called "Account unknown" this account is not displayed in manage my account, how can I do to find out what I can access it or delete it if I need to...

  Check out these links:

  Impossible to remove an unknown account, get the error 'cannot delete the unknown account because this object inherits permissions from its parent.
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/unable-to-remove-account-unknown-getting-error-you/8d01c84d-4bda-4A42-9425-53818eb1af21?page=1

  the former admin account controlling many files how to remove this unknown account I have only one account and can not delete or move files.
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/the-old-Admin-account-controlling-many-folders-how/3160990a-e723-45dc-84E8-3e493ef57c89?page=2

  Vista - unknown account
  http://www.Vistax64.com/Vista-account-administration/69763-unknown-account.html

• When you try to upload a document in Word from the Internet Windows error: "Windows cannot find"C:\Users\jma1... ". »

  Whenever I try to upload a document in word from the internet, I get a msg of error "Windows cannot find"C:\Users\jma1\AppData\Local\Temp\Low... ". "It will not download every word on the internet documents. How can I fix? Please give me instructions step by step. Thank you!

  Need help

  Hello

  1. doesn't this problem occurs only with download of word or other files?

  2. what version of internet explore do you use?

  I suggest that you try to upload to another location and check.

  Method 01:

  I suggest also allows you to check in SafeMode with network.

  Advanced, including safe mode startup options

  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  I suggest you to follow the methods and check.

  Method 02:

  How to remove the contents of the temporary Internet files folder

  http://support.Microsoft.com/kb/260897

  Method 03:

  I suggest you to follow the steps and check.

  Run the command to reset the low integrity level on the low folder

  (a) click the start Pearl, click on "All programs" and click on "Accessories".

  (b) right-click "Command Prompt" and click "Run as Administrator".

  (c) in the window "Administrator: command prompt", copy and paste (without the quotes)

  (d) "ICACLS"% userprofile%\AppData\Local\Temp\Low"/setintegritylevel (OI) (CI) low.

  (e) press ENTER.

  (f) restart the computer and test the issue.

• Is impossible to turn on the guest account. Cannot create new user account. "The service user profile Service has no logon. User profile cannot be loaded. »

  Is impossible to turn on the guest account.  Cannot create new user account.  After to try one of those and reboot, the icons of account appear, but when you try to use, the following instructions of error present when you try to log in with the new account or comments: "the user profile Service service has no logon.  User profile cannot be loaded. "I looked at the answers to all the previous ones (including the KB947215) and no not to address specifically.  For the most part, they seem to assume that there is a guest or a new profile in the first place...

  The system is Win 7 Pro 64-bit with all available updates.  I can't say when the last time that the guest account has worked (rarely used) and just found out I can't do new additional user, accounts trying to solve the problem of account of comments... so I have not tried to enter Safe Mode and do a system restore , because I can't yet identify a useful restore point...

  There are no entries in the registry for a guest or a new standard user account.  The registry entries for the three accounts normal-quickly (2 x admin, 1 x level) seem to be appropriate.  Watch register computer/HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList

  S-1-5-18 = system profile

  19 = local service,

  20 = network service,

  21 long numbers + 1004 plus User1 (admin),

  22 long + 1005 plus 2 user (admin),

  23 plus long + 1006 is user3 (standard,

  and no comments or additional profiles appear.

  C:\Users includes

  All users,

  User1,

  User3,

  By default,.

  Default user (which is inaccessible for me, even as an administrator),

  Public,

  User2,

  No guest or additional profile appear.

  All except the default user (I can't open) seem to have the appropriate, NTUser.DAT files although I don't know how to check for corruption.  Having both a default value

  and a default user folder seems hokey.

  I think I understand instructions how to fix or remove a corrupted profile, but that does not apply to the guest account or profiles that do not exist.

  Help?  Ideas?

  This message contains the strange solution.

  [Plan B - I found one thread where one user said that the same symptoms of the problem that you experience this problem solved]

  - - - - - - - - - - -

  Plan h - while another user said that it was caused by a file Windows Live problem

  This is the thread I can not create a new user account (Windows 7): the user profile service service doesn't have the logon

  You find it difficult to follow the thread as it's long and reported problem by different people to confuse it and there is also a bit of bickering [long filaments often end up being quite incomprehensible].

  ..., See references to the event viewer in the middle of page 4 and Windows Live we [at the bottom of page 2 more on page 3].

  I see not the logic of the any of those things, but if one of them do things long enough that you are trying to create new accounts that works, you will know how in the future until a proper solution is found.

  This is the useful part where this user has tested the solutions proposed in this thread linked above: -.

  This has proved to contain leads to a difficulty.  Have to admit, when I read everything the first time, several days, I did indeed find it confusing and even the parts that I "heard" (sorta) does not appear to be related to my symptoms.

  It turns out that the answer of JDMICHAL May 17, 2011 contained this:

  (1) C:\Users\Default\AppData\Local\Microsoft\Windows open live
  (2) this directory has two subdirectories with a single file of each. Go into each directory and apply the following:
  (a) make a right click on the file, open the properties.
  (b) click the Security tab.
  (c) it will issue a message: "to continue, you must be an administrative user with permission to view this object's security properties. Would continue you? ». Click on the button continue.
  (d) click on the Add button...
  (e) ' everyone' type in the box at the bottom of the dialog box. Click on "check names"; It should be emphasized the "everyone". Click OK.
  (f) ensure that the new "Everyone" entry "read" and "read & run" check under the column "allow".

  After doing this for two files, attempt to connect to the account. He must undergo.

  The procedure (bascially) worked... Although the different answers on my system differed slightly along the way (perhaps due to the slightly different versions of Win 7?, because I was already logged in as an administrator?).

  In any case, "Everyone" with the read and read/execute permissions adding to these two files seems to have done the trick:

  C:\Users\Default\AppData\Local\Microsoft\Windows Live\Bici\Bici1_00.sqm

  and

  C:\Users\Default\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm

  Thank you for leading me to this!