Cannot format second HARD on a Satellite P200-13 s PSPBGE drive

Similar Questions

• The recovery disk reformatted TWO hard disks on Satellite P200?

  Hello

  My Satellite P200 has two hard drives.
  When I use the recovery disc, it reformatted both drives or only one where Vista will be? I chose the first option, by the way.
  Thank you, in advance, for your help.

  If you choose the first option in recovery then it reformatted only the first HARD drive and it will consider the other HDD as additional storage space, as if it were a memory stick. When you get to the point of recover where you choose the operating system to install, it takes an option for settings or Expert mode. In one of them, I think that you can configure recovery and set up partitions.

  If you want the operating system must be installed on both drives HARD, which is a bit useless, you have to remove one then do the reocvery on the other and then replace the retrieved by another and then to perform the recovery on that one. The only thing that I think this will mess up to comes from the computer won't know what MBR (Master Boot Record) to load, but if this isn't a problem then you can do what I just mentioned.

  I hope this helps.

• Can I use a second disk on my Satellite P200?

  Hi all

  I want to thank my 1E9 P200 with the second hard disk. But I could not found some connectors in the expansion slot. Thanks for the reply :-)

  Helmut

  PS: The great machine ;-)

  Hello

  I know it sounds strange, but the P200 series was delivered with a second internal HARD drive Bay.
  But not every P200 was equipped with the second HARD disk controller.
  If you can't put the P200 with the second HARD disk if the HARD drive interface is missing.

  Sorry, nothing to see :(

• Windows xp Setup cannot format the hard drive

  Original title: windows xp installation

  I had to change hard drives, I went to load my copy of microsoft windows xp and it tells me it cannot format the HDD how many times can we use the xp disc? Or whats wrong?

  Hi Joshua6495,

  What is the full error message that you receive?

  See the article below, which deals with a similar question

  During installation, you are unable to format a Partition with a file Allocation Table Format

  http://support.Microsoft.com/kb/301340/

  You can use the Windows XP installation disc as many times as you want on the same computer

  Note: All programs on the computer and the data will be lost if you format the hard drive. It is recommended to make a backup of your data before performing any Installation of Windows.

  Thanks and greetings

  Ajay K

  Microsoft Answers Support Engineer

  ---------------------------------------------------------------------------------------------------------
  Visit our Microsoft answers feedback Forum and let us know what you think.

• cannot access second hard drive with Vista

  I just installed a second hard drive in my laptop. The Bios recognizes and it appears on the desktop, but when I try to access the drive to format it, it says that I don't have sufficient rights to perform this operation. I am logged on as administrator

  I can't format a partition to NTFS my laptop, I can't access same dirve. Received a message that you do not have sufficient rights to perform this operation while I try to format the disk have any solution... ?
  http://wiki.answers.com/Q/I_cant_format_my_laptop's_one_NTFS_partition_I_cant_access_same_dirve. Got_a_message_you_do_not_have_sufficient_rights_to_perform_this_operation_while_i_try_to_format_the_drive_Have_any_solution...

  Access denied when accessing USB drives in Windows Vista
  http://blarts.WordPress.com/2007/12/08/access-denied-when-accessing-USB-drives-in-Windows-Vista/

• Satellite P200-140-CD/DVD drive does not read the CD

  Hi all

  I have a Satellite P200-140. The DVD/CD Player plays all DVDs without problem. However, it does not read CD. A message 'no disc' appears.
  I've updated the drivers, cleaned the lens, completed all the normal tasks.

  Any advise / solutions out there?

  Hello

  Maybe you should try to remove the capital letters and lowerfilters in the registry, because you can often read here in the forum:

  (1) run regedit (Start-Run-Regedit online online)
  2) navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class {4D36E965-E325-11CE-BFC1-08002BE10318}
  (3) in the right pane, delete the "UpperFilters" key and delete the key "LowerFilters".
  (4) restart.

  I hope this works for you too! :)

  Good bye

• Satellite L305D S5895: Win 7 cannot find the HARD drive or cannot format the HARD drive on a clean install

  I have laptop Satellite L305D S5895 of the customer. It was delivered to me by the customer who tried to install Windows XP Pro, Vista and none would install.
  He said he tried all the CD that he had finally dropped on it and delivered it to me installation.

  When I got the score have been removed, so I tried to install Win 7 and when I do a custom install, I get an error indicating that the hard drive can not be formatted on disk 0 or it will give an error that no hard drives have been found.

  I have reset the bios default and no matter what I do, it won't format or find the hard drive. I was going to upgrade the bios, but the only way I found to upgrade the bios is once windows is installed.

  Everyone has ideas about this laptop so I can get a system installed. I checked the bios and there is no parameters for a sata, raid or IDE disk drive, so it seems that this version cannot be changed.

  Thanks for anyone who can help you.

  Rick

  Hello

  First of all it is an American notebook series.
  [Satellite L305D-S5895 | http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/modelContent.jsp?ct=DL&os=&category=&moid=2144776& rpn = PSLC0U & modelFilter = L305D-S5895 & SelCategorie = 3 & selFamily = 1073768663]

  The laptop supports a processor AMD and ATI chipset.
  This means that the drivers SATA is part of the ATI graphics card driver.

  You must include the first SATA driver in order to install the Windows operating system.
  You could add the SATA driver for the Windows disk using software like nLite / vLite

  Welcome them

• Cannot format external hard drive

  Formatting an external hard drive
  I can't get my external hard drive to format, the window says it is not formatted, so can someone please help me get this format?

  It is a 20 GB 2.5samsung, or is this even compatible with a Telechareger?

  Hello

  1. What is the brand and model of your external hard drive?
  2. you have any data on the disk?

  Try to format the drive on another computer and check if it helps.

  In addition, run the command chkdsk (check disk) on the disk.

  Follow these steps:
  1. click on start and then right click on computer.
  2. click on properties.
  3. now click on theTools menu, and then click check now.
  4. Select the external hard drive.
  5. check the "automatically fix file system errors" and "scan for and attempt recovery of bad sectors".
  6. click on check now.

  Kind regards
  Afzal Taher-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Bad SD card format has been reported on Satellite P200 - Vista 32 bit

  The player card on my laptop seems to have stopped working. I checked the Device Manager and there is no warning in there. I reinstalled the Flashmedia driver just to be sure and rebooted but still no joy.

  The map seems to be recognized to some extent as Windows Explorer shows 'SD Card (f)', but in the management of the computer-> Storage-> disk management F: appears as 23,78 GB of unallocated space... which is rather strange, because it's a 1 GB SD card.

  The only major updates (other than Windows Update), I've done since Christmas (when I finally remember how the map works) was to install the update of the BIOS 2.50 a.,

  Anyone know of any issued with this BIOS version and card readers?

  Sorry buddy but I don t see any SD card problems!
  The SD card has been recognized in windows (My Computer) and seems to work correctly. The size of the SD card seems to be reported wrong
  Is this good?

  I recommend to format the SD card using the Toshiba tool (if pre-installed) and then you can check the size of SD card in the SD card properties.

  Greetings

• Satellite P200/S04 PSPB6A - Infrared Driver for Win 7

  I recently updated my Toshiba P200/S04 (PSPB6A-0CS04M) for Windows 7 32 bit. After upgrading my media Center remote did not work, and I found that it was because Windows didn't detect my infrared device, with nothing else appearing in Device Manager.

  There is no drivers Windows 7 available for the infrared device, so I tried to use the 32-bit driver for Vista, but without success. Does anyone know how or where I can get a driver or device, as it is frustrating not being able to use the remote control with the computer.

  Hello

  AFAIK the irda (infrared driver) Vista is used to transfer files or folders to an infrared device. It s is not necessary for the functionality of remote control!

  The remote control can be used as part of Windows Media Center.
  Therefore, start the WMC in order to test the infrared control.

• Can I use non-Toshiba Satellite P200 - 14H on display driver?

  Can I use display driver other than the driver from Toshiba support page?
  I recently got a massage from microsoft solution centar who recommend me to visit the AMD web site to find the most recent driver.
  So I wonder if I can get my license with ordinary, non-Toshiba driver and that I could possibly get or lose with it?

  Hello

  You can use it but only at your own risk.
  The non-Toshiba graphics card drivers are not tested and don t support protection against overheating which contribute to avoid a damage due to higher temperature GPU.

  The non-Toshiba graphics card driver must be installed in the Device Manager.
  Then, use you an advanced installation procedure and can point to the driver files, stored on the HARD drive.

  Welcome them

• I deleted my graphics on Satellite P200 - 1 g 6 driver

  help, can someone tell me how to get my card back or how do you know, one that I had to re-download the same?
  I think that my husband our, removed when he was trying to look for something.

  Hello

  Installation of the graphics driver is not difficult.
  You must visit the European driver Toshiba page:
  http://EU.computers.Toshiba-Europe.com-> supported Downloads &-> Download drivers

  There you have to choose your model of laptop, and you will get all the drivers!
  Chose the right driver for the right to use Windows, download the package, unzip and run the installation.

  PS: What model of laptop do you have?

• Satellite P200 (PSPB3E) - HDMI audio driver, Windows XP Home edition

  Hello

  I use Windows XP at the moment and I can't seem to find a driver to get the sound on the functioning of the HDMI port.

  I have the latest drivers for the graphics card using mobility modder.

  The sound works without no driver install Linux ubuntu and of course on the vista build that comes pre installed on the laptop.

  Someone help out me here please :)

  Thanks in advance.

  Jon.

  I tested with my A300 preinstalled WXP and I managed to do the work.
  Before you start movie go to sound properties (Control Panel) and located in the device tabs und audio voice by default HDMI device and confirm with OK.

  After do this start the movie and I hope you get sound on TV.

  Please let me know if it works for you.

• Satellite P200 - 1 FT - audio driver for win 7

  Hello!

  First: I know that Toshiba offers only a 'pilot limited' support for Win 7...
  I'm looking for a driver for my sound devices. That's why I need to know what audio chip is installed in the laptop. I know it's a realtek chip, but not which...

  Is this device 5.1 audio - device? There are 2 outputs, then I would be happy if you ;)

  Thanks for your help!

  Hello

  The device supports a Realtek HD audio chip.
  There is only one pilot on the page of the Realtek driver that is compatible with the HD audio chip.

  You can use the Realtek audio driver, which was published for example for other portable devices such as L500 or A300 series
  The audio driver should work as well. !

• Satellite P200-1 - can I use 2nd HARD drive?

  Hello

  I am always working on my Satellite P200-1 and now, my HDD1 is full.

  I see that there is a location for a second HDD. But I can't find the plug!

  Therefore, it is possible to connect a second HDD on my satellite P200-1BY? Because I bought a new HARD drive and I can't plug it, I only have 7 days to return the HARD drive to the store.

  Thanks for your replies!

  Hello

  If the connector to the second HARD drive is not available there is no way to use two internal hard drives.
  This HARD back and buy HDD external, placed in the HARD disk box. This HARD drive you can connect using the USB cable and it is the best solution for you.

  I guess that HARD disk internal, you have lots of data that you don't need every day and you can save it to external HARD drive. So you can do free space on the internal HARD disk.

  I do the same.

  Good bye