Cannot generate interesting traffic
Why doesn't the following config generate no matter what interesting traffic when I ping 192.168.100.161 10.40.10.117?
I have a crypto debugging on and it doesn't seem to be any attempt to bring up the tunnel. I checked that it is hitting the correct access list and it is NATing correctly, but there is no attempt to bring up the tunnel. I would like an overview of this issue.
Thank you.
-pk
(I cut the pieces that I felt were significant to the problem.)
---------------------------------------
name Phil 192.168.100.161
the AddressesAllowed object-group network
Description here are the addresses that are allowed through the Firewall VPN.
network-object 10.40.10.118 255.255.255.255
network-object 10.40.110.71 255.255.255.255
network-object 10.48.10.37 255.255.255.255
network-object 10.48.10.38 255.255.255.255
network-object 192.168.41.31 255.255.255.255
network-object 192.168.41.32 255.255.255.255
network-object 10.46.0.15 255.255.255.255
network-object 10.46.0.19 255.255.255.255
network-object 10.40.10.117 255.255.255.255
network-object 10.46.0.1 255.255.255.255
polnat161 list of allowed access host ip Phil object-group AddressesAllowed
NAT (inside) 0-list of access inside_outbound_nat0_acl
NAT (inside) 1 0.0.0.0 0.0.0.0 0 0
public static 10.44.3.161 (inside, outside) access-list polnat161 0 0
Permitted connection ipsec sysopt
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
outside_map 40 ipsec-isakmp crypto map
card crypto outside_map 40 correspondence address polnat161
peer set card crypto outside_map 40 21.54.52.112
outside_map crypto 40 card value transform-set ESP-3DES-SHA
life safety association set card crypto outside_map 40 seconds 21600 4608000 kilobytes
outside_map interface card crypto outside
ISAKMP allows outside
ISAKMP key * address 21.54.52.112 netmask 255.255.255.255 No.-xauth No. config-mode
ISAKMP identity address
part of pre authentication ISAKMP policy 40
ISAKMP policy 40 3des encryption
ISAKMP policy 40 sha hash
40 2 ISAKMP policy group
ISAKMP living 40 3600 duration strategy
Hi Philippe
Was your previous and current config is OK except one thing. You translate Philip to 10.44.3.161 when the internal IP address tries to reach one of the networks listed in AddressesAllowed it's very good.
But you say your crypto to establish a tunnel when Philip tries to climb AddressesAllowed. But Philip is translated! So it isn't the IP address that comes from traffic. It's 10.44.3.161. If you need to make the following change
int_traffic_40 permit IP host 10.44.3.161 list object-group AddressesAllowed
No crypto outside_map 40 correspondence card for polnat161
card crypto outside_map 40 correspondence address int_traffic_40
Concerning
Tags: Cisco Security
Similar Questions
-
VPN Site to Site ASA (only happens with interesting traffic)
Is anyway to get an ASA to VPN site-to-site ASA addition interesting traffic? I need to keep this tunnel independently of traffic is anyway to do this?
Unfortunately, no such feature has been developed on the SAA. You need to deceive the ASA with a host located in the "interesting" part of the network to constantly generate interesting traffic. Here are a few suggestions:
-Use the IP SLA on a Cisco device
-Perform a host TCP ping
-Setting up a host of the site has press site B as a NTP source ASA
Thank you for evaluating useful messages!
-
Bring up the tunnel vpn crypto without interesting traffic map
Is it possible on ASA to bring up the tunnel vpn site to site static crypto map without generating interesting traffic? I want to reverse route injection generate road dynamic until traffic begins to flow.
Roman,
Unless something chnaged recently RRI inserts routes without present SAs, meaning that they are static (in contrast to current default behavior on IOS 12.4 (9) T-I_think leave).
But to answer the question, in more recent versions, you can bring up the tunnel using packet - trace CLI.
M.
Edit: request for improvement that will present the same features of IPP on ASA as on IOS:
http://Tools.Cisco.com/support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId= CSCsx67450
-
ASA base S2S VPN, Tunnel establishes only when interesting traffic hits to end distance
Dear all,
I need your help to solve the problem mentioned below.
VPN tunnel established between the unit two ASA. A DEVICE and device B
(1) if interesting traffic initiates a LAN device. traffic ACL hits. TUNEL is not coming
(2) if interesting traffic initiates B LAN device. Tunnel will establish all the works of serivces
(3) after the Tunnel device establishmnet B. We forced to tunnel down at both ends. Interesting again traffic initiates device a surpringly tunnel
will go up. After 2 or 3 days (after life expire 86400 seconds) initiated traffic of device A, tunnel will not esatblish.
(it comes to rescue link: interesting won't be there all the time.)
checked all parametrs, everthing seems fine. Here are the logs of attached but not more informative debugging on the balls. Please suggest.
February 2, 2010 13:23:17: % ASA-7-713236: IP = 81.145.x.x, IKE_DECODE new SEND Message (msgid = 0) with payloads: HDR + HER (1), SELLER (13) + (0) NONE total length: 496
February 2, 2010 13:23:18: % ASA-6-713219: IP = 81.x.x.x, KEY-ACQUIRE Queuing messages are treated when SA P1 is finished.
February 2, 2010 13:23:18: % ASA-6-713219: IP = 81.x.x.x, KEY-ACQUIRE Queuing messages are treated when SA P1 is finished.
February 2, 2010 13:23:23: % ASA-6-713219: IP = 81.x.x.x, KEY-ACQUIRE Queuing messages are treated when SA P1 is finished.
February 2, 2010 13:23:25: % ASA-7-715065: IP = 81.x.x.x, history of mistake IKE MM Initiator WSF (struct & 0x1abb1e10)
, : MM_DONE, EV_ERROR--> MM_WAIT_MSG2, EV_RETRY--> MM_WAIT_MSG2, EV_TIMEOUT--> MM_WAIT_MSG2 NullEvent--> MM_SND_MSG1, EV_SND_MSG--> MM_SND_MSG1, EV_START_TMR--> MM_SND_MSG1, EV_RESEND_MSG--> MM_WAIT_MSG2, EV_RETRY February 2, 2010 13:23:25: % ASA-7-713906: IP = 81.x.x.x, IKE SA MM:56f95c85 ending: flags 0 x 01000022, refcnt 0, tuncnt 0
February 2, 2010 13:23:25: % ASA-7-713906: IP = 81.x.x.x, sending clear/delete with the message of reason
February 2, 2010 13:23:25: % ASA-3-713902: IP = 81.x.x.x, counterpart of drop table counterpart, didn't match!
February 2, 2010 13:23:25: % ASA-4-713903: IP = 81.x.x.x, error: cannot delete PeerTblEntry
Hi, I have a similar problem a long time ago. You can choose which set up the tunnel in your crypto card:
card crypto bidirectional IPsec_map 1 set-type of connection
I hope that it might help to solve your problem. Kind regards.
-
How can I correct gateway is accessible, but cannot receive network traffic on internet
I have a Windows 7 laptop. All my drivers are up to date. It happens every 10 to 15 tion. When problem he pulls it only resets my wifi. Then it will happen again. I reset my router already. I pass the channel for my wifi. I have uninstall the anti-virus software. I'm stuck here please help.
How do i fix gateway is accessible but cannot recieve network traffic from internet
Hello
I appreciate the efforts to try to solve the problem. You might face this problem because corrupt or the network driver. You could also face this problem because of the incompatibility between the IP address. Please write us with the following details.
What is the brand and model of your computer?
You did it all changes to networking prior to this problem?
Do you have an error message when you try to access the Internet using a browser?
I suggest you follow the steps below.
Method 1: Run the network troubleshooter utility.
Click on the link below and run the network troubleshooter utility. Automated convenience store is a tool that can find and automatically fix problems with your computer. These utilities are not designed to solve all the problems, but they are useful to try because they can often save you time and effort.
Using the troubleshooter from network in Windows 7
http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7
Check the question and proceed to the following method if you are still having problems.
Method 2: Try resetting the TCP/IP stack.
Click on the link below and follow the steps as for Windows 7 in the section I would like to fix it myself.
How to reset TCP/IP using the NetShell utility.
http://support.Microsoft.com/kb/299357
You can also follow the steps in the tutorial below. It contains the methods of troubleshooting issues related to the network database.
Wireless and wired network problems
Let us know the status of the issue and the details asked. We will help you.
-
Cisco VPN Site to Site - Interesting traffic required to put in place a VPN or not?
A really quick and easy for the guru there VPN...
Essentially, I am setting up a VPN for backup, but there is NO interesting traffic unfortunately and we need VPN upward.
So... is this possible?
Thanks in advance
Arnoult
I would also like to add to David's response. Some persistent according to which firewall and configuration, you use either have phase 1 KeepAlive, or full end-to-end KeepAlive 2 phase.
I do not know the equivalent of Cisco or if they even have one. Example of this with Juniper dead-peer-detection (DPD) sends only persistent IKEv1/2, while the monitoring of VPN sends ICMP echo requests to follow the VPN / or says he's dead.
With DPD, it isn't exactly a traffic interesting survey, it's just the IKE "Hello you're here" messages. After awhile, the vpn can go down due to lack of interesting traffic or having to re - negotiate the phase 2. However, to create interesting traffic, you can assign an sla for icmp ip end-to-end.
You may have noticed in the past that VPN will just down after a while (if you have this configuration)
There are three modes of RE how actually starts in the negotiations on the SAA
One answer: Specifies that this peer does respond to incoming connections from IKE first during the exchange of the original owner to determine the appropriate peer to connect to.
Bidirectional (default): Specifies that this peer can accept and come from the connections based on this crypto map entry. This is the type of default login for Site-to-Site connections. [Only if interesting traffic is put in correspondence]
Originate only: Specifies that this peer is launching the first Exchange of industrial property to determine the appropriate peer to connect to.
For the ASA Experts out there, please correct me if I'm wrong.
Hope this helps
Bilal
-
VPN3005 and GRE as interesting traffic (in tunnel)
Hello
is it possible to qualify the GRE or interesting traffic IPinIP tunnel traffic
(in the Tunnel LAN2LAN) on a VPN3005.
On router or PIX simply define you access-list with gre or IP, how
can you do that on a hub if possible?
Thanks in advance,
Kind regards
Stefan
Hello
Just set the Lists(based on interesting traffic) network and hub crypt GRE traffic as IP or ICMP protocol, so no specific configuration is necessary.
Thank you
AFAQ
-
Specify remote access interesting traffic?
This is probably a stupid question, but I can't make my vpn remote access traffic decryption. I use an ASA5510 and 5.0 cisco vpn client. I have no problem getting the next tunnel. But traffic 'decrypted' zero rest and increments "ecarte traffic" at all times.
Here is the ASA5510 encryption config:
OK, I guess that this site does not allow to paste text so I have attached the config.
I'm pretty sure that I can't pass the traffic because I was not able to understand how to specify interesting traffic for the vpn connection. Can someone please show me the syntax for this? It seems that it must be a sort of tunnel - group commands.
Am I the only one who thinks that the Cisco documentation is worth anything on it? The ASA configuration guide you give all that you need to configure a tunnel, but has absolutely nothing on the config required to actually pass traffic. This helps a lot.
Hello
If you see the traffic is encrypted by the VPN Client but no return traffic may not be a configuration that is not on the ASA host or destination do not have a good road to the VPN Client or something else.
To my knowledge, if you do not specify this tunnel on the VPN Client connection then EVERYTHING is going to be in the client endpoint VPN tunnel.
If you want to specify what to send to the VPN you are using configurations of the 'group policy '.
VPN-GROUP-POLICY group policy interns
attributes of VPN-GROUP-POLICY-group policy
Split-tunnel-policy tunnelall
OR
standard permit access list TUNNEL of SPLIT
VPN-GROUP-POLICY group policy interns
attributes of VPN-GROUP-POLICY-group policy
Split-tunnel-policy tunnelspecified
Split-tunnel-network-list value of SPLIT TUNNEL
- Usually the ACL 'standard' which includes 'permit' statements for all of the network you want to tunnel to the VPN
"Group policy" is then set under configurations "tunnel-group.
It would probably be easier to check when to see the configurations on the ASA. If you are simply testing connectivity ICMP I recommend that you check that you have 'an icmp inspection' configured so that ICMP Echo-reply messages are automatically allowed by the ASA.
-Jouni
-
Widget «cannot generate preview» Google maps
The widget was working this morning but now it says cannot generate Preview in muse and now it is now appear when I saw in the browser. All this experience?
Just try to remove the card, the site of publication again in BC, then add the map and re - publish on BC.
Hope that works!
David
-
Cannot generate any form in oracle r12
Dear gurus,
Suddenly, we cannot generate any 'standard or made-to-measure' form with following error message:
frmcmp_batch Module=$AU_TOP/forms/US/INVGIPDP.fmb Userid = apps/apps compile_all = Yes module_type = batch form only = no output_file=$INV_TOP/12.0.0/forms/US/test.fmx
10.1 forms (form of the compiler) Version 10.1.2.3.0 (Production)
10.1 forms (form compiler): Release-Production
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Oracle Database 11 g Enterprise Edition Release 11.2.0.3.0 - 64 bit Production
With partitioning, OLAP, Data Mining and Real Application Testing options
PL/SQL Version 10.1.0.5.0 (Production)
Oracle V10.1.2.3.0 - Production procedure generator
Oracle 10.1.2.0.0 graphic virtual system Version (Production)
Oracle Multimedia Version 10.1.2.0.2 (Production)
Oracle tools integration Version 10.1.2.0.2 (Production)
Common tools Oracle area Version 10.1.2.0.2
Oracle CORE Production 10.1.0.5.0
Compilation of specifications package APP_CUSTOM...
No compilation errors.Compilation of specifications package IPDP_TREE...
No compilation errors.Compilation of specifications package DATA_SET_CTRL...
No compilation errors.Compilation of RESULTS package specifications...
No compilation errors.Compilation of specifications package APP_CUSTOM...
No compilation errors.Compilation of the package APP_CUSTOM body...
Compile error on the APP_CUSTOM package body:
PL/SQL ERROR 302 to line 24, column 19
component 'Disabled PERSON' must be declared
PL/SQL ERROR on line 24, column 5 0
Declaration ignored
PL/SQL ERROR on line 30, column 5 201
identifier ' APP_WINDOW. CLOSE_FIRST_WINDOW' must be declared
PL/SQL ERROR on line 30, column 5 0
Declaration ignored
PL/SQL ERROR 201 to line 43, column 5
identifier ' APP_WINDOW. SET_WINDOW_POSITION' must be declared
PL/SQL ERROR at line 43, column 5 0
Declaration ignored
PL/SQL ERROR 201 at line 46, column 3
identifier ' APP_WINDOW. SET_TITLE' must be declared
PL/SQL ERROR at line 46, column 3 0
Declaration ignoredCompilation of specifications package IPDP_TREE...
No compilation errors.Compilation of the package IPDP_TREE body...
Compile error on the IPDP_TREE package body:
PL/SQL ERROR at line 43, column 26 201
identifier ' APPTREE. COLLAPSED_NODE' must be declared
PL/SQL ERROR 0 to line 43, column 3
Declaration ignored
PL/SQL ERROR on line 50, column 26 201
identifier ' APPTREE. TREE_NAME' must be declared
PL/SQL ERROR 0 in line 50, column 3
Declaration ignored
PL/SQL ERROR at line 103, column 39 201
identifier ' APPTREE. TRIGGER_NODE_USER_VALUE' must be declared
PL/SQL ERROR at line 96, column 3 0
Ignored SQL statement
PL/SQL ERROR on line 109 column 18 201
identifier ' APPTREE. TRIGGER_NODE_TYPE' must be declared
PL/SQL ERROR on line 109 column 3 0
Declaration ignored
PL/SQL ERROR on line 117, column 13 201
identifier ' APPTREE. TRIGGER_NODE_LOW_VALUE' must be declared
PL/SQL ERROR on line 117, column 5 0
Declaration ignored
PL/SQL ERROR on line 144, column 20 201
identifier ' APPTREE. TRIGGER_NODE_HIGH_VALUE' must be declared
PL/SQL ERROR on line 144, column 5 0
Declaration ignored
PL/SQL ERROR on line 148, column 26 201
identifier ' APPTREE. TREE_NAME' must be declared
PL/SQL ERROR on line 148, column 3 0
Declaration ignored
PL/SQL ERROR 201 to 159, column 6 line
identifier ' APPTREE. TRIGGER_NODE_TYPE' must be declared
PL/SQL ERROR on line 159, column 3 0
Declaration ignored
PL/SQL ERROR 201 at line 184, column 6
identifier ' APPTREE. TRIGGER_NODE_TYPE' must be declared
PL/SQL ERROR at line 184, column 3 0
Declaration ignored
PL/SQL ERROR at line 264, column 15 201
identifier ' APPTREE. FIND_TREE_NODE' must be declared
PL/SQL ERROR on line 264, column 2 0
Declaration ignored
PL/SQL ERROR on line 272, column 28 201
identifier ' APPTREE. TREE_NAME' must be declared
PL/SQL ERROR on line 272, column 5 0
Declaration ignored
PL/SQL ERROR 201 at line 275, column 16
identifier ' APPTREE. FIND_TREE_NODE' must be declared
PL/SQL ERROR at line 275, column 3 0
Declaration ignored
PL/SQL ERROR line 282, column 28 201
identifier ' APPTREE. TREE_NAME' must be declared
PL/SQL ERROR on line 282, column 5 0
Declaration ignored
PL/SQL ERROR 201 at line 290, column 6
identifier ' APPTREE. ACTION "must be declared
PL/SQL ERROR on line 290, column 3 0
Declaration ignoredCompilation of specifications package DATA_SET_CTRL...
No compilation errors.Compilation of the package DATA_SET_CTRL body...
Compile error on the DATA_SET_CTRL package body:
PL/SQL ERROR on line 30, column 7 201
identifier ' APPTREE. NEW_VIEW_BY' must be declared
PL/SQL ERROR on line 30, column 7 0
Declaration ignored
PL/SQL ERROR 201 to line 43, column 7
identifier ' APP_ITEM_PROPERTY. SET_PROPERTY' must be declared
PL/SQL ERROR at line 43, column 7 0
Declaration ignored
PL/SQL ERROR 201 at line 46, column 7
identifier ' APP_ITEM_PROPERTY. SET_PROPERTY' must be declared
PL/SQL ERROR at line 46, column 7 0
Declaration ignored
PL/SQL ERROR on line 97, column 14 201
identifier ' APP_FORM. QUIETCOMMIT' must be declared
PL/SQL ERROR on line 97, column 11 0
Declaration ignoredCompilation of RESULTS package specifications...
No compilation errors.Package body compiling the RESULTS...
No compilation errors.
Compilation errors are produced.
Form not created--------------------------------------------------------------------
DB version: 11.2.0.3
Apps version: 12.1.3
Operating system: hp - ux B.11.31 U ia64
Kindly advice.
Kind regards
Ahmed
Ahmed,
It's something should be set by your development team.
If CUSTOM.pll has been changed, you can simply determine what has changed (unless it is documented), and you will need to contact your developers to see what has changed. If you have any other instance on the same level of Group of patches, then you could replace the CUSTOM.pll file and see if it helps.
Forms must be compiled successfully on the layer node client (using Forms builder) before moving them to the server and compile again.
Thank you
Hussein
-
Cannot generate the thumbnail on all widgets (including integrated)
My installation of Muse (2014.2, OSX Mavericks) gives me a "cannot generate the thumbnail" error one no matter what widget I place (including built-in ones, my own and those that I downloaded from the site of Muse documentation on github).
So far, I have tried many things including restart Muse, reboot the machine, turn off all browsers in the background, but I can not change this behavior.
This problem is specific to the machine, I'm getting because the same site on the exact version on another machine (os x mavericks) does not give me this behavior.
Any help is appreciated.
Thank you
A.Solved. While this problem appeared machine related, it wasn't - it turns out that I had added a js file in my page header that was missing.
So, the moral of this story is that if you do not see the "unable to generate thumbnail error", look at all the custom HTML you added to the site. Errors in the HTML elements may appear in the wrong place.
A.
-
Internal error detected, cannot generate the eBook (11 Robohelp)
Hello
I'm new to Robohelp (I've been a user long term of Framemaker for print publications).
The generation of Ebook of the carrycot single Source Layout has stopped working and I get this message: internal error detected, cannot generate the eBook (11 Robohelp eBook preprocessor 11.0.0.179)
Compilation G:\Development\Course Development\CONE-online\Characteristics-of-light\Robohelp\Characteristics-of-light\Charac light\ Ta! SSL! \eBook\! epub_tmp_folder_0\Characteristics_of_light. EPUB...
Preparation create eBook...
Compensation output folder...
Preparation of files for eBook...
Copying files...
Updating files...
Finish the preparation in 4 seconds
Initializing the compiler...
Generation of output - eBook eBook Manager (11.0.2.240)...
Transforming XHTML topics...
About XHTML preparation "Questions_about_light.xhtml"...
About XHTML preparation "The_Electromagnetic_Spectrum.xhtml"...
Preparation of subject XHTML ' Using_wave_properties/Interferometry.xhtml '...
Preparation of subject XHTML ' Using_wave_properties/Mach - Zehnder_modulators.xhtml '...
Preparation of subject XHTML "Using_wave_properties/The-wave-properties-of - light .xhtml"...
Preparation of subject XHTML ' Wavelengths_and_Frequencies_in_optical_networks/ITU_bands.xhtml '...
Preparation of subject XHTML ' Wavelengths_and_Frequencies_in_optical_networks/Light_sources_and_wavelengths.xhtml '...
Preparation XHTML topic ' Wavelengths_and_Frequencies_in_optical_networks/Wavelengths_and_Frequencies_in_fibre_opt ics.xhtml '...
Preparing to Table of contents...
Output EPUB 3...
EPUB 3 output generation failed.
Internal error occur, could not generate the eBook.
Could someone give me advice on what to do to fix? What have I done? I tried to install Adobe digs Eds 4 and it seems stop working after that, but I tried to uninstall that and it is always the same. I also tried to reinstall TCS5. Reactive out of HTML5 still works ok.
Thanks in advance,
Sarah
It could be a longshot, but try to move the project to a place where the path is shorter. I had a similar problem (I think I got the same error a few months ago, but I can't be 100% certain), where the epub was not able to generate, and I tried to move my project to another location where the path to the files was shorter. This solves the problem for me.
-
Cannot generate valid OCD!
I can't believe CC InDesign for Mac cannot generate ePub TOC! All securities chapter in the table of contents shall be replaced by the title of the book, adding numbers to the end, like "Book Title", "book title-1", "book-2 title", "title of book-3", etc. so I can't submit the result to the iBook store... ' ".
Is there and workaround?
Generate a table of contents really works for me in InDesign CC. As Ellis says, make sure you are creating a Style of table of contents and reference table of contents Style name in the EPUB export dialog box.
Example below:
If this does not work, restore your InDesign preferences.
-
RH6 HTML - cannot generate WebHelp
I use RoboHelp HTML - RH6. I recently cancelled generating WebHelp, after that I started and forgot to move from the skin. Now, when I try to generate WebHelp, the screen seems to hang for a while but never starts generating. I tried to re-opening and closing the project. I was also able to generate FlashHelp after, but still cannot generate WebHelp. Any ideas?
Thanks in advance.
Try to create a new page layout.
See www.grainge.org for creating tips and RoboHelp
-
Cannot generate the Word .doc
100 classic page chm project compiles successfully. You will need to create the document Word for graphic designer do a nice .pdf. Get warnings (style not defined, mapped to normal). Can not find the style not defined in the code, but see some class = msonormal elements. Then, I get error "Word Document became corrupted when you attempt to add a topic malformed". Then, RoboHelp is unable to deal with a subject. Then it has Fatal Error "Word Document got corrupted" and she is abandoned. A little more of these erros and he cannot generate the rest of the Word document.
Cannot search this forum for "malformed", either. Get a "Variable FTVAR_RESULTTYPE is undefined." Message.
Cannot find the whole chain, but the deletion of any reference MSObookmark did the trick, thanks
Maybe you are looking for
-
Hello Hello. I buy a second hand iphone 5s, how to know my iphone screen is original or fake? Please help me Thank you.
-
install cd games I bought onlinewindows32 error
-
Telepresence, only audio calls
When we use our SX and C series for audio calls the cameras come out of standby. Is there a setting to keep cameras in mode sleep for audio only calls?
-
Cannot find images moved by LR CC
LR CC 2015.1.1 Release, iMac, OS X 10.10.4I spend all my images of an old external drive (Seagate) to a new (WD green RAID). The problem is that LR is unable to find the new disk images when pointing in "LR find missing image dialogue." Try again
-
Opening older files in the new version
Hi-I have recently updated from CS3 to creative cloud and now I can't use any of my old files or work of them when I open them. The files are described and grouped. Is there a work around? I hate to have to redo the 10 years of work. I'm self-taught