Cannot generate vmxnet for ClearOS (CentOS based) modules

Similar Questions

• Generate revenue for project with strict limit agreement

  Is it possible to have the billing extension to do the following:
  
  We currently have a problem with the extension of billing that changes the calculation of the revenue on a project of work at the cost of a project of work/cost formula. The way it works now is that
  transactions are always income distributions normally as the working method, then the extension will create the event of revenue to bring ITD recipes to the level that it should be based on the formula of cost.
  However, when income ITD project hits strict limit, transactions cannot earn potential revenue and therefore cannot generate invoice even though there is no limit on billing.
  
  This extension should be fixed to work as follows:
  -Transaction must provision of amount equal to zero and the event of revenue created by the extension should be calculated based on the formula as in the cost method
  -Transactions should always be marked as zero, with amount distributed income even if the income of the ITD has reached the strict limit so that billers can always charge these operations.
  
  My question is: will this option feasible? Is it possible that transactions distributed with 0 amount?
  
  Thank you very much
  -Ed

  Hello

  When you calculate the income by the EVENTS, as in the case of COST, you should ignore the entire amount of the income of the RDL.
  The RDL generated for spending projects will only be used for billing / invoicing.

  Dina

• Update for Windows 7 for x 64-based systems (KB976902) is originally the majority of my X 86 and some current applications for Windows 7 to stop working.

  Original title: Updates

  The last update update for Windows 7 for x 64-based systems (KB976902) is originally the majority of my X 86 and some current applications for Win7 stop working. This includes IE8, MS Office10 and a few others. Whats with THAT! I have updates blocked for now, until the writers get it sorted.

  Hello

  The article mentions that this update cannot be uninstalled. This software update is a prerequisite to install a service pack. In addition, this update improves reliability when you install or remove service packs and updates for Windows Server 2008 R2 and Windows 7.

  http://support.Microsoft.com/kb/976902

  Since you have problems with Internet Explorer 8 and Microsoft Office 2010 after installing the update, I suspect the involvement of a third party software conflict. I would like you to put your machine in aclean boot State in order to eliminate conflicts of third party software.

  Note: Follow step 7 to restart the computer as usual.

  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Provide the Webservice not generating corresponding WSDL URL link based on the service operation.

  Hi all

  The webservice to provide link generates the corresponding WSDL URL based on the Service operation.

  For example, we currently have two service operations namely creating and updating. We use the e-mail of lines. Provide the Webservice correct WSDL URL generated link to the create operation, but it provides the same URL for the update operation as well. kindly share your knowledge if you guys ever faced similar problem.

  Concerning

  Lherault

  Hakan,

  I agree with you that service operations are childs of Services. I am trying to create URLS for the operations of specific service because of the requirement. So if this is the case, then the URL must be different, I think. I tried your logic of selection of all service operations and generate a unique URL for this service. But when I tried to open the URL in Internet explorer all I could find under the label of operation name is a Service operation and not any other selected. I went and checked under the UTILITIES SERVICE--> Service of Directors. Under the WSDL of the Service operation generaed I deleted the existing generated WSDL and then recreated the URL of the web service to provide and the problem is solved. Thanks for your time and effort Hakan... Very much appreciated.

  Concerning

  Lherault

• Cannot generate any form in oracle r12

  Dear gurus,

  Suddenly, we cannot generate any 'standard or made-to-measure' form with following error message:

  frmcmp_batch Module=$AU_TOP/forms/US/INVGIPDP.fmb Userid = apps/apps compile_all = Yes module_type = batch form only = no output_file=$INV_TOP/12.0.0/forms/US/test.fmx

  10.1 forms (form of the compiler) Version 10.1.2.3.0 (Production)

  10.1 forms (form compiler): Release-Production

  Copyright (c) 1982, 2005, Oracle.  All rights reserved.

  Oracle Database 11 g Enterprise Edition Release 11.2.0.3.0 - 64 bit Production
  With partitioning, OLAP, Data Mining and Real Application Testing options
  PL/SQL Version 10.1.0.5.0 (Production)
  Oracle V10.1.2.3.0 - Production procedure generator
  Oracle 10.1.2.0.0 graphic virtual system Version (Production)
  Oracle Multimedia Version 10.1.2.0.2 (Production)
  Oracle tools integration Version 10.1.2.0.2 (Production)
  Common tools Oracle area Version 10.1.2.0.2
  Oracle CORE Production 10.1.0.5.0
  Compilation of specifications package APP_CUSTOM...
  No compilation errors.

  Compilation of specifications package IPDP_TREE...
  No compilation errors.

  Compilation of specifications package DATA_SET_CTRL...
  No compilation errors.

  Compilation of RESULTS package specifications...
  No compilation errors.

  Compilation of specifications package APP_CUSTOM...
  No compilation errors.

  Compilation of the package APP_CUSTOM body...
  Compile error on the APP_CUSTOM package body:
  PL/SQL ERROR 302 to line 24, column 19
  component 'Disabled PERSON' must be declared
  PL/SQL ERROR on line 24, column 5 0
  Declaration ignored
  PL/SQL ERROR on line 30, column 5 201
  identifier ' APP_WINDOW. CLOSE_FIRST_WINDOW' must be declared
  PL/SQL ERROR on line 30, column 5 0
  Declaration ignored
  PL/SQL ERROR 201 to line 43, column 5
  identifier ' APP_WINDOW. SET_WINDOW_POSITION' must be declared
  PL/SQL ERROR at line 43, column 5 0
  Declaration ignored
  PL/SQL ERROR 201 at line 46, column 3
  identifier ' APP_WINDOW. SET_TITLE' must be declared
  PL/SQL ERROR at line 46, column 3 0
  Declaration ignored

  Compilation of specifications package IPDP_TREE...
  No compilation errors.

  Compilation of the package IPDP_TREE body...
  Compile error on the IPDP_TREE package body:
  PL/SQL ERROR at line 43, column 26 201
  identifier ' APPTREE. COLLAPSED_NODE' must be declared
  PL/SQL ERROR 0 to line 43, column 3
  Declaration ignored
  PL/SQL ERROR on line 50, column 26 201
  identifier ' APPTREE. TREE_NAME' must be declared
  PL/SQL ERROR 0 in line 50, column 3
  Declaration ignored
  PL/SQL ERROR at line 103, column 39 201
  identifier ' APPTREE. TRIGGER_NODE_USER_VALUE' must be declared
  PL/SQL ERROR at line 96, column 3 0
  Ignored SQL statement
  PL/SQL ERROR on line 109 column 18 201
  identifier ' APPTREE. TRIGGER_NODE_TYPE' must be declared
  PL/SQL ERROR on line 109 column 3 0
  Declaration ignored
  PL/SQL ERROR on line 117, column 13 201
  identifier ' APPTREE. TRIGGER_NODE_LOW_VALUE' must be declared
  PL/SQL ERROR on line 117, column 5 0
  Declaration ignored
  PL/SQL ERROR on line 144, column 20 201
  identifier ' APPTREE. TRIGGER_NODE_HIGH_VALUE' must be declared
  PL/SQL ERROR on line 144, column 5 0
  Declaration ignored
  PL/SQL ERROR on line 148, column 26 201
  identifier ' APPTREE. TREE_NAME' must be declared
  PL/SQL ERROR on line 148, column 3 0
  Declaration ignored
  PL/SQL ERROR 201 to 159, column 6 line
  identifier ' APPTREE. TRIGGER_NODE_TYPE' must be declared
  PL/SQL ERROR on line 159, column 3 0
  Declaration ignored
  PL/SQL ERROR 201 at line 184, column 6
  identifier ' APPTREE. TRIGGER_NODE_TYPE' must be declared
  PL/SQL ERROR at line 184, column 3 0
  Declaration ignored
  PL/SQL ERROR at line 264, column 15 201
  identifier ' APPTREE. FIND_TREE_NODE' must be declared
  PL/SQL ERROR on line 264, column 2 0
  Declaration ignored
  PL/SQL ERROR on line 272, column 28 201
  identifier ' APPTREE. TREE_NAME' must be declared
  PL/SQL ERROR on line 272, column 5 0
  Declaration ignored
  PL/SQL ERROR 201 at line 275, column 16
  identifier ' APPTREE. FIND_TREE_NODE' must be declared
  PL/SQL ERROR at line 275, column 3 0
  Declaration ignored
  PL/SQL ERROR line 282, column 28 201
  identifier ' APPTREE. TREE_NAME' must be declared
  PL/SQL ERROR on line 282, column 5 0
  Declaration ignored
  PL/SQL ERROR 201 at line 290, column 6
  identifier ' APPTREE. ACTION "must be declared
  PL/SQL ERROR on line 290, column 3 0
  Declaration ignored

  Compilation of specifications package DATA_SET_CTRL...
  No compilation errors.

  Compilation of the package DATA_SET_CTRL body...
  Compile error on the DATA_SET_CTRL package body:
  PL/SQL ERROR on line 30, column 7 201
  identifier ' APPTREE. NEW_VIEW_BY' must be declared
  PL/SQL ERROR on line 30, column 7 0
  Declaration ignored
  PL/SQL ERROR 201 to line 43, column 7
  identifier ' APP_ITEM_PROPERTY. SET_PROPERTY' must be declared
  PL/SQL ERROR at line 43, column 7 0
  Declaration ignored
  PL/SQL ERROR 201 at line 46, column 7
  identifier ' APP_ITEM_PROPERTY. SET_PROPERTY' must be declared
  PL/SQL ERROR at line 46, column 7 0
  Declaration ignored
  PL/SQL ERROR on line 97, column 14 201
  identifier ' APP_FORM. QUIETCOMMIT' must be declared
  PL/SQL ERROR on line 97, column 11 0
  Declaration ignored

  Compilation of RESULTS package specifications...
  No compilation errors.

  Package body compiling the RESULTS...
  No compilation errors.

  
  Compilation errors are produced.

  
  Form not created

  --------------------------------------------------------------------

  DB version: 11.2.0.3

  Apps version: 12.1.3

  Operating system: hp - ux B.11.31 U ia64

  Kindly advice.

  Kind regards

  Ahmed

  Ahmed,

  It's something should be set by your development team.

  If CUSTOM.pll has been changed, you can simply determine what has changed (unless it is documented), and you will need to contact your developers to see what has changed. If you have any other instance on the same level of Group of patches, then you could replace the CUSTOM.pll file and see if it helps.

  Forms must be compiled successfully on the layer node client (using Forms builder) before moving them to the server and compile again.

  Thank you

  Hussein

• Internal error detected, cannot generate the eBook (11 Robohelp)

  Hello

  I'm new to Robohelp (I've been a user long term of Framemaker for print publications).

  The generation of Ebook of the carrycot single Source Layout has stopped working and I get this message: internal error detected, cannot generate the eBook (11 Robohelp eBook preprocessor 11.0.0.179)

  Compilation G:\Development\Course Development\CONE-online\Characteristics-of-light\Robohelp\Characteristics-of-light\Charac light\ Ta! SSL! \eBook\! epub_tmp_folder_0\Characteristics_of_light. EPUB...

  Preparation create eBook...

  Compensation output folder...

  Preparation of files for eBook...

  Copying files...

  Updating files...

  Finish the preparation in 4 seconds

  Initializing the compiler...

  Generation of output - eBook eBook Manager (11.0.2.240)...

  Transforming XHTML topics...

  About XHTML preparation "Questions_about_light.xhtml"...

  About XHTML preparation "The_Electromagnetic_Spectrum.xhtml"...

  Preparation of subject XHTML ' Using_wave_properties/Interferometry.xhtml '...

  Preparation of subject XHTML ' Using_wave_properties/Mach - Zehnder_modulators.xhtml '...

  Preparation of subject XHTML "Using_wave_properties/The-wave-properties-of - light .xhtml"...

  Preparation of subject XHTML ' Wavelengths_and_Frequencies_in_optical_networks/ITU_bands.xhtml '...

  Preparation of subject XHTML ' Wavelengths_and_Frequencies_in_optical_networks/Light_sources_and_wavelengths.xhtml '...

  Preparation XHTML topic ' Wavelengths_and_Frequencies_in_optical_networks/Wavelengths_and_Frequencies_in_fibre_opt ics.xhtml '...

  Preparing to Table of contents...

  Output EPUB 3...

  EPUB 3 output generation failed.

  Internal error occur, could not generate the eBook.

  Could someone give me advice on what to do to fix? What have I done? I tried to install Adobe digs Eds 4 and it seems stop working after that, but I tried to uninstall that and it is always the same. I also tried to reinstall TCS5. Reactive out of HTML5 still works ok.

  Thanks in advance,

  Sarah

  It could be a longshot, but try to move the project to a place where the path is shorter. I had a similar problem (I think I got the same error a few months ago, but I can't be 100% certain), where the epub was not able to generate, and I tried to move my project to another location where the path to the files was shorter. This solves the problem for me.

• Cannot generate valid OCD!

  I can't believe CC InDesign for Mac cannot generate ePub TOC! All securities chapter in the table of contents shall be replaced by the title of the book, adding numbers to the end, like "Book Title", "book title-1", "book-2 title", "title of book-3", etc. so I can't submit the result to the iBook store... ' ".

  Is there and workaround?

  Generate a table of contents really works for me in InDesign CC. As Ellis says, make sure you are creating a Style of table of contents and reference table of contents Style name in the EPUB export dialog box.

  Example below:

  

  

  If this does not work, restore your InDesign preferences.

• RH6 HTML - cannot generate WebHelp

  I use RoboHelp HTML - RH6. I recently cancelled generating WebHelp, after that I started and forgot to move from the skin. Now, when I try to generate WebHelp, the screen seems to hang for a while but never starts generating. I tried to re-opening and closing the project. I was also able to generate FlashHelp after, but still cannot generate WebHelp. Any ideas?

  Thanks in advance.

  Try to create a new page layout.

  See www.grainge.org for creating tips and RoboHelp

• Cannot generate the Word .doc

  100 classic page chm project compiles successfully. You will need to create the document Word for graphic designer do a nice .pdf. Get warnings (style not defined, mapped to normal). Can not find the style not defined in the code, but see some class = msonormal elements. Then, I get error "Word Document became corrupted when you attempt to add a topic malformed". Then, RoboHelp is unable to deal with a subject. Then it has Fatal Error "Word Document got corrupted" and she is abandoned. A little more of these erros and he cannot generate the rest of the Word document.
  
  Cannot search this forum for "malformed", either. Get a "Variable FTVAR_RESULTTYPE is undefined." Message.
  

  Cannot find the whole chain, but the deletion of any reference MSObookmark did the trick, thanks

• Pages pull up of certain documents and States "it cannot be opened for some reason any."

  I use the Pages more up-to-date on my macbook, but whenever I have pull up some documents, he says that he cannot find it for some reason any? I had no problem before, but all of a sudden does not work?

  If you get a dialog box that says essentially that "Pages cannot open this document for some reason any", you're actually done with this document because he suffered internal damage. Get an old copy of your Time Machine backup.

• 'Cannot be fed to the internal Bluetooth module.

  'Cannot be fed to the internal Bluetooth module.
  "Bluetooth is not ready."

  Bluetooth is missing in Flash (Fn + F8) cards
  but
  Everything is ok in Device Manager.

  I started my laptop L755 using F8 > safe mode > windows Bluetooth acknowledged as soon as it started. That's all there is to it.

  Muhammad Hussein M

  Hello

  Are you using the original pre-installed OS that you got with your laptop?
  Since when you noticed this problem?

  It is not easy to understand the problem described. I can't imagine that this happens suddenly without reason.
  Can you please send more details on all of this?

• Cannot install itunes for windows - error: Apple Application Support is required to run Itunes Helper. Uninstall and reinstall (as I did twice)

  Cannot install itunes for windows - error: Apple Application Support is required to run Itunes Helper. Uninstall and reinstall (as I did twice)

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• Possible security for the Web-based Configuration

  My colleagues and I found something very interesting today... Despite having configured the FTP security settings (which have been confirmed to set up and in funcitoning. I can't open an FTP session to our remote target without specifying a username admin and the password) If you open the configuration tool based OR web in a browser, you can send via FTP to and from the target using the file remote browser without being connected to all! Everyone knows this?

  Apparently, these permissions are separate from FTP, but you can define these special permissions on the page of the security configuration for the web-based configuration utility.

• Update for Windows 7 security for systems x 64 (KB2393802) + update for Windows 7 for x 64-based systems (KB2454826) error: 8007371B

  Original title: Security Update for Windows 7 for systems x 64 (KB2393802) + update for Windows 7 for x 64-based systems (KB2454826)

  Above could not install after several tests and reboot. Error: Code 8007371B

  Could someone kindly help a solution?

  Hello

  You can run the update for your computer system preparation tool and check if that helps you install the updates. Follow the link below.

  http://support.Microsoft.com/kb/947821

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Ideas: Insert an error code or give a brief description of what you are trying to accomplish or fix.__Failures install windows update for Windows 7 for x 64-based systems (KB2345886)

  I'm having problems with my HP laptop and updated KB2345886 who don't want to not install. I reinstalled it and to start my computer it goes up to 75% and fails.  I ran will fix problems with Windows Update but troubleshooting couldn't identify the problem. I can't go back to restore Windows installed date of origin being on 15 October. When the update ran for the first time it was looking for Microsoft Works 9.0 disk I did not because it was preinstalled on my computer. I cancelled and uninstalled the app, but I still get the error. I don't know if the update is looking for a component of Microsoft Works 9.0 in the registry.

  Additional information:

  Update for Windows 7 for x 64-based systems (KB2345886)

  "WindowsUpdate_8007000D" "WindowsUpdate_dt000"

  Update for Windows 7 for x 64-based systems (KB2345886)

  Installation date:? 11 /? 24 /? 2010 11:39

  Installation status: failed

  Error details: Code 80004005

  Update type: Important

  Install this update to help strengthen authentication information in specific scenarios.

  After you install this item, you may have to restart your computer.

  Help, please.

  Thank you.

  Jesus Romero

  (And Norton) McAfee applications are known to not uninstall (or upgraded) themselves.

  1. download the McAfee Consumer Product Removal, save it to your desktop tool: http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. click right on the file saved in #1 above, and then select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.

  4 reset the IE8 advanced settings by http://windows.microsoft.com/en-US/windows7/Reset-Internet-Explorer-settings

  5. open IE8 32 bit (only!) to http://support.microsoft.com/kb/971058 & run it in DEFAULT and modes difficulty then AGGRESSIVE. [1]

  6. restart a last time & test.

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft