Cannot get 3050 again router connected a wireless

Similar Questions

• Cannot get photosmart 5520 to connect wireless

  I bought a photosmart 5520 4 days ago and could not get it connected to my wireless network. After fishing trawl of the forum, I contacted HP support. After a thorough analysis of the printer, the technician decided it was likely to be the network card and it should be replaced.

  Now, I had my second printer and after implementation - it connected to the network and printed. I then decided to set up E-Print and the connected printer and downloaded some software and printed information to allow me to configure connected HP.

  I did this and then the printer is off. The printer is restarted, it will connect any.

  I tried to reset the default settings of the network, and then, it recognizes the network and by pressing the button on the router WEP key, it tries to connect - but fails every time.

  I have reset the printer / router / computer but nothing resolved.

  If it had not worked the first time, I suspect the network - but when it worked, it was fine.

  Help, please

  There is no WEP button on a router.  It is the WPS button... and do not use it.   Follow the manual to connect to your SSID via Infrastructure mode using a router.  Use the wizard to be installed on the front panel.

• Cannot get my 3Connectez to connect it is on monthly payment

  Unable to connect to the internet, [3Connectez] and internet explore

  Hi Alan,

  Thanks for posting the question in the Microsoft Community!

  1. do you get an error message? If Yes, what is the full and exact error message?

  2 has there been any changes made on the computer before the show?

  Method 1:

  First of all, I suggest for the link and try to run the troubleshooter and check if it helps.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:

  Check the link and see if it helps:

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

  Method 3:

  Try to update the network drivers and check if it helps.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  If the problem is not resolved, please respond with more information, and we will be happy to help you.

  Thank you.

• cannot parse through a router connection with HP software

  My 7590 printer is installed via a router.  The part of the ANALYSIS of the installation do not imstall the scan function.

  Printing/scanning HP doctor does not solve the problem

  Hello dickkaiser

  It seems that the printer software is not installed correctly. Follow the instructions below to "scrub" or to "clean" your computer HP software. Then you can reinstall the printer as if it were the first time. If you receive errors during the installation please take a screenshot and upload it to your next post.

  Of the Original installation CD:

  1. Insert the CD in the drive and then cancel Setup

  2. open my computer and click right then on the CD from the drive and select open

  3 open the Util folder

  4 open the CCC folder

  5. run the L4uninstall.bat

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://get.Adobe.com/flashplayer/

  9 download drivers and full software features

  OfficeJet Pro L7590 Full Feature software (Windows 7)

  10. run the download to reinstall the printer

  If the software has been downloaded and extracted to your system:

  1. type % temp % in the field of race

  2. Locate and open the folder starting with 7z (example: 7zS2356)

  3 open the Util folder

  4 open the CCC folder

  5. run the L4uninstall.bat

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://get.Adobe.com/flashplayer/

  9 download drivers and full software features

  OfficeJet Pro L7590 Full Feature software (Windows 7)

  10. run the download to reinstall the printer

• Cannot get signal when you connect the TV to HDMI port.

  * Original title: HDMI Signal

  Hello. My nam is Kieu. I have a problem and and we hope you guys can helo me. I just bought a Gateway desktop all-in-one computer and tried to connect it to the TV via the HDMI port, but I could not get signal on my TV. Help, please.
  Thank you very much

  Hi David,

  Thanks for posting your query in Microsoft Community Forum!

  According to the description of the problem, it seems that you are unable to get the signal when you connect the TV to HDMI port.

  I will certainly help you with this issue.

  Here are some steps that you can try in order to solve the problem.

  Step 1. First you need a video cable to make the physical connection. For a better image quality, you need to connect the computer to the TV using standard VGA ports or via DVI to HDMI Cable provided your TV supports these ports.

  Step 2. Open thedisplay settings' ' in your Vista computer and Activate the output to the TV screen. You can reflect the content of your computer on the TV or extend the display as a double screen control.

  Step 3 Pick up your TV remote and switch to "External inputs" in the menu. You need to change the value by default "Video 1" to a different selection which may be "HDMI 1" or "video 2" depending on how you made the connection. "

  Important: Make sure you connect the cable to the TV before turning on the computer, because sometimes it may not recognize the external display.

  You may also change the resolution of your TV screen using the display settings in your panel of control remains the image may appear distorted.

  For more information, see the article.

  Connect your computer to a TV

  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-your-computer-to-a-TV

  If anything in my post is not clear or if you have any questions on Windows, feel free to let us know. It is our pleasure to be of service.

• Cannot get my WRT54GS router to work

  
  

  Thank you very much for this help... it worked.  Can advise you on how I can get it "safe", that is, so that it said "this wireless network is secure?"   I think it need a password somewhere, but I don't know where.  All the best.  T.

• Cannot get my zineb to connect to my email.

  Tried a new Yahoo email account - says the name of username/password error

  I am using the Yahoo app icon - update - received a message that my account should be checked - it seems that the problem is on the side of Yahoo.  I got an e-mail message from Yahoo asking me to verify my account.  Apparently, there may be up to 24 hours to create an account with them.

• Camera Foscam wireless to the Valet M20 router connection.

  Try to install two cameras Foscam on my PC (windows 7). The "OUTSIDE" camera is model F19805W and 'The INSIDE' a F19831P model. The works of a single 'INSIDE' ok as a device connected wireless; However, cannot get 'OUTSIDE' unit to connect the Cisco Valet Plus M20 router wireless. 'OUTSIDE' it connects ok directly connected to the router. Have had two phone conversations with Foscam support and they never stop checking out me with the help of Cisco. This is editing information for both cameras.

   

  Device status:

                 Status = success for both cameras NTP

  DDNS = disabled for both cameras status

  UPnPStatus - disabled for both cameras

  WiFi status = connected to WhiteBear (INSIDE) (OUTSIDE) not connected

  The session state:

  Username / IP = joec01 for both cameras / 192.168.1.149, 192.168.1.149 and 192.168.1.101 for both cameras

  address joec01 IP/username extra / 192.168.1.101 for (OUTDOOR)

  IP configuration:

  Get the IP of the server DHCP = check for both cameras

  Wireless settings:

  List of networks: SSID = WhiteBear of both cameras

  Encryption = WPA/WPA2 for both cameras

  Password = same for both cameras

  PPPoE use PPPoE = disabled for both cameras

  DDNS = enable DDNS disabled for both cameras

  = UPnP activate UPnP 'no' for both cameras

  Port: HTTP Port = 88 of both cameras

  Port HTTPS = 443 for both cameras

  ONVIF Port = 888 for both cameras

  P2P (the OUTDOOR unit is not that a P2P device... below relates to the INTERIOR only.

  UID = FFW99WJPXVYV2G6MURD1

  Select the checkmark = P2P

  P2P port = 59898

  Foscam support tells me that the router does not accept the WhiteBear password for the OUTSIDE camera (it is the same as that used for INSIDE camera and smart phones).

  Any ideas? Similar problems were reported with the Foscam cameras?

  Joe

  Try to set M20 «WPA2 only» wireless security

• I can connect to my wireless router, but cannot get internet connectivity via Wireless. If I connect the cable to the port on the router, I get internet connectivity.

  Wireless router / Internet problems

  I am running Windows Vista Home Edition with Security Essentials.  I can connect to my wireless router, but cannot get internet connectivity via Wireless.  If I connect the cable to the port on the router, I get internet connectivity.  Is there a firewall setting that could cause this problem?

  Hello

  Your router could be suspicious here, you have successfully updated its firmware as a possible solution? And I would like to
  Update your WiFi drivers on computers. How you are positioned in the router? Are there
  obstacles in the path?

  Actually try updating your driver and disabling the network logon.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Satellite A505 - sees, but cannot connect to, Wireless Router Win7

  I have a laptop Toshiba A505-S6980 running the 64 bit version of Windows 7.

  It worked fine a few months previously, to connect wireless to my O2 2 wireless router (the notebook has a REALTEK RTL8191SE wireless card).

  I also have a desktop running XP computer that I use to connect to the same router. While on the desktop, I noticed several weeks ago that the router has been implemented with no WPA and WEP security, so I decided to change the router to WPA. The desktop PC was fine with this, but the laptop complained and wouldn't connect, failure of authentication and just stating "unable to connect to xxxxx". At the time I assumed it just couldn't handle the WPA authentication for some reason any and decided that I would probably turn to WEP to a later date to make it work again. At some point, I remove a ' O2 Connection Manager ", which had been installed when I bought a 3G dongle O2, where he has confused the issue, but it made no difference. In the meantime, I tried to connect the laptop using a wired connection and worked well.

  I now (a few weeks later) decided that I wanted to use the wireless laptop then redefine the router to WEP expect this to work, but it didn't. As with WPA, he did not get past authentication when I put the key to security in. So, I try to understand the problem...

  What happens;

  (1) the wireless laptop sees my router (and neighbors), but just cannot connect.

  (2) I can connect with a laptop computer on the same USB wireless adapter.

  (3) I can connect the laptop to the router using a wired connection, and there is no problem.

  (4) my desktop running XP computer can connect to the router as WEP or WPA Wireless if the router is ok.

  (5) this worked several weeks ago!

  What I've tried;

  (1) I have installed the latest REALTEK RTK8191SE driver.

  (2) I tried to disable the security on the router, no joy.

  (3) I deleted all the profiles of network on the laptop.

  (4) I have tried with Norton antivirus and firewall disabled (but have not uninstalled) but no help.

  (5) I tried to do a restore of the system to the closest possible point and no help.

  (5) I uninstalled the wireless network adapter and its driver in Device Manager... Windows 7 can see the of it after a reboot and re - installed (using the old default driver), but it does not work. Then, I re-installed the latest version from REALTEK to ensure that it is up-to-date.

  What's weird is that

  (1) it works ok using the wireless USB adapter

  (2) the integrated REALTEK wireless adapter works to a point such that it can SEE my router, connect simply do not

  (3) authentication failure almost instantly

  My suspicions are that an automatic update of Windows 7 or the O2 Connection Manager has somehow screwed it upward. I have uninstalled the O2 connection manager and tried to uninstall the automatic updates but there are many of them and I don't know how far back, I need to go. Also, because it authentication immediately, it seems that it is not giving him a chance to actually work.

  Does anyone have any ideas on how I can proceed or had a similar problem?

  This is a really silly situation. In any case, I recommend you to use the Toshiba WLAN drivers only.
  I put t know what Realtek module is inside but try please install driver WLAN http://aps2.toshiba-tro.de/wlan/?page=downloads

  All that you have done is logic and I think I will try the same thing.
  Have you tried to connect to WEP or WPA is disabled? I mean free WLAN without protection.
  Have you tried to connect your laptop to a friend's router?

  I really put t know what is the problem here but there are a few bad setting it.

• DeskJet F4580: new router cannot get connection and can not find the whole upward on macbook

  I had to get a new router as I have had problems with my fixed internet internet problems but now my printer does not work unless I connect with the usb cable, I have tried everything including the abolition of the printer, which now, I deleted the setting up of information out of my macbook and can not install the printer please help it worked very well with my other router...

  Hey @gingerjean1,

  Welcome to the HP forums! I hope you enjoy your stay here.

  I see that you have replaced your router and are having trouble with your Deskjet F4580 of connection to the network. I can help you with that.

  As you use Macintosh 10.7 I recommend the use of a Windows PC to install the printer on and then to add to your wireless network. If this isn't a practical option there are a number of things we could try.

  Apple Software Update

  1. Click on your Apple icon and go to software updates.
  2. Install the available updates.
  3. Apple's HP printer driversdownload.

  If during the installation there is no wireless options then:

  1. Go to your Apple system and print and Scan preferences icon.
  2. Double-click your printer icon on the left side of this screen.
  3. In the pop-up window, click on settings, utility, and then click Open Printer Utility.
  4. In this new window, you must have a wireless tab along the top, that you can click.
  5. On the left side, we are looking for a wireless configuration wizard.
  6. Run the Wireless Setup Wizard to add the printer to your wireless network.
  7. Once the printer is connected, disconnect the USB cable to the back of the printer.
  8. Return to the Apple, system, print, and Scan preferences.
  9. Click on the button "+" at the bottom left.
  10. In this window, select your printer.
  11. If there is a line indicating the use that says Airprint click to select your printer in the list instead.
  12. Click on Add.
  13. Try to print.

  Ad-Hoc

  If the method above does not allow you to connect the printer wireless, then it can work.

  1. Perform a factory reset the printer. I will include guidance on how to do so shortly in a private message.
  2. Turn on the printer.
  3. Press the button on the front of the printer wireless.
  4. Wait for about a minute.
  5. On your Mac or another wireless device, you should see a network with a name similar to "HP Deskjet F4500 XX Print" listed. To connect to this network.
  6. Press and hold the scan button (the icon of the printer under the red x on the printer) for 10 seconds. When you release the printer should print a test wireless report.
  7. On the device you connected to the printer, open a web browser and type the IP address in the bar of address exactly as shown on the test report.
  8. You should have a network tab along the top of this window.
  9. On the left side, we are looking for a wireless configuration wizard.
  10. When you run that must connect the printer to your wireless network.
  11. Once the printer is connected, disconnect the USB cable to the back of the printer.
  12. If you have connected your Mac to the printer above and then reconnect the printer to your wireless network now.
  13. Return to the Apple, system, print, and Scan preferences.
  14. Click on the button "+" at the bottom left.
  15. In this window, select your printer.
  16. If there is a line indicating the use that says Airprint click to select your printer in the list instead.
  17. Click on Add.
  18. Try to print.

  If it allows you to connect your printer to your wireless network and then do other forum users know clicking on accept as Solution below my post. Even if you have any other questions please let me know.

  I hope this helps and I hope you have a nice day!

• I'm trying to get an 8500 a connected via the wireless, but it does not link to d-link dir-615 router.

  The printer connects to the same router through the wired port but will not get a valid address using the wireless.  The IP is 169.254.140.246 in the wireless network test report, although everything is named PASS

  I changed from WEP to WPA and now everything works.  Now, to spend a few hours by changing everything in the House.

• officejet j6480 again router wireless connection

  We have a j6480 officejet all-in-one and we have recently changed wireless routers and now computers can not find the wireless printer. How do we get computers to recognize the printer or vice versa. Thank you

  The printer can be associated with the new router with the wireless configuration wizard.  Press the setup button and navigate to the network and then the wireless configuration wizard.  You must know the SSID of the new router and also all security settings.

  Another method is to use the CD of the software on the computer:

  http://support.HP.com/us-en/document/c01311135

  Have set you or change the default SSID and security on the new router settings?

• HP Deskjet 3050 - unable to connect to the WPA secure wireless network

  Hello

  My first post here so please excuse any misstep on my part.  I bought this HP Deskjet 3050 a week ago and have since been war with it.  I would be really grateful if someone could possibly give advice on how I can solve this problem.

  I am unable to connect the printer to my secure wireless network, even if the other computers, cell phones, etc. are connected without problem.  I tried WPA, WPA2 and WPA2-Mixed modes with the same failure security. Specifically, the 66% reached Connection Wizard, then displays the error that the wizard can not find/network printer.  If I disable the security, the printer connects very well.

  I use a Linksys WRVS4400N router with firewall and associated firewall disabled settings.  The router broadcasts on 802. 11 g / N mixed mode.

  I install the software provided on the CD for installation on a Windows XP SP3 System.  I confirmed that the PC and the printer are connected to the network are the same.

  The issue as well, if you will allow me: I have not yet tried these drivers, but I see there are any updated drivers for the printer in date from 14/12/2010.  The release notes indicate the improvement of networks, but do not develop beyond that.  Does anyone know if there was a known problem with the connection to secure networks that has now been corrected?

  Finally, just a note that I am partially blind and using a screen on all systems reader.  I'll try my best to be as helpful as I can to please forgive me if I can't find the settings, etc. on screen and sometimes need help for a little more detail.

  Thanks in advance for your help, I really enjoyed.

  Have a nice day,

  All the best for now and take care,

  Hussein.

  It is not the fact that it is impossible, is the fact that this was not done, yet.

  Hello

  first of all, my apologies for the delay getting back to you.  Poor health means that I had little time or want to do great thing on the side of the computer of htings.

  In any case, I am please to say the problem with the HP 3050 failing to connect to my network is now resolved.  There seems to be a bug with the installer, and that seems to include the version the most recent publication Dec 2010.

  To resolve this problem, I did the following:
  1. disable all security for the network options, so it's just an open network.
  2. connect the HP 3050 to the network by using the installation wizard. This time it connected OK for me.
  3. Locate the IP address of the printer.  I used the table of customer list accessed by my router interface. You may be able to get this through the printer on the menu screen, but as I am partially blind, it wasn't an option for me.
  4. Enter the control panel of the printer to http://ip.address.of.printer for example http://192.168.2.108
  5. under Advanced options, configure the network settings, including the password and the Security Protocol.  Don't forget to enter the SSID of the network exactly as it is configured on the router.
  6. apply settings, disconnect from the control panel of the printer.
  7 log in the router configuration panel and re-apply the security options.  Make sure they match these match those entered for the printer.

  I hope it will be useful to others in the same position.

  Thanks again for your time.

  Best,

  H.

• My laptop cannot connect to wireless internet. Ethernet works fine. Wireless is enabled on the laptop.

  original title: portable wireless problems

  Hi guys, my laptop cannot connect to wireless internet. I tried to use ConfigFree Diagnostic tests already installed on my computer, reset the router, and even taking on the router for 30 seconds and put it to. On my laptop wireless switch is turned on, too. Is the only way I can connect to the internet via an ethernet cable and I started to disconnect from the wireless internet just yesterday. I know that my router is not the problem because I have a laptop connected to her brother. Also, I tried the FN + F8 key on my Toshiba laptop. Thank you in advance.

  Hello

  Is this also your thread with a different name?

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-performance/wireless-Internet-on-laptop-not-working/aedbda38-a56e-E011-8dfc-68b599b31bf5

  ====================================================================

  To do a hard reset on the router and the modem, you must feed their STOP, wait 3 minutes,
  then then turn on the modem on - when it comes back - router - when it is set to zero
  computers.
  ----------------------------------------------

  Anyway the same answer applies: update WiFi driver that something has probably
  He touched. Make sure that the wireless device is turned on, if there is a switch on the computer.
  Many Toshiba have a WiFi switch on the front or side.

  Update the driver WiFi, use the wired (NIC) to download the driver or do it on another
  system and your transfer on removable media such as CD, DVD or a USB key.

  Control Panel - device - network - WiFi note the brand manager and full
  model information - double click - writing tab Drivers version - then power management tab uncheck "allow the computer to turn off this device...". »

  Then on the tab driver, click Update driver (this can do nothing as MS is far behind
  drivers of certification) - then right click on the device - UNINSTALL - REBOOT - this will
  update the driver stack.

  Go to system Maker and search for the WiFi Driver updated - download - SAVE - go to
  where you put it - make a right click on it - RUN AS ADMIN - REBOOT

  Then go to the site of the manufacturer of the device and get even more recent (Realtek, Intel, or one that makes
  the device) and try the install again.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  ====================================================================

  Check with Toshiba support, their drivers online (update or reinstall) and their forums.

  Toshiba - Forums
  http://laptopforums.Toshiba.com/

  Toshiba - Contacts
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

  Toshiba - drivers - access your model
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba - Support
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  I hope this helps.