Cannot get my zineb to connect to my email.

Similar Questions

• Cannot get 3050 again router connected a wireless

  My router DSL of ATT went out on me a few weeks ago, and they sent a replacement.  I got a dozen devices connected to the new but cannot get the 3050 a j611g connected.  I tried everything I could find...

  1 uninstalled all HP software and going through Setup again.

  2 reset the default printer network settings and repeat step 1.

  This includes, of course, passing by the "printer setup and software ' program on my computer."  Nothing works.  I found these instructions on the site of HP...

  To reconfigure your settings on a printer wireless have no control panel wireless Assistant:

  1. Insert the CD into your computer.
  2. Select reconfigure network settingson the Welcome Back screen.

  The problem is that I don't get to "Reconfigure network settings" as an option when I put the installation disc in my computer.  No 'Welcome Back' of the screen or the other.  Any help would be appreciated.

  Appreciate the help of everyone.  But it must have been a material situation. After tons of calls and a few broken promises, I finally got a case manager who took care of me and sent me another printer.  Saved my faith in HP.

• Cannot get photosmart 5520 to connect wireless

  I bought a photosmart 5520 4 days ago and could not get it connected to my wireless network. After fishing trawl of the forum, I contacted HP support. After a thorough analysis of the printer, the technician decided it was likely to be the network card and it should be replaced.

  Now, I had my second printer and after implementation - it connected to the network and printed. I then decided to set up E-Print and the connected printer and downloaded some software and printed information to allow me to configure connected HP.

  I did this and then the printer is off. The printer is restarted, it will connect any.

  I tried to reset the default settings of the network, and then, it recognizes the network and by pressing the button on the router WEP key, it tries to connect - but fails every time.

  I have reset the printer / router / computer but nothing resolved.

  If it had not worked the first time, I suspect the network - but when it worked, it was fine.

  Help, please

  There is no WEP button on a router.  It is the WPS button... and do not use it.   Follow the manual to connect to your SSID via Infrastructure mode using a router.  Use the wizard to be installed on the front panel.

• Cannot get signal when you connect the TV to HDMI port.

  * Original title: HDMI Signal

  Hello. My nam is Kieu. I have a problem and and we hope you guys can helo me. I just bought a Gateway desktop all-in-one computer and tried to connect it to the TV via the HDMI port, but I could not get signal on my TV. Help, please.
  Thank you very much

  Hi David,

  Thanks for posting your query in Microsoft Community Forum!

  According to the description of the problem, it seems that you are unable to get the signal when you connect the TV to HDMI port.

  I will certainly help you with this issue.

  Here are some steps that you can try in order to solve the problem.

  Step 1. First you need a video cable to make the physical connection. For a better image quality, you need to connect the computer to the TV using standard VGA ports or via DVI to HDMI Cable provided your TV supports these ports.

  Step 2. Open thedisplay settings' ' in your Vista computer and Activate the output to the TV screen. You can reflect the content of your computer on the TV or extend the display as a double screen control.

  Step 3 Pick up your TV remote and switch to "External inputs" in the menu. You need to change the value by default "Video 1" to a different selection which may be "HDMI 1" or "video 2" depending on how you made the connection. "

  Important: Make sure you connect the cable to the TV before turning on the computer, because sometimes it may not recognize the external display.

  You may also change the resolution of your TV screen using the display settings in your panel of control remains the image may appear distorted.

  For more information, see the article.

  Connect your computer to a TV

  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-your-computer-to-a-TV

  If anything in my post is not clear or if you have any questions on Windows, feel free to let us know. It is our pleasure to be of service.

• Cannot get my 3Connectez to connect it is on monthly payment

  Unable to connect to the internet, [3Connectez] and internet explore

  Hi Alan,

  Thanks for posting the question in the Microsoft Community!

  1. do you get an error message? If Yes, what is the full and exact error message?

  2 has there been any changes made on the computer before the show?

  Method 1:

  First of all, I suggest for the link and try to run the troubleshooter and check if it helps.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:

  Check the link and see if it helps:

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

  Method 3:

  Try to update the network drivers and check if it helps.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  If the problem is not resolved, please respond with more information, and we will be happy to help you.

  Thank you.

• Cannot get digital ID

  * - Original title - digital ID

  Cannot get the digital ID when accepting/sending email via Windows Mail. How do I do that >

  Hello

  1. did you make the changes recently hardware or software on the computer?

  2. What is the error message you get when the digital ID fails to get?

  Try the steps in this article.

  Using digital IDs to sign or encrypt Windows Mail messages: http://windows.microsoft.com/en-US/windows-vista/Using-digital-IDs-to-sign-or-encrypt-Windows-Mail-messages

  I hope this helps.

• Cannot get mail that failed to connect to my server

  Cannot get mail

  Failed to connect to my server

  Hello parkspa,

  Thank you for using communities Support from Apple. I know have a problem with Mail on your iPhone, it's not what you expect. The good news is the next article will be useful for troubleshooting and solving your problem and get email working again on your iPhone:

  Get help with Mail on iPhone, iPad and iPod touch

  See you soon!

• cannot get into my email inbox. a message appears, your xfinity connect session has expired due to inactivity. Comcast said that it comes to firefox. I have a mac.

  cannot get into my email inbox. a message appears, says your xfinity connect session has expired due to inactivity. Comcast says it's a firefox issue. I have a mac.

  This can be caused by corrupted cookies or cookies that are not sent or otherwise blocked.

  Clear the cache and cookies from sites that cause problems.

  "Clear the Cache":

  • Firefox > Preferences > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Firefox > Preferences > privacy > Cookies: "show the Cookies".

• Outlook: "cannot get mail" "cannot connect to the server.

  April 6 at 7:00 PM CST, my iPhone 5 running iOS stopped syncing with my Microsoft Outlook account 9.3.1.

  I did have problems with my iPhone sync with my Outlook email over the past 5 years so far.

  My Outlook account is to these servers-

  web mail:
  https://blu183.mail.live.com/

  for Windows Live Mail 2012:
  https://mail.Services.live.com/DeltaSync_v2.0.0/sync.aspx

  I tried to delete my Outlook account from my iPhone and re-establishment and the account Outlook 'checks' correctly - but this does not solve the problem.

  The iPhone keeps displaying a pop-up message:
  "Cannot get mail" "cannot connect to the server.

  My iPhone is syncing correctly with my Gmail accounts and iCloud.

  Also, I created my Outlook account on iPad to my daughter who is running iOS 8.1.2 and I have the same problem.

  This seems to be a situation of the Apple servers, do not sync with Microsoft servers.

  Thank you

  It seems that Outlook is to have questions, not only with iPhones but W10, see this thread:

  I lost all my contacts.

• Satellite L650 cannot get the Gigabit connection to switch

  I tried to connect to the Netgear gs108 gigabit switch but cannot get a connection of 100 Mb. have updated drivers Atheros AR8152 version 1.0.0.26 Win7 64 bit running but still no go.

  All ideas

  Thank you Rich

  Hey that's great that you fixed the problem yourself!

  If you have other questions you're welcome in the forum :)

• Cannot get my Presario C700 to connect to the internet only connects local

  I can't get my presario c700 to connect to the internet. get only the local connection. I tried using the website of compaq, microsoft, and atheros site. Nothing works. I downloaded a bunch of different drivers. I found several forums with links to the drivers who have helped, but when I click on them they cannot be found. Extremely frustrated. All my other devices connect completely so I know it isn't my router.

  Compaq Presario C700

  Atheros AR5007

  Hello:

  This driver should take care of this problem.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-108905-1&cc=us&DLC=en&LC=en&JumpID=reg_r1002_usen_c-001_title_r0004

• I installed Internet Explorer 8 and cannot get an internet connection...

  I installed Internet Explorer 8 and cannot get an internet connection using this program.  However, I get a connection very well when I surfed with Firefox.  I tried to disable the firewall and still no connectivity.  I am connected through a Netgear router with a hard line.  The signal is strong.  When I run a diagnostic on Internet Explorer, I get a message from the bed... WINDOWS CANNOT CONNECT TO THE INTERNET USING HTTP, HTTPS, OR FTP.  THIS IS PROBABLY CAUSED BY THE SETTINGS OF FIREWALL ON THIS COMPUTER.
  CHECK THE SETTINGS OF FIREWALL FOR THE HTTP PORT (80), HTTPS PORT (443) AND FTP PORT (21).
  YOU MAY NEED TO CONTACT YOUR INTERNET SERVICE PROVIDER OR THE MANUFACTURER OF YOUR FIREWALL SOFTWARE.
  No idea how to solve the connection on Internet Explorer?

  run malwarebytes.

  Also, try the following

  1. internet options and click the Connections tab
  2. and then click LAN settings and uncheck everything.
  3. and then click on apply & ok.
  MCP. MCDST. LVL 80

• I can connect to my wireless router, but cannot get internet connectivity via Wireless. If I connect the cable to the port on the router, I get internet connectivity.

  Wireless router / Internet problems

  I am running Windows Vista Home Edition with Security Essentials.  I can connect to my wireless router, but cannot get internet connectivity via Wireless.  If I connect the cable to the port on the router, I get internet connectivity.  Is there a firewall setting that could cause this problem?

  Hello

  Your router could be suspicious here, you have successfully updated its firmware as a possible solution? And I would like to
  Update your WiFi drivers on computers. How you are positioned in the router? Are there
  obstacles in the path?

  Actually try updating your driver and disabling the network logon.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• I have a HP G60-214EM laptop and cannot get it connected to my samsung 26 "smart tv. Can anyone help?

  I have a HP G60-214EM laptop and cannot get it connected to my samsung 26 "smart tv. Can anyone help?

  Hello Maureen56,

  I understand that you want to connect your TV to your laptop.

  To connect your computer to your TV HDTV using an HDMI cable, follow these steps:

  1. Locate the HDMI port on the back of your TV. It should be more than one, in order to choose the one that is otherwise unused. Note the port on which you choose.

• Updated to 10 MS today and my photoshop CS 6 requires reactivation. Cannot get Adobe by phone, online connection says unable to connect now, I have an authorizatiob code to make it work. Fequires online request code that I don't have an answer

  Updated to 10 MS today and my photoshop CS 6 requires the reactivation of use it. It automatically tries to get the activation code by going online, but it stops and says unable to connect at this time, "calling support '; but cannot get Adobe by phone and this phone says trail finally this product only is not supported by phone.  To start it requires an activation code and go online to get a response code requires a request for code I do not have. What is the next step? I just want to be back up and working. Thanks for any help.

  David

  Quickly find your serial number