Cannot get computer to record audio?

Similar Questions

• Cannot get DTS/multi channel audio via HDMI

  Hello
  I'm trying to connect my VAIO SVT15112CXS to my Bravia HDTV via HDMI to get multi-channel audio (DTS/DD) from my Bravia HT (connected to the TV via optical) with no luck at all.

  I have the same setup for PS3 works well, is it cable or equipment.

  I have already updated all the drivers.

  When the TV is not connected I don't get an Audio HDMI option in the playback devices (I checked to show disconnected devices / disabled) and when it is connected I do not get an option to change the configuration of stereo speaker.

  This way I get only Stereo sound.

  I tried passthough HDMI via ffdshow config (installed K-Lite codec pack) and there is no sound in this way.

  Is there a solution? something escapes me?

  Thanks to all in advance,

  Thanks for your time and your response.

  I got it actually work! updated drivers audio and video (not Sony ones sugested, but later of Intel and Realtek) and now I have everything works as it should.

  The only minor problem is that Vaio Care now wants me to go back to the previous version of the driver, but I'll just ignore it.

  Everyone, try this if you experience this problem.

• Cannot get computer to launch

  I have a compaq laptop with vista. It won't normally load upward, it will charge the safe mode and safe mode with network but if I select start windows normally just is there and does nothing, the only way I could get out and restart had to pull him detach the battery and turn it back on and select Safe mode with network. I managed to save all my pictures and documents on an external drive but I don't know how to re boot computer such that it came with vista pre loaded, and I'm worried if I wipe the memory I get windows from a place to recharge. I'm sure that there is a restart on hard drive partition, but I don't know how to do.

  Hello

  Instead of Safe Mode, you could choose "last known good configuration... '. "or do a Safe Mode system restore to before that the problem started.

  http://bertk.MVPs.org/html/restoresysv.html

  Here is another option for you startup repair:

  You can do a startup repair and / or a system restore using a DVD of Vista from Microsoft

  Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.

  Here is the guide to repair Options using a Vista DVD from Microsoft.

  If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

  http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

  Table of contents

  1. Overview of Windows Vista repair options
  2. How to perform an automatic repair of Windows Vista using Startup Repair
  3. Advanced Tools Overview
  4. Conclusion

  If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

  Unfortunately, you have to buy it.

  Here is a link to it:

  http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

  ____________________________________

  But if you want to reinstall back to the factory settings you have saved your data here is how to do this.

  You have two choices, if you have never rec'd a recovery disk to buy and never done yourself.

  "Performing a recovery of the system HP (Windows Vista)"

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00809678&LC=en&cc=us&DLC=en&product=3552675&rule=46565&lang=en

  You can access the Partition of Windows recovery using the recovery or by repeatedly pressing F11 at Startup Manager.

  See you soon

• Cannot get computer to recognize officejet pro 8600

  computer does not connect to officejet pro 8600 same thought printer is connected to the wireless network.  HP Home Network Diagnostic utility indicates that the printer software is not installed.  HP Print & Scan Doctor bombs & quit unexpectedly.  The computer is plugged in the wireless router to connect to wireless devices and the DSL router.  Any suggestions?

  Hello

  I have been searching forums and make my own diagnosis and lots of reading many posts. I found an article useful, but even with the update software, I keep losing the connection to the printer, and I have to restart to be able to print and scan. Even if I try to search again for the printer, it is not found on the Windows XP computer until I have it reboot. But if I reboot it, I don't need to re-scan for her. It works again for a few hours then stop working again. All other Windows 7 computers and laptops on the network are very good. They all have the same scan virus etc.

  Here is the article useful: http://support.hp.com/us-en/document/c03149924

  But at the same time, I have the updated version of the software something v25 and the problem still is occcuring, but I can see how this can help some people. I think that the upgrade to Windows 7 is the solution for now. I'm running out of options. I tried stop and start the spooler to print manually, which used to fix a bunch of problems in the past in WinXP. Delete and add the printer again. Next step before win7 might be to uninstall the software and see if there is anything more recent than the software v25.

  Good luck to all!

• Cannot get computer to exit the mode "sleep"...

  Earlier this morning, my computer for 15 hours to exit the mode hibernation; some very useful posters expressed the view that it could be a battery problem, but thatprobably was not the case.

  Now, he's not out of "sleep mode".

  Should I disable one or both of these modes, or do a "hard" reset (I've heard the term, but I don't know how it's done), or try something else.

  This is a laptop HP 3 year with Vista & IE 8.

  Thank you!

  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.HTML?filter [11] = power % 20Management

  Read the info on sleep disorders in the tutorial above.

  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  Also read this tutorial; as well as the 'related links' at the bottom of the links above.

  See you soon.

  Mick Murphy - Microsoft partner

• Caught a virus. Want to just erase the HD and reinstall. Cannot get Windows original XP discs do. Help?

  Click son on some site that I can download a Trojan horse.  Disabled Malwarebytes and AVG update did not find. Saved that I need and now want to erase the hd and reinstall.  Cannot get computer to read what whatsoever. I myself once in safe mode, but now it tells me that it cannot find a hard disk.  I can refer to boot from the CD drive, but it gives me a blue screen error "cannot find a hard disk. Any help?

  Your computer most likely has SATA drive and the Windows XP installation disc does not include the SATA controller drivers so Setup can not 'see' the hard drive.  You have several options:

  1. to detect the drive, you must use the F6 method to provide the drivers of controller for the installation program, note that when you use the F6 method, the pilots MUST be provided on a diskette, the installation program will not accept the drivers from other media sources.

  Adding third-party or updated during the installation of Windows driver
  Mass storage drivers and the Setup process

  2. you can integrate the drivers into your installation CD:

  http://search.Yahoo.com/search;_ylt=A0oG7nPuhZFO4ikAUghXNyoA?p=slipstream+F6+SATA+drivers&FR2=SFP&FR=YFP-t-501&type_param=

  3. you can go into the BIOS and change the SATA controller in IDE mode and the Windows Installer will be able to detect the drive.  Most of the BIOS have this option is available, if you don't you will need to use option 1 or 2 above.

  John

• How to get Windows 7 Sound Recorder to record audio from the computer?

  I team with my boss and another customer meetings and we want their registered and we use phone calls from Gmail which means that audio is delivered directly through the internet, and Sound Recorder, I found out but I can't record audio only regular computer unless I Plug one wire in the headphone jack that goes to the mic socket who made the impossible phone call since taking mic is already taken.

  I saw in Windows help can I change the source to be recorded, but it lists only microphones (one built into my laptop is default).

  Is there a way to change the entry from the audio recording of the computer?

  My alternative is to find a cable between the MIC and the sound output in order to hear, speak and record at the same time, which I have never seen elsewhere.

  I also do this all the time.  All what I have to do to set up the computer for that is: -.

  Control Panel, [view by - small icons, if necessary], Sound, recording tab, set Rec. reading * as default device

  [* the name of your topic in the recording tab may be different - you just choose the entry that is not a micro device]

  Sound recorder will then record sounds coming through the computer.

  - - - - - - - - - - - - - - - - - - - - - - -

  If I ever want to record from the microphone, I need to reverse the above setting by:

  Control Panel, [view by - small icons, if necessary], Sound, recording tab, set the internal mic as default device

  Sound recorder will then record sounds coming through the microphone.

• I Accedently disable my high definition Audio Device and I cannot get it back

  I Accedently disable my high definition Audio Device and I cannot get it back. IDK what to do but I do not see how to reactivate it.

  Hi MarkRampone,

  Thank you for posting in the Microsoft Community, where you can find all the answers related to Windows. It seems that you have disabled the Audio device high definition and you must activate it.

  In addition to answering these questions that would help us provide a better solution:

  1. How did did you disable the Audio device high definition?

  2. What is the brand and model of the computer you're using?

  Try the steps mentioned in this link and check:

  No sound in Windows
  http://Windows.Microsoft.com/en-in/Windows/no-sound-help#no-sound=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1
   

  Hope this information helps. If you have any other questions feel free to respond and we would be happy to help.

• I'm trying to get audio only from a video. I went to record audio only: (as shown) and there is no ' audio only ' click. do I have to upgrade the machine to live music, and if so, how?

  I'm trying to get audio only from a video. I went to record audio only: (as shown) and there is no ' audio only ' click. do I have to upgrade the machine to live music, and if so, how?

  If you are looking to get audio only from a YouTube video, all you need to do is read your video and while it's going to copy the link. Then on another tab, open listentoyoutube.com. Just follow the easy directions and paste the link.

  Hope that helps. I found out a month ago and I have 4 CD made from these audio files. There is a lot of fun to find obscure stuff and making CD of songs.

  Jon

• Could not get computer working properly due to malware. Went to safe mode and cannot fix. Can we please hep

  Annot get computer works correct due to malware. Went to safe mode and cannot fix. Can we please hep

  Hello

  1. what exactly is the problem?
  2. Why do you think malware are causing this problem?
  3. What have you tried in safe mode?

  Your question does contain all the required information necessary for us to help you. Please re - write your question, this time make sure you have all the information necessary and we will try to help.
  How to ask a question
  http://support.Microsoft.com/kb/555375

• I get an error code whenever I start my computer. I have loaded several packs of registry repair software but cannot get rid of the message. The message bed error loading c:\windows\system32\pofusido.dll the specified module is not found

  I get an error code whenever I start my computer. I have loaded several packs of registry repair software but cannot get rid of the message. The message bed error loading c:\windows\system32\pofusido.dll the specified module is not found

  Hello

  I googled this file pofusido.dll and it could be caused by a virus.

  I would suggest that you disable the restore mode as viruses use it to reinstall set apart them.

  Download and install the free http://www.malwarebytes.org/

  Restart the computer and keep pressing F8 to get into safe mode with network connection.

  Once you have updated Malwarebytes run and see if it can remove the virus.

  So delete all cookies in your internet Explorer.

  Please keep in mind that my answer is based on the information in your message. More the better I can answer, Slan go foill, Paul

• I replaced a HP with an Epson Stylus all-in-one printer and cannot get the printer to print more than one page when printing from the computer.

  Original title: new printer

  I replaced a HP with an Epson Stylus all-in-one printer and cannot get the printer to print more than one page when printing from the computer.  The printer works fine when printing from a laptop or ipad!

  Start by going here--> http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?UseCookie=yes&oid=232591&prodoid=63099059&infoType=Downloads&platform=nodetect

  If the web page has not correctly detected your operating system, select it by using the drop-down list.  Rather than using the "Combo package" recommended but huge, expand the "Drivers" section and download driver printer v2.32 to a location that you will remember later.

  • Click on the ORB start and go into devices and printers.
  • Select (click) the icon of your Epson printer.
  • Once you have selected the printer, a button labeled "Print server properties" will appear in the toolbar.  Click on this button.
  • Click the "Drivers" tab on the print server properties dialog box.
  • Select the Epson printer in the list of installed printer drivers, and then click 'remove '.
  • In the context menu, select "Remove driver and driver package" and click OK
  • Click Yes, and then delete
  • Once the removal process is complete, restart the computer (probably not really necessary, but can't hurt)
  • Install the driver and the software using the file that you downloaded earlier

  At this point, your printer should work fine.  However, if you want the ability to print by emailing a file to your printer, you may need to install both 'Remote Printer Driver v1.65' in the category 'Pilot' and "v1.30 utility Configuration of printer Epson Connect" in the "Utilities" category

• This computer cannot get internet service

  Original title: nomsnobtained

  This computer cannot get Internet service more today why?

  Hi Nick,

  Thanks for joining us on the Microsoft Community.

  According to the description of the problem, it seems that you have difficulty to connect to the internet.

  To help you to propose measures to solve the problem, I would appreciate if you could answer the following questions:

  1. you receive an error message or error code?

  2. what web browser do you use?

  3. what type of internet connection?

  4 did you do changes on the computer before the show?

  In the meantime, you can consult the following articles for more information on internet connection problems:

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

   

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Hope this information helps. Reply with more information about the issue so that we can help you better.

• How to record audio on my computer

  If I want to take a dictaphone which was held hand and record audio on my computer, how can I do this windows 7 is what I

  Hi monkey763,

  If you can connect the recorder to the computer, for example by using a USB connection, you can set the recorder of the Word as a recording device using the following steps:

  1. Right click on the speaker icon in the notification bar (lower right part of the screen near system clock)
  2. Select the recording devices
  3. Select the dictaphone
  4. Select set default

  Let us know if that helps.

• Record audio from the computer in a rail hearing

  Hello

  I was wondering if anyone could tell me how to record audio from my computer in a rail at the hearing?

  Under Hardware Audio in the preferences, I joined entry as a default entry, but when I click on save, it does not record anything.

  Would appreciate any help.

  Thanks in advance.

  I recommend using SoundFlower.  He disapproved of and such mentioned - is more developed.

  To record the audio from your Mac, look in:

  Its Siphon by static Z Software

  Closure of Rogue Amoeba

  -paul.

  @produceNewMedia