Cannot get innto my computer takes me to register windows

Similar Questions

• Cannot get on my computer after you turn off FileVault

  I can't get on my computer after you turn off FileVault. After reboot, he asked my name and my password. It didn't work and now I'm stuck at the connection. What should I do? The computer is new and I had nothing recorded on it.

  Reboot into recovery (command-R) Mode. Then use disk utility to ERASE the drive. Select the top reader of the page entry and select Delete. This will erase, reformat, and create a single partition. Close disk utility, then select reinstall OS X OS X Utilities menu.

• cannot get sound on computer laptop gateway

  I can't sound on my laptop its made by gateway that I have tried all the settings and nothing works

  Hello

  You get no sound in your laptop.

  1. What is the brand and model of your computer?

  2 have had any changes made to the computer before the show?

  Please follow the steps from the link and check that it works very well.

  No sound in Windows

  http://Windows.Microsoft.com/en-in/Windows/no-sound-help#no-sound=Windows-XP&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

• Cannot get TV to computer (not supported mode). What can I do?

  COMPUTER CRASHED HAD TO REINSTALL THE OPERATING SYSTEM NOW MY TV DOES NOT WORK WITH YOUR COMPUTER AND TESTED SOUND DEVICE IS WORKING PROPERLY, TV SAYS MODE NOT SUPPORTED PLZ HELP

  original title: CANT GET TV TO WORK WITH COMPUTER (MODE NOT supported) which CAN DO? USE OF IT TO WORK

  Update your graphics card driver. Visit the manufacturer's Web site to download and install the latest version of the graphics driver graphics card.

• I changed my password on the computer and can not find the book that I wrote on and now I cannot get into my computer account. How can I rectify this?

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Start the computer in safe mode and log on to the built-in account named administrator .  You will need to know the password, if any, for this account.  Once, go to Panel > user accounts and change the password for your regular account.

  Then, restart the computer and you connect to your regular account with the new password.  If the computer has a floppy drive, you can make a password reset disk

  Boulder computer Maven
  Most Microsoft Valuable Professional

• How to get to my computer when I forget my Windows login password? __

  We have windows 7 starter edition. My daughter has changed the password for the connection. Then she forgot what she changed. Can someone help me?

  You can change your password to something that you remember another administrative user account. If you had only an administrative user account and you have forgotten the password, all is not lost. You can then follow the general recommendations for configuring user accounts in Windows 7, I will give you at the end of this post.

  All this requires a certain level of computer skills. You know better and that take the machine to a competent local computer tech (not a type of BigComputerStore/GeekSquad place) is the best solution for you.

  If you have a Windows 7 DVD installation (not a recovery DVDs), you can start the system with it. Select the default language, then select "repair your computer". Then select "Command Prompt". At the command prompt, type:

  NET user administrator / Active: Yes [press Enter]
  NET user [insert here the name of your user account] [insert the new password of user as 1234 here] [press Enter]

  [Note: do not enter the brackets!]

  Remove the installation DVD and restart the computer. Now, you will be able to connect to your user account by using the password that you set; for example, 1234.

  If you do not have a Windows 7 installation DVD (only have a recovery disk), the computer mftr. may have given you the option to repair the system Windows 7 (not a system recovery!) in the menu diagnosis. This menu of diagnosis is the same one where you can choose Safe Mode. Get to this menu by repeatedly pressing the F8 key as the computer starts. If you do not have this option, you can make a bootable DVD of Windows 7 repair of the file on this link:

  http://NeoSmart.net/blog/2009/Windows-7-system-repair-discs/

  Note: All the Neosmart recovery disk downloads are torrent files. There is a good explanation of the torrent on the site Web of Neosmart files. You will need a torrent as muTorrent client to get the files. Torrent client will download the .iso file with which to create the bootable DVD. If you create the bootable DVD in an older operating system (XP, Vista), you will need to use third-party burning software such as Nero, Roxio or the free ImgBurn (http://www.imgburn.com ) to burn the image .iso image file, not in the form of data. Windows 7 can burn the .isos natively.

  Once you have fixed things, log on to the additional administrative account you will be made by the suggestions below and disable the administrator account integrated yet for security reasons:

  Start Orb > Search box > type: cmd
  When cmd appears in the above results, right-click and choose "Run as Administrator" [OK]. Now, you will get the command prompt. At the command prompt, type:

  NET user administrator / active: No. [Enter]

  Exit the command prompt.

  General recommendations for creating users in Windows 7:

  You absolutely don't want to have only one user account. Like XP, Vista and all the other modern operating systems, Windows 7 is a multi-user system with integrated system of accounts as default Administrator and comments. These accounts should be left alone because they are part of the structure of the operating system.

  In particular, you do not want account only one user with administrator privileges in Windows 7 because the administrator account integrated (normally only used in emergencies) is disabled by default. If you use as an administrator for your daily work, and this account is corrupt, things will be difficult.  It is not impossible to activate the built-in administrator to rescue things, but there may be more that you want to do. Better not to put you in a bad situation at first.

  The user account that is for your daily work must be a Standard user, with the extra administrative user (call it something like 'CompAdmin' or 'Tech' or similar) only it for elevation purposes. As a user Standard is recommended for security reasons and will help protect your computer against infections. After you have created "CompAdmin", connect to it and change your normal user account Standard. Then log on to your regular account.

  If you want to go directly to the desktop and ignore the Welcome screen with the icons of the user accounts, you can do this:

  Start Orb > Search box > type: netplwiz [Enter]
  Click continue (or provide an administrator password) when you are prompted by UAC

  Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null).
  MS - MVP - Elephant Boy computers - don't panic!

• Cannot get Horizon view 5.3.1 to use Windows CA certificate issued

  Hello

  I have a Horizon view 5.3 vConnection Server installed and wanted to replace the self-signed certificate with one of my MS Enterprise CA (Win 2008 R2 Ent).

  I followed the instructions of these two pages, I think exactly:

  Terence Luk: certification for VMware view Horizon 5.2 with Microsoft Enterprise certification authority servers http://terenceluk.blogspot.co.UK/2013/04/issuing-certificates-for-VMware-horizon.html

  http://www.derekseaman.com/2012/09/create-VMware-Windows-CA-certificate.html

  I took the steps:

  On my Win 2008 R2 Ent (standalone) CA, I reproduced the compatible under Windows 2003 CA Web server certificate template.

  Changed the use of the key to activate non-repudiation and "allow encryption of user data.

  Authentication of the Client added to enforcement strategies

  Confirmed that the name of the topic has been set to "provide in the request.

  Confirmed the vConnection Server computer account has the required permissions (btw, I even gave total control and the problem persists - is not a permissions problem)

  Added the new model to the list available to be issued (CA MMC > Certificate Templates > New > model certificate for the question)

  From the vConnection server, I open the MMC snap-in certificates, computer store

  I asked a new personal certificate from my CA and selected the newly created model

  I have completed only the FQDN internal of my server vConnection CN: [CN = "vmwv-vncenctn - 01.mydomain.local"]

  I updated the friendly name and description "vdm".

  I changed the friendly name of the empty self-signed certificate

  I restarted Windows vConnection server just to make sure that all the necessary services were restarted

  I cannot now connect to during a service of vConnection's web management interface - Page cannot be found.  If I have the friendly name of vdm revert to the original self signed certificate and restart services, access is restored.

  Please can someone help me with this.  I spent two days pulling my hair and getting nowhere.

  Thank you

  C

  Follow rather official VMware documentation.

  http://pubs.VMware.com/view-52/topic/com.VMware.ICbase/PDF/horizon-view-52-obtaining-certificates.PDF

  In particular, make sure that your use of improved key contains the correct value.

  Mark

• Cannot get my dell A920 printer to print using windows 7, it will scan but not print. It is said it can not print, but may not know why when troubleshooting

  I can't get my dell A920 to print.  It scans but does not print.  The reasons why CN can't find troubleshooting.  Help

  dosducexx,

  First run, delete print jobs to eliminate any print job stuck in the queue.

  Unplug the printer.

  Download and run the patch (cleaning printer utility) until it prompts you to restart your computer.

  Restart your computer. Make sure that the printer is deleted. Deleting Manual printer driver

  Download the 32-bit drivers for Vista for Windows 7 32-bit or 64-bit drivers for Windows 7 64 bit Vista. Install the Vista drivers in Vista compatibility mode, you will get a message, the printer is not connected. Connect the printer at the moment (power on).

  You will find links to the patch/drivers to...

  Owners of printer inkjet all-in-one Dell A920 thread (W7)

  Don't forget the programs anti-virus and firewall will block communications.

  Rick

• Computer takes forever to start (windows 8)

  Until recently my phone has taken an hour or more at the start (and I'm pretty sure it takes a lot of time to stop but that doesn't bother me). When I hit the power button / I hear the fan or something when I put my ear close by, but all lights only stays on for a few seconds and then I don't hear it anymore. My computer will simply if sit like a black screen... as the monitor is asleep or something, suspecting he was asleep I tried to hit the SPACEBAR several times to wake up but no it doesn't. . After what seems like years, I finally see the lenovo loading screen and it starts up fast from there. I tried to run ccleaner, tried to make a record of cleaning / optimization, I scanned for virus/malware, I fiddled around in the boot parameters by running 'msconfig', disabled some startup programs and nothing I tried worked even. I go GeekSquad.com and they tried to help me remotely and they said that "it seemed that I just needed a good tuneup", so if any of you know what they do to optimizations that could be useful and I can try to do it myself.

  When I go on the start with Ctrl Alt Del menu it says my last time of bios is about 2.8 seconds

  I guess I can give you the specs of my computer just to save time incase someone asks:

  Lenovo IdeaPad N580

  Windows 8

  Processor: Intel Pentium CPU 2.20 GHz 2.20 GHz B960
  Installed memory (RAM): 4.00 GB (3.87 GB usable)
  System type: 64-bit, x 64 processor operating system
  Pen and touch: no pen or no key is available to view

  It would be great if someone could try and help me, thanks!

  Hello

  Check with support from Lenovo, their online documentation and drivers, diagnostics and ask
  in their forums on known problems.

  Support from Lenovo and downloads
  http://www-307.IBM.com/PC/support/site.WSS/homeLenovo.do

  Lenovo forums
  http://forums.Lenovo.com/

  =================================================

  These should help:

  Crashes Windows or freezes
  http://support.Microsoft.com/kb/2681286

  Ways to improve the performance of your PC
  http://Windows.Microsoft.com/en-us/Windows-8/improve-PC-performance

  Maintenance & performance
  http://Windows.Microsoft.com/en-us/Windows/performance-maintenance-help#performance-maintenance-help=Windows-8&V2H=win7tab1&V3H=winvistatab1

  How to speed up your PC
  http://support.Microsoft.com/kb/2746761/en-us

  =======================================================

  You use a 3rd party antivirus/antispyware/security program? If so many people
  can cause slow start from the bottom.

  Check with the support of the system Maker (manufacturer of motherboard for customized systems), their
  online resources and the drivers and ask questions in the forums about known problems.
  Updating the BIOS , drivers of low level chipset and embedded and separate major
  device drivers (anyone who can have an impact on the speed of startup and performance).

  Note the use of Win Key + X and Win Key + W (to go on the Control Panel, Run and parameters
  According to needs). Win + D key calls the office and using Win Key active / disable the office and
  Splash screen.

  Check startup programs.

  Right-click in the left lower corner - Manager of tasks
  Or Windows key + X - Manager of tasks
  Or right click on the taskbar - task manager

  Check the Startup tab.

  More troubleshooting:

  How to perform a clean boot for a problem in Windows Vista, Windows 7,
  or Windows 8
  http://support.Microsoft.com/kb/929135

  Other programs to help:

  Autoruns - free - see what programs are configured to start automatically
  When your system boots and you connect. Autoruns also shows you the complete list
  locations of registry and files where applications can configure start automatic settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Explorer - free - find out what files, registry keys, and other objects
  processes have open, which DLLs they have loaded and more. This unique
  powerful utility will show you even owned by each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  =======================================================

  If necessary:

  Try to do a "Refresh your PC without affecting your files" (or modification of your personal data
  settings) or even a restore. Be prepared to re - install the programs, applications will remain.
  And having redundant backups of your files on the disk main hard is always a
  good idea.

  Windows 8 includes special discount methods (keep files and settings) or a reset
  (new installation remove all).

  How to restore, refresh or reset your PC
  http://Windows.Microsoft.com/en-us/Windows-8/restore-refresh-reset-PC

  How to create a system image to refresh your PC in Windows 8
  http://support.Microsoft.com/kb/2748351

  How to update Windows 8
  http://www.eightforums.com/tutorials/2293-refresh-Windows-8-a.html

  How to reset Windows 8
  http://www.eightforums.com/tutorials/2302-reset-Windows-8-a.html

  If you need a repair disc:

  Create a system repair disc
  http://Windows.Microsoft.com/en-us/Windows7/create-a-system-repair-disc

  How to create a "system repair disc" (CD/DVD) in Windows 8
  http://www.eightforums.com/tutorials/2855-system-repair-disc-create-Windows-8-a.html

  How to create a recovery USB in Windows 8
  http://www.eightforums.com/tutorials/5132-recovery-drive-create-USB-flash-drive-Windows-8-a.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Cannot get the Fn keys to work after installing Windows 7

  I have completed the installation of Windows 7, but impossible to get the Fn keys to work. I found and installed the 'flash cards' which seems to do a similar thing, but want the good Fn button as well.

  Anyone know who the drivers for it?

  Thank you
  Tim.

  Hello Tim

  How you installed flash cards?
  As far as I know, it must be part of the package of added value.
  You have installed Vista VAP on Win7?

• Cannot get rid of Symantec Anti-virus. - a windows installer window keeps popping up referring to Symantec after uninstalling symantec.

  I have problems wiping out anti-virus from Symantec. I deleted everything that I could find has nothing to do with it, so I thought, but a windows window installation keeps popping up referring to Symantec, prompts me to insert my disc (which I don't have) and then displays an error. It does this randomly. I installed something else and he said everything is ok. Is my problem in the temporary files or I'm not pushing the right buttons?

  Tried Norton Removal Tool?

  http://us.Norton.com/support/kb/web_view.jsp?wv_type=public_web&docURL=20080710133834EN&LN=en_US

  You're more likely to get the best advice if you include:

  • the exact application you are trying to uninstall, including version
  • the version of Windows you have, including the service pack
  • the full text of the error messages you see, without paraphrasing
  • what you have done so far, in addition to details "I deleted everything I could find.

• Always convert Win app - cannot get rid of the controls of the projector window full-screen Mac?

  OK, two steps back. I use mx 2004 on windows to create a projector full screen for Mac. In windows, the window controls go away and the app looks like an application full screen. However, the Mac projector shows windows controls high on my 640 x 480 video - IE red, orange and green buttons at the top left.  I looked through all the parameters of publication, and I don't see anything that could be the cause.  Can someone tell me please how to get rid of these controls windows in Mac version, so I can have a clean fullscreen application to watch without control of windows?  I would be very grateful thank you!

  Prof. S.

  Do that there's no sprites on the selected scene, and then in the property inspector, and you should see a tab labeled, "View model". Click this tab and there uncheck the 'Visible' in the title bar of paragraph Options.

  I do not work on a mac, so I can't confirm that this works for mac, but if you haven't tried yet so maybe that will do the trick.

• Cannot get my android tablet to sync with my windows computers

  I have Windows 7 and 8.1 and a Lenovo tablet. Firefox is updated in all. My Favorites synchronized between my computers, but when I try to sync my tablet, it does not give me numbers to type as indicated in the help section that he must. But it says that my tablet is synchronized. Do not understand. There is no favorite of my computers.

  Hi sdwrdt,
  Numbers to type? Are you talking about an old article on synchronization of the former by chance? There are number of synchronization during the synchronization of the new features on the old account synchronization. Synchronize your bookmarks, Firefox, history, passwords, etc.

• Cannot get printer to download drivers. Go to Windows Update, see driver, try to download, get error 80070005

  Help.  I tried several solutions, I found on the web.  No work.  I can not print!

  I had this problem with both printers, recently a Canon i9900.

  You might be better to post to the Windows 7 forums where someone may know how to add the printer etc.

  • Windows 7
    (http://social.answers.microsoft.com/Forums/en-US/category/windows7) TaurArian [MVP] 2005-2010 - Update Services

• Cannot get the Adobe PDf printer to run on windows 7-64 bit

  Has anyone solved how do the Adobe PDf printer in windows 7-64 bit. During the installation it aligns it with LPT1 printer port. other discussions/solutions, it was suggested to add new printer with port existing use: Documents\ * .pdf (Adobe PDF) selected.

  This port option does not appear in the list of existing ports well. can someone help with this problem? Thanks to a witness of anomaly. Mike was soon

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner