Cannot get ' mouseEnabled = false & quot; to work with my DisplayList

Similar Questions

• various error messages - cannot get old matrix printer that works with xp for the printer in windows 7

  I have a new pc with windows 7 - I have an old panasonic kxp 3696 PARALLEL port printer that works fine with xp - I bought a decoder directional bi to convert the port PARALLEL to the usb port and is connected to my lenovo m81 - computer came with pre installed epson fx series 1 136 driver in the Inbox (this is the driver of windows 7 recommended by panasonic for this printer)-I managed to print a test page and something of Word-, I then downloaded our accounting software and added an hp printer - in the process, I removed the usb connection and later reinstalled anbother port - since then I could not print all documents or bills - I uninstalled and reinstalled the printer - I deleted and created ports - initially the docs crammed into a queue for printing - I then changed the setting to print online and print test page new - now I send documents to print and they do not appear in the print queue - it seems to be multiple of the printer on the computer copies when I reinstall - also get a message that is not network printer (the printer is connected by usb) and another message00? 0000? etc.

  I used the printer add - local port - function and then create a new port that I called epson - someone can talk me through the process in detail.

  specifically what port should I use (local or create new)? I used the port usb - is that correct?

  If I print a test page? I would be able to print documents?

  If I get epson 1 and exemplary epson 2 - has actually deleted the printer driver?

  Please note I have contacted panasonic who can't stand the printer-I called epson that does not support the old drivers and lenovo that says it's a software problem talk to microsoft.

  We also run windows 7 64 bit in xp for the printer mode if so? How?

  Hello

  I suggest you to uninstall the printer drivers and then use the driver file that you want to install by using the procedure - below

  a. click Start, click Control Panel , and search for printers , and then double-click Printers.
  b. now, click Add Printer.
  c. Select Add a local printer and click create a new port.
  d. Select Local Port and click Next.
  e. type in "[\\computer name\printer name]"(sans les guillemets) for the Port name and click OK. ""
  f. follow the instructions to complete the installation. During the installation, when you are prompted to choose a good driver; Click the "disk".
  g. navigate to the driver file that you have on the computer, and then click OK. Now, check if the printer is correctly installed.

  I hope this helps.

• Cannot get my Satellite Pro to work with internet access wireless

  I have a Satellite Pro L20 - who has wireless network adapter. Bought a BT Voyager 2110 Wireless ADSL router. Connected to my broadband router. Used Toshiba config to find router on my laptop - it looks like I have then drag the icon of the laptop to the router but it says I can't do because the router is used by another owner?
  Should I do anyting - Inter adapter card in my laptop says activated - the router is connected - but nothing works.
  Please help but I'm pretty useless on these things so keep it clear
  Thank you

  Hello

  Is this the result even when you use the settings Windows wireless?

• If someone was able to get a kodak esp3250 to work with OSX el capitan 10.11.3

  If someone was able to get a kodak esp3250 to work with OSX el capitan 10.11.3

  Try to obtain the latest printer driver for Mac OS X and install it, if it works.

  http://support.en.kodak.com/app/answers/detail/A_ID/17378/kW/Kodak%20ESP%203250% 20driver%20download/selected/true

• How can I get my iPhone/iPad to work with Windows 10.

  How can I get my phone [/ iPad to work with Windows 10]

  Work what?

  Have you downloaded the latest version of iTunes on your computer?

  What exactly do you expect to achieve?

• I can't get any external microphone to work with my windows 7 in my computer HP

  I can't get any external microphone to work with windows 7 on my HP computer. I tried a USB and microphones jack 8 mm. what else can I try?

  Update your Windows and run this tool:

  http://support.Microsoft.com/mats/AudioRecording/

  If the problem persists, contact HP support.

• How can I get my scanjet 4400c to work with windows 7

  How can I get my scanjet 4400c to work with windows 7?

  Site HP says that it is not in the United Kingdom!

  Hello

  Sorry to say no luck, no more support from HP and Microsoft.

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/details.aspx?type=hardware&p=HP%20Scanjet%204400c%20Flatbed%20Scanner&v=HP&UID=C9870A&pf=0

  Kind regards.

• How can I get voice and data to work with the ASA 5505?

  Here's the issue I'm having.   Can I get a Cisco 7940 to work behind one site to another configured ASA 5505 and I can also get data to work behind it.  However, when I try to create a separate Vlan for voice and data, it does not work.  Our voice VLANs on our remote sites are 172.30 and data are 172.31, when I put the inside interface with 172.31 data will work and when I on it 172.30 voice will work.  I upgraded to a security more license and tried vlan3 created as voice.  I have the data to the top and work but I can't get vlan3 to work.   Any help would be greatly appreciated.  Thank you

  Here is my current config:

  hostname TESTvpn
  activate the password xxxxx

  passwd xxxxx

  username admin password xxxxx privilege 15

  name Corp_LAN 10.0.0.0
  name 192.168.64.0 Corp_Voice
  name 172.31.155.0 TESTvpn

  object-group network SunVoyager
  host of the object-Network 64.70.8.160
  host of the object-Network 64.70.8.242

  the Corp_Networks object-group network
  network-object Corp_LAN 255.0.0.0
  object-network Corp_Voice 255.255.255.0

  interface vlan2
  nameif outside
  security-level 0
  IP address dhcp setroute
  No tap

  interface vlan1
  nameif inside
  security-level 100
  IP 172.31.155.1 255.255.255.0
  No tap

  interface vlan3
  nameif Corp_Voice
  security-level 100
  IP 172.30.155.1 255.255.255.0
  No tap

  output
  interface Ethernet0/0
  switchport access vlan 2
  No tap

  interface Ethernet0/7
  switchport access vlan 3
  No tap

  output

  dhcpd allow inside
  dhcpd address 172.31.155.10 - 172.31.155.30 inside
  dhcpd dns 10.10.10.7 10.10.10.44 interface inside
  dhcpd sun.ins area inside interface
  dhcpd allow inside

  enable Corp_Voice dhcpd
  dhcpd address 172.30.155.10 - 172.30.155.30 Corp_Voice
  dhcpd dns 10.10.10.7 10.10.10.44 interface Corp_Voice
  dhcpd interface of sun.ins of the Corp_Voice domain
  enable Corp_Voice dhcpd
  dhcpd option 150 ip 192.168.64.4 192.168.64.3

  Enable logging
  exploitation forest buffer-size 10000
  monitor debug logging
  logging buffered information
  asdm of logging of information

  outside_access_in list extended access allow all unreachable icmp
  outside_access_in list extended access permit icmp any any echo response
  outside_access_in list extended access permit icmp any one time exceed
  access extensive list ip 172.31.155.0 inside_access_in allow 255.255.255.0 any
  inside_access_in list extended access allow icmp 172.31.155.0 255.255.255.0 any
  Access extensive list ip 172.30.155.0 Corp_Voice_access_in allow 255.255.255.0 any
  Corp_Voice_access_in list extended access allow icmp 172.30.155.0 255.255.255.0 any

  VPN access list extended deny ip 172.31.155.0 255.255.255.0 object-group SunVoyager
  extended VPN ip 172.31.155.0 access list allow 255.255.255.0 any

  inside_access_in access to the interface inside group
  Access-group outside_access_in in interface outside
  Access-group Corp_Voice_access_in in the Corp_Voice interface

  Global 1 interface (outside)
  NAT (inside) 0-list of access VPN
  NAT (inside) 1 172.31.155.0 255.255.255.0

  Enable http server
  http 172.31.155.0 255.255.255.0 inside
  http 172.30.155.0 255.255.255.0 Corp_Voice
  http 192.168.64.0 255.255.255.0 Corp_Voice
  http 10.0.0.0 255.0.0.0 inside
  http 65.170.136.64 255.255.255.224 outside
  SSH 10.0.0.0 255.0.0.0 inside
  SSH 172.31.155.0 255.255.255.0 inside
  SSH 65.170.136.64 255.255.255.224 outside
  SSH timeout 20

  management-access inside

  dhcpd outside auto_config

  Crypto ipsec transform-set esp-3des esp-md5-hmac VPN
  crypto map outside_map 1 is the VPN address
  peer set card crypto outside_map 1 66.170.136.65
  card crypto outside_map 1 the value transform-set VPN
  outside_map interface card crypto outside
  crypto isakmp identity address
  crypto ISAKMP allow outside
  crypto ISAKMP policy 1
  preshared authentication
  3des encryption
  md5 hash
  Group 2
  lifetime 28800

  tunnel-group 66.170.136.65 type ipsec-l2l
  IPSec-attributes tunnel-group 66.170.136.65
  pre-shared-key xxxxx

  output
  int eth 0/1
  close
  No tap
  int eth 0/2
  close
  No tap
  int eth 0/3
  close
  No tap
  int eth 0/4
  close
  No tap
  int eth 0/5
  close
  No tap
  int eth 0/6
  close
  No tap
  int eth 0/7
  close
  No tap

  Peter,

  Note that access list names are case-sensitive, so you've actually done something different from what I proposed.

  Please do:

  no nat (Corp_Voice) 0-list of access vpn

  No list of vpn access extended permitted ip TESTvpn 255.255.255.0 everything
  IP 172.30.155.0 255.255.255.0 extended vpn access do not allow any list all

  extended VPN ip 172.30.155.0 access list allow 255.255.255.0 any

  NAT (Corp_Voice) 0-list of access VPN

  In the case where you did deliberately, for example to separate the 2 acl: note that acl VPN (upper case) is also used in the encryption card, where you cannot add a second LCD.

  So if you want to separate you, you will need 3 access lists:

  list of access data-vpn ip TESTvpn 255.255.255.0 allow one

  voice-vpn ip 172.30.155.0 access list allow 255.255.255.0 any

  access-list all - vpn ip TESTvpn 255.255.255.0 allow one

  access-list all - vpn ip 172.30.155.0 allow 255.255.255.0 any

  NAT (inside) 0-list of access vpn data

  NAT (Corp_Voice) - access list 0 voice-vpn

  outside_map 1 match address all vpn crypto card

  Don't know if this was also clearly to my previous message, I recommend you to replace the "all" (in each of the ACL lines) to something more specific (i.e. a remote network, or group of objects that contain the remote networks).

  HTH

  Herbert

• After update to El Capital, cannot get numbers key pad to work on several different keyboards

  Updated to v10.11.5 and now cannot get the keys on the keyboard to work. Have tried several keybds and different brands. Any suggestions?

  Not sure if it works but try resetting the SMC.

  Reset the management system (SCM) controller on your Mac - Apple Support

• I can't get my new scanner to work with Equium A60

  I can't get my new scanner (canoscan lide 70) to work with my a60. Is it because the usb ports are all hubs?

  Hello

  > it because the USB ports are all hubs
  Sorry, but this suggestion to me confused.

  I m also owner of a scanner and it s a simplest thing to connect and install it!

  I put t see any problems using the scanner.
  All devices should be delivered with the own installation CD and I guess that your scanner also comes with additional supports.
  This CD contains the description of the installation and the necessary drivers.

• Could not get palm pilot tx to work with vista 64-bit

  I bought a Dell Studio Hybrid under Vista 64 - bit OS with 4 GB of RAM. .  However, according to the website Compatinbility Web of Microsoft Vista, Vista 64-bit is not compatible with the Palm TX, just Vista running 3 GB of RAM or less.  Anyone can tell me how to get my Palm TX for work (sync) with the Vista 64-bit operating system?

  I uninstalled the Palm, Inc., CD-ROM software and reinstalled only to get the same results: the Vista 64-bit operating system is not compatible with my handheld Palm, Inc.  Please note that even the Palm TX is compatible with all other operating systems Vista except for the 4 GB of RAM, 64-bit Vista oS Microsoft Compatibility Web site said.  Help.  I'd like to be able to sync my pocket computer with the data that I have previously placed on Microsoft Office Access 2007.  Now, when I try to sync, my office simply there and made the ocassional beeps (I guess for signals may not make the Palm TX with Vista 64-bit as function implies the Microsoft Web site.)

• He cannot get the installation disk to work.

  I insert the boot disk, the drive starts and then goes to the menu. I click the configuration option, the menu disappears and nothing happens. I've tried the drive on 2 different computers with the same results. The two laptops are Sony Viao, windows vista and are currently running wireless now. What I am doing wrong? What can I do? I called customer support without a lot of help. (reference # 090807-015012)

  Thanks for any help,

  Jim

  Finally got the disc to work. I had to use a computer with windows XP! Everything seems to work OK now.

  This site doesn't seem to work with Mozzila today, had to use the Opera browser. Thanks for the reply. Usually, I will work with these things (routers & all the rest) until I get to work or break it. - Jim

• Cannot get Windows 7 homegroups to work properly. Double-click a shared library on another machine in the residential group doesn't.

  I just bought a new laptop with Windows 7 on it, so I decided to try the new homegroup in Windows 7 feature.  I activated the homegroup on my desk and apart from the music, photos and videos.  I then joined the residential group with the new portable computer using the password provided by the office shared libraries and the same 3 homegroup.  All appeard to put up correctly, but I can't browse libraries shared each machine to other machine.  I have the Homegroup and click on the other machine and I see 3 libraries, but when I click on any one of them does nothing.  This happens on both machines.   The only way I can get the residential groups to work is to first go to the other machine and provide credentials on the other machine.  After doing this, the homegroup files begin to work.  I was under the impression that the homegroup password was all I had to have access to all shared folders with the homegroup, but the only way I can get the homegroup to work is first authenticate itself to other machine using a user name and password.

  The two machines are configured with the following:

  • Network discovery is enabled
  • File sharing and printer is enabled
  • Public folder sharing is on
  • Streaming Media is on
  • File sharing connections is configured to use 128-bit encryption
  • Password protected sharing is on
  • Homegroup connections is set up to allow Windows to manage.

  I came across this forum because I had the same problem today. Real quickly, I have two laptops, one running windows 7 Home premium 32-bit and the other runs windows 7 Professional 32-bit. I have comcast for my internet provider and their cable modem attached to my belkin wireless router. I don't know if my fix will work for someone else, but it worked for me, so this is.

  1. unplug the router cable modem wireless
  2. connect the router to one of your computers using an ethernet cord
  3. open a web browser and type in the IP address of the router in the Web page bar (as when you type hotmail.com to go check your email). Mine is a belkin so 192.168.2.1 has worked for me.
  4. the control of the router page should open, and one of the options should be to reset factory settings, do this.
  5. DO NOT CONNECT THE ROUTER TO THE CABLE MODEM
  6 configure the router in the same way that you did when you first installed the router, but just to be sure, I used another name for the network
  7. Once you have the password set up and named network you can disconnect the ethernet cable.
  8. connect to the new network without wire of each computer (just like when you connect to a wireless network) choose House (rather than work or public) for the network location.
  9. at this stage my homegroup didn't work, if it is not there for you, you may need to set up the homegroup in Control Panel.
  10. once the residential group is working the way you want to connect the router wireless to the modem cable and check to see if your internet connection is working by opening a web browser and go to any old site
  Hope this helps!
  Cameron

• Get a PhotoSmart C5580 to work with a Bluetooth connection in Windows 8

  I have a PhotoSmart C5580 for several years.  It was working fine with my old laptop running Windows 7 with USB and Bluetooth.  My new laptop has 8 64-bit Windows and the USB connection works fine, but I can't get the Bluetooth connection to work for the life of me.  The old laptop needed a USB Bluetooth adapter, but the new laptop has Bluetooth built in.

  I'm pretty tech savvy and searched through various online and tried the HP Installation Wizard help documents, but they speak mainly on USB and wireless and not on Bluetooth technology.  The Panel has USB and BT printers installed.  BT is currently marked as default printer.  The BT menu on the printer is marked to be visible, and BT options on the computer seem far too, because the computer totally see the BT printer.  The list of Windows 8 devices (two BT and otherwise) lists currently both the USB printer, which according to her, is cause of disconnected the USB cable is disconnected in fact and not the BT printer, he's talking about.

  Whenever I have remove the BT printer and add it again, the HP software/driver installs again and says it's successful (even if the driver for the USB connection and the software are already installed and work very well).

  The only problem is that the HP Solution Center indicates that the BT printer is disconnected.  It really tells me nothing more than that.  It's the same message that my old laptop would give me if I didn't have the USB Bluetooth adapter plugged in, but here the BT is built, and the computer says it is on and working very well.  So I'm a little confused at this point.  Any help anyone can offer would be greatly appreciated.  Thank you!

  I am delighted to hear that, and I'll pass that along our engineers so that they do not worry. I didn't even really think, but if you leave the USB cord is plugged it will disable the BT adapter in the machine - which could cause prints of BT to fail but not USB prints.

  Have a wonderful day!

• How to remove the part of an object grouped several using a shape (Pathfinder does not work, cannot get the knockout groups to work)? Kind of like the opposite of a clipping mask.

  I want to remove the portion of these legs inside of this graph, because a white circle solid at the Center intensifies the effect of the spiral.

  Background, the spiral is a mixture of the people flying around in a circle. The circle is then copied and turned several times. I have not developed the appearance again.

  There must be an easy way to do it, but I can't use the Pathfinders, the opacity mask, knockout groups, and make simple layers does not work. I just want to axe the legs of these easy people!

  

  

  

  This is not correct

  

  I do several models and want to find a way to make it easy and fast!

  

  Thanks to you all!

  Emmanuel,

  If I (put) correctly, you should be able to get the opacity mask to work as follows:

  Select (only) the White path and the mixture and then in the transparency palette flyout on create with unchecked Clip opacity mask and mask invert checked.

  Who must hide the inner part of the mixture corresponding to the white circle and let the front remains visible oin the background (circle and all that.)

  .