I can't get my new scanner to work with Equium A60

Similar Questions

• How can I get my TWAIN scanner to work at Yosemite

  How can I get my twain scanner to work at Yosemite?

  Please read the basics of the Mac: using a scanner - Apple Support.

• How can I get my iPhone/iPad to work with Windows 10.

  How can I get my phone [/ iPad to work with Windows 10]

  Work what?

  Have you downloaded the latest version of iTunes on your computer?

  What exactly do you expect to achieve?

• I can't get any external microphone to work with my windows 7 in my computer HP

  I can't get any external microphone to work with windows 7 on my HP computer. I tried a USB and microphones jack 8 mm. what else can I try?

  Update your Windows and run this tool:

  http://support.Microsoft.com/mats/AudioRecording/

  If the problem persists, contact HP support.

• How can I get my scanjet 4400c to work with windows 7

  How can I get my scanjet 4400c to work with windows 7?

  Site HP says that it is not in the United Kingdom!

  Hello

  Sorry to say no luck, no more support from HP and Microsoft.

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/details.aspx?type=hardware&p=HP%20Scanjet%204400c%20Flatbed%20Scanner&v=HP&UID=C9870A&pf=0

  Kind regards.

• How can I get voice and data to work with the ASA 5505?

  Here's the issue I'm having.   Can I get a Cisco 7940 to work behind one site to another configured ASA 5505 and I can also get data to work behind it.  However, when I try to create a separate Vlan for voice and data, it does not work.  Our voice VLANs on our remote sites are 172.30 and data are 172.31, when I put the inside interface with 172.31 data will work and when I on it 172.30 voice will work.  I upgraded to a security more license and tried vlan3 created as voice.  I have the data to the top and work but I can't get vlan3 to work.   Any help would be greatly appreciated.  Thank you

  Here is my current config:

  hostname TESTvpn
  activate the password xxxxx

  passwd xxxxx

  username admin password xxxxx privilege 15

  name Corp_LAN 10.0.0.0
  name 192.168.64.0 Corp_Voice
  name 172.31.155.0 TESTvpn

  object-group network SunVoyager
  host of the object-Network 64.70.8.160
  host of the object-Network 64.70.8.242

  the Corp_Networks object-group network
  network-object Corp_LAN 255.0.0.0
  object-network Corp_Voice 255.255.255.0

  interface vlan2
  nameif outside
  security-level 0
  IP address dhcp setroute
  No tap

  interface vlan1
  nameif inside
  security-level 100
  IP 172.31.155.1 255.255.255.0
  No tap

  interface vlan3
  nameif Corp_Voice
  security-level 100
  IP 172.30.155.1 255.255.255.0
  No tap

  output
  interface Ethernet0/0
  switchport access vlan 2
  No tap

  interface Ethernet0/7
  switchport access vlan 3
  No tap

  output

  dhcpd allow inside
  dhcpd address 172.31.155.10 - 172.31.155.30 inside
  dhcpd dns 10.10.10.7 10.10.10.44 interface inside
  dhcpd sun.ins area inside interface
  dhcpd allow inside

  enable Corp_Voice dhcpd
  dhcpd address 172.30.155.10 - 172.30.155.30 Corp_Voice
  dhcpd dns 10.10.10.7 10.10.10.44 interface Corp_Voice
  dhcpd interface of sun.ins of the Corp_Voice domain
  enable Corp_Voice dhcpd
  dhcpd option 150 ip 192.168.64.4 192.168.64.3

  Enable logging
  exploitation forest buffer-size 10000
  monitor debug logging
  logging buffered information
  asdm of logging of information

  outside_access_in list extended access allow all unreachable icmp
  outside_access_in list extended access permit icmp any any echo response
  outside_access_in list extended access permit icmp any one time exceed
  access extensive list ip 172.31.155.0 inside_access_in allow 255.255.255.0 any
  inside_access_in list extended access allow icmp 172.31.155.0 255.255.255.0 any
  Access extensive list ip 172.30.155.0 Corp_Voice_access_in allow 255.255.255.0 any
  Corp_Voice_access_in list extended access allow icmp 172.30.155.0 255.255.255.0 any

  VPN access list extended deny ip 172.31.155.0 255.255.255.0 object-group SunVoyager
  extended VPN ip 172.31.155.0 access list allow 255.255.255.0 any

  inside_access_in access to the interface inside group
  Access-group outside_access_in in interface outside
  Access-group Corp_Voice_access_in in the Corp_Voice interface

  Global 1 interface (outside)
  NAT (inside) 0-list of access VPN
  NAT (inside) 1 172.31.155.0 255.255.255.0

  Enable http server
  http 172.31.155.0 255.255.255.0 inside
  http 172.30.155.0 255.255.255.0 Corp_Voice
  http 192.168.64.0 255.255.255.0 Corp_Voice
  http 10.0.0.0 255.0.0.0 inside
  http 65.170.136.64 255.255.255.224 outside
  SSH 10.0.0.0 255.0.0.0 inside
  SSH 172.31.155.0 255.255.255.0 inside
  SSH 65.170.136.64 255.255.255.224 outside
  SSH timeout 20

  management-access inside

  dhcpd outside auto_config

  Crypto ipsec transform-set esp-3des esp-md5-hmac VPN
  crypto map outside_map 1 is the VPN address
  peer set card crypto outside_map 1 66.170.136.65
  card crypto outside_map 1 the value transform-set VPN
  outside_map interface card crypto outside
  crypto isakmp identity address
  crypto ISAKMP allow outside
  crypto ISAKMP policy 1
  preshared authentication
  3des encryption
  md5 hash
  Group 2
  lifetime 28800

  tunnel-group 66.170.136.65 type ipsec-l2l
  IPSec-attributes tunnel-group 66.170.136.65
  pre-shared-key xxxxx

  output
  int eth 0/1
  close
  No tap
  int eth 0/2
  close
  No tap
  int eth 0/3
  close
  No tap
  int eth 0/4
  close
  No tap
  int eth 0/5
  close
  No tap
  int eth 0/6
  close
  No tap
  int eth 0/7
  close
  No tap

  Peter,

  Note that access list names are case-sensitive, so you've actually done something different from what I proposed.

  Please do:

  no nat (Corp_Voice) 0-list of access vpn

  No list of vpn access extended permitted ip TESTvpn 255.255.255.0 everything
  IP 172.30.155.0 255.255.255.0 extended vpn access do not allow any list all

  extended VPN ip 172.30.155.0 access list allow 255.255.255.0 any

  NAT (Corp_Voice) 0-list of access VPN

  In the case where you did deliberately, for example to separate the 2 acl: note that acl VPN (upper case) is also used in the encryption card, where you cannot add a second LCD.

  So if you want to separate you, you will need 3 access lists:

  list of access data-vpn ip TESTvpn 255.255.255.0 allow one

  voice-vpn ip 172.30.155.0 access list allow 255.255.255.0 any

  access-list all - vpn ip TESTvpn 255.255.255.0 allow one

  access-list all - vpn ip 172.30.155.0 allow 255.255.255.0 any

  NAT (inside) 0-list of access vpn data

  NAT (Corp_Voice) - access list 0 voice-vpn

  outside_map 1 match address all vpn crypto card

  Don't know if this was also clearly to my previous message, I recommend you to replace the "all" (in each of the ACL lines) to something more specific (i.e. a remote network, or group of objects that contain the remote networks).

  HTH

  Herbert

• How can I get a new vista drive came with my laptop?

  Hello I have a problem. My computer has been infected by spyware 2 weeks ago and I decided to reformat my computer from windows Vista to Windows 7 now, I realized that I need to get windows 7 on my computer and want vista back but the disk I had received with this laptop is broken. I have a product key for Vista and I wonder where and how do I get a new drive, because I will not buy a new system, when I have a key product for vista, but can not use it?

  Please please help me

  Contact the manufacturer and they should be able to provide a set of recovery disc (for a small fee) which allows to re - install Vista and your computer to the original factory conditions.  If you are past since the initial purchase, to mention this and they may be able to provide records with the appropriate operating system (although I'm not sure that they can or will do it and if you have a product key upgrade, rather than a full installation product key, you will not be able to activate with this key (unless made one update-so be sure what you want to do is possible before you spend the money).

  If you know someone with a real Installation of Vista on the same size disc of the bit, then you can borrow it and that allows to install Vista and use your product key to activate it assuming that your product key is designed for a complete installation, not an upgrade (and select the version appropriate to install).  You can then copy this disc in case you need it again.  If your product key is an upgrade version, then you must first re - install the original operating system, enable it to using the product key, and then improve it with the disk and use your Vista key to activate the upgrade.

  There is no place for a drive or a free download of Vista.  Above are your options.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How can I get my Firefox persona to work with the new version of Firefox?

  It worked fine, then my computer automatically updated Firefox and my persona background disappeared. It is listed as active on the backgrounds of modules in the modules Manager. I Foxkeh tail stir. I went and reinstalled but it still does not come. I went to the personas firefox page and tried to install a different character. NONE of them work now. How can I get my background persona back?

  Make sure that you are not Firefox running in (permanent) private browsing mode.

  • https://support.Mozilla.org/KB/private+browsing
  • Tools > Options > privacy > Firefox will be: "use the custom settings for history".
  • Uncheck the box: [] "always use the navigation mode private.

  When you're in private browsing mode then the character is disabled and you get the default theme and a purple icon of PB in the menu button on the side of the right end of the menu bar (bar of tabs on Linux) or Firefox and "(navigation privée)" added to the title bar. "

• HP Deskjet 3000: I can't get my Deckjet 3000 to work with my new 61XL ink cartridge

  I always bought HP 61 ink cartridges for my printer HP deskjet 3000 and have never had a problem, I recently bought the XL 61 because cartridge that I was printing a lot of things, but every time I put the new cartridge in I get an error message and I don't understand why.

  Hi @Hpierce,

  XL cartridges are certainly more profitable and should work. I understand that you see an error message when you try to use the 61XL, I can help you.

  It seems to me that the issue could be just this cartridge. Please use the following to fix the problem and let me know the result of your efforts: HP Deskjet 1000 (J110) and the 3000 series printers (J310) - a "ink cartridge problem,'"Incompatible print cartridge", or"Ink cartridge failed"Message appears on the computer."

  Please do not forget to keep me abreast of the results, so that I can follow up with you. Thanks, I look forward to hear from you.

• How can I get Photoshop 2.0 to work with windows 8?

  Installed windows 8 on old laptop and cannot get adobe Photoshop 2.0 to work.  What should I do to use Photoshop in windows 8?

  Hi bg1212,

  Photoshop 2.0 is incompatible and not supported on Windows 8.

  Please buy the new Photoshop CS6.

• How can I get a. READING to work with firefox?

  I use Firefox at work because I like everything just better. Before we upgraded our computers to windows 7 Enterprise with service pack 1 I could use Swiftview to view our payment process, he uses one. Extension READ, but now I have to save everything before I can open it and watch. Is there a way to fix this?

  Hello pbeverly, check if in adding download actions , work if you set Notepad or other text Word or Wordpad Editor.

  Thank you

• How can I get windows live mail to work with windows 8.1?

  I keep having to connect and I can't send email.

  Hi danh2os,

  Welcome to the Forums of HP Support!

  I understand that after installing Windows 8.1, you can no longer send emails through your Live mail. I'll try my best to help you with this. To guide you with this, could you please tell me what is the complete model or the product number of your computer.  Here is a guide to How can I find my model number or product number?.

  In the meantime, here's a document for setting up email for Windows 8.1, which should help you to solve this problem.

  Please let me know and I'll be happy to help you with this.

  Thank you and have a great day!

• How can I get a TWAIN version that works with Windows 7?

  My scanner is an EPSON Perfection 1660 Photo.

  Your post has nothing to do with Windows Update. Contact Epson Support. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I can't get to layer masks to work with PScc but works fine with CS6

  When I create a layer mask, it appears correctly but does not at all.  I have the correct layer selected and I paint in black (and nothing happens blank either) and there is no problem when you do exactly the same thing with CS6, so I thought it might be a difference in my settings but I do not see everything.  My masks are NOT disabled in the properties.  Nothing appears on the image or the mask.  I can however, use the Eraser tool as usual.  Any ideas?

  Thank you!

  Is your brush on the normal mixture and not clarify or screen?

• How can I get a Dell J740 to work with Windows Vista Home Premium?

  Someone gave me a Dell J740 printer but it won't work with my Windows Vista. As much reading as I did, I do not believe it is compatible. I wish they would do the printers to work with any laptop, computers. It would be too easy.

  You seem to have stumbled in the Windows 7 section of this site instead of the part of Vista. Never mind. The answer is the same, unfortunately.

  It doesn't seem to be a Windows driver for this printer for Vista or Windows 7.

  Tom