Cannot get my microphone to work

Similar Questions

• Webcam Logitech HD C929 cannot get the microphone to work.

  What does take to get my Logitech C920 HD microphone work?

  Hello Rupitup,

  You have installed the drivers for your device? This could be the reason why you are having this problem.

  You can check if you already have drivers by following the steps below:

  • Search for the Device Manager on the on the search bar of your PC.
  • Click imaging devices or Devices of Interface , then check your device driver.

  If there is already a driver installed, you can update. If there is no driver installed yet, try to download it to your support site for the device.

  You can also get in touch with them to help you.

  Thank you.

• Libretto U100 - cannot get the microphone to work

  Hello

  I have a problem with the microphone on laptop and also when using my headset Philips SHM3100 Multimedia bought recently. I tried to use the Windows Sound Recorder software, but my voice is not recognized at all.

  I have a headset Bluetooth Configuration of whose sound and the microphone works perfectly. Someone had the same problem and found a solution?

  Thank you much in advance.
  Kind regards.

  Post edited by: julia1

  Hello

  What a problem? Do you think that it is really a problem or perhaps only a configuration setting bad microphone?
  I think that he just misconfigured s mic settings!

  If you use the external microphone, you should check the settings in the-> sound & audio devices Control Panel.
  In the Volume press tab on the Advanced button and check if the Microphone control is not mute.
  Use the Advanced button and the brand, select options called Mic2 and mic amp.

  Good bye

• I just installed my new lifeCam VX 6000, the video is perfect, but cannot get the microphone to work. people can see me but can't hear me in Skype. Help, please!

  I just started using the LIFECAM VX 6000 and it's great for video, but I can't micro e to work with my video calls in Skype.

  I did the thing of parameters of hole, etc. and no luck so far.

  Any suggestions?

  Hi LauraYQ,

  Method 1:

  I would say that microphone set as default, you follow the instructions below:

  1. Click Start and click on Control Panel.

  2. click on sound, then a new window will open.

  3. in the new windows, click on the 'Registration' tab and right click in the window and click Show disabled devices.

  4. now check if the Microphone is listed there and right-click on it and choose activate.

  5. Select the Microphone, and then click "Set as default".

  Method 2:

  If the previous step fails I suggest also you follow the steps in the link below:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-Troubleshooter

  I hope this helps.

• Satellite C660 - 18 c - can't get the microphone to work

  So, I couldn't get the microphone to work so I bought a new one. I also can not get this to work. I tried everyway I can think of and he will simply record is not all sounds and yes the microphone is on and the volume is full.

  Can someone please help me solve this? Its driving me crazy!

  Hi belthazora,

  Just to make sure that we are talking about an external microphone that you have connected to the microphone jack and not internal? I ask this question because the laptop doesn't have the internal mic.

  Anyway, if you use an external microphone ensure that it s listed in sound devices under the recording tab. You see it there?

  I also recommend an update of audio driver if it doesn t work. You can download all the updates on the official page of Toshiba:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

• How can I get a microphone to work on my computer, I have windows 7

  How can I get a microphone to work on my computer, I have windows 7

  Review:

  Connect a microphone, music player ... - windows.microsoft.com

• try reinstalling - cannot get Windows XP drivers working but material out Linux LiveCD work

  After having picked up some malware on microtour DX7300 of my wife, I decided to reformat the disk and reinstall.  For years and do not have a copy of the diskette of HP recovery that was created when we arrived first of all the computer.

  I have a copy of Windows XP Pro, installed in such a way that very well.  Device Manager is reported the driver problems with a large part of the devices as ethernet controller, audio, video etc.  I guess I can install most of the people afterwards, except the network/ethernet because I need, obviously, to connect to the internet.  Would have hoped that these devices are plug n play, but apparently not.

  I used a Ubuntu LiveCD to connect to internet.  So I know the network interface hardware works, and even audio and video resolution were out of the LiveCD.

  Found the drivers on this site:

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=3251397&...

  Those downloaded across the network.  In reading the DX7300, it is clear to me if the network card is the Broadcomm one or Intel.  Rebooted WinXP, I tried installing the Intel driver, got an error message no Intel device not found.  So I guess that's the Broadcomm one.  This driver, installation actually installed.  However, even after a reboot the network device does not work and presents itself as an error in the Device Manager.

  Thought I'd try to manually install the drivers by pointing "drivers" unpacked in the directory of installation above.  Windows indicated that the correct drivers were not found there.

  I'm at one end.  The material seems to work under linux, but cannot get the win to install the drivers.  Advice or help appreciated.

  Hello:

  This is exactly what I need.

  First install the Chipset driver and reboot:

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=12454&prodSeriesId=3251394&prodNameId=3251397&swEnvOID=1093&swLang=13&mode=2&taskId=135&swItem=ir-57823-1

  Then, install the graphics driver;

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=12454&prodSeriesId=3251394&prodNameId=3251397&swEnvOID=1093&swLang=13&mode=2&taskId=135&swItem=vc-68806-1

  Then, install the MS UAA HD Audio Bus driver:

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=12454&prodSeriesId=3251394&swItem=PSG_I23303-108286&prodNameId=3251397&swEnvOID=1093&swLang=13&taskId=135&mode=3

  Then, install the HECI driver:

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=12454&prodSeriesId=3251394&prodNameId=3251397&swEnvOID=1093&swLang=13&mode=2&taskId=135&swItem=ir-46941-1

  Now for your pesky NIC... It's a NIC from Intel.

  Let's try this 'one size fits all' network driver Intel: you want the first listed download (XP 32 bit).

  http://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=18717&ProdId=1700&lang=eng&OSVersion=Windows%20XP%20%20Professional * & DownloadType = drivers

  Paul

• Satellite Pro P300-19 q - cannot get the Wlan to work

  Hello

  Ive just bought the PRO P300-19 q and as many other people cannot get wifi to register even less to connect to any network. I will say that I am under XP Pro. I've updated all the drivers and everything is enabled.

  If anyone can help with this problem it would be greatly appreciated. It seems absurd that Toshiba or Intel have not resolved that, as the problem is ongoing since 2005 - announcement earlier I found.

  Thanks for your help, Zato.

  Hello!

  You have successfully updated the WLAN driver on the Toshiba site?
  http://EU.computers.Toshiba-Europe.com

  Try to update the BIOS of your laptop. You will find on the Toshiba site.

  You use the same standard WiFi on your laptop as on the router? Check in the properties.

  Good bye

• Cannot get the sound to work on my hp mini computer

  I seems that I can't get the sound to work on my laptop. I ran several updates and also tried troubleshooting. can someone help me!

  Re-post with the following info: laptop, name and model number.

  Or if you, re - install your audio drivers (on the site of manufacturers of laptop or any CD you provided with the unit).

  See you soon,.

  Jerry

• Cannot get my speakers to work. they used to work when I am connected to my my helmet

  can't seem to get my speakers to work more on my computer. I can get sound through the computer's speakers, but not to insert. they use to work but I had my system cleaned and now they no longer work

  Hi BRENDAVENOR,

  ·         What happens when you try to play the external speaker?

  ·         You receive an error message?

  I suggest you try the steps mentioned below and check if it helps.

  Step 1: Follow the provided article.

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

  Step 2: Update device drivers.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• Cannot get the remote to work

  Hi guys,.

  I've just updated my Visa dv5 Pavilion to Windows 7, I can't now get the remote to work. I think it's a driver problem, Device Manager, says the driver works correctly, but I don't know if the driver is compatible with W7. I don't know where or how to get the appropriate driver.

  Any ideas?

  MORGs says:

  It is a Pavilion dv5 1110em running Windows 7 32 bit.

  Thank you!

  Here is Windows 7 32 - bit ENE CIR receiver driver you need for your remote control.

  Best regards

  ERICO

• Qosmio F750 - cannot get certain functions to work after 8 Win uprgade

  I have a Qosmio F750-125, PQF75E.

  Since I upgraded to Win 8, using Toshiba Upgrade Assistant I might add, I had a few problems.
  Especially not be able to get my Toshiba Blu - ray player to install.

  Finally I managed, still haven't exactly how, but somehow, to install the latest version 1.0.0.5.70A.
  The problem now is that the 3D feature do not always seem to work.
  When I open a 3D movie, I get only the image to view side by side, despite clicking 3D button.

  I tried to update the Nvidia driver (v290) to the latest version v314, available on the Nvidia for my graphics card, GeForce GT540M but whenever I get a message that the driver can not find hardware driver compatible. Eventually leave in the update files downloaded by Toshiba Upgrade Assistant I managed to install the v306. However, I still cannot install v 314, after the "system check" I always get the message that the driver can find hardware driver compatible.

  However, 3D does not always work. I noticed that the face detection (SuperD Xtune) does not automatically start with the Blu - ray player when I start or open a 3D file to be read by the Toshiba Blu - ray player, it was.

  How can I get my Blu - ray player to replay my 3D correctly.
  If I open Xtune I am able to calibrate the 3D, and then it closes.
  I don't see an app under all the apps that seem to have something to do with the face detection function.
  Is there a setting that needs to be changed, an additional driver must be installed or what?
  I'm really disappointed with the support I received from Toshiba themselves on this issue.

  I also wanted to update the BIOS of my laptop.
  My bios version is 2 December 2011, but I noticed that a newer BIOS is available from the Web of Toshiba site dating back to February 2012, if I'm not mistaken.

  I downloaded but when I run it I get a message that my computer is not compatible.

  * Bleep *, it's frustrating.
  I want to recover my 3D feature and don't forget to run the most appropriate and most recent drivers at any time.

  > Above all not be able to get my Toshiba Blu - ray player to install.
  > Finally I managed, still haven't exactly how, but somehow, to install the latest version 1.0.0.5.70A.

  After the upgrade to win 8, you will need to contact the call center Agent for download of the Toshiba BlueRay player to win 8 valuation

  > Eventually leave in the update files downloaded by Toshiba Upgrade Assistant I managed to install the v306. However, I still cannot install v 314, after the "system check" I always get the message that the driver can find hardware driver compatible.

  Cannot install the nVidia page graphics driver by running the exe.
  If you want to install a driver from nVidia page, you need a folder that contains the driver to the driver files, and then you can update the driver through Device Manager by using the Advanced installation procedure.

  > I downloaded but when I run it I get a message that my computer is not compatible.
  You will find on the page of the Toshiba UE driver BIOS v2.0
  The update of the BIOS requires value-added package that must be installed before trying to update the BIOS
  Also, the system driver Toshiba to win 8 must be installed.

  If you will not be able to update the BIOS Win 8 running, you should try updating the BIOS runs only pre-installed Toshiba system Win 7.

• I for the life of me can't figure out how to get my microphone to work

  I have tried everything I can think, I tried different ports, I tried to see if maybe my helmet had a specific driver, I need to download, I checked to see if it was silent or not several times, it worked until I reformatted so I know this isn't the helmet, I just want to understand this * output so I can play games You know? any help would be appreciated

  Hi Golfwang Amadeus,

  As you have tried various possible steps to solve the problem, try to test the headphones on another computer to make sure that the device is fine.

  -Which program you want to use your microphone with?

  We will try to test with XP built in tool.  Please follow the steps below.

  a. click on 'Start ' > select ' Control Panel ' > double-click "Sounds and Audio devices".
  b. Select the tab 'voice ' > under default device which device do you see? > click on "Test Hardware"
  If you get no sound, change your default device that I mentioned above, the parameter may be wrong.
   
  For more information, see:
  To set up a microphone

• Cannot get the unit to work in Windows 7 and Ubuntu 64-bit

  Running Windows 7 Professional 64 - bit Ubuntu 10.04.1 64-bit host as a guest.  After installing and upgrading everything (including VMWare tools) when I try to enter the unit I get the following error:

  The virtual machine cannot be set to Unity mode.  Check that the unit is supported for this guest operating system and the latest version of VMWare Tools is installed.

  This forum works on a Thinkpad T410S with turned on VT.  I also tried with Ubuntu 32-bit and the same problem occurs.  I have attached my vmware.log.  I also closed and restarted the host and the guest.

  Thank you.

  The authorization service is part of the process, although if this

  the service is not performed, a player will say that it is the cause. But to

  check, run "net start vmauthdservice" a high command

  fast and see if that gets the service runs.

  If services

  works OK and the connection is still blocked, so you

  disable, remove, or update any software is blocking.

• Cannot get my preloader to work

  Okay guys, I'm working on a new app for my iPhone using aswell AS 3 and I was doing my own preloader so that the user won't wait for the program without seeing load... so I made a loader bar, named: BarLoad and I don't you any error whatsoever, just that when I sync the app for the iPhone the bar does not load , just complete rest, and never play the thing, even when I play the computer, it does the same thing, and here is the code I wrote:

  Stop();

  addEventListener (Event.ENTER_FRAME, barLoading);

  function barLoading(e:Event):void

  {

  var total: Number = this.loaderInfo.bytesTotal;

  var loaded: number = this.loaderInfo.bytesLoaded;

  var percent: number = load/total;

  BarLoad.scaleX = percentage;

  trace (percentage);

  if(Percentage == total) {}

  removeEventListener (Event.ENTER_FRAME, barLoading);

  Play();

  }

  }

  Thanks for the help, I am kind with AS 3 again as you will probably notice.

  iOS (iPhone/iPod/iPad) cannot load a SWF file that contains the code. It is not yet generally advisable to try to load a SWF file at all unless you have a good reason. iOS simply does not support Flash at all. SWF is compiled down into ARM code and is therefore more SWF more. You have to stick to what the device supports.

  The screen is black is because you do not specify a splash screen image. You must create an image named "Default - Portrait.png" for the portrait and 'by default - Landscape.png' applications for landscape apps (or both for supported multi-orientation). Condition you this file with your iOS app when you export it. iOS automatically appear this picture at the launch of your application and will wait on this screen your application has finished loading.

  Usually people just use it as a loading screen. They put a nice picture to look the app with some texts like "loading, please wait...". »

  If you want to get more advanced you can always do as shown above. Outsource as much images, videos, audio files and content of all kinds (except SWF) you can import via the class leader of AIR. Then, you can view app loading.