Cannot get on computer as ADM.

Similar Questions

• Windows Recovery error screen: cannot get my computer to start!

  After using my computer for a long period of time, I set it down for a few hours. When I put it up again, the screen was blank and I couldn't get out of hibernation. I manually turned off and restarted. Reboot, I had the Windows recovery error screen, where I was given the opportunity to 'launch Startup Repair' or 'start windows normally '. At the launch of the repair, the screen empties for a few seconds and returns to the error page. When you try to start windows normally, the system rebooted and returned to the error page. I did nothing durastic which would result in this error. Windows was preinstalled and came with any disks. How can I fix my computer and recover my files? My computer is a laptop Gateway MD.

  Have you tried from disk running of all of the above programs.  Of course, some of them managed from the disk as the Startup Repair and system restore.  Others such as SFC and chkdsk or event viewer can be run from the disk by using the command line option (and instructions above on orders to enter).

  Startup Repair and system restore has nothing to help?  Try these other options from the command prompt on the drive if you can't even in Mode safe (which is not a good sign).

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Would never be able to stop or restart the computer in the menu after the 10.11.5 update and cannot get the 10.11.6 because iMac restart

  After the 10.11.5 update, that I could never restart or shut down my iMac (late 2013, 3.2 GHz Intel Core i5, 8 GB 1600 MHz DDR3) using the new menu. I can only stop it by pressing the button for a few seconds. I saw a few discussions addressing the question here and have tried to implement some of the solutions proposed, such as restarting in safe mode, deleting the application from Wacom-, but nothing has worked. Now I can't get the 10.11.6 updating or update my Adobe Creative cloud, incidentally, which became available to me, because I can't restart the computer. Do you know if this update would be better and solve the problem? Is there a way I can get this update even if I cannot restart the computer, or even to restore the system to an earlier version?

  Perhaps run EtreCheck and post the results here.

• have 425 dn which is network. Can get a computer tray see 3, but other computers cannot

  have 425 dn defined as network printer... Can get a computer tray see 3, but other computers cannot.

  How can I get others to see tray 3

  I'm sorry, but to get your question more exposure I suggest posting in the trade forums since it is a printer. You can do to Printers - LaserJet. Click new message.
  
  I hope this helps.

• I get an error code whenever I start my computer. I have loaded several packs of registry repair software but cannot get rid of the message. The message bed error loading c:\windows\system32\pofusido.dll the specified module is not found

  I get an error code whenever I start my computer. I have loaded several packs of registry repair software but cannot get rid of the message. The message bed error loading c:\windows\system32\pofusido.dll the specified module is not found

  Hello

  I googled this file pofusido.dll and it could be caused by a virus.

  I would suggest that you disable the restore mode as viruses use it to reinstall set apart them.

  Download and install the free http://www.malwarebytes.org/

  Restart the computer and keep pressing F8 to get into safe mode with network connection.

  Once you have updated Malwarebytes run and see if it can remove the virus.

  So delete all cookies in your internet Explorer.

  Please keep in mind that my answer is based on the information in your message. More the better I can answer, Slan go foill, Paul

• I replaced a HP with an Epson Stylus all-in-one printer and cannot get the printer to print more than one page when printing from the computer.

  Original title: new printer

  I replaced a HP with an Epson Stylus all-in-one printer and cannot get the printer to print more than one page when printing from the computer.  The printer works fine when printing from a laptop or ipad!

  Start by going here--> http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?UseCookie=yes&oid=232591&prodoid=63099059&infoType=Downloads&platform=nodetect

  If the web page has not correctly detected your operating system, select it by using the drop-down list.  Rather than using the "Combo package" recommended but huge, expand the "Drivers" section and download driver printer v2.32 to a location that you will remember later.

  • Click on the ORB start and go into devices and printers.
  • Select (click) the icon of your Epson printer.
  • Once you have selected the printer, a button labeled "Print server properties" will appear in the toolbar.  Click on this button.
  • Click the "Drivers" tab on the print server properties dialog box.
  • Select the Epson printer in the list of installed printer drivers, and then click 'remove '.
  • In the context menu, select "Remove driver and driver package" and click OK
  • Click Yes, and then delete
  • Once the removal process is complete, restart the computer (probably not really necessary, but can't hurt)
  • Install the driver and the software using the file that you downloaded earlier

  At this point, your printer should work fine.  However, if you want the ability to print by emailing a file to your printer, you may need to install both 'Remote Printer Driver v1.65' in the category 'Pilot' and "v1.30 utility Configuration of printer Epson Connect" in the "Utilities" category

• This computer cannot get internet service

  Original title: nomsnobtained

  This computer cannot get Internet service more today why?

  Hi Nick,

  Thanks for joining us on the Microsoft Community.

  According to the description of the problem, it seems that you have difficulty to connect to the internet.

  To help you to propose measures to solve the problem, I would appreciate if you could answer the following questions:

  1. you receive an error message or error code?

  2. what web browser do you use?

  3. what type of internet connection?

  4 did you do changes on the computer before the show?

  In the meantime, you can consult the following articles for more information on internet connection problems:

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

   

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Hope this information helps. Reply with more information about the issue so that we can help you better.

• Pavilion 15-d002TX: cannot start my computer. Getting an error like bootmgr is missing...

  I cannot start my computer. It is show as bootmgr is missing... Even he is not able to detect the boot device so that I can start it from a disc.plz help.

  Go into the diagnostic mode by typing F2 you power to the top or esc and select diagnostics... start the scan of the hard drive and report the results here.

• Cannot get into the BIOS on my Portege R700

  Hello friends,

  I have laptop Portege R700-1321.
  1 year a go, I was updating my version of BIOS to 2.20 and after that I have cannot get into the BIOS!
  try a passer-by but noway :(

  When you press F2 after you restart the computer nothing add and put it back again.
  try to change ro F10 boot order but still just restart :(
  I need to change the boot order to install the new OS fresh and of course my BIOS setting.

  Please help me.
  If any body had a same problem or know how to fix it :(

  First of all you n t need to change the boot order in the BIOS if you want to reinstall the new system.
  You can press F12 all turn on/off the unit.
  Then a menu should appear where you can change the boot device.

• Lost user account password and cannot get into Netbook

  We bought a Toshiba Netbook nb200 for our teenager for Christmas.

  She was so excited to get it and was on the computer immediately implemented its own user account without writing or allowing me the time to create a floppy disk for it.

  Now the user account won't let us. She said she knew what was the password and when we try, it doesn't work. We spent two days by typing everything under the Sun to see if we can get it and no luck.

  2 days after that Christmas and she cannot get into the computer at all.

  I tried SafeMode etc and does not work.

  Any suggestions on what it takes to please?

  Thank you.

  Try this...

  To retrieve the original factory image using the utilities on your computera? s internal disk storage:

  1. make sure that the computer is turned off.

  2. press in and hold the value 0 (zero) key on your keyboard all turn on/off the computer.

  3. If your system offers a choice of Windows® 7 32-bit or 64-bit operating system, you can select one right now. If this is not the case, go to step 4.

  4. a warning screen opens, indicating that when the recovery is performed all data will be deleted and rewritten.

  Click Yes to continue. Follow the instructions to do a full restore...

  HTH,

  The f

• Photosmart c7180 cannot scan any computer file except C:\Users...etc... \Scans.

  New desktop computer. New OS than Windows 7, 64 bit. Office Enterprise 2007. Software loaded new Photosmart c7100 CD purchased from HP as directed.

  Photosmart c7180 cannot scan any computer file except C:\Users...etc... \Scans. I want to scan to E:\

  Nothing wrong with the scanned image. No error message.

  Found. Settings, scan settings, scan to... Configuration, settings button, buttons search for the solution Center, manage shortcuts scan... and then create new shortcuts in the folder of your choice!
  How bypassed can you get?

• trying to put in place the 2nd user account and cannot get a password

  you have a user account, but cannot get a password

  Hi MaryFotta,

  It seems that you cannot create a password for the second user account.

  I will definitely help you with this.

  1. what version of Windows is installed on the computer?

  2 user are. What account you referring?

  For more information, visit the following links and check.

  Create a user account

  http://Windows.Microsoft.com/en-in/Windows7/create-a-user-account

  User accounts: frequently asked questions

  http://Windows.Microsoft.com/is-is/Windows7/user-accounts-frequently-asked-questions

  It will be useful. If you have any other questions, feel free to let us know. We will be happy to help you.

  Thank you.

• I installed Internet Explorer 8 and cannot get an internet connection...

  I installed Internet Explorer 8 and cannot get an internet connection using this program.  However, I get a connection very well when I surfed with Firefox.  I tried to disable the firewall and still no connectivity.  I am connected through a Netgear router with a hard line.  The signal is strong.  When I run a diagnostic on Internet Explorer, I get a message from the bed... WINDOWS CANNOT CONNECT TO THE INTERNET USING HTTP, HTTPS, OR FTP.  THIS IS PROBABLY CAUSED BY THE SETTINGS OF FIREWALL ON THIS COMPUTER.
  CHECK THE SETTINGS OF FIREWALL FOR THE HTTP PORT (80), HTTPS PORT (443) AND FTP PORT (21).
  YOU MAY NEED TO CONTACT YOUR INTERNET SERVICE PROVIDER OR THE MANUFACTURER OF YOUR FIREWALL SOFTWARE.
  No idea how to solve the connection on Internet Explorer?

  run malwarebytes.

  Also, try the following

  1. internet options and click the Connections tab
  2. and then click LAN settings and uncheck everything.
  3. and then click on apply & ok.
  MCP. MCDST. LVL 80

• Occult video BIOS BIOS occult system and I cannot get into the bios?

  IT SAYS: System hidden BIOS Video BIOS with a shadow and I cannot get into the bios?  WHAT CAN I DO

  Hello

  Why you try to go into the BIOS (Basic Input Output System)?

  For the problem with the BIOS (Basic Input Output System), I recommend you contact the manufacturer of your computer for help.

  Note: Changing the BIOS / chipset can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/chipset can be solved. Changes to settings are at your own risk.

  Hope the helps of information.

• Cannot get online after installing windows XP Edition family on my laptop which was origally XP PRO

  I have a laptop HP Compaq 6830 s that had xp professional did not get a disc of bone with it when buying. The system crashed 0x0000007B error code. I installed OS XP Home version Pro Version and now I't does not recognize my modem or ethernet. Cannot get online. I'll tho the HP site and they don't have that driver for XP Pro Downloads Home Version. I go to the Device Manager and have question marks on the following - ethernet controller (PCI bus 134, device 0, function 0), network controller (bus PCI 3, device 0, function 0), PCI Device (device function 27 of the PCI bus 0 0), Universal serial bus (PCI bus 0, device 29, function 7) (USB) Universal Serial Bus controller (bus PCI 0) (, 26, function 7 device), unknown device (on PCI bus) properties, the properties of the unknown device (on system compatible ACPI Microsoft) and the properties of video controller (VGA Compatible) (bus PCI 1, device 0, function 0) all the points mark have (Code 28). Is there any wat I can fix this or should I install OS XP PRO?

  Go here--> http://www8.hp.com/us/en/support-drivers.html

  Enter the model of your computer.  If you just enter 'Compaq 6830 s' you get 3 choices.

  For example, I clicked on the link below and select the link for "XP Professional" coming to this page--> http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=3688717&prodTypeId=321957&prodSeriesId=3688712&swLang=13&taskId=135&swEnvOID=1093

  You're right; There are a large number of items on this page.  You may be able to refine things if you enter your full product number, but if not, here are some general indications:

  "" For each of the downloads, click each tab on the download page and read the information on 'Description' improvements,' 'Instructions of Installation","System requirements"," Release Notes, "and"Revision history" before you install the downloaded driver.

  • Start by "Driver - Chipset" and use "9.1.0.1007 a (January 16, 2009).»
  • Then go to "driver - storage.»  Install the Intel Matrix Storage Manager driver.  Optional, but probably very desirable, install the new version of HP 3D DriveGuard.  You probably don't need (at least for now), the driver of chip card reader (unless you have an external drive of smart card).
  • Then go to "- Audio driver." Install the driver Microsoft UAA and the most recent drivers SoundMax ADI.
  • Then go to 'Pilot - graphics.' Install the new ATI video driver.
  • Then go to "driver - network."  It's a little more complicated.  Install the Marvel Yukon Gigabit Ethernet controller driver.  This will allow you to connect to your cable or DSL or your router by Ethernet cable.  You must determine if your particular laptop has an Intel or Broadcom wireless adapter.  Looking in the Device Manager in the "Network adapter" section, you should be able to make this identification.  Install the driver for the appropriate device.  If you believe that your laptop is Bluetooth compatible, install this driver as well.  The HP "wireless Wizard" is optional.  I would delay installing this at this stage.
  • Then go to "Driver - keyboard, mouse and input devices."  Install the Synaptics Touchpad driver and one for the HP Quick Launch buttons.

  At this point, most of your hardware should work correctly.  If there is always warning icons in Device Manager, you should be able to understand... or ask again here.  Read the 'Description' for other downloads to see if this is something you want or need.  Be aware, however, that many "Software" downloads are only updates or patches and not the complete package (which probably would have been preinstalled on a new computer.