I installed Internet Explorer 8 and cannot get an internet connection...
I installed Internet Explorer 8 and cannot get an internet connection using this program. However, I get a connection very well when I surfed with Firefox. I tried to disable the firewall and still no connectivity. I am connected through a Netgear router with a hard line. The signal is strong. When I run a diagnostic on Internet Explorer, I get a message from the bed... WINDOWS CANNOT CONNECT TO THE INTERNET USING HTTP, HTTPS, OR FTP. THIS IS PROBABLY CAUSED BY THE SETTINGS OF FIREWALL ON THIS COMPUTER.
CHECK THE SETTINGS OF FIREWALL FOR THE HTTP PORT (80), HTTPS PORT (443) AND FTP PORT (21).
YOU MAY NEED TO CONTACT YOUR INTERNET SERVICE PROVIDER OR THE MANUFACTURER OF YOUR FIREWALL SOFTWARE.
No idea how to solve the connection on Internet Explorer?
run malwarebytes.
Also, try the following
1. internet options and click the Connections tab
2. and then click LAN settings and uncheck everything.
3. and then click on apply & ok.
MCP. MCDST. LVL 80
Tags: Windows
Similar Questions
-
When I got the laptop - I was able to connect for about 3 days and then nothing - the yellow icon with the! inside he keeps display, or the router icon comes up - there is an internet connection availabe, but after going through all the steps to connect, nothing happens - my router works fine - I use it on another laptop and my desktop computer also works very well - different messages to arrive at different times on the problem. , but no diagnosis has been able to solve the problem.
Hi Diane,
In addition to the advice given, I would have you look at this article and check if the given steps help you correct the problem.
Also, this might be handy in the future.
Thank you!
-
try to download and install cs5 online and get the message "'Install.app' is corrupted and cannot be opened. You must eject the disk image. »
You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.
Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.
CS5: http://prodesigntools.com/all-adobe-cs5-direct-download-links.html
-
Windows service install is not accessible and cannot be installed correctly.
WINDOWS SERVICE INSTALL IS NOT ACCESSIBLE AND CANNOT BE INSTALLED CORRECTLY.
Suddenly, I can't download my Quicken bank account information or anywhere else. I first was getting the message THAT WINDOWS INSTALLER can NOT ACCESS THE SERVICE DO MAY NOT BE INSTALLED CORRECTLY. Now he wants me to search the Web, but I can't find any help you do not have to buy. It is a new laptop with Windows 7. Please HELP I've worked on this all day!For any question on Windows 7:
http://social.answers.Microsoft.com/forums/en-us/category/Windows7
Link above is Windows 7 Forum for questions on Windows 7.
Windows 7 questions should be directed to the it.
You are in the Vista Forums.
See you soon.
Mick Murphy - Microsoft partner
-
virus: I struggled with the virus for some time and cannot get rid of them
I have struggled with the virus for some time and cannot get rid of them. I bought a few programs, but they have also been infected. any suggestions for a really good virus buster.
Hello
First of all, an antivirus solution to an already infected system of loading is usually pretty useless. The bug will block all attempts to remove or load what it sees as a threat. Second, without knowing which virus you are affected by, it is difficult to be precise.
You can take action include:
(a) work in safe mode, there is much less likely that the virus is able to load and resist actively.
(b) the safe mode, run utilities malwarebytes.org and AV solution that was installed * before * your infection.
(c) post is back with a better description of what is on your system to learn more targeted advice.
Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org
-
Original title: new printer
I replaced a HP with an Epson Stylus all-in-one printer and cannot get the printer to print more than one page when printing from the computer. The printer works fine when printing from a laptop or ipad!
Start by going here--> http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?UseCookie=yes&oid=232591&prodoid=63099059&infoType=Downloads&platform=nodetect
If the web page has not correctly detected your operating system, select it by using the drop-down list. Rather than using the "Combo package" recommended but huge, expand the "Drivers" section and download driver printer v2.32 to a location that you will remember later.
- Click on the ORB start and go into devices and printers.
- Select (click) the icon of your Epson printer.
- Once you have selected the printer, a button labeled "Print server properties" will appear in the toolbar. Click on this button.
- Click the "Drivers" tab on the print server properties dialog box.
- Select the Epson printer in the list of installed printer drivers, and then click 'remove '.
- In the context menu, select "Remove driver and driver package" and click OK
- Click Yes, and then delete
- Once the removal process is complete, restart the computer (probably not really necessary, but can't hurt)
- Install the driver and the software using the file that you downloaded earlier
At this point, your printer should work fine. However, if you want the ability to print by emailing a file to your printer, you may need to install both 'Remote Printer Driver v1.65' in the category 'Pilot' and "v1.30 utility Configuration of printer Epson Connect" in the "Utilities" category
-
I have a Mac Book Pro and I am trying to install the ambient light and I get the error message (205) that my firewall is turned on and is not. My computer is not compatible, or I'm just not doing something right.
Please specify the version of Mac OS for reference. just in case if the procedure below did not work.
N ° 1)
1) click the icon of the Apple menu and select System Preferences, and then click Network.
(2) choose the network that is currently connected to the internet can you Ethernet or Airport (Wireless).
(3) then click on the Advanced button, then click proxies.
(4) slot 'Select a Proxy Server to configure' uncheck all the boxes proxy, then uncheck "Use FTP Passive Mode (PASV)".
(5) then click on the Apply Now button.
Then try to reinstall Adobe Creative cloud,
Always the same?
(1) right click on the Finder on dock icon and select the option "Go - To Folder."
(2) you will get a text box, type in below mentioned command and then press 'return './ etc
(3) it opens the etc folder, please search for the file named ""host " and copy the same office screen.it"
(4) double click on the Hosts file, it will open it with TextEdit.
Let me know if you see any Adobe related as entries in the Hosts file 127.0.0.1 activate.adobe.com... etc?
------------------------------------------------------------------------------------------ -
No entry to Adobe? You can follow the procedure below:
-----------------------------------------------------------------------------------------
Please follow the steps below:
N ° 1)
Click on the Finder and search options listed next to icon located Apple in the upper left of the screen and click on the "Go" menu button and select 'utilities '.
(Applications > Utiliites)
Look for a CC Adobe and Adobe Application Manager folder under utility window and trash both folders.
Step 2)
Click on the link below and download & run the cleaning of Adobe tool:
Select the option "Adobe Application Manager for Mac OS X 10.6" and then click on "Clean up selected."
Step 3)
(1) right-click on the icon in the Finder, then select 'Go - To' folder.
(2) you will get a text box, type in the following command and then press the 'return '. (Don't miss ~ symbol)~/Library
(3) then navigate to Application Support > Adobe
Open file Adobe and trash folders named AAMUpdater and OOBE.
Step 4)
(1) right-click on the icon in the Finder, then select 'Go - To' folder.
(2) you will get a text box, type in the following command and then press the 'return './ Library
(3) then navigate to Application Support > Adobe
Open file Adobe and trash folders named AAMUpdater, Adobe Application Manager and OOBE.
Step 5)
Click on the link below and open Photoshop Elements download link.
Do not close the page, just keep it open.
Download Photoshop Elements products | 10, 11, 12, 13
Click on the link and download file DMG cloud creative Installer directly below and install Adobe Creative Cloud app:
http://trials2.Adobe.com/AdobeProducts/KCCC/1/OSX10/ACCCx3_0_0_74.dmg
-
I have a HP G60-214EM laptop and cannot get it connected to my samsung 26 "smart tv. Can anyone help?
Hello Maureen56,
I understand that you want to connect your TV to your laptop.
To connect your computer to your TV HDTV using an HDMI cable, follow these steps:- Locate the HDMI port on the back of your TV. It should be more than one, in order to choose the one that is otherwise unused. Note the port on which you choose.
-
I formatted my hard drive and xp wouldn't charge b/c he didn't see the hard drive. I then installed Windows 7 starter and cannot be upgraded. .
Probably, you need to boot in the BIOS of the computer and changed on the hard drive in IDE mode, SATA, so it can be recognized by Windows XP.
Before that you plan to replace Windows 7 with Windows XP. Have you tried to familiarize yourself with the operating system first?
http://techingiteasy.WordPress.com/2009/08/19/for-the-former-Windows-XP-user-welcome-to-Windows-7/
If you want to run Windows XP, you can consider to dual boot Windows 7 and Windows XP. You first need to know if your computer is compatible with Windows XP. Much more modern computers are gradually support for Windows XP.
How dual boot Windows 7 and Windows XP
http://notebooks.com/2011/02/01/how-to-dual-boot-Windows-7-and-Windows-XP-Part-1/With Windows XP installed first:
http://notebooks.com/2011/02/17/how-to-dual-boot-Windows-7-and-Windows-XP-Part-2/ -
When you try to install downloaded Photoshop_12_LS1.dmg, an error message "" Install.app"is damaged and cannot be opened. You must eject the disk image. "This has happened on multiple downloads of the dmg. How to fix this, please?
See the link below:
-
Hi, I am trying to install Adobe Creative Cloud and I get error 43. I tried to use the Adobe cleaning tool and uninstall but nothing has changed. What can I do?
Hi carlottav39691716,
Please see the following links:
Error 43 - I can't download any adobe apps CC or creative cloud Manager
Creative cloud, re-install-Dungeon error 43
Error in downloading, installing or updating Adobe Creative Cloud applications
Let us know if that helps.
Kind regards
Sandrine Bani
-
attempt to analysis and I get: interface: not connected, option: unknown
Yes, 64-bit. I downloaded the correct drivers
Right - we have established that. What I asked (or thought I asked, sorry for any confusion) was the seocond time:
Is the error you receive [interface: not connected, option: unknown] from a native Windows application, you are running OR the scanner utility Epson or som another application?
I ask because it is important to know which application is gving you the error because those who are integrated into the code, usually. The errors mean more if you know the name of the application giving error while looking for the error itself. Epson has what he calls, "Epson Stylus NX300 and NX305 EPSON Scan Utility" and I was trying to establish whether it is what you use when you try to scan and so what gives you the error [interface: not connected, option: unknown] you have found?
For example, a google search for:
the Epson scanner interface: not connected, option: unknown
Give some success (including this conversation.) You may need to contact Epson directly support to help with it.
-
Re-installed Windows XP and now I can't see the network connections and cannot get online.
Our pc is down a few days ago, so we reinstalled xp. The xp upgrade. Now, we show no internet connection and can not get on the net. Our Device Manager indicates a problem with the drivers being not downloaded on the network adapters. Also the modem is not recognized when I try to connect. I tried to download the fix for me on microsoft for a flash player and it did not work. Can you please help me reinstall it? Thank you
original title: reinstalling Windows XP
Go to your computer manufacturer's support web site and search for the Windows XP drivers for your specific model number.
If there are Windows XP drivers, then download to a folder on your hard drive and install them all, starting with the card mother/chipset drivers, LAN, Audio, USB, SATA, etc, and so on.
List of computer manufacturer support sites:
http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturersIf you have an Intel motherboard, you can try the Intel driver update utility: http://www.intel.com/support/detect.htm?iid=dc_iduu
Tips for solving common driver problems
http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems
Vista: http://windows.microsoft.com/en-US/windows-vista/Tips-for-fixing-common-driver-problemsGraphics/video drivers:
Check the download site of the manufacture of the graphics card for the newer Windows XP drivers for your card.
ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-usJ W Stuart: http://www.pagestart.com
-
I bought 5 Fusion pro and cannot get the VMware Tools to install
Bought a new iMac and bought Fusion 5 Pro. I have a 5 year old and reclassified iMac Fusion 4-5 fusion and had no problems. The new computer is for my wife and I tried and tried to migrate the laptop and it failed every time. So, I did a clean install of Windows 7 and before I downloaded everything that I installed VMWare Tools. For the past 2 days, I was passage of the files from the laptop and install programs that she had on the laptop. Problems with Word and excel as they sit a spin. Money went to re - install VMware Tools and it launches the installation program and then comes up with an error message...
Error 1606: Could Not Access Network Location
\\<host>\users\administrator\my
documents
Went into Windows to uninstall VMware tools and he started the uninstall program then stopped and got the same message. I can not uninstall tools and cannot re - install the tools. I need help to solve this problem. I'm a guy of plug-and-play and if there is code to do, in my opinion, I'm sunk.
Anyone have any ideas on how to solve this problem, so I can get up and go?
Extra solution after Woodys - please check if mirror folder is enabled or not, if it is enabled, please disable it then try to reinstall the tools.
-
I had taken a pop up ad my email inbox page and tried to do the same to the other on the opposite side of the page. I think that this announcement is not a pop up but a part of the Inbox page. Like I did with the pop-up ad, I click right on it and then click on "View Page Info". I then went to the "Permissions" window where there are 7 categories, with the option 'use default' is checked. I unchecked all of them and checked the 'blocked' for all 7.
As soon as I closed the window, I was thrown off my Inbox and was returned to the login page for my email. When I went to reconnect, I was unable to. I'm stuck on the login page and it won't let me access my Inbox. I called MRC, my provider, who was able to get right. Then, I used my Internet Explorer browser and was able to get into my perfectly fine e-mail inbox. The 'tech' at the MRC says it has something to do with Mozilla and I tried to reset but warned me that I'll lose all the settings. I am reluctant to do so and I would be grateful if you very well the folks at Mozilla to tell me what happened and how to fix it.
Thank you.
You can undo your changes to authorization. Probably the most relevant is cookies. Try one or two of these methods:
(1) page Info > permissions tab
While displaying a page on the site:
- Right click and select View Page Info > permissions
- ALT + t (open the classic Tools menu) > Page Info > permissions
(2) approximately: permissions
In a new tab, type or paste Subject: authorizations and press ENTER. Allow a few moments for the list on the left to fill, because this information must be extracted from a database.
Then type or paste NCR ' in the search box above the list to filter to more relevant areas. When selecting a domain, you can adjust its access permissions in the right pane.
A little luck?
Maybe you are looking for
-
Apple TV 4 show white screen apps after failure
Hi, have you had the same problem with apple tv 4? At each time after a power outage, when I try to open third-party applications on apple tv 4, it only shows white screen. Built-in apps work fine. I tried the reset. It worked. BUT! It is a thing of
-
Mirror and rotation of whole groups of components layout
How it is possible to rotate or whole groups of mirrored components? If you select a group of components and apply the mirror or rotation on each component group feature is mirrored or rotated separately and not as a group.
-
The monitor flicker When I turn on my monitor it flickers, then return, must turn on and off several times and then finally works. Just started in Charleston that happens, it's a sign that my monitor is exhausted?
-
Problem to adjust the data using the algorithm of lev - mar...
Hello I'm a casual user of LV, and I need signal level using a non-linear custom model. The signal is basically a decay of exp (order 1) with a continuous component, so it's pretty simple. When I apply the routine of Lev - Mar's non-linear editing, I
-
How change windows and not lose the drivers and programs?
Hey guys want to just ask, I acres, I bought it with windows 7 Home premium installed but I bought windows 7 ultimate and I want to change the windows, but the only thing that I'm worried about is when I format the HHD of re - install windows ill los