To replace the noisy fans in HPE h8-1030

Similar Questions

• I would like to replace the noisy fans HP m9360f with quieter models upgraded.

  I've lived more loud noise of my Pavilion m9360f fan lately and am interested in replacing the processor fan and case fan as well.  Unfortunately I can't find any references or suggestions for improvements (here these new fans to be as quiet as possible). Honestly, I don't know yet what sizes the m9360f requires.

  Can you advise what direction I need to go?  I appreciate everything that you can provide.

  kcmac,

  Processor fan and case fan should be 80 mm (3.25 ") and 92mm (3.6") respectively. The measures are.

  Here's how to check: http://db.sanyodenki.co.jp/product_db_e/coolingfan/dcfan/dc_fan_detail.php?master_id=1993

  Audible noise is deemed be 21dB. The problem with low noise fans is their lower speed (RPM).

  Determining CFM has been the most difficult issue. Try Googling "5188-3722 CFM" (rear case fan is a #5188-3722), and you'll find it varies, but 40 CFM seems common response.

  Now install this to control the ROTATION speed: http://www.cpuid.com/downloads/hwmonitor/1.19-setup.exe

  Then save the idle and max RPM under load is heavy.

• How to disassemble the Qosmio E10 to replace the cooling fan - need manual

  Does anyone have instructions on how to disassemble the E10 to replace the cooling fan. a G25 irisvista.com all the other models, but the design is not the same.

  Now stuck at removal of keyboard connector.
  No idea what fan model numbers so I can order before the band down.

  Hello

  Unfortunately, it seems that there is no information on fan replacing on the laptop of the G10. These documentations are not for public use, but only for the Toshiba authorized service providers :(

  Apart from this fact it s not advisable to disassemble this laptop if you have no experience! During the disassembly process, you could damage the motherboard or something else

  So I think that he of better go to a technician because he has more experience.
  In addition, the taken cooling module supported and compatible can be ordered from the Asp in your country

  have a nice we

• Pavilion Dv6: Replace the cooling fan

  I need to replace the cooling fan. Please provide the manufacturer for notebook described below.

  Pavilion Dv6-6135TX

  Product # QC328PA #ABG

  Processor: Intel Core i7-2630QM CPU @ 2.00 Hz

  Installed memory (RAM live): 8.00 GB

  Thank you in advance!

  Dear customer,

  Please try the steps below to determine the size.

  1. Open the control panel.
  2. Select display.
  3. Select the screen resolution.
  4. Select Advanced settings.
  5. Select the map tab. Here, you'll see how much of total graphic memory available with dedicated video memory is available on your system.

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the white button on the right to say thank you Thumbs Up *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  GBL84

  I'm not an employee of HP

• need help on my pavilion DV7 enter the case to replace the cooling fan.

  I the new fan and have removed all the screws that I could find, removed HARD disk Memmory and removed all the screws, how the case apart?

  You can pass by the maintenance and Service guide for the computer laptop dv7 and find out how to replace the cooling FAN. Please be aware that void you the warranty by yourself.

  http://h10032.www1.HP.com/CTG/manual/c02638165.PDF

• Satellite L500 is not start after replacing the CPU fan

  Hi guys, I just replaced my cpu fan because the former was noisy and only working at half speed, I also had a couple of farm of downs due to overheating. The day that I removed the old fan the laptop was working fine and I stopped via the Start button and disconnected power and all the other wires.

  I installed the new fan today, put everything, plugged in the power cable, power led ok, ok... hold the power button led charge, led came to start on, turning on the fan, no hard drive does not display goes out again in 20 seconds, only power led and led load display.

  Unplugged all, disasembled and checked all my connections were ok, tried, always the same problem, checked the fleas memory sharp and even cleaned for hard drive always the same problem...
  Anyone out there who can help me please...?

  Best regards, Hans

  Did you remove the CPU or have you checked if its places correctly?
  Have you added the cooling grease after removing the cooling module?
  Hmm, but it looks like a little you damaged the Council why disassemble unit.

• Replacing the CPU fan

  HI, would like to replace my CPU fan. I am under the HP/Compaq SR2180NX, processor is a Pentium D 2.80 GHz. Running win7 64, Fan is running and very hot.

  Spoilt for choice here: http://www.newegg.com/Product/ProductList.aspx?Submit=ENE & Depa = 0 & Order = BESTMATCH & Description = cpu % 20fan % 20775 & IsRelated = 1 & cm_sp = KeywordRelated-_-cpu_fan-_ - cpu % 20fan % 20775

• Should I replace the system fan or any laptop?

  For the last day, I was doing some 90 b error code when I turn on my computer. It says my system fan does not work properly and could cause problems. If I continue however, it will work for about 7 minutes, and just turn off. The left back will be really hot.

  I called HP today and they will fix it for $180 & give me a 3 month warranty, but is it useful? My computer is only 2 years old. I could just replace the entire computer through my work. Should I repair or replace?

  It is a 15 "Pavilion amd8 quad-core, 8G RAM, 1 TB HD

  Moon.

  Cleaning would be easier to try.

  It is a G6 and you would have to completely demolish the laptop to reach the fan to replace it.

  

  Try clean it first.

  If this does not work, you will need to decide what is best for you.

  REO

• Pavilion G7 1070us replacing the cooling fan

  I have a mobile Pavilion G7 1070us requiring a fan and heatsink of the replaced machine joint.  The part # is 646578-001 fan.  the part # is 643256-001 heatsink.  on the heat sink, there's a part # 4gr12hstp80.  I found the same fan and the heatsink to replace, but with different reference numbers (heatsink heat part #643258-001, 4gr13hstp80) for sale at a supplier (costs and shipping charges).  My question is: has your repair story has proved that this cooling fan works in the computer pavilion G7 1070us laptop?  Thanks for the reply.

  I found this on eBay: http://www.ebay.com/itm/HP-COMPAQ-G7-LAPTOP-HEATSINK-COOLING-FAN-P-N-643256-001-T23-/300785881384?pt=UK_Computing_Other_Computing_Networking&hash=item46083c5128

• Replacing the front fan is no longer functioning

  Replacing my front fan,

  no longer works after removing the stock cooler to replace it with this -.

  who I couldn't screw at bottom, because the media have no hexagonal bolts, they just circles, which can be entered. After placing the return stock, and plug it into the power of the gpu and put back in the gpu, which I had removed it, the front fan is not started. I had not disconnected the power cord before. My only guess is that it can be crushed behind the GPU, which is double-wide, why I removed the first 28 mm fan for a 20mm. The 20mm worked until I did this.

  The fan was just stuck.

• Pavilion 423.teleglobe uk replacing the cpu fan

  Hi, first post so hope gives enough information.

  The CPU fan above radiator has a missing Blade (no idea what happened and not in the case!).  The computer has been used very slow for a few months and this may have a role to play.  I formatted and replaced Windows XP a few times and always very slow.

  I tried to get a replacement without success and I was wondering if anyone can help on where to get a new?

  Thanks in advance

  livingstonc wrote: thanks for the quick reply, almost there now with replacement and without your help would always look. Can get one of US not UK, but before I do, like that of the UK and you want thoughts so well?

  http://www.eBay.co.UK/ITM/Coolermaster-silent-led-80mm-fan-SAF-S83-E1-GP-/170750498007?PT=Computing_ComputerComponents_Fans_Heatsinks_SR&hash=item27c185d4d7

  Thanks again.

  Hello livingstonc, I'd be a bit wary of this model, because it has only 2 000 rpm and speed to other Coolermaster is 2 500 rpm. This may not provide enough air cooling of the CPU under load.

• Help to replace the heatsink / fan - HPE 360z

  This part has tumbled off the coast of an afternoon. I didn't know big thing, but from what I have studied, we need maintain my cool CPU (I think his name a heat sink). I am very confident, I can replace it, but I don't want to order the wrong part. (See the attached photos below).

  

  

  

  Specifically, I only need the black plastic part that screws into the mortherboard. There is a small plastic latch that came loose (I circled it on the photo). I doubt they sell these individually, then I would be ready to buy a new heatsink if necessary.

  

  Could someone direct me to where I could buy a new one? I don't think that STROKE manufactures this particular model more. Here's the info from my desktop Hp I would have included a link to the PDF of HP, but it seems that it is illegal:

  • Product name: HPE-360z
  • Product number: WX520AV
  • OS: Windows 7

  A direct link to a compatible part on newegg, Amazon, etc. would be extremely useful. Please let me know if you have any questions.

  Thank you very much in advance!

  I hope that this answer to your needs:

  http://www.Newegg.com/product/product.aspx?item=9SIA27C15K9408&nm_mc=KNC-GoogleMKP&cm_mmc=KNC-GoogleMKP-_-PLA-_-TV+mounts-_-9SIA27C15K9408

  http://www.Amazon.com/AMD-CPU-bracket-base-socket/DP/B004W446B4

• Want to Phoenix 860-010: problem with fonts and the noisy fan

  I have a new machine, just a day old, and I'm having a problem with fonts.  The file Explorer, Edge and other similar programs seem to go from a very readable font that lights up in half a second or less whenever I move down on the page in these applications.  Police that results is much more difficult for me to read because of the lightness that results. I have not met this problem before.  Frankly, I don't know the source of the problem.  Is it hardware (video card) or (Windows 10) operating system software?

  Hello @PhotoGene47,

  Thanks for the quick response!

  Have you tried to see the document that I mentioned in my previous post?  If you prefer to have the Board repaired, you can consider contacting the HP support by phone for additional options.  Please use the following http://www.hp.com/contacthp and create a folder for your question and contact HP. If you do not live in the United States / Canada, please click on the link below to get contact information for your region.
  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  I hope this helps.

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Kind regards!

• Replacing the fan for w/15.4 "screen and GPU integrated T60

  Greetings,

  The combo fan/heater several months ago, I bought for my T60 was apparently the 41W6409 for a T60 with discreet gpu and cpu, but mine is an integrated model that uses the 41W6408.

  As I can't return it, I was just thinking to replace the old fan with that on the new heatsink. But I'm not sure that it will fit, being the only FRU I could find for the Fan/Heatsink combo.

  So, I was wondering if someone here who happened to know if these fans are the same.

  Thank you very much in advance.

  Steve

  Skater wrote:

  Greetings,

  The combo fan/heater several months ago, I bought for my T60 was apparently the 41W6409 for a T60 with discreet gpu and cpu, but mine is an integrated model that uses the 41W6408.

  As I can't return it, I was just thinking to replace the old fan with that on the new heatsink. But I'm not sure that it will fit, being the only FRU I could find for the Fan/Heatsink combo.

  So, I was wondering if someone here who happened to know if these fans are the same.

  Thank you very much in advance.

  Steve

  Steve, you can use the unobtrusive radiator on your integrated motherboard. In fact, the best option in my opinion is to go with a T61 heatsink that is designed to cool the much more powerful X 3100 graphics and uses the thermal paste rather than pads type blade of silicone used to cool graphic systems T60. Alternatively, you can replace these pads with thermal paste on the heatsink T60 but unity T61 is better in my opinion. I can't tell you if the fans are interchangeable, because there was more than one fan used on the T60 models intel, some were, and some were not. There was also a discreet couple different sinks of heat, but will be more than enough for the cooling of your integrated graphics. Platform which cools the discrete gpu will not be used so it isn't a problem and cooling chipset platform will suffice for the cooling of your integrated graphics.

• Replacing the fan HP Pavilion DV5000

  Hello

  Fan on my laptop has become very strong, so I opened my laptop to clean. Now, everything works great, much better than before. I have changed the thermal paste, cleaned all the peace of dirt etc.

  Now, I want to replace the old fan with a new one. This is because there are a couple of models fan I need, but with different W - watts (1.3 to 1.7). I'm not sure what is the correct W for my fan (p.s. I tried to open the fan, so I removed the thumbnail). They all have the same tension - 5.

  Model fan is SUNON GC055515VH-A

  Help, please.

  Thanks in advance.

  Todd

  The part number for your fan is 407807-001.

  After a quick search, I found it on amazon. I have included a link below.

  http://www.Amazon.com/exec/Obidos/ASIN/B005CIN5CK/

  I hope that helps!

  Kyle