Cannot grant the privilege on the column the user through role?

Hello:

From what I read in the docs I should be able to create a role that has privileges to UPDATE a column in a table and then assign this role to a user, that should be able to update the column in the table. I get "insufficient privileges" when I try which, although it works as advertised if I book directly to the user. I read the docs wrong?

WATCH session:

CREATE TABLE "GAFF"."FOO2" 

   (    "F1" NUMBER, 

    "F2" NUMBER, 

    "F3" VARCHAR2(50), 

    "F4" NUMBER, 

     CONSTRAINT "FOO2_PK" PRIMARY KEY ("F1")

/



create role foo2_u_f2;



grant update (f2) on foo2 to foo2_u_f2 ;



grant select on gaff.foo2 to play ;



grant foo2_u_f2 to play ;

GAME session:

update gaff.foo2 set f2 = 1 where f1 = 1

ORA-01031: insufficient privileges

Probably foo2_u_f2 role is not a default role to the user's game. Initially, when the user is created the default role is set to ALL. Later, it can be changed to NONE or set of roles. Log in as a game and question:

select * from session_roles
/

I bet that you won't see any foo2_u_f2. Then the question:

select granted_role,default_role from user_role_privs
/

This will give you a list of the user default set roles. Another question, you can:

set role foo2_u_f2
/

This will allow the role of foo2_u_f2 in the current session. Or you can identify you as privileged user and issue AMENDED the USER default ROLE..., foo2_u_f2.

SY.

Tags: Database

Similar Questions

'Environment of the user' Windows cannot load the user's profile, but you have logged on with the default profile for the system.

Original title: the user environment

After starting windows, on the Welcome screen, this message always comes.
"User environment.
Windows cannot load the user's profile, but you have logged on with the default profile for the system. DETAIL: Not enough memory is available to process this command.

And all my files that I save before you shut down or restart my pc all the my sample files on the desktop, my documents disappear...

Thanks... :)

This is typical of a corrupted profile. To recover, perform the following steps:

"How to recover damaged Windows XP user profile"
<>http://support.Microsoft.com/kb/555473 >

Almost always, corrupt profiles are accompanied by damaged drive. During recovery, run a disk check with the /r or /f on your computer option.

"How to perform disk error in Windows XP check"
<>http://support.Microsoft.com/kb/315265 >

HTH,
JW

Adobe Story in error "cannot load the user's preferences" then I have to disconnect

I try to access Adobe Story, but whenever I connect I get an error saying "Cannot load the user's preferences", then I have the ability to log out, but nothing else. I tried this using the desktop application as well as several browsers on my Mac and my PC. I tried to raise that this issue with the chat support however could not help with the issue. What can I do to solve this problem and power access to my account?

Hello

Can you please try again? He still does not?

< critical > < WebLogicServer > < BEA-000254 > < cannot pass the user "psoftusr".
Hi all.

have a customer problem with permission to userid where they get an error in the application of patches.

It's customers comment:

We suspect that our psoftusr of the user who starts the Web server on a port higher than 1024 doesn't have the correct permissions to start
without getting the error

August 30, 2008 9:16:41 CEST > < critical > < WebLogicServer > < BEA-000254 >
< cannot pass the user "psoftusr". java.lang.IllegalArgumentException: cannot initgroups(3) ("psoftusr"), system error: "no owner".

problem is that once I go into the Admin Console and change the settings to enable the liaison post UID.

After all I change the default page I have no problem.

CT needs to know what permissions are psoftusr must have to be able to get rid of this error message?
psoftusr is the id used to install the software in the first place.

so far, the file permissions are set correctly in the LDAP directory.

any thoughts...
Thank you
t
CT is about PTools 8.49 and BEA_home is not under PS_Home, it would make everything about the difference in access to this user name?
CT does not see the House under the envsetup (UNIX) BEA? How can they add that, to be part of the env? Maybe this could be one of the reasons...
THX

movements of the user through tablesapce
Hi team,

can move in bulk to the users in the tablespace, but these users have not all objects in their schemas. pls suggest me what the dependencies_ are.

Concerning
Phani Kumar
821131, if the Oracle username does not object then as user names are not associated with storage spaces, except that each user has a default temporay tablespace used to support sort operations and a tablespace of object by default if the user is never given created table privileges / index, and you can change these default values at any time even if the user owns objects. Existing objects are not performed.
- -

As Lordane said, you just need to grant the user the quota required to use a different default tablespace. If the user has tables or indexes, you don't have to move them, but if you want you can use alter table move and alter index rebuild instructions to move most of the tables and indexes. There are some restrictions, such as tables with columns of data type long cannot be moved through alter table move but can be located via export/drop/recreate/import.
- -
HTH - Mark D Powell.
correct view of index in tables and indexes

Edited by: Mark D Powell on June 8, 2011 08:58

Cannot find the user name and password

I tried to download firefox, but when I open the page he asks me a username and password. I tried everything, but insofar as cannot access the internet.

ID it by default user name and password, or am, I sent one, if this is not how to solve this problem?

Download Firefox from this page:
- Firefox 8.0.x: http://www.mozilla.com/en-US/firefox/all.html

Still can not log in to windows XP, cannot change the user name, or start in what either.

locked out of windows xp. happens only with the window prompted for a user name and password. the user name is the name of the previous owner and does not know the password. It is as far as the computer goes. It's not my computer (thank God), but I need to know what to do to help the girl he has. The computer was rebuilt and bought by it. It's a computer dell laptop.

What I can do. I can't connect what either. I can't edit or create a new user name and password for it either. I can't get in any other mode. You have any suggestions?

Hello

Microsoft cannot help you to reset, change or delete passwords. For more information, see the article mentioned below.

Microsoft's strategy concerning lost or forgotten passwords

http://support.Microsoft.com/default.aspx/KB/189126

Cannot find the user profile

After turning on my computer, I try to connect with our user account. an icon appears and says that the user profile is damaged and there could be a security issue. the following icon says that it cannot find the profile of the user and that a temporary profile has been put up. I'm trying to get back access to the user profile because he has sensitive information at the time that must be consulted, photos of family and passwords important programs. I need to know that if there is a way to restore the user profile and retrieve information, the user profile of temporay gives access to certain programs and software, but not the critics.

The following procedure, you should get pretty quickly:

"How to recover damaged Windows XP user profile"
<>http://support.Microsoft.com/kb/555473 >

Damaged profiles are almost always accompanied with alteration of the disc. In addition to the above (or sometimes instead of him), a check disk with the /f or/r option is highly recommended. Note that on a large drive or a drive with a lot of problems this audit can take hours and you cannot use your machine while it is in progress. In addition, there is a small chance that it may be worse, so now is a great time to update your backups.

"How to perform disk error in Windows XP check"
<>http://support.Microsoft.com/kb/315265 >

HTH,
JW

Receive the Error Message "the user profile Service could not connect. Cannot load the user's profile' trying to change the administrator password

Original title: how to change a password for an administrator account that does not work properly?

When I try to change the settings for an account via the Control Panel, I get the admin password, but nothing happens. Close the popup box, but the program I want to open do nothing. I tried to change the password itself on the administrator account, but when I try to log on it, the message that appears is "the user profile Service could not connect. User profile cannot be loaded. "So far, I have not found a way to change the admin password or even that the password works. I tried to remove the program responsible for Parental control in the Task Manager, but it is too safe for me to enter. Is it possible to restart the Parental control or the account administrator if I can't access?

Hello

Were there any changes (hardware or software) to the computer before the show?

Perform the steps in the article mentioned below and see if the problem persists.
http://support.Microsoft.com/kb/947215

Hope that helps.

Error "cannot load the user's profile.

user profiles

Due to a system restore after doing this process when I tried to connect, I get a message "Unable to load the user profile" help please!

Download the ISO on the link provided and make a record of repair time it starts.

Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

When you have changed that, insert the Bootable disk you did in the drive and reboot.

http://www.bleepingcomputer.com/tutorials/tutorial148.html

Link above shows what the process looks like and a manual, it load the repair options.

NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

Read all the info on the website on how to create and use:

http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

It's a very good Vista startup repair disk.

You can do a system restart tool, system, etc it restore.

It is NOT a disc of resettlement.

And the 32-bit is what normally comes on a computer, unless 64-bit.

See you soon.

Mick Murphy - Microsoft partner

In Windows 7, cannot access the user profile get the error "the service user profile Service has no logon.

When you try to access the user profile, get the error message "the service user profile Service has no logon. User profile cannot be loaded. "The new profile tried to go through the steps of profile user fix damaged by ms, but trying to create a new user profile to copy the files from the damaged user profile does not display on my C: drive the users folder (as it should). Anyway to fix the corrupted if user profile profile are available?

Hello

References to Vista also apply to Windows 7.

You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
Mode has no default password (unless someone has changed the password so it should be available).

Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
has been known to cause this problem.

Error message when you log on a Windows Vista-based or Windows 7 using computer a
Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
http://support.Microsoft.com/kb/947215

How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

How to fix error "your user profile was not loaded correctly! You have been connected with a
temporary profile. "in Vista
http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

BE VERY CAREFUL IF YOU USE THIS ONE:

DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

How to enable or disable the built-in Windows 7 Administrator account
http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.html

Use the hidden administrator account to lower your user account APPLY / OK and then lift it to ADMIN.
This allows clear of corruption. Do the same for other accounts if necessary after following the above message.

You can use the hidden - administrator account to make another account as ADMINISTRATOR with password even
(or two with the same password) use a test or fix the other.

You can run the Admin account hidden from the prompt by if necessary.

How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
http://www.SevenForums.com/tutorials/668-system-recovery-options.html

What are the system recovery options in Windows 7?
http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

How to create a Windows 7 system repair disc
http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
always leave to an Admin who is not used except for testing and difficulty account).

Difficulty of a corrupted user profile
http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

I hope this helps.

grant the user
Hello
There is a user permission 'select any table'... but I won't be selected only 'a table' by this user...

grant select any table of XUSER except XTABLE
command is not in Oracle :)

How to do that without revocation "any select permission?

Published by: lucky 18.Eki.2011 14:35
You could create a policy from the CAE on this table. For example, you might have the political function ensure that the table is expressly granted to the user, otherwise will raise an error.

However, this means that SELECT ANY TABLE wouldn't work for anyone (not even DBA), with respect to this table. Think through all the possible implications of which (including exports, statistics, etc.) and make sure you have your bases covered entirely if you go this route.

ARIA: Cannot display the user photo
Hello

I installed app ARIA of apex packaged apps (latest version) under Oracle XE and APEX 3.1.0.

Everything works perfectly, but images of the user is not displayed correctly. The problem is that no image appears in tag:

< img height = "160" alt = "" style = "border: 1px solid black; "src="SCHEMA.image?n=U1.jpg"/ >

I checked and BLOB is correctly loaded into the ARIA_IMAGES table.

I searched through the forum and I checked several things. I've already replaced FLOWS_030100.flow_epg_include_mod_local with:

create or replace
function wwv_flow_epg_include_mod_local)
Procedure_name in varchar2)
return a Boolean value
is
Start
returns the value false; delete this statement when you change this function
Returns true;
--
-Administrator note: the procedure_name input parameter can be in the format:
--
-procedure
-schema.procedure
-package.procedure
-schema.package.procedure
--
-If the input parameter expected is a procedure name, the code IN listing below
-can be modified to list expected procedure names. Otherwise, you must analyze the
-parameter procedure_name and replace the simple code below with the code that will evaluate
-all the cases listed above.
--
If upper (procedure_name) in)
") then"
Return TRUE;
on the other
-return the value FALSE.
Return TRUE;
end if;
end wwv_flow_epg_include_mod_local;

What should I check?

Any help will be appreciated!

Josep
Hello Josep,

Try sql workshop: grant execute on the image to the public.

And see if that helps.

Kind regards
Dimitri
----------------------------------
http://dgielis.blogspot.com/
http://www.apex-evangelists.com/
http://www.apexblogs.info/

Cannot change the user name of the forum

If you go to the user control panel, under the profile box, there is a place where we can make our forum user name - which would be nice because this stuff USER-xyz is ridiculous.

Unfortunately, it does not work because you must put a valid e-mail address in order to change your user name... but you can't because it lacks the text box that you are supposed to type in the e-mail address field.

Can a mod contact someone who can take a look at this?

I too have this problem. I really wish that Sony would like to address this forum some to make it easier to use.

Cannot load the user's profile after putting in the administrators password

I have 3 profiles, me, my son and my cousin, they can get on their profiles but mine won't let me, when I type my password it is said to add the password for administrators who must be me, so I add my password again once and it says can not connect to the user's profile. Ive disappeared on the other accounts to restore the computer but whenever I want to do something, she comes up with my name and to add the directors once again password, so basically used let me not to do anything. Help!

Hi jem500,

· You type the correct password?

Please see the below article mentioned on the Microsoft Policy on lost or forgotten the password.

Microsoft's strategy concerning lost or forgotten passwords

See also:

Keep secure passwords - Microsoft strategy on move the passwords

Cannot grant the privilege on the column the user through role?

Similar Questions

Maybe you are looking for