ARIA: Cannot display the user photo

Similar Questions

• Gets the user cannot display the Web page when she tries to connect to hotmail.

  I try on another pc in which the user of that pc had its hotmail upward.  She took him out and tried to connect to his account and got the cannot display the Web page. She said she crossed and tried all of the suggestions that he gives.  I tried to use Internet Explorer and Firefox.  When the user is at home that she can get hotmail.  There is no settings on our firewall prevents the user to access hotmail.

  Hello, Tiffany Walker,.

  The best place to ask your question of Windows Live is inside Windows Live help forums. Experts specialize in all things, Windows Live, and would be delighted to help you with your questions. Please choose a product below to be redirected to the appropriate community:

  Windows Live Mail

  Windows Live Hotmail

  Windows Live Messenger

  Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums to www.windowslivehelp.com.

• After the removal of the malware "IE cannot display the webpage" - a user only

  After removing various malware with Symantec Endpoint Protection 11, MalwareBytes 1.46 and the Microsoft Malicious Software Removal Tool, the user who received the malware (all detected instances are found on their profile or in the system restore points) can not access all the Web sites with IE 7:

  "IE cannot display the webpage."

  The administrator account, or another standard account have the problem.

  I tried to open IE with 'no Add-ons' when you are connected to the consumer - same result.

  I have reset the Internet Explorer settings on the tab 'Advanced' Internet Explorer (inetcpl.cpl) - same result.

  Once more, the other two users can access Internet without problem.

  The 'user' can access the network otherwise - e-mail, drives mapped to the server, etc...

  One option: delete and re-create the profile of the user in question.

  But before resorting to that, is there another option?

  If I deleted Internet Explorer components in his profile, would they be recreated (correctly)?

  System Restore is not an option, because the troubleshooting procedure indicated that we should delete because they could just bring back the malware. And indeed, the malware has been detected in several snapshots.

  Have you tried to double check the proxy in Internet Explorer?

  Try going to the Internet Option-> setting connection and LAN, check the setting and be sure to correctly configure other users.

  You can also try to contact Symantec Support for more help with this problem.

• HP laptop Pavilion G6 Windows 8 64-bit says cannot display the web page

  Windows Mobile 8 HP Pavilion G6 64-bit it says its connected to network & has internet access but when I try to access it repeat myself"cannot display the webpage" Ive checked all the cables, modem, router and restarted to refresh the signal without success. Called my service providerCox all troubleshooting can be done via phone again once nothing. Cox thought it was the modem so they sent a technician to replace it with a new one and still nothing. However I have no problem with my older Acer laptop, it must be the Hp laptop that has the problem. It just stopped working suddenly. Fine went looking for something and when I came back it just started doing this. What could be wrong? This is not only about a year old and only 1 user "" I use it for school, so I'm very cautious with it never dropped or spilled something on it. I don't even take it. He remains at home on the desktop. At McAfee with all updates except windows 8.1. Help!

  Hi Help_LynnsHP,

  Thank you for visiting the Forums HP's Support and welcome. I read your thread on your HP Pavilion g7-1263nr Notebook and not being is not able to connect to the Internet. You have stated that you have McAfee, which is a firewall protection and or viruses. Have you tried disabling McAfee? Have you tried another browser? Here is a link to show you how do to troubleshoot Internet Explorer for Windows 8. You could try a System Restore.

  System Restore can restore settings that do not allow you to connect to the Internet.

  I hope this helps.

  Thank you.

• When my friend l. a automatic updates for Windows Vista, it can no longer browse the web, well connected (as evidenced by Skype and diagnostics) the message "internet explore cannot display the page" coming up. Is there a way to fix this?

  Explore cannot display the page
  Vista updates
  Restart

  Hello

  Welcome to Microsoft Windows Vista Forums.

  I suggest you follow these steps:

  Method 1: See if you can view another Web page

  To do this, follow these steps:

  Start Internet Explorer.

  In the top of the browser address bar, enter one of the following addresses:

  http://www.Microsoft.com

  http://www.MSN.com

  http://support.Microsoft.com

  If you do not receive a similar error message after entering one of these addresses in the address bar, contact the owner of the Web site where you see the problem. The website is maybe temporarily unavailable or other problems.
   
  If you receive the same error message, go to the next method.

  Method 2: Run the Network Diagnostics tool in Internet Explorer

  To do this, follow these steps:

  Start Internet Explorer, and then try to access the Web page that displays the error message.

  On the page that displays an Internet Explorer error message, click diagnose connection problems . The Network Diagnostics tool will run. When the tool has finished, it will notify if you one of the following results:

  He was unable to find a problem.

  It has detected a problem. In addition, the tool will provide guidance on the next steps to take to resolve the problem.

  Note Users of Internet Explorer 6, click on detect network settings

  Click IP address , and note the IP address. You may have to it for future troubleshooting.

  Follow the steps in the Network Diagnostics tool to fix any connection problems.

  Start Internet Explorer.

  If you receive the same error message, go to the next method.

  Method 3: Use the delete browsing history

  If resetting the modem or the router has not resolved the problem, delete your browsing history might help. Follow these steps to delete your temporary Internet files, history and form data:

  Internet Explore 7

  Start Internet Explorer.

  On the Tools menu, click delete browsing history .

  Select the check box next to Temporary Internet files .

  Select the check box next to the history .

  Select the check box next to form data .

  Select the check box next to Cookies .

  At the bottom of the window, click delete .

  Close Internet Explorer and restart Internet Explorer, and then try to access the Web page.

  Internet Explorer 6

  Start Internet Explorer.

  On the Tools menu, click Internet Options .

  In the Temporary Internet files section, click delete files and then click to select the text box delete all offline content , and then click OK .

  In the history section, click clear history , and then click Yes .

  Close Internet Explorer and restart Internet Explorer, and then try to access the Web page.

  If you receive the same error message, go to the next method.

  Method 4: Use the Internet Explorer (No Add-ons) mode

  To do this, click Start , point to programs , point to Accessories , point to System Tools and then click Internet Explorer (No Add-ons) .

  Note The Internet Explorer (No Add-ons) mode is only available for Internet Explorer 7 and Internet Explorer 8.

  If this resolves the problem, follow these steps to isolate the browser add-on that is causing the problem:

  Click Tools and then click Internet Options .

  Click on the programs tab, and then click Manage Add-ons .

  Click an add-on in the name list, and then click disable .

  Repeat step 3 until you identify the add-on that is causing the problem.

  If the methods in the "Resolution" section General did not resolve your issue, you can try to use the methods in the "Advanced Troubleshooting" section If you are not comfortable with advanced troubleshooting, you can ask for help or contact support. For information about how to contact support, please visit the Microsoft Web site at the following address:

  http://support.Microsoft.com/OAS/default.aspx?PRID=12357

  For more information follow the link below:

  http://support.Microsoft.com/kb/956196

  Hope this information is helpful

  Suresh G

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows XP update error: 0x8024D001, the site has encountered a problem and cannot display the page you are trying to view.

  Original title: Windows XP ~ Windows Update problem.
   
  During three days of solid, and I slept then work, sleep and then working to solve a problem I have with the functionality of Windows XP Windows Update - this is the error message I get constantly

  [Error number: 0x8024D001]

  The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem.

  I installed a new copy of Windows XP on a hard disk nine, installed Service Pack 1, Service Pack 2 and Service Pack 3, installed Internet Explorer 8 installed .NET Framework 2.0 as Microsoft requested, modified popup settings to allow Windows Update page to be free to scan my system for updates, etc... and I even enabled all Active X permissions BUT I still can't Windows Update to allow me to download all updates, patches, etc... Windows Update has generally

  I also turned on automatic updates requirement also BUT no dice - I can't just not update Windows to activate and start as normal, no matter how many times I format the drive and do a fresh install.

  I had to get a new drive hard as my old crashed.

  Now, I have to install Windows XP again but I noticed how old, easy to update somehow has been paralyzed.

  It's as IF Microsoft is crippling of Windows Update to start simple as pie, then now we users HAVE to jump through hoops to get our operating system Windows XP set to day and repeatedly queries Microsoft asks us or install 'FIX IT' service does not work and it is impossible to reach by phone about Microsoft , and the live online help runs into errors when it is installed, so I have to hit the Internet Forum here for advice.

  How, in words simple Windows XP allow Windows Update to run the scan, to download and install the process what it is supposed to do?

  What exactly is missing to allow the screen to show the green bar and scan the notificiation there have updates available?

  What I am doing wrong?

  I really hate to say this, BUT I'm literally at the edge of tears.

  Help!

  Is there a maintenance program master as an "all-in-One rollup patch" that will search the lack of programs, applications, and settings of Windows XP and makes a one-way relay to set everything right and ensure that the programs needed to make Windows Update work are knitted in Windows XP, including all programs missing subprogrammes and to settings then check their self errors or incorrect version but it provides goes off to FIND the RIGHT version of What is needed?

  Or better yet a disc Compilation of master i.e. Final Service Pack 4.0 that contains all fixes known on DVD that would be found in the downloaded Windows Update but rather is purchased for $10.00 that contains each hotfix and update known for Windows XP so that we can manually update Windows XP on the side of the user of the Internet without having to go on the internet?

  You need 3 things to WU work.

  WindowsXP-KB892130-ENU - x 86 .exe

  KB892130

  Windows Genuine Advantage Validation v1.9.42.0

  WindowsXP-KB898461x86 - ENU.exe

  KB898461

  Installs a permanent copy of the Package for Windows Installer

  And and unofficial WUA.

  He's right on obsolete dll of WUA that MS is not updated once sometimes for some unknown reason... even the WU Fix there don't solve it. I ran a few tests in the fall and virtual machine on the same issue yesterday. You must install the unofficial Windows UPDATE agent.
  Windows Update Agent below... MS last isn't the last. Boo Ms.
  Download WindowsUpdateAgent7.6.7600.256 - 257.zip to your desktop (MS does not have the latest version of Windows Update Agent. Only 7.4.7600.243 so make us with this).

  Unzip it, go to the folder and double-click RunMe - MakeInstallWindowsUpdateAgent.bat.

  It will download, MS, the files needed to create the Windows Update Agent 7.6.7600.256/257 and then install it. The files that it contains are 100% Microsoft. He uses just a few third-party tools to make it.

  You will be left with the installer, WindowsUpdateAgent7.6.7600.256 - 257.exe. Keep or delete. Your choice.

  Analysis antivirus for WindowsUpdateAgent7.6.7600.256 - 257.zip

  Information for network administrators about how to obtain the latest Windows Update Agent

  Taken from the newsletter above...
  View
  There is no stand-alone installer for the latest version of the Windows Update Agent (7.6.7600.256)

  EDIT: I forgot to mention. It took 1 hour before the scan finished for me. A guy that I was helping on another forum just let WU scan of the day to the next. When he awoke, the scan had the results. So please be patient.

  "Or better yet a disc Compilation of master i.e. Final Service Pack 4.0 that contains all fixes known on DVD that would be in the downloaded Windows Update, but instead is purchased for $10.00 that contains each hotfix and update known for Windows XP so that we can manually update Windows XP on the side of the user of the Internet without having to go on the internet?

  You can create a CD to date and does not deal with all the hassles during the fresh installation. You need nLite and my script of the UDC. You will only need SP3 when "slipstreaming". No SP1 or SP2.
  

• Lack of space disk or memory, cannot display the requested font. Outlook blurred fonts

  After I've been using Word and Outlook for awhile, I get the following message: there is not enough memory or disk space. Word cannot display the requested font. Once I get this error message, my fonts are truncated in Word and Outlook.

  I am running Windows Vista 64-bit Home Premium with Office 2007. I have 4 GB of RAM, with settings in automatic mode (Windows detect).

  I'm not a power user. I googled and searched Microsoft help, nothing helps.

  My brand new computer becomes almost unusable! Help, please.

  kimlife,
  Thank you for visiting the Microsoft Answers community forum.

  There are a few things that can cause this.  One is a damaged normal.dot template, one is a damaged printer driver, and the other would be a sort of third part add in.  Start with the simplest to try so that replaces the normal.dot template.

  Click Start, click search, and in the search for box, type normal.dot.  There should be a search option you can check "Search hidden files", which is checked.  If it does not, try searching * .dot.  It can be difficult to find because it is a hidden file.  You may have to go into options files and make sure that 'show hidden files' are ticked.  Whenever you find the normal.dot file, rename the old.dot and restart your computer.  Open Word and it will create a new normal.dot template, which is what Word uses as a document is empty by default.

  If this does not work, read this article about a third-party add-in that can cause this problem:
  http://support.Microsoft.com/kb/906899

  Let us know how it works and if you need additional assistance.
  Thank you
  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• RV120W ROUTER/firewall "cannot display the webpage".

  I have a small LAN using a T1 of One Communications line.  Static IP address.

  30 workstations.  Windows 2003 DHCP server.

  Installed new RV-120W firewall router last week replacing an old unit of Netgear.

  Configure VPN tunnel on the unit, have remote access for about 10 users.

  This part works well.  A little slow, but acceptable.

  My question: is internet connectivity on internal LAN in and out.  She's very agitated.

  Upload and download speed has been consistent (~2.5M/sec)

  External Pings see the very minimal loss.

  Users have seem intermittent loss of web streams and corrupt downloads.  web activity 90% is ok, but we continue then getting "cannot display the webpage error."

  NSLOOKUP displays the DNS, but occasssionally "TIMEOUT" occurs.

  I got the provider perform loopback tests and replace WIC on CISCO 1841 router T1, but I still see the behavior.

  I see by reading other forms, that it is an ongoing problem with the routers of RV.

  My settings...

  Public static IP / DNS on the router.

  Reverses the MTU to 1500.  I have adjusted downwards by increment to 1350.

  Windows Server 2003 has RV120W address as the router / gateway.

  T1 to CISCO 1841 ROUTER... to CISCO RV120W... to LAN CISCO SLM248G interrrupteurs (2).

  I do not configure all redirects the port.

  I continue the line tests on my end, but as I said this problem was not existing with Netgear unit.

  Please indicate any change of setting / suggestions.

  Hi Jason et al...

  In my view, the technician are now experiencing a UDP on the Rv120W question.

  The internal discussions on the issue of R & D and development seems to be;

  1. default on RV120W a UDP Flood attack control that limit 25 UDP by customer connections in one case there, IE to a particular instance of time a PC behind the router can establish only 25 UDP Transactions, if we exceed router drops packets UDP.

  2. we have a script that sends dns queries to search at a very high pace that the router deletes the entries in the UDP, in this way, that we accumulate the UDP entry in the router table (IE 25 entries)

  3. once 25 limit is reached, we are unable to resolve DNS queries, in addition to using the script or by using the browser.

  4. in real-world scenarios it could be a PC behind the router and open a website where all the elements on the Web page are related to the different website, if you open this type of Web site, it may have links to over 25 different site and clog the table routers UDP for the PC and the user may not able to solve queries DNS additional and impossible of browse all new Web sites. This inability to browse happens until the UDP entries on the router time dead and are deleted.

  5. this limit of 25 is because of the feature called raw block UDP on the router that is enabled by default.

  6. once we disable the block UDP Flood, router does not check 25 connections limit UDP and dns resolution is continuous, without interruption.

  This is a customers in the area could be to see breaks in the DNS resolutions and browse site failed.

  Some customers talked explicitly about DNS failures.

  Jason I see that you have placed a service call, so I hope that CCORAL who posted August 15 should be helping you.

  So people, if the technician finds the problem not a hardware issue requiring an RMA, the technician will intensify the call for our people of level 2 in the Irvine case, probably CCORAL.  You will get a help to solve this problem.

  The small business support center, should be aware of the problem. Please do not hesitate to show them this announcement, I am ready to discuss with them to get things moving.

  Yet once, if you have not already done, please contact the HWC and place a request for service and keep a copy of this number they give you as a reference (you can need). My apologies for the inconvenience that you all had.

  concerning

  Dave Hornstein

  Small businesses, channel system engineer

  Cisco - Research Triangle Park.  U.S..

  http://www.Cisco.com/en/us/support/tsd_cisco_small_business_support_center_contacts.html

• Windows wil lnot open pictures says windows cannot find the file (photos were recorded he said before that)

  Windows will not open photos says windows cannot find the file (photos have been saved he previously said)

  Thank you

  Hello

  I imagine the inconvenience that you are experiencing and will certainly help you in the right direction to solve the problem. However, I would be grateful if you could answer a few questions to refine the question in order to provide you with better assistance.

  1. Form when you try to open pictures? Is it in Photo Viewer?
  2. What type of files you are trying to open?
  3. You are able to open the photos in the Photos App?
  4. What is the brand and model of the computer?
  5. You did changes to the computer before this problem?

  I suggest you to try the steps below and see if it helps you to solve the problem.

  Method 1: Run the utility to search and index and check.

  a. press the Windows key + X and click on Control Panel.

  b. click on Troubleshooting.

  c. Select display all on the upper left corner.

  d. perform research and solving problems of indexing.

  Method 2: Restart the Windows Search service and check.

  (a) press Windows + R key and type "services.msc" and press ENTER.

  (b) locate the Windows Search service and right-click on it.

  (c) click Properties and check that the start option has been activated.

  Method 3: If the problem persists, I suggest you to run a full scan using the Microsoft Safety Scanner (MSS) to ensure that the computer is virus-free.

  The Microsoft Safety Scanner free is a downloadable security tool that allows analysis at the application and helps remove viruses, spyware and other malicious software. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

   

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

   

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Additional reference:

  Photos app using Windows

  http://Windows.Microsoft.com/en-us/Windows-8/photos-app-FAQ

  Get back to us all the necessary information and the result of the proposed suggestion, we will be happy to help you again.

  Kind regards

• Internet Explore cannot display the page

  Hi all

  I m new to this and I need a little help that one when I connect to a Web page, he says internet explore cannot display the page. Any ideas how I can fix this problem? Be grateful for any help.
  Thank you all.

  First question;
  Haven't you set up the modem or the router correctly?

  Maybe your connection to the ISP (Internet service provider) was not set properly and so you are not able to connect to internet!

  Have you tried to connect to the internet with other computers?

  Reading your post I n t think that there is something wrong with the laptop

• Why teststand cannot display the ASCII character which number up to 128?

  Hi all

  I encountered a problem on an application for ASCII characters, why teststand cannot display the ASCII character which number up to 128?

  For example: an expression Local.xx = Chr (164).

  XX--> chain, can't do the correct string.

  An idea for this?

  OS: WinXP, SP1 Teststand2012.

  Thank you very much.

  TestStand uses encodings multibyte code page, that you have defined for the operating system-based. If you are using a code page that requires multibyte characters, you should also make sure that you have the Options of Station-> location-> parameter Regcognize multi-byte characters is enabled.

  On Windows 7, at least, the code page of the operating system setting is located in the control panel "Region and language" in the "Administration" tab where it says "language for non-Unicode programs".

  Hope this helps,

  -Doug

• Error - because of unidentified problem, Windows cannot display the firewall settings

  Original title: Firewall Windows are not accessible to stop?

  Recently installed MSE.  Now, I can't launch Samsung Allshare to view files on the Samsung TV.  Firewall Windows is not accessible to stop temporarily so that Allshare can run.  All that is shown is "Because of problem not identified, Windows cannot display the firewall settings."  It seems that MSE has hidden and I can't determine how to communicate with them without going through the process of uninstalling and re-installing.

  Hello

  1 Windows operating system you are using?

  2. when exactly you get the error message?

  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up the registry, see the link:

  Back up the registry

  http://support.Microsoft.com/kb/322756

  See the article and check if that helps:

  You cannot start the Windows Firewall service in Windows XP SP2

  http://support.Microsoft.com/kb/920074

  If the problem is not resolved, please provide more information to help you best.

• Cannot display the error using Netflix page in Windows Media Center

  Hello I use Windows Vista Home Premium and Windows Media Center. I watched titles on Netflix in the past successfully in Windows Media Center, but today I get this error when I click to play a title:

  Cannot display the page. Windows Media Center cannot open the page.  Contact technical support for the program.

  And so here I am.

  I see all of the titles on my queue when I click on the Netflix icon, so obviously I am connected and connect, but cannot actually look at all the titles.

  Thanks for your help

  What is the error you get when you try to watch Netflix from the browser?
  What browser do you use?

  Go to start, all programs, Microsoft Silverlight and open Microsoft Silverlight.

  The tab of the Configuration window About, let us know which Version you have installed.
  Go to the Read tab, and then make sure that the enabled for playback of content protected.
  Then go to the Application Storage tab, select the Netflix web site from the list and then click on Remove to remove it. There may be more than one listed Netflix website, for each of them.

  After the changes, try once again, Netflix in Media Center and browser.

  You can also try reinstalling Silverlight by going to start, Control Panel, uninstall a program, select Microsoft Silverlight, and then click on uninstall and cross the guests. After uninstalling to joinhttp://www.microsoft.com/getsilverlight/Get-Started/Install/Default.aspx and reinstall Silverlight.

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error code: 0X80072EFF (cannot display the Web page)

  My pc is no longer updates windows, nor do an update error code manual 0x80072eff that my pc is proteceted by full protection of Virgin Media and analysis of viruses etc. See the there are no problem I get message internet Explorer cannot display this webpage.  When I try to update via the web site address microst update I get the following message:

  [Error number: 0x80072EFF]

  The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem.

  George,

  0x80072EFF = ERROR_INTERNET_CONNECTION_Reset

  Reading * carefully *-not just browse the page and start following the steps.

  You may encounter temporary connection Errors when you use Windows Update

  -or-

  Microsoft Update to install updates:

  http://support.Microsoft.com/kb/836941

• error code: 0 x 80070002: MS updates__The site has encountered a problem and cannot display the page you are trying to view. The options provided below might help you solve the problem

  The website has encountered a problem and cannot display the page you are trying to view. The options provided below might help you solve the problem

  Hello

  Look in Control Panel - updates of Windows to see what is the KB and post it here. You can indeed
  There no need and do a right click on it and HIDE it. Let us know what is the update, so that we can
  help advise.

  Also, if you don't need it you can try to download it here.

  Microsoft Download Center - research on KBxxxxxx the number of update for anchor xxxxxx
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to the place where your put it - click on - RUN as ADMINISTRATOR

  If you need to fix the error:

  Error message when you use the Windows Update Web site or the Microsoft Update Web site to install updates: "0 x 80070002.
  http://support.Microsoft.com/kb/956698

  Windows Update Error 80070002http://windowshelp.microsoft.com/Windows/en-us/help/c5f4d9e0-3eb6-426b-8118-0cedf489a75f1033.mspx#EJH

  Or - these two (above and below must be the same)

  Windows Update Error 80070002
  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-Error-80070002

  Fix Error 80070002 when using Windows Update in Vista
  http://www.mydigitallife.info/2007/12/21/fix-Error-80070002-when-using-Windows-Update-in-Vista/
  Error Code 0 × 80070002 during Windows Vista SP1 Setup Install - SP2 might have similar problem
  http://www.tipandtrick.NET/2008/error-code-0x80070002-during-Windows-Vista-SP1-Setup-install/

  You receive an error '0 x 80070002' or '0 x 80070003' code after you download an update from Windows Update, Microsoft Update or Windows Server Update Services
  http://support.Microsoft.com/kb/910336

  Error message when you use the Windows Update Web site or the Microsoft Update Web site to install updates: "0 x 80070002.
  http://support.Microsoft.com/kb/956698

  ----------------------------------------------------

  Then run this:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------

  If necessary, you can get free reports of incidents:

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.