Cannot hear the sound of the TV after connecting via a HDMI cable
Original title: sound on tv
I was able to hook the hdmi cable to the computer laptop & tv and watch movies on tv. Now, for some reason I can't hear the sound on the tv more, the sound from the laptop only. How can I fix?
Hello Monica,.
-What operating system is installed on the computer?
If you have installed Windows 7, you can read these articles and check if that helps.
Connect your computer to a TV: http://windows.microsoft.com/en-us/windows7/connect-your-computer-to-a-tv
Sound cards: frequently asked questions: http://windows.microsoft.com/en-us/windows7/sound-cards-frequently-asked-questions
Thank you.
Tags: Windows
Similar Questions
-
Help, please! Cannot access the web after connected to the VPN
Hello
I'm a newbie on Cisco products. I configured a Cisco ASA 5505 with VPN firewall. However, I can't access the web after I connected to the remote IPSec VPN. I also cannot connect to the bands using the intellectual property. But I can connect to the internal servers in the office with no problems.
Here is my setup, can someone help please? Thank you very much
ASA Version 8.2 (5)
!
host name asa
xxxxxxxxx.com domain name
enable the encrypted password xxxxxxxxxxx
xxxxxxxxxxx encrypted passwd
names of
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
interface Vlan1
nameif inside
security-level 100
IP 192.168.1.1 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
IP address dhcp setroute
!
passive FTP mode
area of zone clock - 8 schedule
clock summer-time recurring PDT 1 Sun Apr 02:00 last Sun Oct 02:00
DNS lookup field inside
DNS server-group DefaultDNS
Server name 107.204.233.222
name-server 192.168.1.3
xxxxxxxxx.com domain name
inside_nat0_outbound list of allowed ip extended access all 192.168.1.96 255.255.255.240
pager lines 24
Enable logging
asdm of logging of information
Within 1500 MTU
Outside 1500 MTU
IP local pool sc-192.168.1.100 - 192.168.1.110 mask 255.255.255.0
ICMP unreachable rate-limit 1 burst-size 1
don't allow no asdm history
ARP timeout 14400
Global 1 interface (outside)
NAT (inside) 0-list of access inside_nat0_outbound
NAT (inside) 1 192.168.1.0 255.255.255.0
NAT (inside) 1 0.0.0.0 0.0.0.0
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
the ssh LOCAL console AAA authentication
Enable http server
http 192.168.1.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set
Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
outside_map interface card crypto outside
Crypto ca trustpoint _SmartCallHome_ServerCA
Configure CRL
crypto ISAKMP allow outside
crypto ISAKMP policy 10
preshared authentication
3des encryption
sha hash
Group 2
life 86400
Telnet timeout 5
SSH 192.168.1.0 255.255.255.0 inside
SSH timeout 5
Console timeout 0
interface ID client DHCP-client to the outside
dhcpd outside auto_config
!
dhcpd address 192.168.1.5 - 192.168.1.36 inside
dhcpd dns 107.204.233.222 inside the 192.168.1.3 interface
dhcpd allow inside
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
WebVPN
internal strategy group xxxxxxxx-sc
attributes of xxxxxxxx-sc group policy
value of 107.204.233.222 DNS server 192.168.1.3
Protocol-tunnel-VPN IPSec
XXXXXXXXXX.com value by default-field
xxxxx xxxxxxxxxxx encrypted password username
Strategy Group-VPN-xxxxxxxx-sc
remote access to tunnel-group xxxxxxxx-sc type
attributes global-tunnel-group xxxxxxxx-sc
address sc-pool pool
Group Policy - by default-xxxxxxxx-sc
tunnel-group xxxxxxxx-sc ipsec-attributes
pre-shared key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
!
global service-policy global_policy
context of prompt hostname
call-home service
anonymous reporting remote call
call-home
contact-email-addr [email protected] / * /
Profile of CiscoTAC-1
http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
email address of destination [email protected] / * /
destination-mode http transport
Subscribe to alert-group diagnosis
Subscribe to alert-group environment
Subscribe to alert-group monthly periodic inventory
monthly periodicals to subscribe to alert-group configuration
daily periodic subscribe to alert-group telemetry
Cryptochecksum:5c1c99b09fb26fcc36a8bf7206af8e02
: end
Hello
Try adding the following commands
permit same-security-traffic intra-interface
NAT (outside) 1 192.168.1.96 255.255.255.240
Is there are always problems with VPN then I would maybe change VPN pool to anything other than something that comes into conflict with the LAN.
In this case, these configurations should do the trick
In order from top to bottom, they would do the following things
- First remove the pool VPN and VPN configurations
- Then remove the VPN pool
- Remake of the VPN Pool with different network
- Reattach the VPN pool for VPN configurations
- Configure NAT0 to the new cluster of VPN
- Remove the old line of the ACL of the configuration of NAT0
attributes global-tunnel-group xxxxxxxx-sc
no address-sc-swimming pool
no ip local pool sc 192.168.1.100 - 192.168.1.110 mask 255.255.255.0
IP local pool sc-192.168.2.10 - 192.168.2.254 mask 255.255.255.0
attributes global-tunnel-group xxxxxxxx-sc
address sc-pool pool
inside_nat0_outbound to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.2.0 255.255.255.0
no access list inside_nat0_outbound extended permits all ip 192.168.1.96 255.255.255.240
Of course you also have the NAT configuration for VPN pools new Internet traffic
NAT (outside) 1 192.168.2.0 255.255.255.0
Please rate if the information has been useful if this resolved the issue as mark responded.
-Jouni
-
Re: Want to HP dv7 - no sound on the TV when it is connected via a HDMI cable
Hello.
I would also like to ask for help because I'm faced with the same question.
what I'm trying to get a sound with HDMI, it will not work...
Delfim João
Hi @Delfim ,
Thank you to visit the Support Forums HP and welcome and thank you for all the information about what you tried. I looked in your question about your computer laptop dv7 HP ENVY and the problems of sound with an HDMI cable connected.
Try this fix.
1. a click right icon "speaker" (right)
2. Select playback device
3. click right speakers
4 activate and as default
5. click apply/OKThis is a general document on the resolution of the problems with the HDMI connection.
With the HDMI cable you have restarted the laptop?
Have you tried another cable?
Hope it will be useful.
Thank you.
-
Cannot conect Dell Inspiron Samsung TV via an HDMI cable?
Can not connect my new laptop Dell Inspiron with my Samsung TV via an HDMI cable? I get only sound but no video. I tried different screen resolutions, but it seems that none can work. Can someone help me on this? Thank you. Vlatko
Hi Patrick,
According to the description, it seems that you are having problems with the video display after connection with a HDMI cable. Correct me if I misunderstood the question.
I suggest you to see the links and check if it helps.
Connect your computer to a TV
http://Windows.Microsoft.com/en-us/Windows7/connect-your-computer-to-a-TV
HDTV: Frequently asked questions
http://Windows.Microsoft.com/en-us/Windows7/HDTV-frequently-asked-questions
I hope it helps. If you have problems in the future, please let us know. We will be happy to help you.
-
Cannot hear the sound of radio stations online
I have a laptop Compaq Presario CQ61 running Windows Vista 32 bit. Recently I experienced problems of listening to online radio stations that I can no longer hear live broadcasts. In addition, I cannot hear any sound when you watch programmes broadcast by the BBC iPlayer
I ran the Microsoft 'Fix - It' for the sound with the result being that there is no apparent problem. I can hear all the usual pings and dings related to Windows and Windows Media Player play my downloaded music.
Ideas/suggestions on what could be the cause of this problem or a proper fix would be greatly appreciated
Try to put the URL of your music website in the whitelist your anti-banner
or an activeX plug-in is missing for your browser
-
cannot reactivate the CS2 after the hard disk crash - site says I need to talk with adobe (activation can be done online) but the customer support page loop all around - help/activate (since the opening page of CS2) also not going anywhere... it is a pc - thank you!
message says 'unavailable activation server this time... error code 24:24.
Error: "Activation Server is not available. CS2, Acrobat 7, pass a hearing 3
-
Desktop speakers work, but cannot hear the music or videos on you tube
Desktop speakers work, but cannot hear the music or videos on you tube of my speakers
Tommy, thank you very much for your detailed answer. As you will see below, it has been fixed so simply!
Ah - so basically the same thing that fixed the issue of the original poster as well?
-
I downloaded After Effects for 30 days, and when I want to send this message appears "you cannot open the"Adobe After Effects CC 'application because' it is damaged or incomplete. (in fact, I speak Spanish, I just translated it...)
I have OS X El Capitan, maybe that's the problem? How can I solve this problem? Help! Thank youFirst, see if the update to the fixed bug Mac 10.11.1 will help you
-an exchange of views of 10.11.1 https://forums.adobe.com/thread/1986008
He has problems with Mac 10.11 El Capitan... which is perhaps one of them
See answer #5 in https://forums.adobe.com/thread/1965850 for several solution links
-the first link that the answer is a possible solution to install problems
-There is also a link on the video display problems in Premiere Pro
- and many other programs... MORE Microsoft Office also has problems
-
Z580 help: connect to the TV via a HDMI cable
I recently had my father the IdeaPad Z580. It is really eager to stream its videos and watch them on TV. I connected it today via a HDMI cable and got really excited when the screen was reproduced on the TV... but then, when I clicked on internet Explorer tile, I got the following error message:
This application cannot open
The screen resolution is too low for this application to run.
Change your screen resolutionSeems simple enough... but really did not have a clue what to do! Doesn't help that I'm a complete newbie to Windows 8!
I'd be really grateful if someone here would be able to help / tell me what to do! ^^
Thanks in advance!
All of a sudden it works without enaything. In fact, I just do a windows 8.1 update.
-
Is it possible to use the Remote app with the Apple TV connected via ethernet and iPhone via WiFi? When I try this Apple TV does not appear in the list of devices on my iPhone.
Yes, I'm doing exactly this with the same put in place.
If the problem persists the next relative to the following articles might help you.
-
I have two printers installed on my laptop, only appears. The Epson Workforce 600 is connected via a usb cable, the other is a wireless network. I reinstalled the software of the printer (Epson) and it shows in printers and devices, but it is not the list when I go to print something. When I select "Find a printer", it gives me a list of computer icons.
Hello
Check with Epson support, their documentatiion online and drivers. As it's Epson OEM
responsible for the proper functioning of the printer and their drivers provided.Good luck, you need to update or reinstall the latest driver.
Epson - Support us.
http://www.Epson.com/cgi-bin/store/support/SupportIndex.jsp?BV_UseBVCookie=YesEpson - support from Europe
http://www.Epson.co.UK/support=============================================
The main issue is probably the drivers, but these can help:
Add or remove a printer
http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printerSolve printer problems
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problemsOpen the printer Troubleshooter
http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-TroubleshooterFind the manufacturer's Web site
http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-websiteFind and install printer drivers in Windows 7
http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-driversI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
Video recorded but cannot hear the sound
Hello
I have a new Pact of Z3 and just recorded my first video. When reading, I can't hear the sound, but when transferred to the PC the sound is OK.
I know that I have an option turned on/off somewhere, but who is he? any ideas?
Separately, but perhaps related, I have an icon on the notification bar that could be an ear with a diagonal line through it and a small T in the lower corner of the HR. I can't find it in the manual. Yet once, no matter what IDE?
Settings > call settings > hearing aids > uncheck
-
cannot access the internet after upgrading to firefox 30.0 on windows 7
After the upgrade to firefox 30.0 on windows 7, cannot access the internet. FF 30.0 works OK under Vista
Sometimes it's because of your security software thinking that the upgrade may not be legitimate. You can consult this article: problems connecting to websites after Firefox update.
-
9.1 Safari cannot open the page after el capitan 10.11.4 updated updated
have an imac (retina 5 k, 27 ", end of 2014)
4 GHz of processor intel core i7
8 GB 1600 Mhz DDR3
1 TB of flash storage
running Safari 9.1 (11601.5.17.1)
Safari opens but does not open the page - get - Safari cannot open the page - safari can't open the page because the server dropped the connection unexpectedly.
Journal of the console after repeated attempts-
appreciated all help to solve them.
Go step by step and test.
1. turn off the power to the router. Unplug it from the wall. Wait a while.
Plug it in, back to the wall. Turn on the router. Wait for all lights are light up properly. It will take a while.
Restart the computer.
Boot mode safe.
https://support.Apple.com/kb/PH18760?locale=en_US
2 remove Caches.db
Close all windows and close all applications.
Hold down the 'option' key, then click on the "Go" menu in the Finder menu bar.
Select 'Library' in the menu dropdown.
Library > Caches > com.apple.Safari > Caches.db
Right-click on the Caches.db file and select "move to trash".
Close the windows.
Restart and restart Safari.
3 empty Caches
Safari > Preferences > advanced
Tick the box "Show develop menu in menu bar."
Develop menu will appear in the Safari menu bar.
Click on develop and select 'Empty cache' in the menu dropdown.
4. remove the Cookies
Safari > Preferences > privacy > Cookies and other data from the website:
Click on the button "Details".
Delete all cookies except those from Apple, your internet service provider and the banks.
5 Disable Extensions and test them.
Safari > Preferences > Extensions
Uncheck 'Enable the Extension' and test.
Enable the Extensions one by one and test.
To uninstall any extension, select it and click the "Uninstall" button
-
Cannot hear the songs on computer in iTunes
10 64-bit Windows
iTunes 14
I have a new computer (that I have authorized) and I can't hear playback songs in iTunes. both with a headset or a bluetooth speaker. I then hear 'system sounds' in iTunes, but, again, not music. The iTunes volume control is functional and completely turned upward, as well as the icon for the audio control device in Windows. I am able to hear the music in other applications (e.g. YouTube). Any advice or assistance would be appreciated. Thank you very much.
Try to use Ctrl + B to activate so hidden menu bar, and then use Edit > Preferences > reading and look at the entry for Play Audio to help. This should normally be set to Sound live or Session Windows Audio. Change to the other setting can help.
TT2
Maybe you are looking for
-
Relationship between the samples through the second rate and sampling
I was wondering if someone could clarify the relationship between the samples through second rate and sampling. I have USB6008 and USB6363 of the tips that I work with in Measurement Studio. For the nec USB6008 entry differential (up to four channels
-
Adding a node of additional output to a VI
Hi all I put in work of a fuzzy controller using the PID and the tools of control systems. However the default controller VI blur does not as its outputs a table of rules firing. Double click on Controller.vi Fuzzy shows its block diagram, and you ca
-
(Redirected) Disk drive will not eject on Alienware M14x
Hi I discovered recently that my hard disc eject not the current game in there, I did also tech support video and there is nothing I need to solve this problem I need to install a game that requires me to change disks. Help would be appreciated
-
I need to attack a Cisco switch on my network
Hi all I came in a new acquisition of site. The site bought a Cisco 2960 switch from a contractor and paid him to install a few years ago. When the site came under our ownership, I asked them to get the login information from the contractor for the