Re: Want to HP dv7 - no sound on the TV when it is connected via a HDMI cable

Similar Questions

• Cannot hear the sound of the TV after connecting via a HDMI cable

  Original title: sound on tv

  I was able to hook the hdmi cable to the computer laptop & tv and watch movies on tv. Now, for some reason I can't hear the sound on the tv more, the sound from the laptop only.  How can I fix?

  Hello Monica,.

  -What operating system is installed on the computer?

  If you have installed Windows 7, you can read these articles and check if that helps.

  Connect your computer to a TV: http://windows.microsoft.com/en-us/windows7/connect-your-computer-to-a-tv

  Sound cards: frequently asked questions: http://windows.microsoft.com/en-us/windows7/sound-cards-frequently-asked-questions

  Thank you.

• No sound from the Clip when it is connected to the car charger and car s in the

  I just got a car charger for my 8 GB Clip. I have the Clip connected to the connector of the car aux in, and it plays beautifully this way.

  However, when I connect the car charger, which is a fact by Motorola for a mobile phone, the sound of the Clip completely stops.  There is no sound at all.

  Even if I barely touch the metal of the car charger USB plug to the USB port of the clamp, the sound cuts.

  A ground loop isolator would correct this problem? The comments that I have read of these say all that they helped with motor and alternator noise, but I don't have that.  I have no sound at all, even if the Clip is loaded and he continues to play according to the display of the item.

  I checked the car charger works well because I have a box of jump with a record of 12 VDC (just like in the car).  The cool Clip and plays with a helmet with the Motorola car charger in this configuration very well.

  Any ideas what is wrong and how to fix it?

  Thanks in advance.

  Just for this follow-up, the ground loop isolator completely fixed the problem I had with the sound cutting on my video in the car.

  The one I chose was the PAC SNI-1/3.5 RCA noise filter.  He goes online with 3.5 mm cable to the and has a socket on one end and a plug on the other.  It would have been cool if he had just had two male connectors, because then I could have plugged one side in the Clip and the other in the input of the car Jack.

  There is no significant deterioration in the sound, and now I can load the Clip while listening.

• I have no sound on the tv when it is connected to my toshiba satellite

  help cannot get sound on my tv from the pc I use hdmi cable sound is on the pc, no tv

  Try to set the digital audio playback device:

  Right click on the speaker bottom-right icon, corner of taskbar (system tray) select "playback devices". Click on Audio Digital that may be present, and then click the button "set as default". Usually the default value is set with the speakers.

  Connect your computer to a TV
  http://Windows.Microsoft.com/en-in/Windows-Vista/connect-your-computer-to-a-TV

• Sound does not work when it is connected to the TV with HDMI

  I have a HP Pavilion Notebook PC, DV7 - 6813EV, running windows 7 Home Premium 64-bit SP1. My problem is that I have no sound when connected to my TV HDMI connection and press. Please could someone help me? Thanks in advance

  Hello gematz,

  The sound does not work when it is connected to the TV via HDMI.

  Go to start.

  Type sound.

  Click sound

  On the playback tab, click with the right button on the HDMI interface, and then select set as default device.

  If you do not see the HDMI, right click and select devices see off, then set as default.

  I would like to know how everything goes.

• I use Director and I got about 100 picture in my project and I want to bring up more time on the screen when reading it.

  I use Director and I got about 100 picture in my project and I want to bring up more time on the screen when reading it. I know you can do induvdually but I was wondering if there was a way to select all and then make the longer time for each of them. Help, please!

  original title: NEED HELP Please REPLY as soon as POSSIBLE. Windows movie maker question

  Hello

  My friend John Papa - MVP - is the expert on Windows Movie Maker.

  PapaJohn.org
  http://Papajohn.org/

  PapaJohn - online tutorials
  http://www.Papajohn.org/mm2-online-tutorials.html

  Windows Movie Maker Tutorials - check the sounds of the addition in the left menu and others on the
  main screen.
  http://www.windowsmoviemakers.NET/tutorials/

  Windows Live Movie Maker help & how-to and Forums are good sources of information:

  Windows Essential - Movie Maker help
  http://Windows.Microsoft.com/en-us/Windows-Live/Essentials-Help-Center?T1=T3

  Answers - Windows Essentials - Microsoft Windows Movie Maker Forums
  http://answers.Microsoft.com/en-us/windowslive/Forum/MovieMaker?tab=threads
  ====================

  These might help:

  Getting started with Windows Movie Maker

  Import video, photos and audio on Windows Movie Maker

  Import video from a videotape

  Get a movie in Windows Movie Maker

  Make a movie quickly in Windows Movie Maker (AutoMovie)

  Publish a movie in Windows Movie Maker

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• When don't my tv with hdmi cable connection no sound or image since the upgrade to w8 to see my tv but not

  HP G60 100EM

  W8 64bits

  NVIDIA

  No picture or sound on TV when connected by an hdmi cable.

  in nvidia control is see my tv.

  also coprocessor not installed eooro driver code 28

  Well,.

  1. The laptop is not supported by Windows 8. I have no doubt is the reason that you are experiencing this issue.

  You can follow this DOCUMENT for information about the HDMI connection.

  THX

• HP laptop G72: no sound on the tv when streaming movies, videos, etc.

  Audio works on my HP laptop, but when I stream from the internet there is no sound coming through my TV with HDMI connection.

  Hi @7delnann7,.

  Thank you for your query.

  I understand that after upgrading to Windows 10 you don't have audio when the flow from the Internet to your TV via an HDMI connection.

  You did all your Windows updates?

  Have you ran the Windows troubleshooting tool?

  Here is a link for laptops HP - troubleshooting HDMI screen and sound Issues with steps to try.

  If you like get help please provide your exact model of laptop G72.

  
  

  Thank you for your participation in the Forums of HP! We want to help you as well as others who may encounter a similar problem as you. Please consider tagging the post in order to solve your problem as "accept as Solution" to help other members of the community!

  To show recognition for my efforts please click the Thumbs Up below.

  Good luck!

• Re: Satellite C660: Sound through the speakers when the headset is connected.

  I have a brand new 258 C660, running on Windows 7.
  Playback device: Realtek High Definition Audio

  * Whenever I have headphones or external speakers connected via the 3.5 mm jack plug, sound still comes through the built-in distant.*

  Here's what's happened so far:

  When I plugged the external speakers were first, I was asked to choose if I had plugged a headphone or speakers. I selected "speakers" and then also, perhaps foolishly, choose "do not ask me again".
  Now, I can't to this selection again.

  Here's what I've tried so far:
  -Reboot
  -Try different headphones, try them on other devices
  -System Restore (not, for some reason any)
  -all settings via the sound control panel

  Basically, I think that I am looking for a way to disable the internal ATAPI Jack when the external Jack 3.5 mm is used.

  I am aware, there was a similar thread some time ago, but the problem may be slightly different and perhaps due to the fact that I chose "do not ask me again". At least, I hope this isn't a hardware problem...
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=241409𺼁

  Thanks in advance for any advice

  Don t think there s hardware issue.

  Try this:
  Connect the headphones.
  Go to the control panel-> Sound-> playback tab
  Here, you should see the speakers and headphones.
  Now choose the headphones and set this default value.

  This help you?

• No sound from the headset when using hdmi

  I use the HDMI for a big screen, but with this use, the headphone is turned off. I need to be able to use the HDMI for the monitor and the headphone jack for sound.

  If you have no sound with the plug HDMI is connected, it means that your current sound settings are set for audio must be set to the HDMI output. Go to sound settings and pass parameters of HDMI output for speakers.

  Open Sound by clicking on the Start button, and then click Control Panel. In the search box, type sound, and then click sound

  In the Audio window, select the playback tab
  Replace the default value with the green mark check speakers with HDMI connected.

• G6-1b70us Pavilion. Picture but no sound from the tv when you use HDMI. Worked without problem.

  I have a pavilion g6-1b70us I'm trying to connect my TV with an hdmi cable.  I get a picture but no sound.  Previously, this worked without problems.  When I shoot to the top of my reading of the sound settings, the only options are speakers and the headphones.  When I shoot to the top of my devices, the Samsung TV is there, but it is described as a "generic monitor" (thinking it was weird).  I have uninstalled and reinstalled my intel graphics driver and IDC audio driver but still no sound through TV.  Also, I will mention that in sub control panel > sounds and devices there is a link to the SRS Premium Sound technology.  As you can see in the image below, the Samsung device is, but it is greyed out and cannot be selected. Can someone please?

  Well in case anyone is interested I have solved the problem (only took me 12 hours to understand, lol).  Apparently, even if the Samsung TV did not appear in the audio options, you can still right click in the empty box and a toggle option will appear.

• How to turn on the sound for the preview when editing in AE?

  I understand how to press 0 on the numbers pad, but it starts at the beginning of the project... I would like to first of all audio playback to the point where I'm editing, I was reluctant to change the work area in the region, I'm hearing the sound because that repeatedly threw me off the coast...

  Although I am on the learning curve, I have yet to find an option that simply allow me to hear sound whenever I saw... Please help.

  Thanks in advance

  You can press. the sound on the right pad.

  In addition, in your RAM Preview options, you can set to get a glimpse of the present, rather than the beginning of the work area. Learn more about this on this page.

• HP Pavilion DV7: No sound on the computer or the external speakers

  Hello

  My computer or external speakers have audio.  While trying to determine what could be the problem, I think

  I deleted by mistake the audio driver.   When I was troubleshooting in Control Panel under the sound

  category I selected the button disable without realizing it would actually delete the driver software.

  Is there a way to retrieve that or I will have to buy new drivers for my computer?  I s there a way of

  get a free download on the sound card drivers or is there any reasonable out there that you know?  I have not a

  warranty on my computer.

  Thank you for any advice or help.

  Hello

  Yes, that's correct.

  Kind regards

  DP - K

• Microsoft LifeChat LX 3000 stops the sound from the speakers when connected

  Hello

  I bought a USB Microsoft LifeChat LX 3000 headset, and when it is plugged into my USB port, no sound is heard from the speakers.

  When I disconect the speakers rund LX 3000 perfectly.

  Someone knows how to fix this problem, please

  I wanted to check if Microsoft LifeChat LX 3000 has all the entries in this section and if it has settings to enable or disable speakers when it is installed.  It is obviously the installer to work this way by default--I know not how to change the value by default if there is no entry in the audio section.

  Try to download updated drivers for your sound card - she is in the speakers and contolling the LifeChat for an upgrade can provide options that are not currently available and you should be able to control if both can work at the same time.  While you're there, download and reinstall the updated drivers LifeChat as well.

  Here is a link to the Microsoft Support - I don't know if it will be free or not (I can't go past the area enter the product id field). https://support.microsoft.com/oas/default.aspx?gprid=12368&st=1&wfxredirect=1.  If free (I'm not sure I want to pay for support) and then explain the problem and they may be able to tell an easy solution that we have lost.

  Here is a link to the product documentation that can explain what is happening and why.  Maybe it's just the way they are designed to work. http://www.microsoft.com/hardware/documentation/default.aspx?type=LifeChat&sku=JUG-00001.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• sound on laptop lost when it is connected to the docking station

  laptop connected to the docking station and audio comes through the audio connection [headphones] on docking station.  No sound on computer

  Hello

  ·         If it works well before? If so, remember to do recent changes on the computer before this problem?

  When you connect the laptop to the docking station, the default audio output device will automatically change to the docking station. Similarly, in the case of plug in the headphones on laptop. I suggest you to check if the audio device by default from computer speakers is properly defined. Follow these steps:

  a. click the Start button, select Control Panel, click hardware and soundand then click sound.

  b. click the read tab make sure that the correct default audio device is selected. (For most users, the default audio device is pregnant.)

  c. If your default device is not set to the right audio device, on the read tab, select the appropriate device, click Properties, click the Advanced tab and make sure that the default Format is set to the value you expect. When you are finished, click OK.

  d. on the read tab, select the playback device, click set upand make sure that the configurations are set correctly.

  If the sound settings are set correctly and that your speakers are already set as default device, go to "Check if an audio driver is installed" now.

  e. Select the audio device you want as audio device by default, and then click set as default.

  f. click OK to save your settings.

  For your reference, follow the steps described in the following link:

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems