Cannot initialize the Satellite L300

Similar Questions

• Webcam cannot initialize the Satellite P850

  Running my P850 and says webcam - webcam failed to initialize

  I even made a complete system factory restore.

  Can anyone help as to why this has happened.
  He worked a week ago, but now the guard saying webcam could not be initialized.

  Considers that Brad.

  Hello

  Try to install the driver for the webcam.
  First go to Device Manager and uninstall the driver of the webcam.
  Then download the latest driver/software of the webcam of the Toshiba driver page.
  Unzip the package and install again.

  Good luck

• During installation, download "error!" Cannot initialize the plug-ins directory.

  Has started having problems when opening Firefox and trying to make Firefox the default browser. Windows 7 update and update AVG virus scan clean, updated MalwareBytes and scan clean. Troubleshooting finally brought me to uninstall and try for a clean install... normal Windows 7 uninstall process successful. Is that Firefox folder in "Program Files" has been deleted. Download "DownloadApp_1_7_5_198_Setup" (29 442 KB) of the Mozilla Web site and run... "error!" Cannot initialize the plug-ins directory. Please try again later. »

  http://www.bleepingcomputer.com/forum.../error-cant-initialize-plug-ins-directory-please-try-again-later/
  What are the permissions on your Temp folder?

  Look to see if there are a few cases on this point, brb.

• How do I not what SATA driver do I need for the Satellite L300 - 03C

  How do I not what SATA driver do I need for the Satellite L300 - 03C so I can make nlite

  Hello

  Your laptop seems to be a Satellite L300 - 03C PSLB8C-03C01X.
  As already indicated on your first visit to thread the Toshiba Canada page and choose this model of laptop on the driver page.
  http://209.167.114.38/support/download/ln_bymodel.asp

  Then download the Intel Matrix Storage Manager (SATA) - image of floppy drive. It of for Vista, but the files in this package should work with Win XP too.
  Include these files using nLite to create the new disk Win XP that contains SATA drivers.

  Finally use this disk to start.

• Why the Satellite L300 laptop screen stays white?

  Why the Satellite L300 laptop screen stays white?

  Hello, I have a Toshiba Satellite L300-29U over purchase, turn when he was first an hour about it looks a whole without problems, then the screen was blank. Feed again in a couple of times more hours after rest and passes him still takes some time to operate.

  What is your recommendation?

  Thank you for your response.

  Post edited by: Sams

  Hello

  Why?
  Who knows what have you that your screen is white?
  My screen is not white it shows everything correctly.

  The same white screen will appear on the external monitor?
  If so, then this problem may be related to faulty graphics card, if no, your laptop computer s display can be defective

• Windows cannot initialize the device of this hardware driver. (Code 37)

  Windows cannot initialize the device of this hardware driver. (Code 37)
  There is no upper or lower filters in reg.
  external device does also not same massage (Windows cannot initialize the device of this hardware driver. (Code 37))
  How do I solve this problem

  Hello Rajendra Aagarwal,

  Thank you to contact the community Microsoft and we will be happy to help you with your concern.

  According to the description, it looks that you are having problems with the error message Windows cannot initialize the device of this hardware driver. (Code 37).

  Method 1: Run the Fixit and check

  Hardware devices do not work or are not detected in Windows (Fixit)

  Method 2: Check the steps to get the 37 error code

  Explanation of error codes generated by Device Manager in Windows XP Professional 

  Answer to us if you are having problems with the devcie or any other issue of Windows, and I'd be happy to help you.

  Good day!

  Hope this information helps.

• the iPhone via USB cable connection does not work. Error code 37 - cannot initialize the connection. Sombody has a solution? Thank you.

  See statement above. connect iPhone via USB cable. Error Code 37 - cannot initialize the connection.

  Ah, a famous Apple error. See: http://support.apple.com/kb/ts1275 and http://support.apple.com/kb/TS3125

• Why Adobe cannot initialize the program?

  Why Adobe cannot initialize the program?

  Hello

  Please see error: "Setup cannot initialize ' | Windows

  Hope that helps!

  Kind regards

  Sheena

• Very dark screen of the Satellite L300-1FJ

  Hello

  I have a problem with LCD display on my Satellite L300-1FJ.
  It is very dark. At startup, I hardly see what is on the screen.

  I tried to increase the brightness, but it doesn't seem to work.

  Hello

  You mean you cannot increase the screen brightness by pressing FN + F7?

  Well, I think that the FL inverter is faulty.

  If the FL inverter starts to malfunction so everything on the screen will appear like behind a thick fog.
  In most cases, the FL inverter needs to be replaced.

  So contact the ASP technician in your country and ask for help!

  Good bye

• Cannot start the satellite M35X

  Hi all.

  Cannot start my Satellite.
  When I push the power button, it turns on, the blue led is ok but the HDD led blinks 1 or 2 times or it happened when it is not clear at all and put the laptop off, but the power button remains lit.

  However, from time to time, it starts up, shuts down load the XP but after 1 minute.

  I have reinstaled recently the WinXP, and I did a bios update. Before that, the laptop didn't have this behavior, however, the XP raported me that the hard drive is faulty.
  I figured it is something related to the HARD drive.
  What should I do?

  How can I be sure that the HARD disk is wrong?

  Hi mate,

  If your HARD drive has bad sectors, you must exchange it ;)

  For example before doing this, you can check for bad sectors using specific diagnostic tools HDD as Drive Fitness Test:
  http://www.HitachiGST.com/HDD/support/download.htm#DFT
  Here, you can download an image file to create a boot disk. Then boot from it and to start the test, it is quite easy! ;)

  If your HARD drive is faulty, this tool should recognize this.

• Cannot connect by Satellite L300-1BW to wireless technology

  My Satellite L300-1BW has recently ceased to connect the my Wi - Fi.

  It shows that wireless networks are available, I can see my secure network and there is no red cross through the icon but when I click on IE, it only says: unable to connect.

  I tried with 2 of my friends houses on their connections without wire (previously connected) and it just does the same thing.
  I can see all the networks concerned, but it won't take me actually to my homepage.

  I do not understand why it has just stopped working - drives my lan are up-to-date. Help..!

  Hello

  You can see the WLan, which means that the WiFi is enabled correctly.
  But have you used the good encryption and encryption password in order to connect to the WLan router?

  Please check this!

  Please also check the firewall settings!

• Re: FarCry not displayed on the Satellite L300

  I bought FarCry game but the graphics was not displayed in Satellite L300-1 to 6.
  Although the 3D card minimum is 64 MB for this game, it does not in my computer. Do you have any solutions?

  You have the most recent graphics Toshiba driver?
  Search on the website and make an update:
  http://EU.computers.Toshiba-Europe.com

  In addition to FarCry are patches available. I know, because I've played this game for a long time.
  A Google search for this patch.

• How to change the language of windows vista preinstalled on the Satellite L300 - 14 c?

  Hello
  I bought a new Satellite L300 - 14 c in German. When I started the computer, all the option that I was to install the German version. But I don't know the German language.
  What should I do?
  Thank you very much.

  You must buy the operating system on your preferred language, install it. After this visit download page of Toshiba under http://eu.computers.toshiba-europe.com > support & downloads. There you can find all the drivers, tools and utilities for all European languages.

  Laptops are country specific products and if you have an operating system on another language, that you have to buy one.

• Question about the Satellite L300 to TV connection

  Hi everyone, first of all this is my first post.

  Also I'm a bit geek o when it comes to computers etc., I can use one but im not a wizz tech kid as well as use of base of an im afraid.

  I have a Satellite L300 laptop.

  My question is, my laptop has no HDMI port, but it has a VGA port.
  I have a digital TV with many ports Inc. USB, VGA, HDMI etc.

  I am downloading movies and burn them on dvd, but it's very tedious, so I wonder if I connect the laptop to the tv to use the TV as a monitor screen? so, I can either watch the dvd on the tv, and gold to direct flows to the laptop and then on television.

  I connected a vga cable for the necessary ports between the TV and the pc, and although television confirms that a pc is connected, there is only a white screen? so I guess I can't connect in this way.

  It is not possible to connect using the usb ports? or of other ideas like if I may or may not connect to this laptop?

  Kind regards

  Bob

  Hi Bob

  What laptop has no HDMI port this is a bit complicated. In General, you should be able to use your TV as external monitor. When you connect your laptop with VGA cable to your TV and turn on this port to the TV use the FN + F5 key combination and desktop to TV switch.

  If your TV is correctly detected when you use FN + F5, you should see several options. Problem is that the VGA connection is for video only and you will not hear on your TV. You can transfer the sound, but you must separate the wires and connect the headphone jack of your laptop and openings of his TV or even receiver Hi-Fi if you a.

  It's a little complicated.

• How to restore the Satellite L300 PSLB8E to factory settings?

  I have problems with repeated "crash" of my system.
  I get the dreaded blue page, which then restarts (usually) pretty quickly.

  I think trying the option 'Restore factory settings', but I've never done this before.
  If I do, which will leave it on my computer?

  I have my own disks which I was invited to do the last few months (I just got this machine since May this year) will be I need it, or is there something else that is needed?

  I have a Satellite L300, PSLB8E, using Vista Home Basic

  Hello

  Hmm. I m wondering if you checked a few discussions here on the same theme.
  Did you?
  There are more that enough son and I m sure you will not need to create this thread after reading some reviews.

  Just a tip; the use of HARD drive recovery option will format the system partition, but the D partition (where the HARD drive recovery files are placed) wouldn't be formatted!

  If you are still not sure after reading some discussions, please ask again ;)