Cannot install 0X800F081F SP1\Error

Similar Questions

• Cannot install Vista SP1, error code "WindowsUpdate_80004004" "WindowsUpdate_dt000"

  Summary: I have bad installation of Vista SP1 and would be grateful for any advice, see details below.

  B A C K G R O U N D:

  I am running Vista Home Premium (32-bit version) and I need to upgrade Adobe create Suite 3 (CS3) to CS4. The problem comes from the fact that CS4 requires Vista Service Pack 1 (SP1) and I'm unable to install SP1.

  I really, really want to avoid storing new factory setting and re-install Vista... So, I would be very grateful if there is someone out there who could offer some advice to help me correct my current system with SP1, allowing installation both need the software Adobe CS4. Someone has an idea of what I might try next?

  E R R O R D E S C R I P T I O N:

  After trying to install the Vista SP1, I get the following under Windows Update error code: "WindowsUpdate_80004004" "WindowsUpdate_dt000" Leading to this following error occurs:

  1. SP1 is installed and Vista claims that it is correctly installed (it takes a few hours...)
  2. Computer is restarted and 3 updates are applied to the system. The first of these takes forever and housing is 98% completion for a few hours, not a sign of healty I guess...
  3. Computer is then restarted again (or maybe it goes directly from 2) 3) without a re-boot inbetween?) and now I am facing a window called "Start up repair" telling me "your computer is unable to boot"... here I just have to click Next and the computer now spends in the order of 45 minutes to fix the system. When it's done, Vista starts but without SP1 and Windows journal showing the unsuccessful attempt to install KB936330 entry more an upgrade.

  S Y S T E M C O N F I G:

  • HP Pavilion dv9000
  • AMD Turion 64 X 2 rocessor
  • 2 GB of RAM, 32-bit version of Vista Home Premium, no other OS
  • Trend Micro Internet security (antivirus and firewall)

  Vista updated with all updates high priority, except the following:

  • KB905866, error message "WindowsUpdate_80004004" "WindowsUpdate_dt000"
  • KB936330 (SP1), an error message "WindowsUpdate_80004004" "WindowsUpdate_dt000"
  • KB955430, "WindowsUpdate_800F0825" "WindowsUpdate_dt000" (note the difference)

  W H A T I H A V E T R I E D S O F R:

  Diagnosis of basic computer:

  1. run chdsk: OK
  2. the verification of memory: OK
  3. I also downloaded a Vista recovery disk and booted from the recovery disc. In this mode, I tried to repair Vista, but no error was found.

  I tried to install the SP1 with these configurations, all attempts to exactly the same error as described in detail above:

  • update of the "normal route" via automatic windows standalone
  • Downloaded the stand-alone SP1: unsuccessful (I read somewhere that has helped other users...)
  • disabled wifi: unsuccessful (I read somewhere that has helped other users...)
  • disable the antivirus and Firewall: unsuccessful

  That's all the advice?

  Thanks in advance,
  Peter

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Cannot install Vista SP1: Error Code 2

  Each attempt installation of Vista SP1 fails: Error Code 2.  I tried everything that seems relevant on help and Support.

  Doug K

  Hi Doug K,.

  What is the exact error message received when the problem occurs?

  Method 1:

  You can try the steps from the following link and check if it solves the problem:

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues

  http://support.Microsoft.com/kb/947366

  Method 2:

  You can try the steps from the following link and check if it solves the problem:

  Learn how to install Windows Vista Service Pack 1 (SP1)

  http://Windows.Microsoft.com/en-us/Windows-Vista/learn-how-to-install-Windows-Vista-Service-Pack-1-SP1

  Let us know if it helps!

• Cannot install Vista SP1, error 800F0816

  I reset my computer to factory settings. I went on the installation of the updates that come with, until the time came to Vista SP1. I did the thing, he started to install and when it restarted it sent me to the thing system restore and it has not stopped. I was forced to 'pull the plug' and reset my computer to its previous state before installing SP1. Everything was OK until I did my format. Could this be a problem, that I don't have my original graphics card and RAM on my pc (I have them again).

  What else could I give you, so that you can give me the best possible solution. I just want to know where the fault is and how to fix it. Even if I have to buy new hardware or something like that. Could it be, because I did a format and I have all the drivers and other updates, so that my computer crashes after I turn it on in the morning?
  I get error Code 800F0816, when you try to install the Vista SP1
  Thanks in advance
  Andres.
  Edit: The problem Signature:
  Problem event name: BlueScreen
  OS version: 6.0.6000.2.0.0.768.3
  Locale ID: 1061
  More information about the problem:
  BCCode: 1000008e
  BCP1: C0000005
  BCP2: 8FE8CDF7
  BCP3: 8BB37A8C
  BCP4: 00000000
  OS version: 6_0_6000
  Service Pack: 0_0
  Product: 768_1
  I think I still have these files after restoring that describe the problem.

  Hello

  1. are you able to start your computer normally, now?

  2. Once you get the blue screen error?

  3. is your copy of Windows Vista active?

  Method 1:

  Step 1: Perform a clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: once you are done with the boot, follow step 7 of article to put your computer to normal startup.

  Step 2: Download and install a stand-alone copy of Windows Vista Service Pack 1.

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=30

  Method 2:

  Check the hard disk for errors.

  Check a drive for errors

  http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost

  Method 3:

  Check the memory of your computer for any errors.

  Diagnosing memory problems on your computer

  http://Windows.Microsoft.com/en-us/Windows7/diagnosing-memory-problems-on-your-computer

  I hope this helps.

• Cannot install my printer/error message-unable to create the object print dell v505, that the printer is not compatible with a polcy enabled on your computer that blocks NT 4.0 drivers (1930)

  Original title: cannot install my printer error message

  I am trying to install my printer to dell v505 from the factory disc and get this error message: failed to create the object print dell v505 printer is not compatible with a polcy enabled on your computer that blocks NT 4.0 drivers (1930)

  Any help, need a lot.

  Hello

   
  1. what version of Windows are you using?
  2 did you the chnages in the computer before this problem?
   
  I would suggest trying the following methods and check.
   
  Method 1: Run the fix, install the printer and check
  Diagnose and automatically fix problems printing and printer
  http://support.Microsoft.com/mats/printing_problems/
   
  Method 2:
  Error message when you try to connect to a printer in Windows Vista: "the printer driver is not compatible with a policy enabled on your computer that blocks NT 4.0 drivers.
  http://support.Microsoft.com/kb/931719
  Method 3: Install the printer in a clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7.
  http://support.Microsoft.com/kb/929135
  Note: Please, go to step 7 of the Kb to maintain the computer to normal startup.
   
  You can download the latest driver for your printer from the link below.
  http://www.Dell.com/support/drivers/us/en/04
   
   
  You can also check:
  Printer driver is not Compatible if a policy is enabled on your computer.
  http://support.Microsoft.com/kb/282011
   
  Error message when you try to connect to a printer in Windows Vista: "the printer driver is not compatible with a policy enabled on your computer that blocks NT 4.0 drivers.
  http://support.Microsoft.com/kb/931719

• Cannot install Windows update - error 8007003 - updated fails repeatedley

  Cannot install Windows update - error 8007003 occurs whenever I try to update

  Would have been nice if you included the Windows operating system you are using, but nevertheless (pick that applies to you).

  Windows XP

  You receive an error '0 x 80070002' or '0 x 80070003' code after you download an update from Windows Update, Microsoft Update or Windows Server Update Services
  http://support.Microsoft.com/kb/910336

  When you search for available updates on the update site, you see the Error 80070002 0 x or 0 x 80070003
  http://update.Microsoft.com/windowsupdate/v6/showarticle.aspx?articleid=17&LN=EN&IsMu=false

  Error message when you try to download the updates on the Microsoft Windows Update Web site or from the Microsoft Update on a Windows XP computer's Web site: "0 x 80070003".
  http://support.Microsoft.com/kb/916248

  Vista

  Windows Update error 80070003
  http://windowshelp.Microsoft.com/Windows/en-us/help/dc8636cd-4742-4e4e-B07C-a8cc9c684b261033.mspx

  Description of the update of the system for Windows Vista tool
  http://support.Microsoft.com/kb/947821
  0 X 80070002 ERROR_FILE_NOT_FOUND

  You receive an error '0 x 80070002' or '0 x 80070003' code after you download an update from Windows Update, Microsoft Update or Windows Server Update Services
  http://support.Microsoft.com/kb/910336

  Error message when you try to download updates from Windows Update on a computer that is running Windows Vista: "error 0 x 80070003 the system cannot find the path specified."
  http://support.Microsoft.com/kb/942967

  And here's one for Windows 7

  Windows Update error 80070003
  http://Windows.Microsoft.com/en-us/Windows7/Windows-Update-error-80070003

  TaurArian [MVP] 2005-2010 - Update Services

• Cannot install update (KB2446708) error Code: 0 x 643

  Cannot install update (KB2446708) error Code: 0 x 643

  Hi robandersonyuan,

  You have an Antivirus installed on your system?
  If you have Antivirus proceed to turn off and then try to install the 2446708 KB, also check the section below:

  When you try to install an update for .NET Framework 1.0, 1.1, 2.0, 3.0 or 3.5, you may receive Windows Update '0 x 643' error code or error code Windows install "1603".
  http://support.Microsoft.com/kb/923100

• Paper textures Adobe pro cannot install module: general error message. Help

  Paper textures Adobe pro cannot install module: general error message. Help

  Hello Stephen,

  If you have upgraded your version of Creative Cloud Deskop App in the last 24 hours (to build the 2.1.1.110), you may experience installation problems with some modules that contain the locale specified in the MXI product. I believe in that paper textures Pro has a which may explain the error message.

  Please note that we are aware of this problem and are working on a fix so please bear with us for the predictable a few days until we iron out the bugs and problems arising from the new version. Sorry for the inconvenience caused.

  During this time if your Adobe applications are still on the 2014 CC or MORE (i.e. you have not improved their 2015 CC) then you can select the method 'install another way' described in the troubleshooting step and download the ZXP which allows to install by using the extensions Manager, as before.

  I hope this helps.

  Krystal

  -Team - Add-ons

• Satellite P200D - cannot install Vista SP1

  I tried times serval update to Service Pack 1 of Vista. After that time of serval downloads, laptop installs Service Pack 1. After that serval hours windows update gives an answer that update is not possible with a message that is not explained by Windows.

  What is the problem with the update?

  Hello

  If you cannot update the SP1 then your Vista is confused upward or SP1 is already installed.

  How have you tried to update the SP1? Have you downloaded it from the MS page made one then you perform the update or have you used the Windows Update option in the Panel?

  In your case, I recommend to check first if SP1 is installed.
  If it was not installed, then rub the BONE using the free CCLeaner tool.

  If you want to update the SP1 version, and then try again.

  If that does not help then retrieve the operating system using the Toshiba drive and then try to upgrade Vista to the last State.

  Good bye

• Cannot install the update error KB2718704: 0x8007F064

  Original title: XP, error Code (KB2718704) install failed: 0x8007F064: after that I tried to solve this problem, because as far as I know, but still, there is no, then how should I do?

  Microsoft Update tried to install the update for Windows XP (KB2718704) whenever I closed my computer, but it could not include my manual installation.

  Hello

  Method 1: Run the fixit

  Check out the link:

  The problem with Microsoft Windows Update is not working

  http://support.microsoft.com/mats/windows_update/.

   

  Method 2:

  Check out the link:

  You cannot install some programs or updates

  http://support.microsoft.com/kb/822798.

  Warning: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows XP

  http://support.microsoft.com/kb/322756/.

  You can ignore the 7 method to perform the upgrade in-place.

   

  Method 3: Scan SFC

  SFC scan will find all missing or incorrect system files and repairs them.

   

  File system (CFS) Checker

  http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/system_file_checker.mspx?mfr=true.

   

  Method 4: Install the updates to the clean boot

  Step 1: Clean boot

  When the computer starts to boot, programs non-Microsoft will not be started and would avoid any interruption of their share.

  Check out the link:

  How to configure Windows XP to start in a "clean boot" State

  http://support.microsoft.com/kb/310353.

  Note: To set the computer back to start normally, use the procedure How to configure Windows to use a Normal startup state in the same page.

   

  Step 2: Install the update manually

  Check out the link:

  Update for Windows XP (KB2718704)

  http://www.microsoft.com/en-us/download/details.aspx?id=29975.

   

• Cannot install updates. Error code constant of 0x8007001f.

  IE8, SP3 and windows reinstalled update. Still can not install new updates.

  Hello

  (1) update that you are trying to install?

  (2) what is you get the exact error message?

  (3) remember when you make changes to the computer before the show?

  I would suggest trying the following methods and check if it helps.

  Method 1: Run Microsoft Fixit
  The problem with Microsoft Windows Update is not working: http://support.microsoft.com/mats/windows_update/

  Method 2:
  You can also try the steps in the link and check if it helps.
  You cannot install updates from Windows Update, Microsoft Update, or by using the auto update after a repair of Windows XP after installing Windows XP SP3 immediately after a clean installation of Windows XP SP2 or
  http://support.Microsoft.com/kb/943144

  Warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows:
  http://support.Microsoft.com/kb/322756/

  Method 3:
  If the problem is not resolved, I suggest you try the procedure described in the link mentioned below.

  You cannot install some programs or updates: http://support.Microsoft.com/kb/822798

  Note: It is very important that you back up all your personal data before going ahead with the upgrade on the spot.

  Follow the article below to learn more:
  Temporary connection related errors may occur when you use Windows Update or Microsoft Update
  http://support.Microsoft.com/kb/836941#advmethodC

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you should reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

• Cannot install the update error Code Ox800B010B

  Original title: cannot install the update

  Cannot install the update KB2686827

  Error Code Ox800B010B

  Hello

  1 have had any changes made on the computer before the show?

  2. What is the full and exact error message?

  3. when exactly you get the error message?

  4. the problem occurs for all the updates?

  Method 1:

  I suggest that return you the item and run Microsoft fix:

  Diagnose and automatically fix common problems with Windows Update

  http://support.Microsoft.com/mats/windows_update/

  Method 2:

  Test the problem in clean boot mode.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

• Cannot install SP2, receives error code 0 x 80070490

  Original title: error code 0 x 80070490.

  Windows vista service pack 2 is not installed, as code error 0 x 80070490 rises. How can I fix this error. ? Please in laymans language.

  Hello

  These are the methods of Microsoft to solve this error code in Vista:

  "Windows Update error 80070490"

  http://Windows.Microsoft.com/en-us/Windows/Windows-Update-error-80070490#1TC=Windows-Vista

  @@@@@@@@@@@@@@@@@@@@@@@

  But I would also ask you how you install SP2.

  I use this method.

  Click Start > right click on computer > left click on properties > see if you have Vista 32 bit or Vista 64-bit installed.

  It will also tell you which SP you have installed.

  Then, choose the download of 'bit' OK to use to install Service Packs, installation of SP1 first if it is not already installed.

  Vista SP1 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=30

  Vista SP1 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=21299

  Vista SP2 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=16468

  Vista SP2 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=17669

  This Information Microsoft can help you resolve problems that you encounter during the installation of Service Packs for Vista.

  http://support.Microsoft.com/kb/947366

  See you soon.

• Cannot install updates WIndows error 641

  original title: updates WILL NOT INSTALL RAN CORRECTION IT AND ALWAYS No. CHANCE of ERROR CODE641 not

  Received updates as usual, tried to install, not 2 x a tried to run again, has failed, ran the fix on the site has not yet. Ran the program to check the clear computer etc viriuses but updates will not be installed after fix it says download fixed

  Hi LinMiller,

  What fixit did you run?

  Try following the methods provided below and see if it helps:

  
  Method 1:

  It seems that there is a problem with the update of Windows. Click on the link below.

  How to resolve problems connecting to Windows Update or Microsoft Update

  http://support.Microsoft.com/kb/818018

  
  Method 2:

  Follow the steps mentioned in the article below.

  Step 1:

  It may be that a third-party application is causing this issue. Put the system at boot. Follow the steps mentioned in the article given below to configure the system to boot and try to update.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Once you have finished installing, follow step 7 article to start on normal startup.

  Step 2

  Download updates manually from the Microsoft site and install on the system to boot and see if the problem is resolved.

  http://www.Microsoft.com/downloads/en/default.aspx

  
  Method 2
  I suggest you try the steps from the following link:

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article:   back up the registry in Windows Vista

  Method 3
  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
  http://support.Microsoft.com/kb/2509997
  
  Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article:   back up the registry in Windows Vista

  Also I suggest you to return the item mentioned below.

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

• Cannot install KB2653956 get error code 80071aa7

  Every day that I get a message that I need to install update KB2653956.  I have download and restart my computer, but it goes back to the previous settings when you set up.  Then, I get error code 80071aa7 when it fails.  I tried the Mr FixIt, reset Windows Update, disable my antivirus and firewall and I always get a reminder to install the update. Someone at - it ideas?

  Hello

  Method 1:

  I also suggest you go through the steps mentioned in the link and the Coachman.

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Method 2:

   

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798

  Method 3:

  If the steps do not help, I you suggest to perform a clean boot and then try to install the update manually.

  Step 1:

  Clean boot helps eliminate software conflicts.

  Follow the steps mentioned in the article below.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7 http://support.microsoft.com/kb/929135

  Note: when you are finished troubleshooting, follow step 7 article to start on normal startup.

  Step 2:

   

  You can download the update manually from the link below.

   

  MS12-024: vulnerability in Windows could allow remote code execution: April 10, 2012

  http://support.Microsoft.com/kb/2653956

   

  Hope this helps and keep us posted.