Cannot install Vista SP1, error 800F0816

Similar Questions

• Cannot install Vista SP1: Error Code 2

  Each attempt installation of Vista SP1 fails: Error Code 2.  I tried everything that seems relevant on help and Support.

  Doug K

  Hi Doug K,.

  What is the exact error message received when the problem occurs?

  Method 1:

  You can try the steps from the following link and check if it solves the problem:

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues

  http://support.Microsoft.com/kb/947366

  Method 2:

  You can try the steps from the following link and check if it solves the problem:

  Learn how to install Windows Vista Service Pack 1 (SP1)

  http://Windows.Microsoft.com/en-us/Windows-Vista/learn-how-to-install-Windows-Vista-Service-Pack-1-SP1

  Let us know if it helps!

• Cannot install Vista SP1, error code "WindowsUpdate_80004004" "WindowsUpdate_dt000"

  Summary: I have bad installation of Vista SP1 and would be grateful for any advice, see details below.

  B A C K G R O U N D:

  I am running Vista Home Premium (32-bit version) and I need to upgrade Adobe create Suite 3 (CS3) to CS4. The problem comes from the fact that CS4 requires Vista Service Pack 1 (SP1) and I'm unable to install SP1.

  I really, really want to avoid storing new factory setting and re-install Vista... So, I would be very grateful if there is someone out there who could offer some advice to help me correct my current system with SP1, allowing installation both need the software Adobe CS4. Someone has an idea of what I might try next?

  E R R O R D E S C R I P T I O N:

  After trying to install the Vista SP1, I get the following under Windows Update error code: "WindowsUpdate_80004004" "WindowsUpdate_dt000" Leading to this following error occurs:

  1. SP1 is installed and Vista claims that it is correctly installed (it takes a few hours...)
  2. Computer is restarted and 3 updates are applied to the system. The first of these takes forever and housing is 98% completion for a few hours, not a sign of healty I guess...
  3. Computer is then restarted again (or maybe it goes directly from 2) 3) without a re-boot inbetween?) and now I am facing a window called "Start up repair" telling me "your computer is unable to boot"... here I just have to click Next and the computer now spends in the order of 45 minutes to fix the system. When it's done, Vista starts but without SP1 and Windows journal showing the unsuccessful attempt to install KB936330 entry more an upgrade.

  S Y S T E M C O N F I G:

  • HP Pavilion dv9000
  • AMD Turion 64 X 2 rocessor
  • 2 GB of RAM, 32-bit version of Vista Home Premium, no other OS
  • Trend Micro Internet security (antivirus and firewall)

  Vista updated with all updates high priority, except the following:

  • KB905866, error message "WindowsUpdate_80004004" "WindowsUpdate_dt000"
  • KB936330 (SP1), an error message "WindowsUpdate_80004004" "WindowsUpdate_dt000"
  • KB955430, "WindowsUpdate_800F0825" "WindowsUpdate_dt000" (note the difference)

  W H A T I H A V E T R I E D S O F R:

  Diagnosis of basic computer:

  1. run chdsk: OK
  2. the verification of memory: OK
  3. I also downloaded a Vista recovery disk and booted from the recovery disc. In this mode, I tried to repair Vista, but no error was found.

  I tried to install the SP1 with these configurations, all attempts to exactly the same error as described in detail above:

  • update of the "normal route" via automatic windows standalone
  • Downloaded the stand-alone SP1: unsuccessful (I read somewhere that has helped other users...)
  • disabled wifi: unsuccessful (I read somewhere that has helped other users...)
  • disable the antivirus and Firewall: unsuccessful

  That's all the advice?

  Thanks in advance,
  Peter

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Satellite P200D - cannot install Vista SP1

  I tried times serval update to Service Pack 1 of Vista. After that time of serval downloads, laptop installs Service Pack 1. After that serval hours windows update gives an answer that update is not possible with a message that is not explained by Windows.

  What is the problem with the update?

  Hello

  If you cannot update the SP1 then your Vista is confused upward or SP1 is already installed.

  How have you tried to update the SP1? Have you downloaded it from the MS page made one then you perform the update or have you used the Windows Update option in the Panel?

  In your case, I recommend to check first if SP1 is installed.
  If it was not installed, then rub the BONE using the free CCLeaner tool.

  If you want to update the SP1 version, and then try again.

  If that does not help then retrieve the operating system using the Toshiba drive and then try to upgrade Vista to the last State.

  Good bye

• Cannot install 0X800F081F SP1\Error

  Mr President.

  I'm trying to update my windows vista Basic by installing the vista sp1 update (by downloading and installing the file. Windows6 0-KB936330-X 86 - wave0.exe)

  I m receiving the following error when installing bar displays approximately 60% completion:

  0x800F081F

  I HAV installed KB947821 package that is said about the troubleshooting Web site.

  I use the clean boot mode.

  I use windows anti-virus software.

  See the response I got from microsoft http://answers.microsoft.com/en-us/windows/forum/windows_other-windows_update/error-code-0x800f081f-while-installing-windows/36742854-6c8c-4c49-ac29-7a2caf1d87f7

• Cannot install Vista SP1 - getting error code: 0x800F0826...

  I'm trying to update my computer toshiba with SP1 and SP2 on Vista Home Premium, but I get the following installation was not successful error code: 0x800F0826... Please advise!  Thank you.

  1. it fails during the installation...
  2 - no changes were made to the computer to my knowledge... I was never able to install SP1.

  Windows Update error 800f0826 is displayed when an update for Windows has failed to install and prevents you from installing additional updates. Error 800f0826 does not identify the update that caused the problem. The update that caused the problem will display a different error. This problem affects only the updates for Windows and does not prevent you to install or to automatically receive updates for other Microsoft programs, such as Microsoft Office System. Ref: http://windows.microsoft.com/en-US/windows-vista/Windows-Update-error-800f0826

  Please check updated code and the previous error and post back with the details of the same.

  Thank you.

• Cannot install Vista SP1 or SP2 for I can develop upgrade to Windows7 as suggested by Microsoft. Get error code 0 X 80073712.

  I currently have Windows Vista Home Premium.
  32 bit OS
  I bought the package of Windows 7 Home Premium upgrade.

  Did you run the Advisor? - http://windows.microsoft.com/en-US/windows/downloads/upgrade-advisor

  Regarding the Vista error code:

  Error message when you try to install updates on the Microsoft Update or Windows Update Web site: "0 x 80073712".
  http://support.Microsoft.com/kb/957310

  TaurArian [MVP] 2005-2010 - Update Services

• Cannot install Vista SP1

  I tried ALL the solutions proposed and it will NOT be installed. It downloads fine, but after "installation" it fails. error code FFFF 0x8000. I have the stand alone version and the version of the SP1 updates. Can someone help me, please?

  I am preparing my laptop to Windows 7, which expect to receive any day. When I ran the W7 Upgrade Advisor report - it says that the installation of SP1 is a must.
  Help!

  Client Windows Update not found with error 0x8000ffff.

  The error may occur if one of the following factor is true:

  1. the services concerned of the Windows Update stop working.

  2. the temporary folder of Windows Update has been damaged.

  3. Windows Update Agent does not work.

  For now, let's try the following steps to solve the problem. After you complete the steps, please run Windows Update to check the result.

  Step 1: Check the services concerned of the update of Windows
  ============================

  1. click on Start, type services.msc in the Search box and press ENTER.

  2. in the right pane, check if the following three services have been launched:

  (BITS) Background Intelligent Transfer Service
  Windows event log
  Windows Update

  If not, please start one by one.

  Step 2: Rename the folder C:\Windows\SoftwareDistribution Windows Update
  =========================================

  1. click on Start, type notepad in the Start Search box and press ENTER.
  2 copy the following commands, and then paste them into the opened Notepad window:
   
  net stop wuauserv
  net stop Cryptsvc
  Ren %windir%\SoftwareDistribution SD.old
  Ren %windir%\system32\catroot2 catroot2.old
  net start wuauserv
  net start Cryptsvc
   
  3. After you paste the above commands, please close the Notepad window. Choose Save when you are prompted to save the file. Type "register.bat" as the file name, and choose desktop in the left as the location Panel.
  4. refer to the desktop, right-click on the register.bat file and choose run as administrator.
  5. you will see a window of type BACK treatment.

  Note: Please look at the cmd window and make sure that it says it has successfully launched. After that, run Windows Update to test the issue again.

  If the 0x8000ffff error persists when you search for updates, we will reinstall Windows Update Agent 3.0.

  Step 3: Reinstall Windows Update Agent
  ===========================
  1. Please download the file from the following link:

  A new version of the Windows Update Agent is available
  http://support.Microsoft.com/kb/946928

  2 save the file to D: drive.

  Note: Please select a drive where Windows Vista was not loaded because the file cannot be launched directly from the root directory of the system.

  3. click on Start, click on run, type: "D:\WindowsUpdateAgent30-x86.exe /wuforce" (without the quotes) and press ENTER to install the Windows Update engine.

  Note: There is a space between "D:\WindowsUpdateAgent30-x86.exe" and "/ wuforce.

  BTW - the latest Windows Update Agent will change the appearance of the control panel of Windows Update

  Screenshots of Vista - before and after the Windows Update Agent 7.4.7600.226 - http://taurarian.mvps.org/Screenshots_Vista/before_and_after.html

  For MS Blog: http://blogs.technet.com/mu/

  TaurArian [MVP] 2005-2010 - Update Services

• Satellite A200-TR6 - cannot install Vista SP1

  I have Windows Update automatically installs updates the value, but it fails to install SP1. Specifically, I had SP1 in my file "Updates on hold" for a few months now, but it never installs. When I try and do it manually (as in by selecting 'Install now'), he goes through most of the process and then said it didn't and he'll try again. It restarts, try to install it again, then after 45 minutes reports that it cannot.

  I remember reading somewhere that it was due to an incompatibility with the driver for the built-in webcam, but there is never presented solutions. Any ideas?

  Hello

  I think that you need to check only this article in the Microsoft Knowledge Base:
  http://support.Microsoft.com/kb/947366

  Welcome them

• Cannot install Vista SP1 on Equium P200

  Says Windows installs, then stops, starts to set up, but then returns the changes. Anyone else had similar and then successful problems to install. This on windows vista edition Home premium 32-bit on Equium P200.

  Checked for all the updates on Vista, perfectly up-to-date. Also stop Firewall etc. Can someone help with this problem?

  Hello

  It's funny you say that, because my friend has exactly the same problem as you! (but is not on a laptop, on a standard desktop configuration).

  When the service pack installs it checks for incompatible software during installation. What I would recommend would be to backup your data and install Service Pack 1 _directly_ after recovery of product and then install the 3 rd party software you want to install.

  (Especially the burning of programs/language packs being installed), I found that this has harmed the configuration causing the cancellation of the installation.

  If you give that to try and see what happens and if it doesn't work then come back and we can see what it can be.

  When my friend re-installed Windows and the Service Pack because it worked, allowing him to install its own software on top.

  Installation/Recovery > all Windows updates > Service Pack 1 > 3rd party software

  I hope this helps

  Kind regards
  Nukey

• Cannot install vista SP2. Go back to step 3 of 3 error E_FAIL (0x80004005)"?

  original title: cannot install vista SP2. Resets the return on step 3 of 3.

  I tried to install SP2 for vista, it fails. automatic update failed he proceeds to step 3 of 3 and go back. I tried the manual download, that there is too much. He is gone to step 3 3 100% and then looked back. has given an E_FAIL (0x80004005) error code please help because I can not install msn live messenger without SP2.  I have Service Pack 1 installed.

  IAM running windows Vista 32 bit, home premium.

  Try these institutions.

  http://support.Microsoft.com/kb/971204/

  http://support.Microsoft.com/kb/313222

  Go to control panel-> Windows Update control, click "Edit settings", then select "Allow all users to install updates on this computer" and click OK. Restart, then install SP2.

• Vista SP1 - error startup! 0xc0190002! 328/88027 ($$ _boot_pcat_ja - jp_d98fca962b0246de.cdf - ms). I can not get this error to go away and start my PC now. Help, please!

  Vista SP1 - error startup! 0xc0190002! 328/88027 ($$ _boot_pcat_ja - jp_d98fca962b0246de.cdf - ms).  I can not get this error to go away and start my PC now.  Help, please!

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or try this Forum:

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/threads

  Restore the previous settings, repair facilities, and retrieve data.

  See you soon.

  Mick Murphy - Microsoft partner

• Cannot install my printer/error message-unable to create the object print dell v505, that the printer is not compatible with a polcy enabled on your computer that blocks NT 4.0 drivers (1930)

  Original title: cannot install my printer error message

  I am trying to install my printer to dell v505 from the factory disc and get this error message: failed to create the object print dell v505 printer is not compatible with a polcy enabled on your computer that blocks NT 4.0 drivers (1930)

  Any help, need a lot.

  Hello

   
  1. what version of Windows are you using?
  2 did you the chnages in the computer before this problem?
   
  I would suggest trying the following methods and check.
   
  Method 1: Run the fix, install the printer and check
  Diagnose and automatically fix problems printing and printer
  http://support.Microsoft.com/mats/printing_problems/
   
  Method 2:
  Error message when you try to connect to a printer in Windows Vista: "the printer driver is not compatible with a policy enabled on your computer that blocks NT 4.0 drivers.
  http://support.Microsoft.com/kb/931719
  Method 3: Install the printer in a clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7.
  http://support.Microsoft.com/kb/929135
  Note: Please, go to step 7 of the Kb to maintain the computer to normal startup.
   
  You can download the latest driver for your printer from the link below.
  http://www.Dell.com/support/drivers/us/en/04
   
   
  You can also check:
  Printer driver is not Compatible if a policy is enabled on your computer.
  http://support.Microsoft.com/kb/282011
   
  Error message when you try to connect to a printer in Windows Vista: "the printer driver is not compatible with a policy enabled on your computer that blocks NT 4.0 drivers.
  http://support.Microsoft.com/kb/931719

• Cannot install Windows update - error 8007003 - updated fails repeatedley

  Cannot install Windows update - error 8007003 occurs whenever I try to update

  Would have been nice if you included the Windows operating system you are using, but nevertheless (pick that applies to you).

  Windows XP

  You receive an error '0 x 80070002' or '0 x 80070003' code after you download an update from Windows Update, Microsoft Update or Windows Server Update Services
  http://support.Microsoft.com/kb/910336

  When you search for available updates on the update site, you see the Error 80070002 0 x or 0 x 80070003
  http://update.Microsoft.com/windowsupdate/v6/showarticle.aspx?articleid=17&LN=EN&IsMu=false

  Error message when you try to download the updates on the Microsoft Windows Update Web site or from the Microsoft Update on a Windows XP computer's Web site: "0 x 80070003".
  http://support.Microsoft.com/kb/916248

  Vista

  Windows Update error 80070003
  http://windowshelp.Microsoft.com/Windows/en-us/help/dc8636cd-4742-4e4e-B07C-a8cc9c684b261033.mspx

  Description of the update of the system for Windows Vista tool
  http://support.Microsoft.com/kb/947821
  0 X 80070002 ERROR_FILE_NOT_FOUND

  You receive an error '0 x 80070002' or '0 x 80070003' code after you download an update from Windows Update, Microsoft Update or Windows Server Update Services
  http://support.Microsoft.com/kb/910336

  Error message when you try to download updates from Windows Update on a computer that is running Windows Vista: "error 0 x 80070003 the system cannot find the path specified."
  http://support.Microsoft.com/kb/942967

  And here's one for Windows 7

  Windows Update error 80070003
  http://Windows.Microsoft.com/en-us/Windows7/Windows-Update-error-80070003

  TaurArian [MVP] 2005-2010 - Update Services

• I had problems to install Vista SP1 on different computers 2 Scared of Vista SP1.

  I had problems installing Vista SP1 on 2 different computers and have had to reinstall OS and at the same time, after the reinstallation of Vista, Windows update has updated all the updates up to SP1 and I'm afraid to click on it.  I just finished rebuilding my laptop and all important updates and stopped at SP1.  I ran the System Readiness tool update on my desktop and am really GUN-SHY click on SP1.  Is there something else I can look for or take into account before clicking GO?  I was really upset when the laptop was working fine without it and against my instinct clicked on install when Windows update finally offered it.  I was surprised, that he had not come forward.  I have HP Pavilion, AVG and it is on both machines.   On the desktop I had updated SP1 when it first came out, and something zapped my video card and had to install a video card to see what was going on.  Finally I had to buy another HP motherboard.  It was not cheap.  I'm really scared to click on install. And I would like to put into practice what I preach to end-users, but experience twice shot dark me and path of restoration.  Thank you.

  I'm back - I'M MY technician.  I support experience dating back to the beginning of the 1990s.  I tried your advice and humiliated.  What I have to lose - I said. If this does not work, I'll reformat and start over.   here goes.

  I reformatted, reinstalled OEM in new condition.  Bypassed the Code Purple HP tattoos on their generation, where we replaced the MB that I had.
  Uninstalled Norton, installed the Norton remover.
  Installed MS Security essentials.   Yet once, I said why not.  try it.
  Installed all the updates that Microsoft had to offer.   Have to him. I said.
  It took almost two days.
  System has all updates included SP1 and SP and anything withdrew automatic update of Ms.
  Ok.
  browser, flash, drivers, software for personal use
  System is being run-
  Scanned primary and any secondary t.o.d. after reconnecting them - disconnected for the reformat.

  There are other questions which seem to me with ISP but I meet with them, or open a new question.  For now, Vista SP1 and 2 are in.

  Oh and if anyone has a HP, which gets a code purple error after entering the process of restoration - Shift and F10 while the purple error code is on the screen and rename files from HP in the form of command prompt to convey this purple code and continue with the installation.  I had to find this info on the site of HP after the first reformat.

  and another thing.  I had to take my firewall router a notch to allow download of the Norton removal tool.  Why they still use FTP for one simple download is beyond me.  -

  Nice day