Cannot install addons for about: addons

Similar Questions

• Cannot install itunes for windows - error: Apple Application Support is required to run Itunes Helper. Uninstall and reinstall (as I did twice)

  Cannot install itunes for windows - error: Apple Application Support is required to run Itunes Helper. Uninstall and reinstall (as I did twice)

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• Cannot install updates for Windows 7 SP1

  Hello

  I tried for awhile now to switch to Windows 10 without luck ( http://answers.microsoft.com/en-us/windows/forum/windows_10-win_upgrade/windows-7-key-not-recognized/9a66ab9a-819a-4285-9461-64e7528db222?tm=1450545430339&auth=1 ). In the end, I decided to reinstall Windows 7 RTM, install all updates and then upgrade to Windows 10.

  Unfortunately, I seem to be impossible to install updates for Windows 7 now. Everything was going fine until Windows Update Agent 7.6.7600.320 installed. After a few mistakes, WU start looking for updates for hours. I've tried everything as suggested here without a bit of luck. In the end, I decided to leave it to search through the night and finally it does find and download updates about 300.

  Installation of these updates takes about 4 hours and Windows restarted and tried to configure the new updates, restarted saying once again he could not configure the updates of Windows and it will undo the changes. And it's been like that for over an hour.

  So as soon as now I can not even update Windows 7, not to mention the upgrade of Windows 10.  Any ideas? I'm sick of the Windows updates, causing problems.

  Installation sometimes loads of updates at a time can cause problems. When you access the list of the 300 updates Windows updates to odd day again, deselect all of them and then choose the oldest (for example) 50 and see if they install on their own.

  Sometimes do fall off a long list of updates and try to install more small pieces may help them to install.

  Is not sure, but its worth a try as a first shot.

  (I know what you mean though issues of update.) It makes you wonder what's going on sometimes :-()

  If this does not help, is there required failure account error codes?

• Re: Satellite A300-1 b 9 - cannot install updates for Vista and IE8

  Hello

  I have a Toshiba Satellite A300 1 9 b I bought 9 months ago. It has Vista Home Premium 32 bit SP1. I have serious problems with the updates:

  1 Microsoft .NET Framework 3.5 Service Pack 1 and the .NET Framework 3.5 Family Update (KB951847) x 86 - I can't install this for the last two months. Whenever it appears that the installation has failed.

  2 security Update for Windows Vista (KB961501) can be installed as well

  3. my Internet Explorer 8 does not work for the past two weeks. I tried to download it and when I did, then, my computer does not restart. I had to use sans-echec Mode, uninstall IE8 to return to Normal Mode

  4. I also tried to download and install SP2 for Vista, but it failed.

  I am very worried. Please suggest me what I should do.

  Thanks for your help.
  Stéphane

  I think that the decision of the antivirus program is a personal opinion

  I put t like McAfee and Norton because they need a lot of system resources and do a slower computer.
  I prefer AntiVir and Kaspersky Security suite. The two programs have good scan engine and don t need a lot of system resources. They are easy to use to use it.
  AntiVir is free but it s just an antivirus. Kaspersky Security suite also contains a firewall, antispam filter and more.

  It s your choice what program you are using. ;)

• Cannot install Games for Windows Live

  I need to install Games for Windows Live to play several games on this laptop.

  When I run gfwlivesetup, all downloads very well and gets to the point where it installs GFWL and I get the following error every time:

  "An error occurred during the installation of assembly ' Microsoft.VC90.CRT, version ="9.0.21022.8", publicKeyToken ="1fc8b3b9a1e18e3b"processorArchitecture ="x 86", type ="win32 "'. See Help and Support for more information. »

  Looking through several log files, I discovered the error to be (0x8007078f) code that relates to, "connection failed: the machine you log on is protected by an authentication firewall." The specified account is not allowed to authenticate on the machine. »

  So two things come to mind. The account is authenticated and firewall. Well, my account is an administrator account and right click on gfwlivesetup and choose "run as Administrator" does not change a thing. Well, screw the router, I just take the right out of my router modem jack and plug rather the ethernet of my laptop, without going through all the ports that can be blocked. The only firewall that is up and running (the only one installed) is the MS OS firewall, so let's just turn this baby off and still the same error.

  So if we ignore all the error code (0x8007078f) completely, then we can treat the error originally presented... I see basically: processorArchitecture = "x 86", type = "win32".

  Well, I'm running a Windows 7 64 - Bit, and my processor is a Core i7-740... I am out of the resources here. I have seen many people having the same problem or similar (Google reveals a lot). So if someone is willing to stick with me throughout this, I intend to see resolved (at least for me). I only pray that as I did not reinstall Win 7 or make repairs. They do not understand all of these DVDs with the laptop.

  Thanks in advance,

  Jimmi G

  PS: System Specs

  Windows 7 Home Premium

  Intel Core i7-740

  6 GB DDR3 RAM

  GeForce GTX 460M

  Realtek HD Audio

  Hello

  The information below should be beneficial to obtain a resolution.

  http://www.Microsoft.com/games/en-us/support/pages/editgamerprofile.aspx

  http://www.Microsoft.com/games/en-us/community/pages/forums.aspx

  http://www.Microsoft.com/games/en-us/support/pages/default.aspx

  Thank you

  Aaron
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Cannot install updates for windows xp * error 0 X 80070424

  I can't start my microsoft firewall nor my update, I checked to make

  sure my updates are fixed to the car and they are, please help.

  Thank you

  AND

  http://support.microsoft.com/kb/968002 -

  Levonorgestrol error 0 x 80070424 when you use Windows Update, Microsoft Update, or Windows Firewall

   

  Summary:

  When you try to perform one of the following, you may receive an error message that contains error code:

  0 x 80070424

  • Install updates using Windows Update
  • Install updates using Microsoft Updates
  • Install updates for Microsoft Security Essentials
  • Start the Windows Firewall

• Cannot install updates for Vista Business - codes 8E5E0147, 00009C 47, dt000

  Get codes 8E5E0147, 00009C 47, dt000 when you try to install the updates.  2 codes of the latter appear when you try to download Windows explorer 9.

  Hi MarkVI,

  1. what update does not install?

  Follow the steps below to install the Vista updates.

  Method: 1

  Configure the computer to clean boot.

  View the following command to configure the computer to boot:

  How to perform a clean boot

  Note: After checking in the clean boot, follow step: 7 article to reset the computer in normal mode.

  Method: 2

  Perform the following troubleshooting steps to install updates for Windows Vista.

  Problems with installing updates

  Method: 3

  Also to reset the windows update components.

  How to reset the Windows Update components?

• Cannot install driver for Canon selphy cp720 on Windows 8

  Cannot install the driver on windows 8

  I was indeed able to correctly install the driver Windows 7 on Windows 8.1 (x 64). I downloaded the V4.0 - German pilot (since it's my native language) page of Canon and used Compatibility Settings (Windows 7 + admin) Support and the executable installed the driver without worries. After the Installation of the printer showed normally and I am able to print photos using Version 8.1 Windows of the guns 'ImageBrowser Ex' (which I installed in front, requiring "Run as Administrator" too, otherwise indicating a failure during install).

• Cannot install addon off-site because "Firefox prevented this site asking you to install the software on your computer.

  I try to install GMail Watcher by Sonthakit. It is hosted off site here: https://sites.google.com/site/sonthakit/gmailwatcher

  Whenever I try to install the addon by clicking on 'Install the free', Firefox tells me "Firefox prevented this site asking you to install the software on your computer" and does not give me an option to ignore the warning and install it anyway. I clicked on the padlock icon in the address bar and activated all the appropriate permissions, but it will not yet let me install the addon even after restarting Firefox. I have just reset Firefox and use the latest version.

  How can I say grass and let me install the Firefox addon?

  This is because the part of the page button is loaded into an iframe, as you can see if you click on the button install free
  You get only the button allow if this button is located in the home page and not when the button is in an iframe.
  One solution is to open this image in a new tab by right clicking the button.

• Portege Z830: Cannot install Win7, complains about driver CD/DVD

  Hello!

  I have a brand new Portege Z830 and as usual wanted to start by installing a new installation of Windows 7 x 64 (that I don't want the software provided and cannot be trusted, that it is safe in any case). I have saved all of the disk, prepared a flashdisk USB bootable with Windows Setup and it. The flashdisk OK boots, Windows wonder about my language and keyboard, and then shows a screen where I can choose between installation, repair and something else (the Recovery Console, I think).

  I click on install, Windows starts the installation program aand once a first dialog box appears, it displays an error message that basically says (this is a translation of the message from my localized Windows): "a required CD/DVD drive driver is missing. If you use a driver from the floppy disk, CD, DVD, or the flashdisk, insert now. "And I can't get over this error message. The strange thing is, there is no reason for that Windows requires no additional driver, because he can read the installation flashdisk (apparently) and he can see the ultrabook SSD, too (can be verified as well in the recovery console and clicking the browse of this dialog box). So far I have tried:

  (1) four different Windows 7 images (two of them to MSDN AA, two physical, that have been used successfully to install the OS before).

  (2) switch SATA mode to AHCI Compatible.

  (3) two different flashdisks.

  (4) any combination of the boot order.

  Nothing has worked. I even tried e-mailing of Toshiba, but all messages to return with 'user unknown' (understandable, I had to guess addresses since Toshiba doesn't seem to provide some official way to communicate with them - or is hiding if well I have found it). Does anyone have an idea what I can try next? I rather like the Z830 and I'd love to use it, but the ability to install my own installation of the operating system is essential for me.

  Thanks, Pepak

  > I tried e-mailing of Toshiba...
  Maybe stupid question now, but have you tried to contact Microsoft too? If the BIOS is OK, and if all the USB ports work correctly, I don t think it is Toshiba related issue. Toshiba offers notebook with the original recovery image (WIN7 64-BIT HOME PREMIUM) and ability to create bootable USB stick with the recovery image that can be used when you want.

  What you do now is your own installation of the OS. Toshiba has to do is to offer to all the important factors, download tools and utilities on the drivers page.

  What else could you try? Try to get external USB ODD and trying to install WIN7 using Microsoft installation disc. I'm sure it will work.

• Cannot install drivers for Deskjet 3650 in Windows 7 XP

  I have a HP Deskjet 3650 which is connected through the USB port on my primary computer running Windows 7.  I can print without problem, I have problems sharing this printer with 2 other computers running Windows XP.  I downloaded the drivers for XP and excerpts on the Windows 7 computer.

  On the properties of the printer HP Deskjet 3600 series, I clicked on the sharing tab.

  Share this printer and rendering of printing on client computers are both checked.

  When I click on additional drivers, only X 64 is checked and said yes less installed.

  The two other options (Itanium and x 86) are both unchecked and say no less installed.

  I tried x 86 control and clicking on OK.  Then I am asked to install print drivers and browse to where are printer drivers.  I navigate to the 3600, enu, pilots, win2k_xp folder and see hpf3600k.inf when I click Open, then select OK, I get a selected printer driver not found error that indicates the specified location does not contain the driver for hp deskjet 3600 series (BOBO) on the architecture of processor required.

  On one of the XP machines, I installed the printer software and am not able to print if I physically plug the printer on it.

  On another XP machine, I have installed the printer software, but I download and extract the drivers.  When I click on the Add Printer Wizard and select the printer on the network, it tells me that I'm about to connect to a printer on the computer Windows 7 and says that it will automatically install a print on my machine driver.  I click Yes to allow him to continue and he told me that the server for the hp deskjet 3600 printer doesn't have the installed printer driver and I can click OK to search for the correct driver.  I click OK and navigate to the folder I extracted the drivers to and see that hpf3600k.inf is located in the folder and click OK and I get a window of driver error install that says that Windows cannot locate a suitable printer driver.  To help locate and install a suitable driver, contact your administrator.

  So, it seems to me that the driver that I downloaded on the site of hp for Windows XP is not the correct driver, am I wrong here?

  How can I get this printer to print on all 3 computers work without having to move from one to the other.  The printer must be physically connected to the Windows 7 computer, as the other 2 are in children's rooms.

  Try the following: on the machine XP go to the printers and Faxes folder, add a local printer, printer, create a Port, Local Port, \\Computername\Printername (use the name of the actual share of the shared computer and printer), OK, and then click disk and point to the directory where you unzipped the driver XP.

  On the XP machine, you have already installed the driver do the following: go to the printers and Faxes folder, right click on the Deskjet 3650, select Properties, Ports, the port, Local port Add, new Port, \\Computername\Printername (use the name of the shared computer and printer), OK.

• Cannot install - update for Microsoft Office System 2007 (KB973704) security

  I have been serching online and nothing has worked.  I tried to download the file myself, but it still will not be installed.

  Does anyone have other ideas?   It's the only update that will not be installed.

  See the section "How to get help" of http://support.microsoft.com/kb/973704

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy.  If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  Consumer Security Support homepage
  https://consumersecuritysupport.Microsoft.com/

  For more information about how to contact your local Microsoft subsidiary for security update support issues, visit the International Support Web site: http://support.microsoft.com/common/international.aspx

  For enterprise customers, support for security updates is available through your usual support contacts.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Cannot install drivers for HP photosmart C4640

  Try to install the drivers for HP Photosmart C4640 online I have no CD. After downloading, click on install and I have two such messages: the instruction at "0x7712153d" referenced memory at "0x77c623d8" memory can not be read.

  Second: this computer only has not the necessary software support USB to allow installation of the USB installation.the cannot continue until it is resolved.
  Action required: click Cancel to exit this software installation. To install this device as a USB key. Please consult your computer documentation or documentation of expansion card USB for more information on USB drivers. Please I need help.

  Of devices and printers, remove all installed drivers now for this printer. Unplug the printer from the computer. Reboot the computer. Access

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=228&LC=en&cc=us&DLC=en&sw_lang=&product=3831669#n191

  and download the appropriate drivers for your operating system. Install them according to the instructions. Do not connect the printer to the computer before trhe instructions or guests will tell you of the screen.

  Tom Ferguson

• Cannot install Need For Speed: Shift 2 Microsoft Visual C++ Runtime Library Assertion failed!

  Original title: MsiExec install problem.

  ---------------------------
  Microsoft Visual C++ Runtime Library
  ---------------------------
  The assertion failed!

  Program: C:\WINDOWS\system32\MsiExec.exe
  File:.\CaCheckDiskSpace.cpp
  Online: 293

  Expression: 0

  For more information on how your program can cause an assertion
  failure, see the Visual C++ documentation on asserts

  (Press Retry to debug the application - JIT must be enabled)
  ---------------------------
  Abort Retry Ignore
  ---------------------------

  I am trying to install the new Need For Speed: Shift 2 and what is happening.

  What should I do?... I checked the installation on other computers, and it works, it's just my computer I guess.

  Thanks in advance ():

  Click on the link below to view the titles of Need for Speed that show to be compatible with Windows 7. It may not be a list complete, so you need to check on the manufacturer's website.

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?l=en-us&type=software&s=need%20For%20Speed%3A%20Shift%202&page=1

  If it is not compatible, you can try and do a right click on the seutp.exe or .msi and select 'run as administrator '.

  If the program is not compatible, then you try to install and run the program in compatibility mode.
  Use the following steps:
  (1) right click on the program
  2) click Properties
  3) click on the Compatibility tab
  (4) select run this program in compatibility mode and select Windows Vista or other operating system, the program has been run successfully.

  Check out the link here: make sure to run older programs in this version of Windows
  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  If you are running Windows 7 Professional or Ultimate version, install Windows Virtual PC and Windows XP mode (http://www.microsoft.com/windows/virtual-pc/default.aspx) and run your software in Windows XP.

  If you run Windows 7 Home Premium, you cannot run Windows XP mode, but you can try VirtualBox (www.virtualbox.org) or VMware Player (www.vmware.com), or any other 3rd party software virtualization and install a separate copy of Windows XP (family or professional edition) for this purpose. You can find the virtualization software free that will run on Windows 7 Home Premium.

  I hope this helps.

  Marilyn

• Cannot install updates for windows - 8007371b and 643

  Original title: failedupdates

  I continue to turn updates, but it is not with the following codes 8007371 b and 643 do - what I have to do?

  Hello

  (1) updates you trying to install?

  (2) is the specific question of specific updates?

  (3) have you made recent changes to the computer before the show?

  I suggest the following methods and check if it helps to solve the problem.

  Method 1 run system update tool 0x8007371B ERROR_SXS_TRANSACTION_CLOSURE_INCOMPLETE
  Description of the update of the system for Windows Vista tool
  http://support.Microsoft.com/kb/947821

  Method 2: you receive error code 80070643 0 x or 0 x 643, code error when you use Windows Update or Microsoft Update Web sites to install updates http://support.Microsoft.com/kb/958052
  Registry warning: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft: http://support.microsoft.com/kb/322756/ Knowledge Base

  Method 3: How to fix the Windows Vista and Windows Server 2008 service pack installation issues
  http://support.Microsoft.com/kb/947366

  Note: Run the computer without antivirus software or firewall is a potential threat to the computer; Be sure to activate security software after completing the troubleshooting steps and after identifying the problem.