Cannot install drivers for HP Officejet 4500 G510n-z (stuck control systems)

Similar Questions

• OfficeJet 4500 G510n: I can not install my printer portable officejet 4500 G510n after updating windows 10

  Help please.  I tried for days install my portable printer officejet 4500 G510n to my PC G wireless that runs 10 recent Windows updates.  I tried everything, including the uninstall/reinstall but it is never successful and I understand the different problems every time.  I even tried setting up by USB... always without success.  I don't understand what is the promlem.  AND when I use one of the programs that install fails, it installs a solution for me for windows 8, which does not, of course, because I have 10. I really wish I had a printer again!

  Welcome to the @DLBHJ forums

  I hope to help with installation issues you are having with your Officejet 4500 on Windows 10. Here are some steps to start you off. When you are finished, just reply to me with the results, errors, etc. Any information you can provide will help!

  1 uninstall all printer software that is currently installed.

  2 restart the printer and the computer entirely.

  3. clean boot the computer and restart it: How to clean the boot

  4. when the computer restarts, download and install the software here.

  5. once the printer installed, return to the boot process and re - activate the start up programs.

  I hope this helps and works. Let me know what happens.

  Hit the "accept as Solution" if we reached a solution and the "thumbs up" to say thank you for my help.

• OfficeJet 4500 G510n: a driver for HP Officejet 4500 g510n

  Need to source/install a driver for the Officejet 4500 g510n I plug opportunity after my 510 G packed. With the help of HP printer and scanner doctor finally told me "404 page not found" which starte just me all around alone again to tell Traoré (again), the page is not found. The 510n has a wireless option but is connected to my laptop through USB, and is identified by the doctor Scan from the HP (software) that need to be installed.  Any suggestions? Thank you. Martin

  Hello

  Please download the following driver & software and install on your computer:

  http://ftp.HP.com/pub/softlib/software12/COL32439/MP-80348-2/OJ4500vG510n-z_Full_13_en.exe

  (Note: to connect USB, please do not connect USB cable before the application process).

  Kind regards.

• Cannot install the printer HP officejet 4500 Windows 7

  Original title: HP officejet 4500 printer is not able to install successfully on windows 7 64 bit ver

  Good day to all,

  I have a printer above that connects port router thro is not able to install successfuuly using portable computers that are running windows 7 64 bit ver, uninstalled hp program and delele registry still same.i have try vista laptop with a utp cable from office windows xp and laptop wireless with the computer it works fine. Pls help and your promt response is very much appreciated.

  Moved from Vista devices and drivers Forum.

  Hi Benoit,.

  Good day to you and thank you for posting your query in Microsoft Community.

  I understand that you are unable to install the printer on Windows 7. I'll be happy to help you with your query. However, let me ask you a few questions;

  1. What happens when you try to install the printer?
  2. You receive an error message? If Yes, what is the exact full error message?
  3. You try to install the printer for the first time to Windows 7?
  4. Remember to make no change in the computer before the show, if it was installed before?
  5. What is the brand and model of the computer?
  6. You are able to install the printer to Windows 7 via USB cable? If not, what happens when you connect the printer (via USB) to Windows 7?

  There could be various reasons that you can not install the printer. There could be a possibility if you try to connected the printer for the first time, you need the printer software. If it has been installed in the past, it could be any conflict of third party software. Let's try the methods below and check.

  Method 1: Download and install the latest software of the printer from the printer manufacturer's website and check.

  Enter the exact model and series type the following link and install the printer software.

  Driver downloads &

  Method 2: There are several ways to connect a printer to your computer. An option that you choose depends on the device itself, and whether you're at home or at the office.

  Please see: install a printer

  Method 3: If the printer has been installed in the past, perform the clean boot in order to avoid any conflict of third party software and check.

  Put your system to the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.

  How to perform a clean boot in Windows

  Note: see 'How do I reset the computer to start normally after a boot minimum troubleshooting' to reset the computer starts normally after troubleshooting.

  From now on, try the methods above and let us know the result as well as the answers to the questions. We will be happy to help you further.

• Cannot install drivers for HP photosmart C4640

  Try to install the drivers for HP Photosmart C4640 online I have no CD. After downloading, click on install and I have two such messages: the instruction at "0x7712153d" referenced memory at "0x77c623d8" memory can not be read.

  Second: this computer only has not the necessary software support USB to allow installation of the USB installation.the cannot continue until it is resolved.
  Action required: click Cancel to exit this software installation. To install this device as a USB key. Please consult your computer documentation or documentation of expansion card USB for more information on USB drivers. Please I need help.

  Of devices and printers, remove all installed drivers now for this printer. Unplug the printer from the computer. Reboot the computer. Access

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=228&LC=en&cc=us&DLC=en&sw_lang=&product=3831669#n191

  and download the appropriate drivers for your operating system. Install them according to the instructions. Do not connect the printer to the computer before trhe instructions or guests will tell you of the screen.

  Tom Ferguson

• Adding drivers for HP Officejet 4500 Desktop G510a-f in Windows 8

  I have a desktop HP Officejet 4500 G510a-f. My computer is a gateway HDM! Windows 8 operating system. My system has a virus really bad, so I had to just remove & return to manufacturing to installation so I'm having to put all the hardware, software, and pilots back on. The only one that Im having trouble with is my all in one PRINTER! I have the HP solution for the resettlement of the printerdrivers Center. Usually when I complete, I get a message; "The system cannot find the specified file" then it gives a path: "

  C:\Users\Diana\AppData\LocalTemp\7zS7A17\Setup\hpzshl.ice_s... (Im unable to do the rest if there is no cause its in high bar section.)

  I also received another message simular:

  C:\Users\Diana\AppData\Local\7zS4B42\Setup\hpzshlautor

  Can someone help me as soon as POSSIBLE!

  Diana

  Hi Diana,
  Follow the steps below and check if it solves the problem:

  1 open the Mcafee Virus and Spyware Protection software you are interested in, click on calendar and perform analyses. Click analysis in real time, and then click stop. Select until I restart the PC and confirm by clicking the button turn off.

  Now, try to reinstall the HP software and check if the installation goes as planned.

  If the problem persists, continue following the steps below:

  2. open the dialog box run by clicking on the Windows key and the R key on your keyboard. Type %windir%, and then click OK.
  3. type hpoins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpoins1.old)
  4. type hpwins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpwins1.old)
  5. start the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC /Unregister. in the Run dialog box and click OK.
  6. launch the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC/REGSERVER in the Run dialog box and click OK.
  7. run the installation file and check all difference.

  Kind regards
  Shlomi

• Cannot install drivers for HD Audio win 7 64 Pro Windows default for generic HD driver

  Hi all

  I pray that someone can enlighten me as to how to install the correct audio drivers HD in Win 7 Pro instead of generics.

  The motherboard is an Asus Rampage Extreme and the sound card is a PCIe that accompanies the Board of Directors. The manual calls what it a 'card SupremeFX X - Fi' my system is a dual boot with XP on another partition, the sound works fine, XP, with all the extras, I need.

  If I go to Device Manager and remove the existing driver, and then when I try to install the ones I want, I get a message saying ' cannot find a device supported on this machine. "and the installation program quits.

  Of course when I reboot 7 wants to reinstall what he thinks is right. I'm at square one!

  Once the proper drivers are installed, I can then install the Creative Sound Launcher located in the Tools menu. It gives me a graphic equalizer, a Crystallizer and many other controls for the sound card. I can install these items listed, but none of them will any work without the correct driver.
  They have simply open and refuse to work saying "Device supported by this application is not found on this computer."

  I need a way to install the Asus / drivers Creative instead of the 7 seems to think are "correct."

  Nowhere for the MB manual called the card its a 'creative', but it is quite possible that the software package that comes with it has creative name on it in the world.

  A search of the site Creative shows no drivers for a card with the name that I mentioned above.

  Asus forum do not know more so here!

  Thank you all in advance!

  The dual boot is your problem. Why do you always need XP?

  And you're going to have things the wrong way!

  You need specific drivers XP on this partition and specific drivers W7 on that partition.

  See you soon,.

  Jerry

  HI Jerry,

  Thanks for the reply. I don't know how I mislead you with my ad. I said that the sound is FINE under XP it's W7 who "was" that is rampant in me.

  I eventually found the drivers from the Asus site and program utility that controls the different things like the EQ and others. Note that some of them were not in the right directory and I would have never thought to look under the heading where they have resided!

  I use XP because I have so much software that doesn't work on 7. I am also on disability and can't afford to start replacing and material. At the moment the dual boot is a solution very, I see using a virtual machine in W7.

  Problem solved, I had needed was someone to Asus who has understood my dilemma.

  See you soon

  J T

• Cannot install drivers for xbox 360 wired controller.

  Original title: How can I install my controller wired correctly?

  I'm trying to install the drivers for my xbox 360 wired controller, that I bought from Gamestop on my Toshiba Qosmio x-870 running windows 7 64 bit. When I plug the controller into the usb port, the drivers are automatically downloaded, but for some reason any cannot be installed. I tried the driver downloaded from the Microsoft Web site software. I also tried to uninstall the controller and try again. Any advice?

  Try the controller on another computer and see if it works, or take the controller back and exchange it for another.

  I have one on my computer and installed Windows 7 drivers automatically when I plugged the controller works fine.

• Cannot install drivers for Deskjet 3650 in Windows 7 XP

  I have a HP Deskjet 3650 which is connected through the USB port on my primary computer running Windows 7.  I can print without problem, I have problems sharing this printer with 2 other computers running Windows XP.  I downloaded the drivers for XP and excerpts on the Windows 7 computer.

  On the properties of the printer HP Deskjet 3600 series, I clicked on the sharing tab.

  Share this printer and rendering of printing on client computers are both checked.

  When I click on additional drivers, only X 64 is checked and said yes less installed.

  The two other options (Itanium and x 86) are both unchecked and say no less installed.

  I tried x 86 control and clicking on OK.  Then I am asked to install print drivers and browse to where are printer drivers.  I navigate to the 3600, enu, pilots, win2k_xp folder and see hpf3600k.inf when I click Open, then select OK, I get a selected printer driver not found error that indicates the specified location does not contain the driver for hp deskjet 3600 series (BOBO) on the architecture of processor required.

  On one of the XP machines, I installed the printer software and am not able to print if I physically plug the printer on it.

  On another XP machine, I have installed the printer software, but I download and extract the drivers.  When I click on the Add Printer Wizard and select the printer on the network, it tells me that I'm about to connect to a printer on the computer Windows 7 and says that it will automatically install a print on my machine driver.  I click Yes to allow him to continue and he told me that the server for the hp deskjet 3600 printer doesn't have the installed printer driver and I can click OK to search for the correct driver.  I click OK and navigate to the folder I extracted the drivers to and see that hpf3600k.inf is located in the folder and click OK and I get a window of driver error install that says that Windows cannot locate a suitable printer driver.  To help locate and install a suitable driver, contact your administrator.

  So, it seems to me that the driver that I downloaded on the site of hp for Windows XP is not the correct driver, am I wrong here?

  How can I get this printer to print on all 3 computers work without having to move from one to the other.  The printer must be physically connected to the Windows 7 computer, as the other 2 are in children's rooms.

  Try the following: on the machine XP go to the printers and Faxes folder, add a local printer, printer, create a Port, Local Port, \\Computername\Printername (use the name of the actual share of the shared computer and printer), OK, and then click disk and point to the directory where you unzipped the driver XP.

  On the XP machine, you have already installed the driver do the following: go to the printers and Faxes folder, right click on the Deskjet 3650, select Properties, Ports, the port, Local port Add, new Port, \\Computername\Printername (use the name of the shared computer and printer), OK.

• Qosmio F10 - cannot install drivers for some hardware components

  Hello

  I decided to reinstall Windows XP SP2 again, given that the laptop was full with a lot of garbage and slow work. I've done it before, and it has always worked very well, but this time it does not recognize my sound card, network card, graphics card, etc., one could say that all the material.

  I used my tools and Utilities CD after installing Windows and installed first of all the chipset driver, rebooted my laptop, I tried to install my sound card, graphics card, network card, but nothing happens. Still, he does nothing. I really have no idea what is wrong, always worked before.

  Thanks for your help

  Make sure you use the correct drivers!
  On the Toshiba driver page you will find the drivers for the Windows MCE and Windows XP.
  Use the XP drivers!
  More important information:
  The drivers must be installed in the correct order! I found on the page drivers Toshiba an installation instruction. Please follow these guidelines! It of necessary for installation correctly.

  Dude good luck

• Cannot install drivers for laptop

  HP service center formatted my laptop using the windows ultimate version 7 and has not installed any drivers, no recovery disk was given with the laptop, I downloaded all the drivers from the hp site but none of them is installation, the installation process ends sharply between the two, I recently upgraded to windows 8 to solve the same but I couldn't install the software , I tried for a long time to resolve, but can not please help

  kunal_iaf,

  You will have to contact HP support for your region. They should be able to access the control system to get an idea of what happened in the order. I know that in the United States, the market the best shipping option may take 1-2 weeks for the worst case scenario. Once again, the procedures of what past doesn't seem to be a real HP repair/service process. They should probably be aware of what has happened to check that the repairs are going as they should.

  ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  halfast,

  Try this document from Symantec. It addresses the exact error that you receive. It has a link for additional support documents should it not work, but it should do the trick.

  Let me know what happens.

• Cannot install drivers for HP Photosmart 7550 inkjet printer

  Original title: HP Photosmart 7550 Inkjet Printer

  I am trying to add my old hp photosmart 7550 printer to my computer hp laptop G72 and Assistant said is not 64-bit capable w, but a pilot alternet is availible. How can I find this driver is available for this printer work with my laptop?

  Hello
  1. who is the operating system installed on your computer?
  2. What is the exact error you get when you try to install the printer of 5 drivers?
  3. did you of recent changes to the computer?

   
  If you are using Windows 7, you try to install in compatibility mode printer drivers. Check out the following link.
  Make older programs in this version of Windows
  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows
   
  Alternatively, you can contact HP support to find the latest drivers for the printer. Check out the following link.
  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=72892&lang=en&cc=us&prodTypeId=18972&prodSeriesId=72890&TaskID=135
   
  See also:
  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers
   
  It will be useful.

• HP Laserjet MFP M127fn Pro: Cannot install drivers for printer HP Laserjet Pro MFP computer M127fn on the new laptop from acer windows 10

  This is my third attempt failed to install new drivers for the Laserjet Pro M127fn MFP printer on my laptop Acer windows 10 OEM. I used the HP installer with no customiztion of components (the default recommended) with USB cable connection. It goes up to the product configuration step 99% and then gives the error: "an installation operation took too long to run. It is a fatal error, preventing the use of the product. Restart your computer and run Setup again. If the problem persists please consult product suppprt web site of your product... » »

  I also tried to use interface devices and printers after restart the computer by selecting Add Printer option, it seemed to have installed the printer but it couldn't print the test page. Any help will be greatly appreciated.

  Thank you.

  Hello

  Printer navigate through the Setup menu using the left and right arrows and locate the Service menu.

  Search for HP Smart Install option in the Service menu (it may appear and may not be no depanding on the version of your printer), if it is there, select Disable for HP Scmart Install.

  In your PC click on the right button on the start menu and select Control Panel, then select View devices and printers.

  Do not forget to remove any icon (the M127 or any other driver HP) HP printer by clicking the icon and selecting Remove the device, and then restart the computer.

  Go back to the devices and printers any queue remains left by clicking once, then select press the print server properties in the top menu bar.

  Select any listed HP printer driver and select Remove, make sure to select the 2nd option to delete the printer and its driver package.

  From the control panel home, type "change device Installation settings and open the option, then select No and confirm with OK."

  Now, try to reinstall the most recent drivers and check for the difference.

• Cannot install drivers for AIO Printer 924

  I recently bought a new PC running on Windows 8 (took me a while to get used to!) and wanted to connect my Dell AIO 924 printer/Scanner to the new PC.  I followed the advice given - the PC configuration change settings - devices - add a device.  I put the CD of driver & utilities belonging to the printer in the DVD/CD drive.  When I check on devices, I think the 924 AIO listed but it says driver is not available.  I also tried to install using the Control Panel - Add a device, but after research it just says not: no devices found. It detects I have a scanner connected to the computer but not a printer.

  jean9,

  Try this procedure and see if it works...

  To the best of my knowledge, window 8 is not supported for this printer. You can try this, it may or may not work...

  First run, delete print jobs to eliminate any print job stuck in the queue.

  Unplug the printer.

  Download and run the patch (cleaning printer utility) until it prompts you to restart your computer.

  Restart your computer. Make sure that the printer is deleted. Driver Manual printer removal

  Download the 32-bit drivers for Windows 8 32 bit Vista or 64-bit drivers for 64 bit Vista Windows 8. Install the Vista drivers in Vista compatibility mode, you will get a message, the printer is not connected. Connect the printer at the moment (power on).

  You will find links to the patch/drivers to...

  Dell 924 Photo-All - In - One Printer owners thread (W7)

  Don't forget the programs anti-virus and firewall will block communications. If no antivirus program is installed, Windows Defender is the default virus program. Try to read it, printer let past Microsoft Essentials/Windows Defender

  Rick

• OfficeJet Pro 6830: Macbook Air cannot install drivers for Officejet Pro 6830

  Hello

  I'm really stuggling now and its quiet frustrating as im a student and I have papers to write.

  I tried to download the previous software for os 10.10 driver for my macbook because it doesn't have a disc drive.

  He kept going upward and upward is not my broadband speed, I checked and no downloads in one day an age as it takes DAYS Yes he said days!

  So I thought I'd fire my PC and download the drivers on my massdrive so I can install it on my macbook... 10 minutes, I waited 10 MINUTES to 0%!

  Someone please help me I just want to use my printer that I bought! Ive even tried to do it via the ip address to configure this way and failed spectacularly!

  Jessica

  

  Jess, you are welcome! I am very happy that I could help!

  If you have just a second fast fast, please click the button "accept as Solution" on my last post here, if others can find our messages easily in the forums too, in case they run into the same problem.

  I thank you and wish you all the best!