Cannot install elements 11 after downloading the upgrade. Any ideas?

Similar Questions

• ThinkPad R60 cannot install Windows XP After erasing the HARD drive using the lenovo diagnostic utility

  WinXP pro Setup cannot find that any installed HARD disk so cannot install windows. Unfortunately after many attempts to use rescue and recovery to restore the factory settings and for some reason constantly default... After leaving another utility popped up giving me the opportunity to erase the HARD drive and so I did... After fact as well and all I had was a blank screen, no windows more or no matter what utility to reinstall windows, then I used my winxp pro installation CD, but the program installation would continue not after a certain point by saying that the installation did not find any HARD disk installed. followed by "ensure that any disk HARD r turned on and correctly connected, and that no matter what material associated drive configured correctly, this may involve running a manufacturer provided diagnostic or Setup program. Clearly it took me by surprise. What was supposed to be a cut to white erase and reinstall now me baffled and angry. Formats the HDD of the solution? If so why didn't not the usefulness of lenovo do... If not, what is the problem? Someone help pls

  Welcome to the forum!

  Go into the BIOS (F1 at startup), set the "compatible" SATA mode (NO AHCI), then press F10 to save and exit, and you should be all set.

  Good luck.

• MacBook pro cannot install adobe acrobat pro download the DC file. Why?

  I recently bought the DC pro for mac adobe Acrobat. I downloaded the file but I couldn't open the file to install it. I need help to install the software.

  Thank you.

  I've solved the problem by rebooting my computer.

  Kind regards

  Michaelayo

  Saturday, November 14, 2015 at 03:02, RahulTyagi_, [email protected]>

• Print spooler problems and cannot install printer driver after Windows 7 upgrade (80070706)

  I just upgraded from Vista to Win 7 Ultimate.  Once installation is complete, I tried to update the drivers and install the latest updates.  Everything worked except for HP LaserJet 4 L driver.  As a first step, whenever the driver tried to install it, the print spooler service may stop working, and the driver installation failed with error code 800F0246.  I then removed everything from the spool directory, rebooted and tried again.  This time, the print spooler service has not prevented from working, but the driver still does not work with error code 80070706.

  I can't find the information for this error (80070706) anywhere on the web.  Any help would be appreciated.

  More information: the HP LaserJet 4 L printer is connected via a parallel to a prolific USB docking cable.  Windows recognizes the printer as the IEEE-1284 device, but says it needs driver to work.

  Update: I was able to manually add the 4L driver using the print server properties dialog box, BUT if I try to add a printer after that, I get "the print processor does not exist.  If I try to add a printer without installing the driver, I get ERROR 0 x 00000002.

  Everything is running as an administrator.  It worked perfectly under Vista.

  Thanks for these links, but these proposals did not help nor solve the problems.

  After a long and painful journey through the registry, I determined that this workstation was already installed 3rd party software, called "Pharos".  Apparently, this software was redirecting the default print processors and was clearly not compatible with Windows 7, although the installation of Win 7 never mentioned a problem of compatibility.  Once this software has been removed, and all the remains erased from the registry, there is now no problems with printers or print spooler.

  In the future, it would be useful that Microsoft has actually provided certain types of useful information when these accidents occur.  Cryptic error numbers and unnecessary event log entries did not provide useful clues.

• Login screen does not load and cannot access my desktop after downloading the Microsoft Fixit tool

  Please can someone tell me how to get the login screen / print this page, because I do not that! I tried to use the command prompt, system, 'lusrmgr.msc' recovery option and the message comes up, "... is not recognized as internal or external command an executable program or a batch file.

  • In fact, what triggered this condition? Install new software?
  • You wrote before that you could not use the restore points. Have you tried all, including those who become visible by ticking the ' Show more restore points?
  • The problem when you press F8 during startup and select one of the following options:
    -Safe Mode
    -Last known good configuration

• Cannot check iOS 9.3 during the upgrade process. When there is a good connection internet, says no internet. Tried more than 30 times, even after reboot. Any suggestions?

  Cannot check iOS 9.3 during the upgrade process. When there is a good connection internet, says no internet. Tried more than 30 times, even after reboot. Any suggestions?

  You chose the option in iTunes to download the firmware first and install it in a second time after that?

• Restore Windows 7 academic downloaded the upgrade after crash HD

  I had a HD crash. My 64-bit machine was running Windows 7 Ultimate, bought a school upgrade and downloaded. W7 disappeared after the crash. I had the legacy Vista installation to a different drive, but cannot see how to download the upgrade or recover activation key again. What's worse, I can't reinstall my Office 2010 (which was installed on a disk survivor after upgarding to W7 so no longer works) because the Setup program is unable to remove the existing version of Office 2010. Even the fixme utility cannot find Office 2010.  Any help gratefully received, any necessary information provided with happiness.

  Thank you

  J.

  First of all, you need get the product keys for Windows 7 Ultimate and Office 2010. They must have been sent by email you somewhere (with a bit of luck you have deleted emails).

  Then you should download Windows 7 Ultimate 64 bit .iso and the correct version of Office 2010 that should be in my wiki Microsoft Downloads:
  http://en.community.Dell.com/support-forums/software-OS/w/microsoft_os/Microsoft-Windows-and-Microsoft-Office-downloads.aspx
  This wiki should have full instructions to create media. My other wiki A Clean install of Windows 7:
  http://en.community.Dell.com/support-forums/software-OS/w/microsoft_os/1434.aspx
  should be used as a base to install it, but some measures should be modified slightly if you use not a Dell computer, which is to get the drivers from the manufacturer's website is opposed to the Dell one and another key opposed to F12 may be used in a non - Dell PC.

• Firefox 4 is unable to install add-ons. After download the 'installation' bar stuck in the beginning and never ends.

  Firefox 4 is unable to install add-ons. After download the 'installation' bar stuck in the beginning and never ends.
  After that I updated to 3.6, FF4 to see any of my previous modules.
  When you try to install the new, I see no error dialog box or message, just install bar is not going anywhere.

  To anyone out there yet with this issue.
  The solution that worked for me was to create a new user profile.
  Give it a try, if it works you can just move your settings and other things more.
  Oli

• After downloading the program, I can't install them. Error: 'path is not a valid Win32 application ".

  After downloading the programs I can't install them

  Hello

  1. which site Web you downloaded the program from?
  2. you use a download manager to download the program?
  3. what web browser do you use?
  4. don't you make changes on the computer before the show?
  5. were you able to install other programs on the computer?
  6. what program are you trying to install?

  
  Method 1:
  You can try the steps in the article of the supplied knowledge base and check.
  How to solve problems when you install or uninstall programs on a Windows computer
  http://support.Microsoft.com/kb/2438651
  
  Method 2:
  You can also perform a clean boot, and then try to install the program and check.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the Knowledge Base article.

  Method 3:
  You can run Microsoft Safety Scanner in Mode safe mode with network and check.
  Check out the link:
  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode 

  You can run a Microsoft security scanner to make sure that the computer is free from virus infection:
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  WARNING:
  If you run the antivirus program that is infected by the virus scan will get deleted. Therefore, reinstall the program. Also, if files and folders are affected by the virus, while they might even get deleted.

• I have tried to download/reinstall CS5 that my laptop current doesn't have a dvd drive, but even after downloading the files, it will not install

  I have tried to download/reinstall CS5 that my laptop current doesn't have a dvd drive, but even after downloading the files, it will not install

  When you ask a question you will need to provide some basic information

  Mac or Windows and EXACTLY what version of the operating system?

  Recent Mac AND Windows operating systems have been known to cause problems "weird."

  Using a full account of computer administrator with read/write permission?

• I'm trying to install Adobe CC on computer 2, a Macbook, and after downloading the desktop CC app I double click in the intall. When it seems to be done to install I'll double-click on the icon of the ourobouros upstairs and I'm rewarded with spinning

  I'm trying to install Adobe CC on computer 2, a Macbook, and after downloading the desktop CC app I double click in the intall. When it seems to be done to install I'll double-click on the icon of the ourobouros upstairs and I am rewarded with the spinning of beach all dead. Any suggestions?

  Hi,

  Please see the below help document to solve the problem:

  Does not open App | Wheels of progress turn continuously

  Kind regards

  Sheena

• After that the upgrade of os josemite cs4 applications will not work. Message that I need to install the legacy java SE 6 runtime. Is it necessary to set the loading application?

  After that the upgrade of os josemite cs4 applications will not work. Message that I need to install the legacy java SE 6 runtime. Is it necessary to set the loading application?

  Found the answer:

  Java for OS X 2014-001 includes improvements to the installation and replaces all previous versions of Java for OS X. This package installs the same version of Java 6 included in Java for OS X 2013-005.

  installed above and it works now

  Blessings

• __lost my photo of microsoft program when I tried to download the upgrade essentials - error loading C\program can windows live \photo gallery\WLXphoto Gallery\WLXPhotoViewer.dll

  Original title: __lost my microsoft photo program when I tried to download the upgrade to essentials

  I tried to download the new update essentials download and three quarters of the way through, he stopped.
  The download was already about this. He said then; "put everything back as it was" when he did. I have
  lost my photo program. It now gives you a nag screen which keeps comeing like:

  Error loading C\program can windows live \photo gallery\WLXphoto Gallery\
  WLXPhotoViewer.dll
                            
  The system cannot find message for message number 0 X %1 in the message file

  0 x %2

  In addition, whenever I boot, the screen shows: "ready to download microsoft essentials" restoration is not
  the ride.

  After starting, the system leaves me alone until I try to open a j - peg or some file im trying to open.
  then the cycle starts again. further investigation, saying that I lost a dll.

  I tried to find microsoft photo viewer download to try to repair the photo of microsoft program and concluded that the
  only way I can do that is by downloading the essential upgrade download because it is attached to it.
  In order to accept the upgrade, the photo program should probably be repaired, as a thought as microsoft solve this Center says there is no problem. all other articles on the net is also not related or doesnot show how to fix the missing dll if it is the problem.

  Hello captain_crunch0,

  In addition to the steps proposed by Ajay, you could try and download and reinstall all Windows Live Photo Gallery 2011.
  This link should be just for the photo gallery. http://explore.live.com/Windows-Live-Photo-Gallery?OS=other

  Please reply back and let us know if this can help.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Cannot install Adobe CS6: reboot of the machine may be pending

  I just bought a new laptop with Windows 8 OS. After downloading the Adobe CS6 files, I extracted the files on my desktop. When I tried to install, install Adobe says that it has detected that a reboot of the machine may be waiting. It is recommended that I quit the installer, reboot my computer and try to reinstall. I did, and the same note appears. Choose to ignore and operating facility?

  Another faced the similar problem month someone last (in one of the threads), and he has ignored the note and continues the installation. Then his Photoshop cannot work. Others have suggested using the cleaning of Adobe for him tool but no resolution of this thread. In any case, mine is a new laptop, and there is nothing to clean up. I tried Cleanup but nothing to cleanup.

  What should I do?

  Thank you.

  Siang Yu

  I received the same notification when I installed CS6 on my machine.  I restarted Windows and got the same message, and then choose 'Ignore' and the software successfully installed.

• After that the upgrade of my URL bar no longer displays the Protocol.

  After that the upgrade to Firefox 7.0 my URL bar is no longer shows me what protocol is used when you use http port 80. How can I turn this feature on?

  The Protocol (http://) was removed from the URL in the location bar for pages http:// only. https:// pages will always have the Protocol. This can be confusing for some users. There is also a bug known, where if you copy the URL after selection of the awesome bar dropdown (but before loading the page) it does not include the http:// part.

  Users can revert to the old behavior by setting browser.urlbar.trimURLs to false in about: config

  1. type of topic: config in the URL/address bar and press the Enter key
  2. If you see a cautionary, accept it (promise to be careful)
  3. Filter = browser.urlbar.trimURLs
  4. Double-click the pref in the lower panel of toggle it on 'false' OR , do a right-click on the pref in the lower panel, then choose "Toggle" switch it on "false."
  5. close the topic: config tab

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  Not related to your question, but...

  You may need to update some plug-ins. Check your plug-ins and update if necessary:

  • Plugin check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
  • Adobe Shockwave for Director Netscape plug-in: install (or update) the Shockwave with Firefox plugin
  • Adobe PDF plugin for Firefox and Netscape: Installation/update Adobe Reader in Firefox
  • Shockwave Flash (Adobe Flash or Flash): updated Flash in Firefox
  • Next-generation Java plug-in for the Mozilla browser: install or update Java in Firefox