Cannot install the modem "Error 1722" MC760
OT: "error 1722".
Hello, I got an old mobile broadband Virgin to modem, the last time I'd use, I had windows XP then a crash and installed windows. I then discovered my mobile vvirgin modem broadband was not good. The modem operating system is a plug-and-play and nothing happen when it was plugged after 2-3 weeks, we are arrived at the conclusion that it was ba d.But my VM support support group helped me download the software modem of the MC760 en on the VM site, which went well but the modem still does not work. I bought another mode of MC760 even type, pluugged in my computer and everything went very well, the instructions arisen on how to download and launch. Installation is going well until he stopped and said another more recent version of the modem was already installed and had to be removed. Then I have to remove the version MC760 my support team help install me and got an error message 1722 saying it cannot be uninstalled I do with my support, I did and they said that's a problem installing Microsoft contact, or that I need to contact Microsoft. at the bottom of the message it says remove Virgin Mobile Installation of the driver. Now how to get out the last version of the MC760 my computer modem so I download and use the older MC760 modem. Help
Contact Virgin mobile.
Tags: Windows
Similar Questions
-
Cannot install the update error Code Ox800B010B
Original title: cannot install the update
Cannot install the update KB2686827
Error Code Ox800B010B
Hello
1 have had any changes made on the computer before the show?
2. What is the full and exact error message?
3. when exactly you get the error message?
4. the problem occurs for all the updates?
Method 1:
I suggest that return you the item and run Microsoft fix:
Diagnose and automatically fix common problems with Windows Update
http://support.Microsoft.com/mats/windows_update/
Method 2:
Test the problem in clean boot mode.
How to configure Windows XP to start in a "clean boot" State
-
Cannot install the update error
I'm trying to update my iPhone 6 16 GB running iOS to iOS 9.3.1 9.2.1 but when I try to install the OTA update it says "cannot install the update." How could I solve this problem? The contact ID is not available because the unit is gray with a white screen and a contact ID button or space, which affects the update process?
I would try to update via iTunes
Connect the device using a cable to a computer (PC or Mac) running the latest version of iTunes 12.3.3
The time that the phone is detected, choose software update
If the phone is not detected - see here
If iTunes does not recognize your iPhone, iPad or iPod - Apple Support
OR
Please take a genius appointment at an Apple Store, or select another authorized service provider.
-
Cannot install the Modem Satellite Pro A200 XP driver
I'm a local network for Newbold College administrator. New mobile A200 and we need XP Pro on some of them. I tried to install the modem driver as one of the last drivers downloaded from the website of European support. I also tried the Canadian site as well.
The driver installation program does not appear to do anything. I tried to manually install the driver for a Windows modem Agse/Toshiba software modem, but I have com port problems and I can not quire of the modem.
Can someone help me please!
Hello
What to say; I checked the driver Toshiba Europe page and found all the drivers XP necessary and important for the Satellite Pro A200.
Please note that the European driver Toshiba page provides drivers XP 3 different satellite Pro A200 series! There are PSAE1, PSAE4 and PSAE7 series.
Please choose the right!In addition, you will find a txt file of installation instruction on the page of Tosh.
In this file, you will find a good and important driver installation order! Please follow these steps!I put t know exactly why you get the modem com port problems but I guess a new installation of XP and the driver should fix this strange problem.
Good luck
-
Cannot install the modem, fails and restores
Please can you help me
Please can you help me
I have a high FUDJISU Tower, a bit old but still good features although sudenly it won't install my modem
It will go almost all the way and it starts to pull back on the last piece!
What can I do?
Thank you
Irene
Hello
4 K you an error during the installation of the modem fails?
2. What is the operating system installed on the computer?
If you have Windows XP and check if the problem persists, perform the steps in the article. http://support.Microsoft.com/kb/883356Also check the links below.
Hope that helps. -
Cannot install the update error KB2718704: 0x8007F064
Original title: XP, error Code (KB2718704) install failed: 0x8007F064: after that I tried to solve this problem, because as far as I know, but still, there is no, then how should I do?
Microsoft Update tried to install the update for Windows XP (KB2718704) whenever I closed my computer, but it could not include my manual installation.
Hello
Method 1: Run the fixit
Check out the link:
The problem with Microsoft Windows Update is not working
http://support.microsoft.com/mats/windows_update/.
Method 2:
Check out the link:
You cannot install some programs or updates
http://support.microsoft.com/kb/822798.
Warning: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
How to back up and restore the registry in Windows XP
http://support.microsoft.com/kb/322756/.
You can ignore the 7 method to perform the upgrade in-place.
Method 3: Scan SFC
SFC scan will find all missing or incorrect system files and repairs them.
File system (CFS) Checker
Method 4: Install the updates to the clean boot
Step 1: Clean boot
When the computer starts to boot, programs non-Microsoft will not be started and would avoid any interruption of their share.
Check out the link:
How to configure Windows XP to start in a "clean boot" State
http://support.microsoft.com/kb/310353.
Note: To set the computer back to start normally, use the procedure How to configure Windows to use a Normal startup state in the same page.
Step 2: Install the update manually
Check out the link:
Update for Windows XP (KB2718704)
http://www.microsoft.com/en-us/download/details.aspx?id=29975.
-
Cannot install the updates, error #0 x 80244004, please help
Message bed site has encountered a problem, cannot display the page you are trying to view. This happened after I installed the window update agent 7.4.7600.226 on June 21,2012. No updates since then.
Please note that the version of WUA 7. 4. 7600. 226 is the old version that was supposed to be automatically updated on June 21 at the new and current WUA version 7. 6. 7600. 256
The problem that you see now may occur when there is a version mismatch of the file with the Windows Update Agent files, which is a mixture of old files with the new files. This is due to an installation "or damaged."
We would be able to help you better if you provided the windowsupdate.log file. Look for error codes or entries that are similar to the. -.
Setup FATAL: error 0 x 80070005 when you try to open the file C:\WINDOWS\system32\wuapi.dll
Installation FATAL: ProcessDelayedCopies failed: 0x80070005
The FATAL service: failure difficulty starting the service registration: 0x80070005OR
FATAL: update required for C:\WINDOWS\system32\wuweb.dll: target version = 7.4.7600. 226, required version = 7.6.7600. Installation of 256 * IsUpdateRequired = Yes
Especially the wuweb.dll c:\windows\system32\wups.dll wups2.dll, c:\windows\system32\wuapi.dll files.
You can try to re - register the WU files > http://support.microsoft.com/kb/958053
Good luck and please let me know if problem solved.
-
Printer HP MFP M127fw cannot install the hardware error on xp sp3
Hello
I'm just impossible to install MFP M127fw on XP SP3, either by pilots or by using the installer Hp. whenever I try to install it says "an error has occurred during the installation of the unit", "the system cannot find the specified file. scanning functions are however works well.
Prompt response will be highly appreciated
Thank you
solved. She needed old .net Framework 3.5, I had 4 in my pc.
Thanks for the replies
-
Cannot install the update error KB973768 is absent from the components to install
Microsoft Update will not install. I ran to the Microsoft 'Fix it' and not the update install always. Error indicates the KB973768 missing components to install. How can I fix it?
OT: KB973768
Hello
Try these steps and let me know the status.
Method 1.
Here is a little bit information about error 0x8007F0F4:
http://support.Microsoft.com/kb/958051/en
Registry warning
To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
322756 (http://support.microsoft.com/kb/322756/)
How to back up and restore the registry in Windows
Method 2.
You can try this difficulty (reset Windows Update components):
http://support.Microsoft.com/kb/971058
Method 3.
Have you tried to download the update and install manually (the good language)?
http://www.Microsoft.com/download/en/details.aspx?ID=74
I hope this helps.
-
Cannot install the updates, error 0x8007F0F4
I can't download the update... tried KB2686509 on several occasions. Get error 0x8007F0F4
You may receive a "0x8007F0F4" error code when you try to install the updates on the Windows Update Web site or the Microsoft Update Web site
http://support.Microsoft.com/kb/958051 -
Cannot install the updates, error 0000646
I get an error message for the updates of security Windows Microsoft 2007 (KB2289185). I get the error message 0000646? Is there a solution for this?
Error code '0 x 80070646, ' '646', or '1606' when you try to install Office updates
Suggest you download and save the fix it.
Then close all open programs and browsers before running MSFix it 50461.msi.
-
Cannot install the printer error Code 707
Original title: Error Code 707
Hello
I am trying to install a Kodak ESP C315 printer and continue to receive the error code 707:
'D:Setup\KapMaster.exe"/m.\CompanyName="Eastman Kodak Company' code '1033' / X = 0 Y = 0. Can you help me please? I wasn't able to find the answer to online registration.
Hi BarbaraKincaid,
· Did you do changes on the computer before the show?
· What version of the operating system is installed on the computer?
Follow these methods.
Method 1: Temporarily disable the security software .
Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.
Method 2: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.
Note: After the boot minimum troubleshooting steps, follow the link step 7 to return the computer to a Normal startupmode.
For reference:
Install a printer
http://Windows.Microsoft.com/en-us/Windows7/install-a-printer
http://resources.kodak.com/support/PDF/en/manuals/AiOPrinters/ESP_C315/ESP_C315_UG_en.PDF
-
Cannot install the updates, error 0 x 641
Original title: KB2686828, KB2656407, KB2604110, KB2604092, KB2656369, KB2598343, KB2604111, KB2538243, KB2251487 all the update Failed error Code0x641
Cannot download
updates to KB2686828 KB2656407 KB2604110 KB2604092 KB2656369 KB2598343 KB2604111 KB2538243 KB2251487 Office 2003 Service Pack 3 (SP3) and KB907417
and software such as AVG
Original title: Update error Code0x641 failed
Adding to the suggestion of Srinivas KR you also try the following
UTC/GMT is 06:20 Wednesday, June 20, 2012
-
Original title: cannot install my printer error message
I am trying to install my printer to dell v505 from the factory disc and get this error message: failed to create the object print dell v505 printer is not compatible with a polcy enabled on your computer that blocks NT 4.0 drivers (1930)
Any help, need a lot.
Hello
1. what version of Windows are you using?2 did you the chnages in the computer before this problem?I would suggest trying the following methods and check.Method 1: Run the fix, install the printer and check
Diagnose and automatically fix problems printing and printer
http://support.Microsoft.com/mats/printing_problems/Method 2:Error message when you try to connect to a printer in Windows Vista: "the printer driver is not compatible with a policy enabled on your computer that blocks NT 4.0 drivers.
http://support.Microsoft.com/kb/931719Method 3: Install the printer in a clean boot state.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7.
http://support.Microsoft.com/kb/929135
Note: Please, go to step 7 of the Kb to maintain the computer to normal startup.You can download the latest driver for your printer from the link below.
http://www.Dell.com/support/drivers/us/en/04You can also check:
Printer driver is not Compatible if a policy is enabled on your computer.
http://support.Microsoft.com/kb/282011Error message when you try to connect to a printer in Windows Vista: "the printer driver is not compatible with a policy enabled on your computer that blocks NT 4.0 drivers.
http://support.Microsoft.com/kb/931719 -
In my portable automatic update, cannot install the update for windows Vista (KB972145) he gave the Code 80004005 error message and error code 8007000D twice. How can you help me solve this problem
0X8007000D ERROR_INVALID_DATA
Try to manually download the update and installation
http://www.Microsoft.com/downloads/en/results.aspx?FREETEXT=KB972145&displaylang=en&sType=s_basicIt will not appear in your history after a manual installation, but it will show the updates installed in view area. TaurArian [MVP] 2005-2010 - Update Services
Maybe you are looking for
-
Disable the limit text 70 characters on my iPhone 5 c?
When I get a text of a person on an iPhone-no, it is broken down into 70 pieces of character and I am charged with 70 characters instead of 160 characters (I don't have unlimited messaging). Apparently, this has nothing to do with the carrier and imp
-
Connection Bluetooth on Satellite A300 problems
I have a satellite A300 with 32-bit Windows vista. I am trying to connect my cell phone to the computer and cannot connect. The phone has bluetooth on and visible. I can open "bluetooth devices" on the Control Panel, but when I click on 'Add a blueto
-
Minimum external resistance NI 9269
Hello I'm trying NI 9269 voltage output. According http://digital.NI.com/public.nsf/allkb/5FDA9006283BB603862578B5006A80E7NEITHER 9269 can take the smallest resistance at 10 k ohms (it's a condition for NI 9263) but the value is not reported. What is
-
Is LabVIEW 2015 for Mac?
We have a license for LabVIEW 2015 and received the software on a USB Flash drive. I have used successfully to install LabVIEW on my Windows PC, but am confused how to install LabVIEW on a Mac. When we arrived LabVIEW on separate DVD, there was a D
-
my microsoft security essentials protection that is free was hijecked
My microsoft security essentials protection that is free was hijecked by something to try to sell me a security system and won't let me get online or any what internet.