Cannot install the Modem Satellite Pro A200 XP driver

Similar Questions

• Cannot install WinXP on Satellite Pro A200 - No. HDD

  Hello

  Please can someone help me. I just brought 52 portable Satellite Pro A200. They come with pre-installed Vista, but I want to wipe and install Windows XP. However, I have a big problem - when I put my XP CD in and start it, then click on enter to continue, he tells me that the Installation cannot continue until Windows cannot find any hard drives (although I can boot under Vista so I know that the HARD drive are ok).

  Thanks for looking,

  Matt Courtman
  Cromwell Community College, UK

  You must install the Intel Matrix Storage Manager.
  This driver can be found don page Intel:

  Please also check this thread. It s very useful:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=26040

• Slow WLAN connect to the router - Satellite Pro A200

  I have a Satellite Pro A200 - after starting the laptop she used to find the router wireless in good time, but now it seems to have slowed on the right and it may take a few minutes until 1/2 hour phone to find the router!

  This doesn't seem to be a signal problem because when the router is found that I get a signal strength full 5 bars. Connection to the laptop the router with a cable shows that no problem also that the connection and internet access is no problem.

  I do not understand why the laptop won't find the router faster and you would appreciate the help in the understanding of the problem and how to resolve the situation.

  I don't have a lot of technical knowledge so please keep in mind when replying

  Thank you

  Mike

  Hi Potter (maybe Harry?)  ;)

  You can easily find what WiFi card has been installed in your laptop.
  More details can be found in the *-> network adapters Device Manager *.
  Check this out and you'll know what driver WLan is required!

  _Regarding the question with your BIOS; _
  This error is known to me, always happens if you n t unpack the BIOS package correctly!

  What you need is a WinRAR or WinZip program.
  I prefer WinRAR and it helps to unpack all of the BIOS update.

  If you use the Vista operating system please check that another thread of forum on the same issue;
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=123140𞄄

  Good luck

• Satellite Pro A200 - hard drive has lost half it's memory

  I have a toshiba Satellite Pro A200 on Vista. Vista came preloaded and I not all disks for it. I got it from the new (Sept 2007). The hard disk is divided into units. Recently my C drive has filled competely and I now no space left (went 55gigs) I store some data in this drive. All my multimedia elements (music, photos, and other files) is in my E drive. I have to run C Cleaner whenever I start in order to have enough space for the operation of the computer. I also remove all but the last restore point in order to function.

  I am at my wits end and think I must have a virus or something. Is there a way to restore the computer to the 'new '? I have all my files backed up on an external hard drive, so I don't mind from scratch. Not keeping in mind I have no install discs as Vista came preloaded.

  Can anyone help? Please, I beg you!

  Hello

  If you don't have a recovery disk, you can order from Toshiba for the money. Otherwise, you can get copy of Windows and installed with the drivers of Toshiba (http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp)
  Then, you mentioned that hard drive has lost half it's memory, tell you if it was ok before but not available? Please check disk management, utility of the Panel. What is shown here?

• Cannot install Win 8 - Satellite Pro C660 does not detect HARD drive

  Hello

  My HARD drive died, so I decided to upgrade my Satellite Pro C660 - 1 9 to an SSD.
  I made a USB bootable with Win8 and starts very well.

  The problem is that it does not detect my SSD, so I can proceed with the installation.
  SSD appears in BIOS but not in Windows Installer.
  He said that there is a missing driver.

  I downloaded the AHCI drivers (XP, only ones available) and even in this case, after you have selected the only rider that appears, it says no new device found.

  I tried to change the SATA from AHCI mode to compatibility mode and it's the same thing...

  What can I do?

  Thanks for the help.
  Best regards
  Bruno Moreira

  More old Windows XP need a driver AHCI Intel's but I think this isn't a problem with SATA driver missing because as far as I know Windows 8 as well as Win 8.1 already contains the drivers to recognize the SSD or HARD disk drive.
  In addition, the installation of the OS should be possible even if the driver would be added for this procedure, you must use the "compatibility" mode
  As you say, the compatibility mode is not working too, so I think there is another problem.

  However, page driver Toshiba also provides a driver Intel RST (Intel Rapid Storage Technology) (Windows 8 - updated) you can try to add during the installation of the OS.

  But I m wondering if you would be able to install this Win 8 on common SATA HDD.
  Have you tried to format the SSD using a different computer, then install Win 8?
  Give it a try.

• Cannot install windows on Satellite Pro A40

  Hi I read through all the posts and I can't seem to find an answer.

  My problem is that...

  I tried to install windows from a full version and when I want to install windows on a partition it fails. If I try to delete the partition, it fails. If I use the recovery discs - Option 1 not entered completely load - looks like Gdisk? error and then a ghost. Option 2 loads but when I go again to install fails.

  I can't find an option in the bios to prevent disk access - as a protection against boot viruses. the key under the keyboard, I tried in both positions.

  I removed the battery to see if it is a power problem.

  I tried using the options of recovery in win xp - but cannot access the drive

  The really strange thing is over the option of recovery disks 2 - the size of the disk is larger than the actual size of about 1/3?

  The system initially went down while it is connected to the internet - the only option I can thing of is a power surge came down the line and has damaged the motherboard or hard drive. As it happened to a desktop system - blew 3 modems and a UPS before we have located the problem.

  Help!

  Hello

  tried to check and format the drive with an external tool? I'll give you a suggestion: try the "ultimate boot cd" which has many tools also some tools for the maintenance of hard drives.

  You can get the picture here: http://www.ultimatebootcd.com/

  Just burn it to a CD, boot and choose the tool for your hard drive to check it out and repartition it.

  It could be that useful...

  Welcome them

• Cannot install the modem "Error 1722" MC760

  OT: "error 1722".

  Hello, I got an old mobile broadband Virgin to modem, the last time I'd use, I had windows XP then a crash and installed windows. I then discovered my mobile vvirgin modem broadband was not good.  The modem operating system is a plug-and-play and nothing happen when it was plugged after 2-3 weeks, we are arrived at the conclusion that it was ba d.But my VM support support group helped me download the software modem of the MC760 en on the VM site, which went well but the modem still does not work. I bought another mode of MC760 even type, pluugged in my computer and everything went very well, the instructions arisen on how to download and launch. Installation is going well until he stopped and said another more recent version of the modem was already installed and had to be removed. Then I have to remove the version MC760 my support team help install me and got an error message 1722 saying it cannot be uninstalled I do with my support, I did and they said that's a problem installing Microsoft contact, or that I need to contact Microsoft.  at the bottom of the message it says remove Virgin Mobile Installation of the driver. Now how to get out the last version of the MC760 my computer modem so I download and use the older MC760 modem. Help

  Contact Virgin mobile.

• Cannot install the modem, fails and restores

  Please can you help me

  Please can you help me

  I have a high FUDJISU Tower, a bit old but still good features although sudenly it won't install my modem

  It will go almost all the way and it starts to pull back on the last piece!

  What can I do?

  Thank you

  Irene

  Hello

  
  4 K you an error during the installation of the modem fails?
  2. What is the operating system installed on the computer?
  
  If you have Windows XP and check if the problem persists, perform the steps in the article. http://support.Microsoft.com/kb/883356
   
  Also check the links below.
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-modem-problems

  http://Windows.Microsoft.com/en-us/Windows7/install-or-remove-a-modem
  
  Hope that helps.

• OfficeJet pro 8600: cannot install the printer Officejet pro 8600 on work network using HP on Win10 software

  I've recently updated my Surface 3 pro to win 11.  I try to install my printer using the HP installation software.  He worked with Win 8.1. The software has never been able to detect my printer automatically but in the past I could enter the IP address and it would connect.  This isn't the case, when I select wired connection, it just never fails to give me the opportunity to enter the ip address.  I can install the printer with the help of the W11 Control Panel, but the features of scan if the HP (HP printer assistant) software does not work it is frustrating for me.  Help, please.

  Kind regards

  Michael

  I found the solution to this problem.  You just need to run automatic installation wired function twice and then it will ask for the IP address.  Once I did this and entered the IP address, it worked fine.  It must just be an option to start or appear after a failure.  I had to let it fail twice has been confusing.

  Michael

• Cannot install the trial Adobe Pro XI

  Im trying to download the trial version of Adobe Acrobat Pro XI and I keep getting stuck on the accept terms page. There is no OK button click here

  Refer to this:

  Do not click on accept. Acrobat, Adobe Reader

  Mylenium

• Cannot install VISTA on Satellite A100 graphics card driver

  Hi all

  I need help.
  I just installed Windows Vista Ultimate on my Satellite A100-326, (series PSAA9). This system has a graphics card from NVIDIA® GeForce Go 7300 with 256 MB dedicated memory that has worked very well on Windows XP MCE!
  The default graphics card driver does not work, so I downloaded the new driver for VISTA from Toshiba.
  Don't just install! I always get the following message: "the NVIDIA installer didn't find all the drivers that are compatible with your current hardware. The installation program will now stop. »
  We know what the problem might be?
  Did someone encountered the same situation?

  It's really frustrating...

  Thank you
  Jota

  Hi Jota

  Please check the different view on the same driver problem.
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=20479

  Try to download the driver again and see your results. Thanks ;)

• Satellite Pro A200 where to download the recovery disks

  Is anyone know where (or if) I can download installation / for the Toshiba Satellite Pro A200 recovery CD.

  See you soon,.

  The recovery CD can not be downloaded!
  Must order it from the ASP in your country if you have damage or lose!

  But I really don t understand why you ask this question! These questions are answered several times! First check the existing threads before you ask for something!

  concerning

• Re: Satellite Pro A200 - no activity - nothing on the screen

  Hello!

  I have a lot of problems with the Toshiba Satellite Pro A200.
  Same problem for all: when you connect the power adapter led turns blue!
  When I press on "on" button the second led turns blue, the fan runs for a while, but there is not activity: nothing on the screen.
  No thing hard disk led...

  I have a lot of this problem with the Satellite A200. The motherboard is a LA - 3481P.
  I am an electronic engineer and I m specialized in laptop repair card main but I did not understand this problem.

  Can U help me telling me that maybe the defective chip?
  Thank you very much

  Hello

  I don't know if you saw that this forum is the forum of users and you should not wonder if nobody can give the exact answer. As an electronic engineer, you must know that no one can answer specifically and to find the good chip, you must run diagnostic tool.

  So I think that you need professional help. Try to contact nearest Toshiba authorized maintainer and ask for help.

  BTW: I am really interested about new comments here.

• Satellite Pro A200 - 1 MI - need driver for PCI memory controller

  I have the Toshiba Satellite Pro A200-1 MI (PSAE7E) having a problem with the PCI memory controller on my laptop.
  When I go to Device Manager it shows the question mark in the tab other devices and when I go, it is yellow? (question mark) and! (typical brand) to the PCI memory controller. I took and downloaded all the drivers of your site:

  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp?service=EU

  for XP, but I'm not sure what kind of driver do I need to install for PCI controller memory, it is driver bios or something else? I just need to know what to install to overcome this problem with my device manager and the PCI memory controller.
  Thanks in advance!

  Hello akibono

  I imagine that you have installed Windows XP Home clean on your laptop and now you want to install all the drivers, tools and utilities. Am I right about that?

  In any case, after the installation of Windows XP Home edition you install all the drivers, tools and utilities in the order of the specific facilities. After doing this, everything should be OK and every hardware component will be correctly configured.
  Please install all the stuff as follows:
  WINDOWS XP HOME EDITION
  Driver Chipset
  Display driver
  Audio driver
  Driver modem
  Storage Manager
  LAN driver
  Touchpad driver
  WLAN driver
  Toshiba Assist
  Flash Media driver
  Driver webcam
  Hardware configuration
  Controls
  And so on

  I hope that everything will be OK.

• No sound via HDMI on Satellite Pro A200

  Hey everybody,

  I have Win XP installed on my Satellite Pro A200.
  When I plug in the hdmi video cable through to the tv but the sound is not yet on the speakers of the laptop.

  I tried to change the output of the sound at all possible options, but it doesn't seem to work.

  Any ideas?

  Good news!
  Could be useful to others, so I'm glad that you posted this here!