Cannot install the printer. spoolersrv has stopped working

Similar Questions

• Cannot install Skyrim, error Installer has stopped working.

  I can't install skyrim.evertime I run setup.exe it always stopped working, im already try with run as administrator but dint work, im using regutility setting instead my setup it makes my computer error can't start windows correctly.and this problem not only akyrim.lots of my program cant stat too.this happen when im reinstalling windows 7 ultinate.

  Hello

  • Do you have an error message when you run SFC scan?
  • Have you tried to install the game on another folder and check?

  Program installation or removal fails due to corrupted registry or install blocked key. Follow these methods and check if that helps:

  Method 1: Unregister and register the Windows Setup program again

  1. Click Start, click run, type MSIEXEC /Unregister. and then click OK. Even if you do it right, it may seem that nothing is happening.
  2. Click Start, click run, type MSIEXEC/REGSERVER, and then click OK. Even if you do it right, it may seem that nothing happens, or you can briefly see an hourglass. After you run this command, the operation is complete.

  Try your application based on Windows Installer again.

   

  Method 2: I suggest you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software. The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Also refer to this link: http://windows.microsoft.com/en-us/windows-8/how-find-remove-virus

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Warning: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  I hope this helps.

• I am trying to install a PC game. When the DVD and I click on install I get the message, setupexe has stopped working

  original title: setupexe has stopped working

  I am trying to install a PC game. When the DVD and I click on install I get the message, setupexe has stopped working, windows will find a response and advise. Nothing happens. What should I do to install the soul?

  Hello

  ·         The game you are trying to install?

  ·         You are able to install other programs?

  ·         The specification of the computer meets the requirements for the installation of this game?

  Step 1: Check if the game is compatible with Windows Vista.

  Windows Vista Compatibility Center: http://www.microsoft.com/windows/compatibility/windows-vista/default.aspx

  Step 2: Try to copy the contents of the DVD on the desktop. Then install the game.

• Registration for the web function has stopped working in my copy of photoshop elements 12.  I get this message "the operation could not be completed.  The system cannot find the path specified"reset preferences was not fixed.

  Registration for the web function has stopped working in my copy of photoshop elements 12.  I get this message "the operation could not be completed.  The system cannot find the path specified"reset preferences was not fixed.

  My os is windows 7.  elements of 12 worked fine for several months and then save for web stopped working

• Cannot install the printer. The print processor does not exist.

  Windows 7 Enterprise 64 bit.  I am able to install HP LaserJet printers but no virtual printer.  I can not load the XPS from Windows printer or Print to OneNote.  I also tried to load more than one PDF printer and none of them work.  The error I keep gettig to "cannot install the printer.  The print processor does not exist. »

  Any ideas would be appreciated.

  My laptop has been reloaded from a picture, and I was not able to start the print spooler at all. I have studied the issue and cleaned files and registry entries and was able to print on real printers, but not virtual. That's when I asked the question.

  Finished reimage the computer again, and once again, I could not start the print service. We discovered that the image that the laptop was built from was actually a VMWare virtual machine, so we started to look in that direction.   We had to delete the following entry in the registry and rebooting, how the print spooler began to work very well.

  [Print HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Monitors\ThinPrint for VMWare Port Monitor]

  You wanted to post this in case someone else ran into a similar problem.

  This is what worked for me.

  I copy the files from the print processor from another machine to work with the same architecture as the one who has the problem (x 86 or x 64).

  Step 1: Stop the print spooler service.

  Step 2: Copy all the files and folders on the system to work under C:\Windows\System32\spool\prtprocs\x64.

  Step 3: Make a backup of the system files listed in the C:\Windows\System32\spool\prtprocs\x64 problem.

  Step 4: Paste the files that you copy from the system of work in the case of the United Nations, the problem system.

  Step 5: Start the print spooler service.

  Try to connect or install your net printer and it should work now.

  I hope this work for all of you.

• Cannot install the printer and windows update error 80070026

  Original title: Registry Editor not work cannot install the printer

  I have Vista the operating system on a Dell laptop with a Core 2 duo, map of Nivea.  Norton Antivirus now after it has started.

  Tried to install the dell printer after uninstalling all printers.   I scan my system using promp... sfc/scannow then I got windows results resource protection found corrupt files but was unable to fix some of the them.details are included in convertible bonds. Journal windir/logs/CBS/CBS.log
  for example:C:/windows/log/cbs/cbs.log

  I looked in the directory C find regedit.exe to rename, but was unable to find it.   I found these if this can help.

  Regedit.exe.4288.dmp
  Regedit.exe.3280.dmp
  Regedit.exe.2292.dmp

  I also got error or popup that without running windows Explorer and then restart it.   I can't install the printer as it pops up and I need to close the program.

  also receive error installer that it is already running
  install GUI is unresponsive

  error code 80070026 during the installation of windows updates.  I open without addons and updates are all to date.

  I'm sorry that there is so much information and error codes.  I think that all what concerns the corrupted files.   Can you help solve c drive please.

  Hello

  1. What is the serial number and model of the printer?
  2. What are the failed updates?
  3 have there been any changes made on the computer before the show?

  I suggest you try the steps to solve the problem with the installation of printer.

  Method 1:
  Run the Fixit and check if it helps.

  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  For more information, see the links:
  Find and install printer drivers
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-and-install-printer-drivers
  Search for a printer, the manufacturer Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website
  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  I suggest you try the steps to fix the problem with Windows Update.

  Method 2:
  Put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.
  http://support.Microsoft.com/kb/929135

  Note: After completing the steps in the clean boot troubleshooting, follow step 7 link to return the computer to a Normal startup mode.

  Method 3:
  Temporarily disable the security software.
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable the antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network at the time the anti-virus software is disabled, your computer is vulnerable to attacks.

  Method 4:
  You can also manually install updates (KB number) by downloading from the Microsoft Download Center.
  http://www.Microsoft.com/downloads/en/default.aspx

  For more information, please see the links.

  Problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
  You cannot install some programs or updates
  http://support.Microsoft.com/kb/822798

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  322756 (http://support.microsoft.com/kb/322756/)
  How to back up and restore the registry in Windows

  Warning: An upgrade on the spot is the final solution before you have to reinstall the operating system. Note that it takes as much time to do the upgrade as to reinstall the operating system. In addition, some of your custom Windows settings may be lost through this process

  Hope this information is useful.

• I get the message "firefox has stopped working" after closing browser

  Hello.

  My problem is that when I close the FireFox browser, I get the message "FireFox has stopped working". It's pretty boring. I have read some other posts here that describes a similar problem and we tried some of the suggestions in them including:

  A clean install, a reset of the browser, running in safe mode, uncheck hardware acceleration, disabling Extensions and plugins one at a time, uninstall my antivirus (avast), backward to 23.01 and audit version run in compatibility mode that someone claims to be helped. None of this has been effective.

  It seems that after a reboot of the computer, the browser will be ok for 2-4 closures and then it will start by the message at each end. In addition, after uninstalling avast was good for 6 closures. Roll back also gave me approximately 6 free message closures. But then, the messages and does not stop.

  Is there anything else I can try? Thanks in advance for your suggestions.

  
  

• Satellite L500D-144 - CCC of the host Application has stopped working

  Ladies and gentlemen,

  My PSLT6E - 007004GR is almost a year.
  This month, there was an update - possibly to leave Microsoft - and since then popt always at startup in Windows 7 this window and look for solutions:
  Catalyst Control Center. The host Application has stopped working, it is looking for a solution.

  A new installation of the driver graphics card and Catalyst Control Center has not changed. Instead, a standard Microsoft graphics card driver is installed.
  Reset of the system for the month of October has also asked nothing, after fresh updates, the problem recurs.
  Is it reproducible.

  Have already reported more customers or I'm the first?

  What can you do to the problem?

  Sincerely,

  CBluebaerchen

  Hello

  > Reset of the system for the month of October has also asked nothing, after fresh updates, the problem recurs.
  To do this the display of Windows Update driver update?

  If so, restore the system to an earlier point and disable this update of the display driver and choose only the updates of Windows. That s enough.

  Otherwise, you can try running CCleaner. It can clean and fix registry problems.

• SyncUp software displays the message "SyncUp has stopped working".

  SyncUp software displays the message "SyncUp has stopped working" what can I do to fix this? Thank you

  Hello

  1. what operating system are you using on your computer?

  2. What is the brand and model of your computer?

  3. it worked very well on your system before? If Yes, you did it all software or hardware change before the show?

  Method 1

  I suggest to put the computer in a clean boot state and then try to open the program and check if it helps.

  Note When you perform a clean boot, you may temporarily lose some functionality. When you start the computer as usual, the function returns. However, you may receive the error message, or you can experience the original behavior.

  How to solve the problem by running the clean boot in Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: Once you have completed troubleshooting, perform the steps in the step 7: to reset the computer as usual.

  Method 2

  Uninstall and reinstall the software SyncUp.

  Uninstall or change a program
  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  Note: Uninstalling the software will erase all the data associated with it. You must redo all favorite and set up anywhere after settings put it back.

  THIRD PARTY WARNING: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  See the following help link:

  http://en.community.Dell.com/support-forums/software-OS/f/3526/t/19391777.aspx

  It will be useful.

• The program executable has stopped working

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with... of programs a SSC downloaded for smpt installation
  • Error messages. the program executable has stopped working... a problem caused blocking the program works correctly. Windows will close the program and notify you if a solution is available
  • Recent changes to your computer. None
  • What you have already tried to fix the problem.no I don't know what to do

  Confirmed that the program is compatible with your version of Vista and the hardware in your computer? http://www.microsoft.com/windows/compatibility/windows-vista/.

  You can try to uninstall the program, download a clean copy (in case where the original has been altered) and re - install the new download and then see if the program works.  If this does not help, try right-clicking on the executable and click on run as administrator and see if that makes a difference.

  I hope this helps.  If this isn't the case, follow the advice implied by Malke response and contact technical support by the manufacturer of software for assistance.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Cannot install the printer HP C4500 on Windows 7

  Cannot install the printer HP C4500 on Windows 7 - printer installation disc only supported by xp and vista.  What should I do?

  Yes, your solution worked, and I was finally able to connect my C4500 printer as wireless.  Thank you very much for your help!

• Cannot install the printer. The print processor is not (winprint)

  According to the scenario:

  DC1 in site 1 runs Windows Server 2012 Standard, printing and Document services are installed. Many printers are installed and work.

  DC2 in site 2 is running Windows Server 2008 R2 Standard 64-bit, printing and Document services are installed. I want to install printers that users in this site must be able to print with.

  Same printer exist in both sites. In Site 1 on DC1, I was able to properly install the driver, add the port and installed the printer.

  I took the same driver DC2 and installed. I created the Port with the IP address of the printer but when I finish the Add Printer Wizard I get an error message saying: cannot install the printer. There is no winprint print processor.

  I was looking in many forums and before you ask, the HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environments\Windows NT x86\Print Processors\winprint key does not exist on two domain controllers (tried to create thispost), but makes no difference.

  The winprint.dll file does not exist in the C:\Windows\System32\spool\prtprocs\w32x86 directory on any of the machines, but is located under C:\Windows\System32\spool\prtprocs\x64 on the two machines.

  There seems to be no difference in configuration between these two machines, but as I mentioned abov, on DC1, I'm able to add the printer, and I'm not on DC2.

  Is there anything I can do to get the job to the printer on DC2?

  (And for those who ask why install on a domain controller, there is no member server in this site).

  Thank you

  Hello Josi,

  Thanks for posting your question on the Microsoft community.

  The question will be better suited to the audience of professionals on the TechNet forums.

  I would recommend posting your query in the TechNet forums.

  TechNet Forum
  https://social.technet.Microsoft.com/forums/en-us/home?category=WindowsServer

  Thank you

• "Cannot install the printer. Operation could not be performed. error 0x000003eb.

  I'm running Windows 7 (not Vista) and trying to install a Kodak printer driver and get "cannot install the printer. Operation could not be performed. error 0x000003eb"I searched constantly everyday for a fix. You have a solution other than what answers are already in this forum.  I uninstalled and reinstalled tried wireless and usb, installation driver separately, tried to install it in safe mode, run now utility scan.  I think that the problem began with an update of Windows 7 which has hung up and eventually having a corrupted file?

  Hello

  What is the exact model of the printer number? I suggest you to check if the printer is compatible with Windows 7: http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx If the printer is compatible, then uninstall all the drivers connected the printer to the computer, download the latest drivers from the website of the manufacturer, the install without connection to the printer. Connect the printer when it prompts. If the problem persists, contact the printer manufactrer for assistance http://support.en.kodak.com/app/contact/selected/true For more information see: http://support.en.kodak.com/app/answers/detail/a_id/1258/kw/Unable%20to%20install%20printer/related/1/selected/true Note: The use of third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• After execution of the new updated Adobe, HP Elitebook 2760p left click on the touchpad button has stopped working.

  Original title: left click not working not not on HP laptop

  On my HP Elitebook 2760p running Windows 7 Pro 64 bit, left click on the touchpad button has stopped working.  The right click works, the works of pad, (scrolling and click on) it's just the left click.  It started after the execution of the new update of adobe. I tried to uninstall and reinstall the driver synaptec. I tried the mouse fast and slow speed. I tried pressing rigid, flexible, in different places. I would try to uninstall the update from Adobe, but it won't allow me.  So I uninstalled Adobe Reader and re-installed. Still nothing. Any suggestions?

  Hi cyrilmillot,

  You try to run the Adobe Reader removal tool to remove the Adobe reader completely the system software.

  See the link to Adobe to download the removal tool:

  Adobe Reader/Acrobat removal tool

  After retiring, you can check whether the left click works. If it does not, you could get in touch with Adobe support for further assistance on this topic:

  Adobe forums

  http://helpx.Adobe.com/support/

  If the problem persists, then it may be a hardware problem and you may have to contact HP support for further assistance:

  HP support

  HP laptops - use and configure the TouchPad (Windows 7 and Vista)

• Why my Catalyst Center: the host application has stopped working?

  When I log on my computer, a window opens in two separate occasions stating that Catalyst Center: the host application has stopped working... How can this be repaired?

  Hi Missy,

  This probably isn't a problem MSE or malware.  It could be a problem with the video software (which is otherwise commonly) and I have it on my system as well for my ATI graphics card.

  This just started recently - as the last day or more?  If so, try a system restore to before it started to see if that helps. If you use Windows 7, seehttp://www.sevenforums.com/tutorials/700-system-restore.html. If you are using Vista, seehttp://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/. If you are using XP, seehttp://support.microsoft.com/kb/306084. Sometimes this simple process made the rounds and sometimes that doesn't help - but it is easy and worth if she has recently begun.

  Good luck!

  Kosh