Cannot install vmware tools on the guest operating system ubuntu!

Similar Questions

• Intall the guest operating system updates or VMware Tools first?

  I have the OS (Windows 2000 Professional), which comes with all the major updates to release all the way until 2010. Goes for the installation order, do I install the first updates (requires Direct X 9.0 c as well), or the first VMware tools?

  
  

  Thank you for all responses.

  I'm not aware of a formal recommendation. I usually install VMware Tools after the installation of the guest OS and never encountered any problems with this approach to date.

  André

• Cannot install VMWare tools on first installation of VMW Player for Windows

  Y at - it a tip to install VMWare Tools on VMW Player for Windows.  Tried as a Player 7.1.1 and 6.0.5.

  I downloaded the "darwin" and "windows versions" of tools with version management for versions of reader (for Player 6.05 6.05 tools).  But I don't know how to get VMWare to see downloaded files.  I connected the darwin.iso in the folder of the payload for the CD/DVD drive under settings of the virtual computer.

  I always get a dialog box with this message when I select install VMWare Tools in the menu:

  "Cannot find component on the update server. Contact VMware Support or your system administrator. »

  If you have the appropriate iso image attached to the guest, you have no need to use the "Install VMware Tools" menu - it's all that.  Go to comments and run the installation from the CD-ROM drive.

• Parallel logic LSI, LSI logic SAS, parallel Buslogic (not recommended for the guest operating system), vmware paravirtual

  Infrastructure:

  vSphere

  ESX 4

  Reference Dell R710 Server

  I install WIN 2003 x 64 as a virtual server on ESX 4, when I select LSI logic SAS & LSI logic parallel it does not detect the hard drive, do I need driver if so where can I download?

  For parallel bus logic (not recommended for the guest operating system) & Vmware paravirtual, do I have to select this option for my win 2003 R2 x 64 edition?

  Please help on this issue.

  ~ Rashid

  If you really want to use it for installation, you will need to extract the driver from the VMware Tools ISO and add it to a disk image.

  Dave

  VMware communities user moderator

  New book in town - Start Guide quick vSphere -http://www.yellow-bricks.com/2009/08/12/new-book-in-town-vsphere-quick-start-guide/.

  You have a system or a PCI with VMDirectPath?  Submit your specifications to the unofficial VMDirectPath HCL - http://www.vm-help.com/forum/viewforum.php?f=21.

• Cannot install VMWare Tools for Windows MCE

  Previously, I had Windows MCE installed and running on the VMware 1.x tools.

  I upgraded to VMware 2.0 and now I can't get the tools to install. When I click on "Install VMWare Tools", it brings up a window with the following in it:

  VMWare tools is not supported on this operating system.
  Check
  configuration of the virtual machine to make sure that the settings match to the
  operating system installed. See the documentation for more details
  on the guest operating systems supported.

  I checked the configuration of the virtual machine and this shows that the Windows operating system, as selected.

  I am running VMWare on Ubuntu 8.10, if that matters.

  Any suggestions?

  Thank you

  David

  Hello

  I compared it with mine and there are 2 major differences.

  First of all, I use older virtual material (version 4 instead of 7) but I do not expect that this is relevant to this problem. In addition, it makes little sense to use older virtual hardware unless your virtual machine must be compatible with VMware ESX. For example the old version of HW I use excludes the directx features, and you probably want to use.

  The other main difference is guestOS, in my version, it has the following value:

  guestOS = "winxppro"
  

  Could you try that and see if it helps?

  If this does not help then I'm afraid, we're going to need more details. In this case it might be useful to the vmware.log file loading

  One thing you might try must in any case completely re - install VMware tools in removing it first.

  In order to do not find themselves trapped by the windows activation logic or other inconveniences while experimenting, I recommend taking a backup of the virtual machine when it is completely stopped before doing anything else.

  --

  Wil

  _____________________________________________________

  Visit the new VMware developers at http://www.vi-toolkit.com wiki

• Cannot install VMware Tools.

  Hello

  my client have esx1 and esx2 - vSphere vCenter device 6.0 and 6.0 knots. When I try to install VMware tools on Windows Server vm = error:

  VIX 21001 = error code

  Cannot install VMware Tools. An error occurred trying to access the image file ' / usr/lib/vmware/isoimages/windows.iso ' to install VMware Tools: 2 (no such file or directory). If your product comes with the module of VMware tools, VMware ESX to reinstall, then try again to install the VMware Tools package in the virtual machine

  When I connect to esx1 via Putty and check ' usr/lib/vmware /-the 'isoimages' folder missing.»

  Please, what is faster solution?

  CZ THX

  Hello

  problem solved...

  I don't know why, but on esx1 - Local Direct USB access - declined, I restarted esx1 and now works perfectly

  so, I lost my network settings

  THX

  Tom

• How update the vmware tools on the guest or virtualcenter

  Hello

  We run a store where we support some linux boxes.  We had some problems with time drift and other things and on our vmware guy suggested put us the version of VMWare tools on the guest or virtual Center.  The only problem is that I can't find a procedure for this.

  To clarify, I'm not how to install VMWare tools on virtual machines.  We know how to do and we know to recompile after we patch the kernel.  But our guys VMWare suggests that in the end we're just recompile the same old version of VMWare tools to make it work with the new kernel.

  In fact, we suspect the version we have is very old, that we have not successfully updated because we were running on 2.5 and are now running on 4.0 Update 1 (wait for the 4.1 support nexus is added).

  Thank you

  Dan

  Welcome to the forums!

  So I assume you mean updating the source VMware Tools, which is then used to update VMware tools in guests?

  The guy from VMware is true, recompile the tools is necessary after a kernel update has been done. It is not up-to-date version. However, you must do that to make them work again.

  The latest VMware tools comes with the latest product or updates/patches for this product. Information shows that the tools are not updated after you apply this hotfix or an update.

  They also can be downloaded here (for ESX 4.x) : http://www.vmware.com/patch/s3portal.portal?_nfpb=true&_windowLabel=SearchPatch&SearchPatch_actionOverride=%2Fportlets%2Fpatchupdate%2FdisplayAllBundlePatches&_pageLabel=s3portal_pages_downloadPatch_page

  AWo

  VCP 3 & 4

  \[:o]===\[o:]

  = You want to have this ad as a ringtone on your mobile phone? =

  = Send 'Assignment' to 911 for only $999999,99! =

• Trouble installing the guest operating system

  All,

  Having trouble installing the guest operating system - Windows XP SP3. I followed the directions of the booklet that I try to boot from a local image and a CD. I can't able to get into the setup of the BIOS to start the virtual machine when you press F8. I am currently on a decentralized network that starts his BONES from a PXE server. When I turn on my VM, its shows the boot process than my actual desktop. I tried many configurations, but still problems. All instight would be useful. Thank you.

  Welcome to the forums!

  To enter the VMWare guest BIOS press F2, no F8.

  You can also add 'bios. BootDelay = 10000 "in the prompt .vmx file. This gives you more time to press F2.

  The virtual guest has a CD-ROM attached to it?

  Is it "connect to turn on?

  Is it connected to the physical machine (where the OS CD is inserted)?

  AWo

  VCP 3 & 4

  Author @ vmwire.net

  \[:o]===\[o:]

  = You want to have this ad as a ringtone on your mobile phone? =

  = Send 'Assignment' to 911 for only $999999,99! =

• Cannot run the program in the guest operating system

  Hello

  I'm trying to run a program file (an .exe) in a virtual machine via vCO using executeCommandInGuest.

  The thing is that the .exe file starts a user interface to display the status (do not ask for entry) when it runs locally. When I call the script of vCO, I get the following error:

  Error while executing command (can not run the command: InternalError: a general error occurred: a program could not run on the guest operating system (name of the dynamic Script Module: executeCommandInGuest #40) (name of the dynamic Script Module: executeCommandInGuest #46))

  
  

  If I try to call a .bat file in the VM that starts the program of the WF works but the .exe file is never started in the virtual machine.

  If I specify to run another .exe for example ping.exe only complete control of WF and if I specify a .bat file that call ping.exe he also successfully complete.

  There is no silent mode for the .exe I need performed.
  

  Any help would be appreciated.
  

  Thank you

  Magnus

  The problem was caused by the user access control. Put forever does not resolve the problem, disable it through the user interface, restart the virtual machine, and then continue with my script.

• VMPlayer newbie - switch back and forth between the host and the guest operating system

  I am newbie to VMPlayer. I just installed VMPlayer 3.0.0 build-203739 on Red Hat Linux 5 (host). Then I created a VM comments Kubuntu (8.10). So far so good. In the VMPlayer window, I selected 'play Virtual Machine '. After this, the host operating system controls disappeared and I could see a taskbar on the top of my screen and I could also see Kubuntu startup (in an area of the small window in the center of the screen). The problem I'm running is that I'm not able to navigate outside of this area of the small window. I'm not even able to click/Select the taskbar of VMPlayer top of the screen. The mouse movement is limited to the area of the small window. How to and fro my host and the guest operating system? Is there a key combination? I finally had to stop my VM guest to return to the control of my host system. I guess it's a problem quite newbie that I am running. Any help would be greatly appreciated.

  Hello, welcome to the forum

  Host Windows to switch between comments and the OS (when you are in the guest operating system), you must use ctrl + alt.

  According to this link , it's the same thing in Linux host too.

  >Default VMware Player uses key combination Ctrl + Alt to jump out of the guest. Then CTRLAltdel is accessible via theAltInsert command. If you find this annoying, you can change the jump shortcut to CtrlAltshift by adding the following lines to your ~/.vmware/preferences:

  > pref.hotkey.shift = "true".

  > pref.hotkey.control = "true".

  > pref.hotkey.alt = "true".

  After your installation OS in the virtual machine, install "VMware Tools" on it so you will get better performance and some improvements (like moving your mouse out of guest to your host operating system operating system and Vice Versa, or be able to copy beyond host/guest, better resolution on reviews and...)

  I hope it helps a bit.

  -= If you have found this note/response useful, please consider awarding points to 'Correct' or 'useful ' = -.

  -= If there is a mistake in my notes, please correct me! =-

  -= Thank you =-

• Performance problem with the guest operating system

  Hello gurus - I have one of the most unusual questions, I ran into a few time.   Here it is:

  I have a guest w2008R2 OS - installed in a 5.1 version of VM 7 vSpherer - which has an Emulex LPe 12002-E 8 GB dual HBA port is assigned to the as 2 PCI (1 device per port) via DirectPath devices

  The guest operating system has an application that performs backup tests.   WWPN of the HBA is zoned in the fabric and declared in the interface of Compellent Storage Center and everything is good here. the application creates a replay of a volume, mount it as a drive, read all the blocks, then dismantles and moves then repeat the process with what ever additional volumes should be safeguarded.   It is so cool I have do this with a VM right and not a physical host?  (would be cool if I had work NPIV but that's another story, not with technology HBA vendor support...)

  So, what's the problem?   Well, the bed the mounted disk backup will work extremely slow as slow as 5MB\sec flow, then during any other activity takes place on the system the flow jumps up to 150MB\sec all of a sudden and will continue to run fast for a long time and finish jobs on time with each work taking a little more than an hour.  But when the slow going the same work (all jobs are the same, they are simply by reading all the blocks of a bunch of 200 GB volumes and wrote a set of NULL value, do not forget this is just test) takes up to 10 hours to complete.

  I think that what is the culprit?   POWER MANAGEMENT.

  I have just about each performance counter and the journal of events known to man and I don't see anything abnormal on the table, ESXi virtual machine, nothing.  But what I see in the newspapers is any kind of activity that could happen in a transparent manner to save energy.

  FACTS on this case:

  -Reservation of memory is defined (it must be for directpath otherwise, you can't power on the virtual machine)

  -Booking CPU - has not been defined before an hour ago, I gave her just a small reserve for this rule, so I do not know if this will help alleviate the slow flow, or have an effect on what I think is a question of power (unit linked) management

  -windows power management is set to high performance never-ever - but not until an hour there doesn't I changed advanced settings for USB Disabled------turned off.  PCI peripheral energy saving setting was already off.  Which is in contradiction with my theory.  But maybe, just maybe, something is broken somewhere, or could be a bug... blah blah blah

  -the HBA, Emulex, as it appears in Device Manager in the guest OS doesn't have a power management tab to disable the feature, I don't see that the adapter VMXNET3 had this tab, and I turn off the power save setting to be conservative, do not think that it was the culprit, but as there is no real data running through the NIC.  The data is simply to be read from the disk mounted, not copied on any wire Ethernet.  never the less, in the Emulex properties is a Details tab and a selection of power data, and performance data indicate you what power mode, the device is, as well as feeding supported systems.  D0: full power, but D3, which shows as supported by the device, is an energy saving mode.   I could not yet attend the setting at the time of slow activity, my good intention as soon as possible. He is currently shooting in D0, full power.

  This is so what I have to offer on this, I hope that its just...   If I'm missing something, or if others have experienced this massive loss of unknown flow without reason and have resolutions, please share.

  If there is a way for me to disable power on the Emulex HBA management inform you please, I don't mind if I stop to enter the firmware, if that was even possible.  But if possible I would disable it immediately before any new tests are executed.

  The root cause of this issue has never been identified by VMware support which for me is a question of ugly.  Reservation of CPU for the VM using directpath IO with HBA installed in it corrected the problem.  I'd be leary with direct path IO.

• CPU has been disabled by the guest operating system error

  Running VMPlayer 3.1.3 version 324285 build on Windows 7 Enterprise 64 bit with 8G of memory.

  When I try to install some VMs based on Linux of ISOs, in a few seconds, I get the error:

  "The CPU has been disabled by the guest operating system. You must turn off or reset the virtual machine at this point. »

  (See also the screenshot attached)

  This happens on other ISOs based on Linux/Windows. I googled the web & VMTN, but have not found relevant

  answer my question.

  Thanks in advance

  Alex

  Hello

  What operating system is tryining install you?

  Take a minute to watch in VMware Compatibility Guide: search guest conductor /and try to upgrade to a version 3.1.4 If your system does not support the direct execution of 64-bit.

  Concerning

• CPU pegged at 100% in the guest operating system

  Hi all

  New to this forum, so I hope I'm posting in the right place. Note that I'm not our VMware admin, but rather, I have a server I have to admin that has been converted to VM via the P V. apparently process, our group has converted nearly 50 PMs successfully and of course one of mine is the only one who has a problem now. We have a custom application that has been developed to synchronize data between ESRI GIS and databases SAP. The code is about 7 years old and runs on a version of Oracle (9.2) and is Java based, both on the same vintage. It is not possible to upgrade by the creator going out of business and not having is not the source code. I ask this to understand that the problem is probably with the programming, but thought it was worth it.

  Anyway, one of our guard batch process fail with a Java out of memory error on the virtual machine. It works well on the PM. A consultant ran the diagnosis with a Profiler memory on the virtual machine and concluded that the program never went beyond 256 MB and we have 1 GB allocated to the guest. We now consider the CPU issues. The only other thing we know is different is a matter of hyperthreading (HT). The PM is certainly HT'd (1 physical CPU showing that 2) and it does not appear that this setting met on the virtual machine. When you run the package on the PM, we see 2 CPUs in the Task Manager, and neither hits 100% for more than a few seconds for the whole process. On the virtual machine, we see a flatlined CPU and it is 100% most of the time until it fails about 15 min in.

  The sysinfo on the virtual machine shows a 2400 MHz CPU, while the PM shows (2) 3400 MHz CPU (due to HT). I checked all my other virtual machines, and they are all 'show' 2400 MHz, so this must be a virtual standard machine type? I think that the virtual computer guest has access to the CPU ramp according to the needs, but then I'm not clear why the task manager would show that he attached the entire lot? It is likely that task manager prompt indicates whether flatlined to 100% of a 2400 Mhz CPU, even if she isn't really the most? If this is really the most, our admin should not be able to increase the dedicated CPU (I looked at the console with him and did not see an obvious option for this)? Is it possible to enable hyperthreading on the * comments * OS to mimic what has had on the PM? We cannot add another CPU to the guest due to licensing issues. Oh yes, the guest operating system is windows server 2003 and VMware ESXI 4.1 server. Thank you very much!

  G

  The speed of the CPU that you see is the speed of the physical processor in ESXi hosts. You cannot increase this speed, however - licensing - usually, you can assign two vCPUs, virtual machine as a dual CPU core instead of 2 processors. This option has been added to ESXi 4.1. See http://kb.vmware.com/kb/1010184 for more details.

  What you need to do is to set the number of processors to 2 and add the advanced parameter cpuid.coresPerSocket = 2.

  André

• My pc cannot install this update received the automatic update system (KB2564958).

  Hello

  My pc cannot install this update received the automatic update system (KB2564958). Each time you start my system, a necessary update is displayed in the taskbar, but after installation and reboot of the system, this update appears once again, which indicates that the update has not been installed.

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy.  If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

• Help. The CPU has been disabled by the guest operating system. Power off or reset the virtual machine. WHY?

  Greetings.

  I have a 5.5 with an operating system Red Hat 5.10 ESXi environment. The OS worked fine until a few days ago. ESXi displays the error "the CPU has been disabled by the guest operating system. Power off or reset the virtual machine. I Don t know why my server displays the error if my environment was OK. Could be a kernel problem? operating system problem?

  Ideas?

  Thanks for the help.

  Have a look here. http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=2000542

  Did you recently patch your VM? Looks like when the guest operating system runs the incorrect commands that it can have a deactivated processor.