Satellite Pro 105-S9722 - why the touchpad does not work when it is the cover up?

Similar Questions

• Re: Satellite Pro L500-1VX-accessibility (FN key) does not work correctly

  I need your help to fix this problem on my Accessibility button does not work, when I press the FN key to turn my wireless on it does not work.
  When I go to program files > Toshiba > utilities > TACSPROP.exe a warning alert telling me it does not allow in this operating system.
  And for your information I have Windows 7 32 bit.

  If you are very popular to tell me what to do with this problem.

  Hello

  All the stuff for Win7 32 bit, you can find on the Toshiba support page in the download section > http://eu.computers.toshiba-europe.com > support & downloads.

  As Akuma written already install the most recent value package and check the functionality of the FN keys.
  Wireless network card is installed correctly?

• Satellite Pro L10 - FN + F5 view command does not work

  When I attach my Satellite Pro to an external CRT, LCD monitor or projector, I get the same problem each end every time.

  the Fn + F key to toggle the display of control does not work.

  When I start the laptop with the attached external display device, everything is fine, and the display is exclusively channeled in the external display. but as soon as windows has started, the display switches to the screen of the laptop, and there is no way to make it back.

  y at - it an update for this problem, or another solution I know not?

  Thank you.

  Hello

  Seems to be a simple software problem.
  I put t know how long you OS runs on the laptop, but maybe some files registry entries are corrupted and therefore the FN key does not work as it should.

  Could help to reinstallation of the OS and the use of the recovery CD

• Satellite Pro A60: TV S-VHS on does not work

  I have a Satellite Pro a60 and I'm pulling out my S-VHS to function... This does not work very well.

  I connected all the cables right and right click on the desktop, again choose preferences, then on Preferences, but I can't find anything on the transmission of the video signal.

  I have not though as the configuration standard of Toshiba, but that shouldn't matter. I'm running WinXP SE, but the drivers for my card ATI is about two years old and I can not find a suitable one anywhere, this is the problem, or should I program utility ATI?

  Best regards!

  Hello

  You should also check the TV settings. You must choose the right channel.
  As in the previous announcement suggested, you can change the display device using the FN + F9 key combination.
  If you want to play the DVD with the WinDVD player for example if you first need to change the output of the TV and then start the WinDVD.

• Satellite L350 - key FN and F9 touchpad does not work

  Hello

  I have a toshiba Satellite L350 with Vista 32 bit and my problem does NOT work FN keys.
  I installed already Synoptics Touch Pad V6.3 from Toshiba Web site, but it did not help.

  I searched for other software mentioned on this forum, but I could not find.

  The biggest problem is that my touchpad is locked, and fact without work FN + F9

  Use me keyboard just - what is difficult and annoying :(
  I'd be really greatefull if anyone can help me :(

  Hugs,
  Kate

  I agree with Akuma
  You need the PPV for the FN keys work.

  PS; If you want to use the Toshiba OS preinstalled, so everything should work properly!

• Satellite Pro L20-212 - USB 2.0 does not work

  Hello

  I own a * Satellite Pro L20-212 *, * Windows XP (SP2) is installed, but USB2.0 does not work *. I see nothing on USB 2.0 in the Devicemanager and the speed of the USB 2.0 devices attached is at the level of the USB 1.1.

  I don't know what information is needed to help me with this problem as it should normally work on my laptop (and I know that the laptop has USB 2.0 ports).

  What I have to install a special driver to use USB2.0 or is there any software on my laptop that I need to activate?

  Thank you very much
  Frank

  Hello

  Did you install the image on the Toshiba Recovery CD? This image contains the Windows operating system, Toshiba drivers and additional utilities. After installation, everything should work fine, and also the USB ports should work also.

  The USP ports, you can find in Device Manager in the serial BUS controller universal section. Open the tree and check if there is some yellow exclamation points.
  Then try to remove the Device Manager, the controllers and the USB hub and restart the laptop. After restarting again the OS should recognize USB controllers deleted again.

  I hope that this accelerated procedure will help you.

  Greetings

• Satellite Pro C850-1EQ - 8 tiles Windows does not work

  Hello

  I'm desperate for help try to solve this problem with my laptop. When I got my laptop (at Christmas) the majority of the tiles on the home screen windows 8 worked, however after a week or two they have gradually stopped working, which is very frustrating.

  When I click on a tile, it opens on the screen but the wheel continues to turn and nothing loads. I spoke to Microsoft online, however, they said that the problem with Toshiba as the laptop was purchased with Windows 8 already integrated.

  Suggestions, they did involving anti-virus and updates did not work.
  The most frustrating part is the Windows tile store does not work so I can't try to updates or new downloads to see if they will not solve the problem.

  Of course, I can use my laptop without the tiles, but I'm upset that I paid extra for Windows 8 and chooses the best part of it not working!

  Any advice on what to do next would be great, thanks in advance.

  Guess what? Try to restore the system Windows 8 back to the factory settings.
  Here you will find documentation how to do this:

  [Windows 8 recovery & repair | http://aps2.toshiba-tro.de/kb0/TSB2A03ES0000R01.htm]

  I recommend using the option * reset your PC *.

  + This option "Reset your PC" is useful when a PC is changed hands, or when you want to get a completely fresh start on a PC, without previous files of the selected configuration. +
  + The delete all, then reinstall Windows option permanently removes your personal files and the PC applications and returns 8 Windows to its original state. That the State of origin is a clean install of Windows 8, nor the default configuration of OEM factory, depending on the medium used for the operation. +

• Satellite Pro A120: DVD/CD-RW drive does not work

  Hello: the dvd/CD-RW drive does not work. apparently it has been disabled somehow! Any ideas on how I can turn it back on?

  Have you tried the Device Manager and it says it works normally!

  Any ideas please?

  Thanks :)

  > apparently it has been disabled somehow
  I put t think that the disc has been disabled!

  How someone or something should turn off the drive? You have disabled the drive? I don't think so!

  You said that the drive appears in Device Manager. So I guess that the drive is enabled and is recognized by the OS.
  You are getting error messages or what's wrong?

  Perhaps the reader can read or burn CDs or DVDs.
  This happens if the lens of the drive cannot calibrate properly and can not handle the inserted media.

  Maybe the replacement drive is required!

• My touchpad does not work when I place my laptop on a table top, but when I place it on my knees it works very well how can I change this?

  When I use my touchpad for the pointer while having my laptop sitting on top of the table it does not work, and when I'm sitting at the laptop on my lap, it works very well is it annoyin so everyone knows what I can do to fix this issue? It is a dell computer, if that helps? anyone?

  HY!

  It seems that you have a hardware failure. No laptop does turn off touchpad, while he sits on a desk. If you have a USB mouse, plug it into the laptop and verify that it works correctly.
  You can also go to Panel of--> mouse--> the pointer options and pay attention to something like "Turn off automatically" or something similar.
  If the doen't even touchpad works, answer me with a little more specific infromation on your computer (Windows version, exact model laptop etc..).

• Why my password does not work when you install AFP?

  I try to install the new Adobe Flash Player and my password does not work, but I can sign my Adobe account. I have reset my password and it still works for the account.

  It isn't... Adobe password, but your operating system password to install the software.

• Satellite P205: Touchpad does not work when the new adapter is connected

  I got a replacement charger for my Satellite P205 but put it has A 4.19 instead of 3. 95 has, they said that it didn't matter, but since I use the charger, I have the following problems:

  -Does not load properly and turns off after an hour.
  -The touchpad has a mind of its own when the charger is connected (windows opens if hovering over button, through the screan jumps when I try to move it, freezes and disappears)
  -Charger Word to say the laptop plugged in but not charging

  What can I do to remedy these problems, the laptop works perfectly when the charger is not plugged in?

  See you soon!

  Hello

  I guess that the touchpad worked correctly in the past with the former sector adapter.
  Is this good?

  Well, it seems that these questions are related to the new power adapter and I would recommend using a 100% compatible adapter.

  Check the AC adapter s old part number and if the issues could be resolved using this adapter.

• Re: Satellite Pro C850-15 t - device pointer does not work

  Hi all

  A few weeks before it has the feature of pointer (touchpad) on my TOSHIBA laptop suddenly stopped working for me. Ever since the error, I have connect a mouse to the laptop via a USB port, which can and has become rather a nuisance. Unfortunately, I have not the slightest idea when technology is wrong, but is there a way that the error can be corrected?

  Laptop model: SATELLITE PRO C850-15 t

  Thank you very much!

  -rcotterill

  What kind of error is displayed exactly?
  I do not know what operating system you use, but have you tried to reinstall the driver for the touchpad?

• Satellite Pro A300D - reinstalled XP - now its does not work

  Recently, I had a virus on my laptop Toshiba Satellite Pro A300D-14O, which meant that I had to take it to get reinstalled Windows.
  This tech guy who I gave it to a do.

  However, now, the sound does not seem to work properly.
  The volume on the laptop wheel itself does nothing.
  I tried to open Control Panel to check the sounds and audio devices, but I could not change anything in the boxes.

  I tried to download a driver from toshiba Web site was updated, but I thought that it could not find the device driver support.

  Can anyone help?

  Hello

  You must install the Win XP SP3!
  This package must be installed BEFORE installing the audio driver.

  Install SP3
  Then remove the audio driver (already installed) system
  Go to Device Manager and remove the sound chip of the list of devices
  Restart the device
  Now reinstall the sound card driver.

  Should work as it worked in my case as well

• Re: Satellite Pro A100 PSAA3E: after XP installation does not work

  Hello

  I recently bought a psaa3e Satellite Pro A100.
  I formatted and installed Win XP. Everything works except the sound.
  In Device Manager its shows a PCI device problem.

  I think I need the pci to install before my sound card is recognized.
  I could be wrong and often am installed all drivers I could find on this site for my laptop.
  Any suggestions please, its driving me crazy.

  brgds

  spadger

  The solution is simple.
  After installing Xp, you must install all the service packs. SP2 is important.
  In addition, you will need to upgrade the XP to the last State. All fixes and patches must be installed also.
  The * KB888111 * and * KB835221 hotfix * must be installed before installing the audio driver.

  After installing the hotfix, restart the computer, and then reinstall the audio driver!

  Good luck

• Satellite Pro P200: Reinstalled audio driver - microphone does not work

  Satellite Pro P200, bought Jan 2008.

  Managed to disable onboard intervene somehow, trying to disable them so that when I got the USB speakers loud the built-ins would not interfere with the sound.

  Driver installed P200_X200_Audio_Vis3264_6015477_1.exe.

  Speakers work fine now - microphone is not.

  Any ideas?

  Thanks, Dave

  Did you check the audio settings in Windows Vista?
  Maybe the microphone is muted or the volume is at the lowest level. Did you check that?

  In addition, I would recommend reinstall the sound card driver. Remove the old version first and then restart the computer and install the latest version on the Toshiba site.

  You use the factory settings or you have installed your own version of Windows?