Cannot install Win XP updates

Similar Questions

• Cannot install Windows XP update KB2718704; error # 0x800A138F

  Cannot install Windows XP update KB2718704; Get error # 0x800A138F. I would appreciate a mention of help on this issue. Thank you.

  (My Automatic Updates usually work, but this time not to go.) Updates are obtained through IE8 browser, but I prefer FireFox for daily use.)

  Thank you! Success!

  I used method 2, because I had already tried method 1 earlier, but the "fix it" went wrong. After reading the information from method 2, I opted to use my FireFox instead of IE8 browser, because I suspected that the process Internet Explorer that are included with the update was a large part of the cause of my problem. Among the options, I used Microsoft Download center to locate the update I needed and then through its validation and finally made the download and reboot. Voila!

  Can you please explain why the process more automated via IE did not work for me? Why I resorted to the labour process more that I used? Can I expect this of all the other "critical" updates that I get on my machine Windows XP Media Center Edition 2005? Maybe your answers would also be interesting to others.

• Cannot install Windows PLUS updates. -Modules Windows Installer has stopped working...

  original title: cannot install MORE Windows updates.

  Greetings, people. My computer will download, but not install many of the windows updated.

  I think it's because of 'message "Windows Modules Installer has stopped working and was closed". Is this correct?

  Can I fix it myself? Thank you, Bob

  Hello

  try looking here's FixIt pro windows update:

  http://support.Microsoft.com/kb/971058/en

  LC

• Cannot install Win 8 - Satellite Pro C660 does not detect HARD drive

  Hello

  My HARD drive died, so I decided to upgrade my Satellite Pro C660 - 1 9 to an SSD.
  I made a USB bootable with Win8 and starts very well.

  The problem is that it does not detect my SSD, so I can proceed with the installation.
  SSD appears in BIOS but not in Windows Installer.
  He said that there is a missing driver.

  I downloaded the AHCI drivers (XP, only ones available) and even in this case, after you have selected the only rider that appears, it says no new device found.

  I tried to change the SATA from AHCI mode to compatibility mode and it's the same thing...

  What can I do?

  Thanks for the help.
  Best regards
  Bruno Moreira

  More old Windows XP need a driver AHCI Intel's but I think this isn't a problem with SATA driver missing because as far as I know Windows 8 as well as Win 8.1 already contains the drivers to recognize the SSD or HARD disk drive.
  In addition, the installation of the OS should be possible even if the driver would be added for this procedure, you must use the "compatibility" mode
  As you say, the compatibility mode is not working too, so I think there is another problem.

  However, page driver Toshiba also provides a driver Intel RST (Intel Rapid Storage Technology) (Windows 8 - updated) you can try to add during the installation of the OS.

  But I m wondering if you would be able to install this Win 8 on common SATA HDD.
  Have you tried to format the SSD using a different computer, then install Win 8?
  Give it a try.

• 0 x 643, error code 0 x 80070643 - cannot install the new update

  Hello

  Make me

  0 x 643, error code 0 x 80070643

  whenever I try to run Windows Update. It says "check for updates", so I press it, but then he comes back with "to check the updates you must first install an update for Windows Update" - I press 'Install now' and she closes and opens again say it cannot install it or goes back to the message "check for updates".

  I tried both methods in the http://support.microsoft.com/kb/KB976982 article, but it is not fixed.

  What can I do now?

  Thanks in advance

  Rachel

  Hello

  Make me

  0 x 643, error code 0 x 80070643

  whenever I try to run Windows Update. It says "check for updates", so I press it, but then he comes back with "to check the updates you must first install an update for Windows Update" - I press 'Install now' and she closes and opens again say it cannot install it or goes back to the message "check for updates".

  I tried both methods in the http://support.microsoft.com/kb/KB976982 article, but it is not fixed.

  What can I do now?

  Thanks in advance

  Rachel

  Hey RachandGarry

  reqd the below information from microsoft about this error code 643

  http://support.Microsoft.com/kb/923100

  If this does not work, you will have to repost in the forum update windows for more tips

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  Walter, the time zone traveller

• Error Code 80604004 cannot install Windows security update KB 2296199

  Already tried "Microsoft Fix It" but no problems have been detected

  Hello

  1. what Microsoft 'Fix it' has been run on your machine?

  Follow the steps below and check, if it helps.

  Step 1:
  
  Disable all security software and try to install the updates.

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
   
  Note: Antivirus software can help protect your computer against viruses and other security threats.  In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Step 2:

  Follow the steps in the article below and check if it can help solve the problem.

  You cannot install some programs or updates

  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Cannot install Windows Vista updated system preparation tool

  I downloaded the update for Vista 32 bit system preparation tool, but when the program tries to install after initialization, the installation progress bar never appears, the installation seems to just "hang" and do nothing.  I tried to cancel the installation, but the program seems stuck, I use the Task Manager to cancel the installation.  I wonder why the tool cannot install on my PC after downloading.

  Hi mlzla,

  I hope you do well.

  No, if you do an upgrade on the spot, you will lose any program. The on-site upgrade process will take around an hour or two. It is very useful.

  I hope this information is useful.

  Concerning
  Rehman - Microsoft Support

• Cannot install Windows XP update KB2572073 and KB2539631

  Original title: (KB2572073) and KB2539631

  After the automatic update, I received these two errors which could not be installed.   A security update for the Microsoft.NET Framework 2.0 SP2 on Windows server 2003 and Windows XP x 86 (KB2572073)

  Update of security for Microsoft.net Framowrk 2.0 SP2 on Windows server 2003 and Windows XP x 86 (KB2539631)

  I was unable to find the instructions for updating this.  Thanks for your help.

  Hello

  Follow the steps in troubleshooting this article and check if that helps.

  You cannot install updates from Windows Update, Microsoft Update, or by using the auto update after a repair of Windows XP after installing Windows XP SP3 immediately after a clean installation of Windows XP SP2 or

  http://support.Microsoft.com/kb/943144

  See also:

  How to manually remove and then reinstall.NET Framework 2.0

  http://support.Microsoft.com/kb/908077

• Cannot install message of updates that Windows Update cannot currently check the updates because the service is not running

  Original title: update Windows impossible currently to check updates because the service doesn't work (Vista 64)

  I get the message: ' Windows Update cannot currently check for updates, because the service is not running. "  You may have to restart your computer. "I rebooted without change.

  I have Vista 64-bit with installed MSE and it cannot update its virus database.  I have also Windows Media Center put up a TV and may not be able to download an updated Guide.

  Can someone help me please?  I just finished a full scan of Malwarebytes and a full scan of MSE - both in Mode safe mode with networking.

  I found a few other forums similar to my problem, but I don't know that they are the same as mine.  I'm a little wary about some of the suggested corrections, so I thought I would like to get suggestions directly related to my problem.

  Thank you!

  Hello

  1. what exactly happens when you try to download the update for Windows Media Center guide? Do you get any error messages?

  2 did you do changes on the computer before the show?

  Method 1: Run the update utility

  See the following site:

  Problems with installing updates

  http://windows.microsoft.com/en-us/windows-vista/Troubleshoot-problems-with-installing-updates.

  Method 2: Start services

  Make sure that the following services are started:

  a. Windows Update

  b. Background Intelligent Transfer Service

  c. Cryptographic Services

  To do:

  a. click Start, type services.mscwithout the quotes and press enter.
  b. double-click the service and under Service status click Start, if it is not started.

  Method 3: Reset the update components

  See the following site:

  How to reset the Windows Update components?

  http://support.microsoft.com/kb/971058.

  Warning: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry .

  Method 4: Run the fixit

  See the following site:

  The problem with Microsoft Windows Update is not working

  http://support.microsoft.com/mats/windows_update/.

• Cannot install win 10

  I tried 4 times to install win 10

  3 times from Microsoft updates

  Once the download tool with the media

  I get this same result each time

  It downloads ok (win 10) then I get the Setup screen with the big circle and the percentage in it

  This files copy ok, and then restart the computer, then the installation continues and is now features drivers installation, that's fine, computer restarts again and should complete part 3, what configuration settings, the dell logo comes up then screen goes black, I waited an hour and it remained black no cursor showing

  After the time, which I turned off it and on again once he said to try to recover the installation, the screen went black, waited half an hour, nothing.

  It turned off again and after the logo dell, that said, restore a previous version of windows

  I tried 4 times

  It will not complete the installation.

  With the media the message tool download was "installation failed in the phase of second_boot with an error during the start operation.

  My computer is an Inspiron 17 (7737) earning 8.1 64-bit, dell said that it is up to date

  This could well be the culprit.

  Personally, I will no longer try upgrading to Win10 until I can update my BIOS.

  Just a reminder, better backup your system (and not just your data) and set your boot USB or DVD order (according to your solution to rescue is in) before attempting a BIOS flash Gordon.

  The BIOS updates are the equivalent of a radical maxillofacial reconstruction for laptops. We don't talk about popping a zit that B4 Wednesday night Wings & Angels Poker, many things can fool you when you try to make your interface look like the 2 moons of Kim K.

  Stay safe

• CANNOT INSTALL ANY WINDOWS UPDATES UNIQUE LANGUAGE 8

  I have a new laptop Windows 8 unique language. I tried to install updates without success.

  No error message

  Windows Installer: Installation Preparation - it runs for 'hours' no download or installation of updates.

  To see if she could take a long time because the total amount of updates are + - 700 MB, I tried to install/upgrade to update only a 43 k Update (security update Cumulative for ActiveX Killbits for Windows 8 for x 64 systems (KB2900986) - the download size: 43 KB.)  After 30 minutes, I stopped the installation as it shows only: prepare for installation

  I can't upgrade to Windows 8.1 without updates.

  My anti-virus updated fine, however no Microsoft updates don't want to download and install.

  No other Internet connection issues, etc.

  Data sheet:

  I5, third generation of processor.

  8 GB RAM

  Windows 8 unilingual, recorded.

  Help, please.

  Worsie

  Hi, thanks for the comments.

  I tried the method, but it has not fixed the problem.

  With respect to method 2, I bought the laptop with Windows 8 by-installed, so no DVD with the software.  I made contact with the distributor of the computer (Samsung), but the first reaction was to get a new version of Windows 8.1 and as they say, the unique language of Windows 8, which has been installed, although the real is a 'gift' and therefore they cannot provide the DVD.  I contacted both Microsoft and there response also had to buy a new license.  I can not fully used this problem as the update seems to be 'corrupted '.

  I noticed that the Proxy has been set to auto detect the Proxy settings.  I turned it off and some of the patches installed.  However, most hotfixes do not install and the same issue occur when trying to install.

  I always do if something goes wrong.

  Kind regards.

• Satellite L300 - 18 d - cannot install Win XP and Win 7

  Hi people,

  I inherited from my brother a Satellite l300 - 18 d...
  He has no BONES. When I try to put an XP installation disc I know work it crashes as soon as it gets to the first windows loading a party Executive.

  I'm trying to use the Win 7 disk, I also know the work and he gets the original file little 30 seconds loading, then it comes up a column just the letter h like that
  H
  H
  H
  H
  H

  ONLY THING I CAN THINK OF IS HARD DRIV IS GOOSED, BUT I DON'T WANT TO REPLACE SO EASILY CORRECTED.

  Hi mate

  I know that you would not be able to install Win XP without previous installation of the SATA driver.
  Another option might be changing the SATA mode in the BIOS
  Go to BIOS and change SATA AHCI compatible mode mode.
  Save the changes, and then try again to install Win XP.

  PS: it s recommended using a Win XP with at least SP2 or SP3 disk

• Cannot install Win XP - HDD has not been found.

  Hello

  I would like to install Win XP.
  Unfortunately, it does not work. The HARD drive is not found. .

  Please check these Toshiba forum discussions:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=26040

  You must install the Intel Matrix Storage first Manager by using the external USB FDD drive.
  If you don t have an external USB FDD drive and then use a freeware program called nLite.

  If you n t know how to use the program nLite then google a bit. There are enough websites that explain how to use the nLite.

  Good bye

• Satellite A300 - 1 2 cannot install Win Xp - lack HARD drive

  Hello
  I just bought a new Satellite A300 - 1 2 without an operating system. Now I would like to install Win XP, however, during the instalation, I get a message indicating that installation of windows is not all hard disks installed on the system. What could be the problem?

  Please don't be angry with me, but you search here in the forum for similar cases?
  I imagine that you didn t

  So, use the forums advanced search and the search option for driver SATA, Intel Storage Manager, etc.

  There are a lot of discussions about this theme

• Error code: 646 (cannot install the Office updates)

  Original title: WindowsUpdate_00000646.

  Update of security for Microsoft Office System 2007 (KB2289158)

  Update of security for Microsoft Office PowerPoint Viewer 2007 (KB2413381)

  Update for the filter of junk e-mail in Outlook 2007 (KB2443839)

  I get the message of theses errors trying to do these updates. Help, please?

  Hi caky51,

  You are able to correctly install the other updates?

  You can follow this link & check if it helps.

  Code error '0 x 80070646', '646', or '1606' when you try to install the Office updates

  Hope the helps of information. Please post back and we do know.
  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.