Cannot install Windows 10 OSX Boot Camp 10.11.8

Similar Questions

• Why my iMac (27 inch, mid 2011) cannot run Windows 10 in boot camp? And if he can't, he would work in something like parallels?

  Why my iMac (27 inch, mid 2011) cannot run Windows 10 in boot camp? And if he can't, he would work in something like parallels?

  To be honest, Windows 10 is compatible with your Mac, but Apple does not release from Windows 10 drivers for it. There are various guides on the Internet to install the drivers for Boot Camp Windows 10 even if your Mac is not supported, but follow them at your own risk (don't forget that you won't receive help to make).

  However, you are free to run Windows 10 on a virtual machine. To do this, you can use Parallels, VMware or VirtualBox, but remember that a virtual machine will give you less performance than Windows natively on your iMac. Read-> Windows in BootCamp or Virtual Machine?

• Cannot load Windows 7 using Boot Camp

  I am also unable to load Windows 7 on my MacBook using Boot Camp. When Boot Camp prompts Windows Setup disc, I put in the disc of Windows 7 Edition complete software Home Premium that I bought, and then my MacBook again request the Windows Setup disk and ejects the disc of Windows 7 Home Premium. On my MacBook, I have OS X version 10.8.2 and I've updated memory to 4 GB. What I am doing wrong?

  Delete and re-create the Boot Camp partition. If this does not work, use the Boot Camp Assistant to create a bootable copy on USB and use it to boot from to start the installation.

• Cannot install Windows 8 assessment (booting from the install image error)

  Hello

  I have problems to install Windows 8 assessment. When you start the virtual machine I can't boot from the installation of Windows 8 image to start the installation process. I always get this error message:

  

  I use a picture of Windows 8 x 64 downloaded from here: http://msdn.microsoft.com/en-us/evalcenter/jj554510.aspx. The VMware Player version is 5.0.0 build-812388.

  How can I solve this problem?

  Thanks for your help.

  Welcome to the community,

  This error occurs because Windows 8 requires the 'Execute Disable Bit' is activated. For VMware Player pass this parameter in the BIOS of the virtual machine, it must be enabled in the BIOS of the physical system. Make sure that the feeding cycle you your system after you change this setting in the BIOS, a simple reboot might not be enough!

  André

• MacBook Pro (2013) cannot install Windows 10

  So today, I'm trying to install windows on my MacBook Pro model 10 (2013). It is on the OS X EL Capitan and seems to be the latest version, there is no update in the app store of any kind. Then I started the installation process 10 windows by downloading a 64-bit version of Windows 10 ISO and then after the download I placed it on my desk. I then proceeded to bootcamp and unticked all options except 'create a later version or Windows 7 installation disk', because that's what I did there are 2 - ish years, when I installed windows 8, (but later uninstalled it due to problems of performance and overall, not like the software). I then continued by choosing my 32 gb lexar usb and my ISO image on the desktop and then received a message saying that Windows 7 or later version is only supported by bootcamp. I then went back and checked the first two options to download the latest software support for windows and always the same problem, also it does not seem that he downloaded anything.

  Any help would be appreciated.

  I think you should start with the documentation:

  

  Click the left button, open Boot Camp help.

  Create an ISO image for Windows installation media Boot Camp

  Use 10 Windows on your Mac with Boot Camp

  Boot Camp help

  How to install Windows using Boot Camp - Apple Support

  You may also have one of the following values after installing Windows Installer:

  • Boot Camp 5.1.5722 Support software
  • Boot Camp 5.1.5769 Support software

• Installation of Windows 7 in Boot Camp on 5K new Retina Display Mac computer

  I am installing Windows 7 in Boot Camp on a Mac new 5 K in Retina display. I can't do it in front of the window that is captioned, ' where do you want to install Windows? When I select a partition for the installation I get this message: "Setup was unable to create a new partition system or locate an existing partition in the system." What should I do next? Is there an incompatibility known between Windows 7 and the new Mac desktop?

  Please note that the 5K iMac only supports 64 bit versions of Windows 7 and Windows 8.1:

  So make sure that you run this architecture:

  https://support.Apple.com/en-us/HT204048

• Cannot install Windows 7 Professional 64 bit on HP Envy 4-1053TX (AVL)

  1. product name and the number: HP Envy 4-1053TX (B9K16PA #UUF)

  Windows 2 operating system installed 7 Home Premium 64-bit

  3 error message/symptom: blue screen * STOP: 0x0000007B (0FxFFFFF880009A9928, 0xFFFFFFFFC0000034, 0 x 000.., 0 x 000...)

  4. all changes made to your system until the problem occurred pre-installed Windows 7 Home Premium, trying to get at operating system level to Windows 7 Professional 64-bit using free license.

  5 cannot install Windows 7 Professional 64 bit which is open license. No player appears when Windows DVD/USB boot. Tried to install when Windows is running, appear a blue screen upon restart.

  Hello

  I see that you have a problem in the installation of new Windows USB port. It seems that your HDD was not detected, right? It's because your laptop uses a SATA HDD.

  what you need to do are:

  1. download the driver AHCI SATA website of intel. (just google it)

  2. copy the files (size 700 KB for 6 files) into the new USB

  3. reboot and install your laptop with win 7 (dvd/usb)

  4. by the time win 7 installation reached the drive to install (none detected), click load drivers.

  5. now load your other USB SATA drivers.

  6. then will show all disks in your system.

  7. continue with the installation process.

  hope this helps.

• Cannot install Windows PowerShell 2.0 and WinRM 2.0, Code 80070020

  Cannot install Windows PowerShell 2.0 and WinRM 2.0 for Windows Vista for x 64-based Systems (KB968930) Code 80070020.  I tried to install the update on 16/04/2012 (which is as far as my story goes).  Other updates were installing.

  Thank you

  E-mail address is removed from the privacy *.

  Hello

  You are able to install some other updates?

  Follow these methods mentioned below and check.

  Method 1: Sometimes, third-party applications may conflict with the installation of the security update, you can perform a clean boot and check if that helps in the installation of these updates.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After troubleshooting, be sure to start your computer in normal mode, see step 7.

  Method 2:

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-your-files

  You receive error 0 x 80070020 when you use the Windows Update Web site or the Microsoft Update Web site to install the updates

  http://support.Microsoft.com/kb/883825

  Warning: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3: Try to install the update manually and check.

  32-bit - Windows PowerShell 2.0 and WinRM 2.0 for Windows Vista (KB968930)
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=9864

  64 bit - Windows PowerShell 2.0 and WinRM 2.0 for Windows Vista for x 64-based systems (KB968930)
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=9239

  For more information, see this article: problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

• Cannot install windows 7, error: Windows cannot be installed to this disk. The selected disk is the GPT partition style.

  Original title: Install windows 7 on GTP style partition

  Nice day

  I try to install windows 7 on my laptop but there is a massege
  Say cannot install windows on the selected drive cos it's GTP
  Partion of style, I was using before windows 8 but then format
  My hard drive please guide me on how to archive this because only through
  I'm really frastrated

  Hi Nnrmalata,

  1. you are trying to install 32-bit or 64-bit Windows 7?

  2. What is the brand and model of your computer?

  Boot from GPT is only supported for 64-bit of Windows 7 on UEFI-based systems.

  For more details, refer to this link:

  http://msdn.Microsoft.com/en-us/Windows/hardware/gg463525.aspx

  If your computer does not support UEFI, back up your important data to an external drive and delete all partitions on hard drives and create a new partition.

  (a) start from the Windows 7 DVD

  (b) click on install now

  (c) in the configuration screen, click Custom (Advanced)

  (d) click on drive Options

  (e) select the partitions to format

  (f) click on Format - this will erase EVERYTHING on this partition

  (g) create a new partition, and then select a partition to install Windows on.

  (h) follow the on-screen instructions and install Windows.

  Note: Converting a hard disk partition or volume from NTFS to FAT32 requires that you reformat the partition, which deletes all the data on this subject. Be sure to back up data that you want to keep before you begin.

  You can check the link for reference:

  http://TechNet.Microsoft.com/en-us/library/dd799232 (WS.10) .aspx

  Note: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  If above did not help, please refer to the steps in this link.

  Note: Backup your important data to an external drive

  Change a Table of Partition GUID drive on a main boot drive

  http://TechNet.Microsoft.com/en-us/library/cc725797.aspx

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

• Cannot install Windows on this disk selected disk.the has a MBR partition table. On EFI systems, windows can be installed only on GPT disks.

  Cannot install Windows on this disk selected disk.the has a MBR partition table.

  On EFI systems, windows can be installed only on GPT disks.

  When I try to install WS2008R2 in my turn lenovo G580 i5-3210 as a dual-boot option.

  Hello Pratap ReddyBh,

  As you try to install Windows Server 2008 R2, it would be better for you to ask your question in the TechNet Windows Server forums.
  Click on the link here for TechNet.

  Thank you

  Marilyn

• No sound in Windows 7 with Boot Camp 4

  On a Mac Mini 32-bit running Windows 7 with Boot Camp 4. I use this set to the top due to other software, I need that requires 32 bits.  There is no noise from the CPU itself, no making helmet. I get the Mac sound at the start of the central unit, then Windows starts normally.  On the Device Manager in Windows two audio devices are: high definition Audio Device and display Intel. The State of the device on these two said they operate both correctly. I have an another Mac Mini that the sound is not working properly, and there a Cirrus S4206B. I tried to find how to add this device and driver for the CPU problem, but in vain.

  The audio works normally on the side of OS X?

  Check if the analog-to-digital composite on the mini has a Dim red light.

  Run msinfo32 on the side Windows and after return your BIOS setting.

  In Device Manager, click view and enable devices show hidden. See all device Cirrus?

• Cannot install Windows 7 on Envy 14-1211nr of HP recovery disc sent twice

  Cannot install Windows 7 on Envy 14-1211nr of HP recovery disc sent twice

  The Recovery Manager starts well. He correctly completed the following steps:
  1 format HDD

  2. copy the files from the CD to the drive. It copies all the 3 CD.

  Then he ask the driver (the 4th CD) CD. Once I have this CD, then after awhile I get messge below:

  Contact HP support

  In most cases, recover the hard disk will solve your problems.

  If your problem persists, you may have to contact HP support. Find details of support HO in the documentation of your PC.

  After that I see above meaage the only button I can click is "Finish". Once I click on finish, then in a minute, I get a message that "recovery completed successfully.

  The laptop restarts and displays the message on the screen "Bootmger" not found

  I called HP support and asked to run the hard drive and memory test and he succeeded.

  I can install windows on another CD I have with.

  But I can't install WIndows using the recovery CD, I received from HP. It's the 2nd CD series that I received these don't work or the other.

  I have two identical laptops. Tried installing on both and having the same problem on both.

  Can you please help with this.
  HP sends fake CDs?

  Kind regards

  Hello

  Here is another solution, you can try to see if you can get Windows 7 to install correctly.

  Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

  An example of a COA label can be seen here.

  You can create an installation disk yourself using another PC - just download the good Disk Image ( this must be the version exact same origin supplied with your laptop ) from the link below and use an app like ImgBurn to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write that an ISO on a disc is here.  These Images are clean and a well respected source, however there are only limited versions available.

  Windows 7 sp1-iso-official-32-bit-and-64-bit

  Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

  http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

  All pilots additional and the software, you may need can be found here.

  Kind regards

  DP - K

• Cannot install Windows 7 on Imac 11.2 with bootcamp 6.0.1

  Hello.

  I have a 21.5 "iMac (11.2) Mid 2010 with El Capitan fees." I want instala Win 7 on Boot Camp, using the 6.0.1 version. I ve tried to option but I can't go to second screen as says soft me "haven't found us the installation disc. "INSERTA a Setup disk and wait a few seconds until what the computer recognize."

  I have ISO, Bootable USB, but nothing seems to work for me.

  Any idea?

  Thank you.

  A Mid 2010 iMac requires a physical DVD of W7 to install.

• Cannot install Windows updates (has no status) on the computer desktop and laptop

  Desktop               (Purchase date: 13/07/2010)

  Model: Pavilion p6402f or 6402f

  Product: BK275AA #ABL

  Serial No.: {removed privacy}

  OS: Windows 7 Home Premium Service Pack 1 64-bit

  Product ID: {removed privacy}

  Portable               (Purchase date: 14/07/2011)

  Model: Pavilion g6 Notebook PC

  Product: QD317UA #ABC

  Serial No.: {removed privacy}

  OS: Windows 7 Home Premium Service Pack 164-bit

  Product ID: {removed privacy}

  Description of the problem: same problem on the computer desktop and laptop at the same time began: cannot install Windows updates (has no status)

  No hardware changes or software recently made to the system: I followed the usual procedure to install Windows updates.

  Method of connection: wireless

  Technical expertise: intermediate level

  Performed troubleshooting: because the error # 80071 A 90 type indicated by the system, I followed the instructions of Windows Help and Support, for example to run Microsoft Fix it which did not work; a more advanced method has also been used, who recommended to start Windows Update in Mode safe, then open Windows Update and install the updates and then restart normally. At this point, the problem was that any stage of Windows Update was available.

  Hello amib004,

  As much as I know, only Windows Update cannot be run in safe mode. That being said, I saw where install several updates may conflict with each other. Try to disable all updates installation and install the updates failed one at a time.

• Cannot install windows XP on the Satellite Pro A200-1N2

  Jin

  I have a Toshiba Satellite A200 - 1N2 PSAE3E and I don't want Vista on my laptop. I downgraded the bios to V5.30 but still cannot install windows xp and there is still no optin for SATA in the bios.

  Can someone help me?

  Thank you.

  Hello

  Did you install the SATA drivers first?
  You need this driver to recognize the HARD drive!

  You must download the Intel Matrix Storage Manager. You should find it on the page of the Toshiba driver or the Intel Web site.

  You must perform the installation of an external USB FDD drive using the F6 key during the installation of Win XP.