opening project CS5 in CC6 - edited clips my camera just in the wrong place in the images

Similar Questions

• After "Edit in photoshop", how to recover the image in lightroom?

  In LR, you can right click on an image and say "Edition in" then "Edit in Photoshop CC 14".

  It then asks if you want to change the original or a copy.  I say copy.  LR creates a virtual copy and launches the image in Photoshop.

  When you finish, you press save (or exit), and he asks me to save it under a new file name, which you simply press OK.

  Now in LR, no changes have been made to the copy, and your changes in Photoshop are not in LR. I see other people have the same problem.

  The fact that PS and LR have no transparent integration, and getting published photos in LR is so difficult, for the past 2 years, I have simply not using it, even though I pay for both.  It of a huge shame that LR and PS have many sophisticated features, but may not even share a file.

  I don't expect an answer, as others do not have a solution, but I must breakdown my frustration and I hope that maybe, someday, they will add this feature.

  There is no work around for this problem. If you try to manually import the newly modified file, it fails - for example, you go again to the library (which is slow) mode, then you say "import", then you use the file browser to drill down from the back in your directory (very slow) source, then you find the file created by the PS and try to import it , it says "the file could not be read" - LR can not open PS files.  I can, of course, then open PS, open the file, and then save the file as a jpg file, then slow down the whole process of manual import again, but it's simply too long.

  Try a direct download.

  You can get Photoshop CC 2015.1.2 here:

  https://helpx.Adobe.com/Photoshop/KB/UpToDate.html#CheckUpdates

  You can get LR CC 2015.5 here:

  https://helpx.Adobe.com/Lightroom/KB/Lightroom-downloads.html

• RAW file will not open in CS5 does not recognize my new camera

  I just put my CS5 on my new Mac and when I try to open a raw file, it gives me the following message appears: could not complete your request because the file appears to be a model of camera that is not supported by the installed version of Camera Raw. Please visit the Camera Raw help documentation for more information.  How can I get an update so that it recognizes my camera.  Thank YOU for helping.

  What is your new camera? Most likely, you will need to use the free dng, as CS5 converter if old enough and will be not supported current camera raw updates

  Adobe - Adobe Camera Raw and DNG Converter: for Windows

  Adobe - Adobe Camera Raw and DNG Converter: for Macintosh

• Transfer of first Clip in Premiere Pro compresses the images?

  Hi, if I transfer my first Clip in first Pro CC project, it seems that the video quality is compressed. How can I get the original image quality when I export my projects?

  Hi Martin,

  There should be no degradation in the media file when you export a Clip in Premiere Pro project. If you compare the original media file on your device in the synchronized file on your desktop, it should preserve the exact rate of the file of size, profile and ILO. You can watch this info yourself with an application like MediaInfo.

  Would be great if you can send a screenshot of what looks like the original file and what you see in Premiere Pro. You can also include which version of the Clip, OS and Premiere Pro, you have? Finally, this device created the file.

  Hope we can get this resolved for you.

  Thank you

  Peter Garaway

• CS6 - keyframe will not align on the end of the clip, it snaps just * before * the end

  If I move a picture on the screen, the final keyframe will jump not at the end of the clip (even if it align with the edge of the window). It is with the timeline to zoom-out keyframe. Once I have break the keyframe at the end, I have to manually zoom in on key images, find the last key frame which should be end of the clip, but it of not, and then drag it to the absolute end of the clip.

  Does anyone else have this problem? I have to do this every time!

  

  Screenshot 1: timeline Keyframe broke at the end of the clip, zoom out.

  

  Screenshot 2: timeline zoomed in, why is not the keyframe at the end?

  Hi Prizm4,

  This problem is fixed for first Pro CC (7.1). If you do not want to see this problem for CS6, please file a bug report: http://www.adobe.com/go/wish

  Please see Ann Bens post for a workaround: http://forums.adobe.com/message/4532252#4532252

  Thank you

  Kevin

• When I opened a blog that contains pictures and I want to save the image - it always says no title and now is bitmap vs. JPEG that you start happening - y at - it something I can fix or set so that the pictures were received in JPEG or bitmap? __

  I'm having a problem with the registration of the images of two 'groups' or 'blogs' - I can save them - but most say it all without title and then give him a number or a title, you - they are received as bitmap or JPEG.  My question is - is there something I can fix or address so that they will come as long as JPEG vs bitmap - this has changed recently and I don't quite see what I did to make this happen.  Thank you

  Try reseting internet explore and the Coachman, who should do the magic

• I just bought CS5 - CS6 update plan, but I can just test the software

  I work in CS 5.5 for awhile and decided to start the creative use of the Cloud. I signed in and ordered the offer which ends September 2 for businesses; This is to update a previous CS. The first payment is made, I installed creative cloud but when I go in the "Apps" menu it only allow me to test the software. I save the number of validation.

  How to install or update my older versions?

  allow at least a day working pst for your order to be processed.

  You can check the status of your order, Adobe ID Code

  Once you see that your subscription is active, the buttons of the trial should be replaced by install the buttons in your application to cc.  Otherwise, Troubleshooting FAQ: what should I do if I have a subscription, but my application acts as if I had a trial?

• I use a computer windows laptop, I use windows photo gallery to download pictures to computer.  then I open lightroom stand alone 6 and that are important. When the images are are import they darken.  WHY

  So, how can I solve my problems?

  Also if the steps above does not work, please try to check the following article: photos are black in Lightroom CC 2015.2/6.2

• So frustrated... have CS5 and whenever I try to use the clone stamp, it just does not move picture.  I click on duplicate, move the image to press option and the minute I move stamp image, it starts moving around image as if there are two pictures the

  Frustrated by the clone in CS5 stamp.  Whenever I go to the for use, it just moves the image as if I had multiple layers.  Is anyone out there can help with this?

  Check the palette Source of duplication for options that you forgot which allows...

• How to edit clips in the AE and put back them in the body? (CS5.5)

  Okay, then, here.

  I edit my main footage in Premiere Pro. I recently bought a denoising software which is only compatible with After Effects, so I've been using the denoiser plugin in After Effects. Once I changed my basic video cut in first, I select all clips (included audio) in the timeline panel and open in a new model of EI. Once it has been opened, I do all my video major alterations in AE (for example, noise reduction). Now, when I try to export the project as a project of first Pro (PP) and open it in the first, it does not load the project. It's just an empty sequence. This isn't a big deal, because I tried something else. I tried connecting the composition of EI EI to PP which works, but it is very slow and precomposes all individual clips in a video clip.

  So, just to go on it again, that's what I did: cut clips in PP > selected all the clips in the timeline of PP and them open in a new AE comp > published the individual clips inside the model AE w / effects that are not supported by PP (only AE supports the reductive effect) > open the AE comp edited pp > then the model came as a clip video précomposé instead of individual clips.

  So, my question is, how can I get the model of EI to stay as individual sequences when I open it in PP in case I need to adjust something? Is there a way to do this? Or should I just do the very last denoise effect?

  Two other things:

  (1) I noticed that it is extremely slow in PP to render a model of EI parts... is it just because of the added effects?

  (2) I transcode my videos to the ProRes 422 format before I put it in PP. Once I put the clips in AE and then again in PP (if I figure out how), the clips will always be the same ProRes codec? I need them to be the same codec due to the adjustment of colours and effects later in the post.

  Thank you if you can answer this! ANY help is appreciated! I have explained this about as good I can, so if you don't understand my question, just ask, and I'll try to give you more information. Thank you!!

  If you go to re - edit your shots in first after the application of effects in AE, so you better make the shots in AE with handles on them. Do not try and bring in a full movie. Nobody knows what they are doing it. I even add handles to my dynamic link shots in Premiere Pro and I rarely bring along only one at a time. To add handles, the simplest method is to drag the photo to another layer in the body and extend them the entry points and. You can also change the length of the comp in AE, but be careful, what AE returns no audio tracks to first so you will lose the audio sync if you're not careful. If I have a bunch of shots that need to be addressed in AE I fucks cut into body leaving plenty of room (handles) on entry points, treat and make in AE and bring back return it in Premiere Pro and make fine cut there. Suspicion of a freebie come: you don't have to put your whole movie in a single sequence. When you do what I just described, I will often change the transformed sequence and then bring this sequence in my editing of final movie. That's how films are cut. Each Act, perhaps even each scene is cut as a separate sequence, then the sequences are assembled in the film. Nobody I know features cuts to cut the entire project in a single calendar unless they are so tied to the time that the first edition is the one that they should go with.

  Second, yes it will take organization long to make shots turned into AE with effects because you went with effects and you also now run both applications at the same time on your system. See tha first response for the solution. You will work faster if make you things in AE and then replace the film premiered.

  Thirdly, if you transcode to any codec, then make the same codec, everything will remain the same. If you are using dynamic links, then the rendering will be to the same codec for the whole of the project first. AE bit depth always process uncompressed to the project until the pixels are sent to the renderer. There is no rendering for dynamic links settings. He always uses the same rendering and compression settings used in the first.

• In windows movie maker, I'm trying to open an old project. It opens, but there is no video clips - only x or empty clips. How can I get the original film clips show?

  In windows movie maker, I'm trying to open an old project. It opens, but there is no video clips - only x or empty clips. How can I get the original film clips show?

  I did a movie and released a dvd. Then, I moved my files from movie on an external hard drive to store files and free up space on my computer. So I went back to try a pull up the project and got every X / white clips. So now, I rebooted my computer with the video files I removed on the external hard drive and it still shows empty clips.
  Help.

  The red Xs indicate that Movie Maker cannot find the original source files.
  If the files are still available... just right click on the red Xs and go to the
  current location of the files source and you may be able to restore the
  path.

• PP CS6 will not open PP CS5.5 project on Mac Pro

  It goes like this:

  After having installed the suite Production Premium CS6 to replace my suite Production Premium CS5.5...

  I open PP CS6...

  The start screen for the new project/Open Project / Help appears...

  Select "open a project"...

  Choose my existing project...

  He said that it must be saved in a new file CS6...

  I give it a new name of file...

  He tells me that he doesn't have some 3rd party filters in the new...

  I click OK...

  He asks me to locate some missing plans...

  I click on "Skip All"...

  He opens my project; I see the chronology, etc...

  It auto-enregistre the new project is the opening...

  No matter what I do next, cancel the registration, it allow to save, the timeline, and then disappears...

  The computer barattes for awhile...

  The start screen for the new project/Open Project / Help appears again...

  It turns out to have not created a new project of CS6, so...

  Again, with the same results...

  This can last all day.

  I'm on a 2007 (then high-end) Mac Pro with 2 x 3 GHz Quad - Core Intel Xeon processor, Quadro 4000 card and 16 GB of RAM running Mac OS X 10.7.4

  I'll try-exporter and importer FCP XML but worry about losing some aspects of the project to export/import unnecessary.  This is a huge feature film project.  Since it should not do the above it makes me nervous also about stability, etc. of the book.

  Any thoughts would be appreciated.  Could not find this problem in existing wires, I apologize if I missed it somewhere.

  Thank you.

  Richard

  Typical troubleshooting first attempt for this kind of scenario: create a new project of CS6 & use the Import Project command to put in your draft 5.5 in.  Let us know if that fixes for you.

  See you soon

• Open projects CS4 CS5 error with Canon 5 d footage HELP!

  HI Im trying the new first Pro CS5 demo and Im getting problems of opening projects.

  At the beginning I couldn't open any of my CS4 projects but could import sequences simple one at a time only, not all projects. If I finally worked fine yesterday and today nothing opens that includes images of 5 d from canon. I get this error.

  "This project contains a sequence that could not be opened. No preview of the sequence is preset file or codec might be associated with this type of sequence. »

  I get the same message when I import an entire project. Yet I can import a sequence of the entire 1 at a time!

  I can only create new projects that save and open, but all former registered projects cannot be opened.

  Thank you

  remainz

  Read here:

  http://forums.Adobe.com/thread/629051?TSTART=0

• Unable to set keyframes in the audio clip selected with the pen tool - can no longer see the volume control line after developing the clip. What could be the problem? This seems to be the problem on any project that I opened.

  Cannot set keyframes in the audio clip selected with the pen tool - cannot see even the line volume control more to set keyframes on having developed the clip. What could be the problem?  I use the first CC pro @.

  You can use the Ctrl key and then click with the regular selection tool, clicking with ctrl will make a new keyframe. in this way, have no need for the tools. CTRL has other great shortcuts that will stop you having to spend retouching pads tools too.

  If the automation keyframe line is missing, you can switch on and off in the menu sequence.

  

• Update i-movie terrible!  Cannot remove rejected Clips.  Create and name the project issues.

  Someone has any idea how to remove rejected in the new update to i-movie clips?   Very difficult now to create new projects and name them.  Never wearing a name for the project.  Project tab does not.  Go to the projects through the tab of the window, and then go from there to the area of projects.   There is that an i-movie update just gets worse every time, and for the worse.   I don't think that people never updates actually use the product.

  See if that helps. (1) to remove the clip selection rejected rejected in the context menu above the media window. Right-click and choose Remove. (2) to create a new project click on project button on the top left of the window. In the projects list that appears click on create new and pick the movie. When the editing window opens it will say my default movie. Click the projects button again and you will be asked to name the film. You can also go ahead and edit your film add clips, etc. and if you share, you will also get an option to rename. At any time, you can go to the project and in this window button rename a project. I don't know what you mean by project tab does not. If you want to say, it does not appear or is not functional then launch iMovie, hold down the command and option and choose to delete the preferences. See if that fixes the project tab.