Cannot install windows 7 on a PC brand nine own because of "no pilot of the aircraft were found. Help, please?

Similar Questions

• no pilot of the aircraft were found when trying to install windows 7 on a new construction

  It is a new construction: card mother Asus M4A87TD/USB3, Phenom X 4 965 processor he's, with 1 64 GB Soild State drive which is where Windows 7 Pro must be installed, Raid 2 500 GB SATA hard drives that I use, total 8 GB memory Dual Channel DDR-1600 and an ATI Radeon HD5830 1024 GDDR5 video card.

  I am now trying to install windows and I get an error message saying that no device drivers found when you try to install windows 7 pro, so I tried to put in the disc that came with the motherboard because that's what I found during my research on this subject and it won't read the disc. I also learned that I should use a USB however, I don't have a large enough to copy documents from the disk device drivers.

  Any input would be appreciated because I was a machine now for a week only to find what I wanted and then in construction and now this problem - please help

  Suggest you only begin by installing a configuration non-RAID first. Also since this is a new construction, you need to do some test equipment to verify that you don't have a hardware problem. Connect a SATA drive to a standard SATA connector rather than the RAID connector.

  Set of utilities to test for computer HARDWARE manufacturers:

  Note: If you are OverClocking or use any automatic overclocking BIOS features, Intel EIST or Turbo Mode (turn off).
  then back at the speed of stock as a starting point.

  Disconnect the other internal hard drives and external USB devices.

  First try running Memtest86 +:  It runs from a floppy disk or CD, you must remove or
  confirm whether your one or more of your sticks of memory are bad or the values of the SPD in the BIOS are correct.
  Let it run for as long as you can: 2,4,6,8 or several hours (at least 3 full passes), if no errors at that time then your ram is OK.
  http://www.memtest.org/
  Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)
  http://www.overclockers.com/forums/showthread.php?t=409152

  Hard drive test - CD Bootable:
  If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools (bootable CD)
  and check bad sectors:
  http://www.Seagate.com/WW/v/index.jsp?locale=en-us&name=SeaTools&vgnextoid=720bd20cacdec010VgnVCM100000dd04090aRCRD
  For Western Digital disks using WdDiag: http://support.wdc.com/product/download.asp?lang=en
  Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
  Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm
  Hitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT
  Diagnostic tool available for use by customers who feel their Toshiba brand Fujitsu hard drive:
  http://SDD.Toshiba.com/main.aspx?path=ServicesandSupport/WarrantySupport/SoftwareUtilities
  Notice of suport Fujitsu disk utility: http://www.fujitsu.com/us/services/computing/storage/hdd/
  Toshiba CD bootable: (BACK Diagnostic Tool version 7.0 for IDE/ATA/SATA hard disks)
  http://SDD.Toshiba.com/main.aspx?path=ServicesSupport/FujitsuDrivesUSandCanada/SoftwareUtilities#diagnostic

  Once Windows is installed:

  Of device drivers: Have you installed latest device from the manufacturer of the motherboard drivers?
  Check their support site for the latest drivers as the CD that came with the motherboard may have
  older less stable drivers.

  Check the manufacture of graphics card download site: Download and install the latest drivers for Windows 7
  for your card.
  ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
  NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us

  See also the test of 'Smoke box' Nvidia or other demos: http://www.nvidia.com/object/cool_stuff.html#/demos
  or equivalent ATI.

  Prime 95:
  http://www.Mersenne.org/freesoft/
  It's a stand alone .exe file contained in an archive .zip.
  Simply choose to run the 'stress test' option for 3 hours or more.
  If your PC can pass this test, your memory and CPU
  are very good (close the housing cover in order to maintain adequate ventilation)

  Core Temp:
  The temperature of each core of the processor.
  Note: For the overclockers using stock radiator and cooling fan Intel/AMD, you can expect a temperature range of
  35 to 40 ° C at idle and 60-65 c max when running Prime95.
  http://www.alcpu.com/CoreTemp/

  CPU ID (CPUZ): http://www.CPUID.com/cpuz.php
  Watch the clock speed of the CPU under various conditions of loading
  (when using speed step technology Intel EIST).
  #1 Note:
  CPU - ID has two tabs (memory and SPD) that indicates the actual speed of the memory and 'SPD' tab displays the nominal speeds
  for each memory location is full.
  #2 Note:
  COMPARE the two values, the actual speed should not exceed the rated speed of your memory.

  CPUID HWMonitor: Hardware program that reads the sensors of health main PC monitoring systems.
  voltages, temperatures, fans speed.
  http://www.CPUID.com/HWMonitor.php

  Test of Stress of FurMark GPU (graphics card):
  http://www.oZone3D.NET/benchmarks/fur/

  Pass marks burn in test: http://www.passmark.com/
  Burnin test, and their test bench at the same time give a good workout from all the major parts of Windows.

  HD Tune:
  Provides information of the car and has an option (tab scan error) to test your drive.
  http://www.hdtune.com/

  SpeedFan:
  Monitors internal temperatures and has a function of analysis health online (SMART tab) for hard disks drive.
  It displays your drives model number and compares your drive with other discs of the same brand and model.
  http://www.almico.com/SpeedFan.php

  GPU - Z:
  A utility light, designed for you give information about your video card and GPU.
  http://www.techpowerup.com/GPUZ/

  PC WIZARD:
  A powerful utility designed especially for detection of hardware, also analyses more.
  He is able to identify a large scale of system components and supports the latest technologies
  and standards.
  http://www.CPUID.com/pcwizard.php

  Partition Wizard Home Edition:
  http://www.partitionwizard.com/free-partition-manager.html
  Note: There is also a CD bootable or versions of the bootable Flash drive:
  http://www.partitionwizard.com/Partition-Wizard-bootable-CD.html
  http://www.partitionwizard.com/bootable-Flash-drive.html
  Among the features and functions: create partition, Delete partition, format partition,.
  A partition resize, move partitions, Partition recovery after an accidental deletion,
  Convert the partition, partition Explore, Hide partition,
  Change the drive letter, a partition active Set, Explorer (content display) of the partition.
  Note: To complete any task use the "Pending Operations" box at the bottom left.

  Hiren BootCD
  http://www.Hiren.info/pages/Bootcd
  Hiren BootCD from USB (USB key)
  http://www.Hiren.info/pages/Bootcd-on-USB-disk
  (something more questions)

  UBCD4Win:
  http://www.UBCD4Win.com/index.htm
  UBCD4Win is a recovery CD bootable that contains software used for repairing,
  restoration or diagnose almost any computer problem.

  MyEventViewer - an easy way to display your event logs:
  http://www.NirSoft.NET/utils/my_event_viewer.html

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• Cannot install Windows 8.1 on my brand new HP laptop 2000-2d03SH (lack of storage driver)

  Hi all

  I just bought a new laptop from HP 2000-2d03SH with FreeDOS, but I bought a Windows 8.1 separatelly.

  Unfortunalety I can't install it on my new shiny HP notebook. (

  When I start Setup it is said that he can not find a suitable driver. It is sad that the pilot missing for some kind of storage device, but it is not to say every time.

  I downloaded all the drivers available on the HP site, but they are all .exe file so I can't use them.

  What should I do?
  Which driver should I unzip and try to use?

  Y at - it a driver pack appropriate I have to download and use for installation?

  Why it can't download the installer from the internet? (he connected with wire)

  Help, please! Currently, I can't use my new notebook at all! (

  Finally, I managed to install Win8.1 on the laptop. Not for freeOS so the problem still exists, but I installed Win7 first and I was able to install Win8.1 of Windows and not not not like booting from DVD...

• Cannot install Windows 7 on Envy 14-1211nr of HP recovery disc sent twice

  Cannot install Windows 7 on Envy 14-1211nr of HP recovery disc sent twice

  The Recovery Manager starts well. He correctly completed the following steps:
  1 format HDD

  2. copy the files from the CD to the drive. It copies all the 3 CD.

  Then he ask the driver (the 4th CD) CD. Once I have this CD, then after awhile I get messge below:

  Contact HP support

  In most cases, recover the hard disk will solve your problems.

  If your problem persists, you may have to contact HP support. Find details of support HO in the documentation of your PC.

  After that I see above meaage the only button I can click is "Finish". Once I click on finish, then in a minute, I get a message that "recovery completed successfully.

  The laptop restarts and displays the message on the screen "Bootmger" not found

  I called HP support and asked to run the hard drive and memory test and he succeeded.

  I can install windows on another CD I have with.

  But I can't install WIndows using the recovery CD, I received from HP. It's the 2nd CD series that I received these don't work or the other.

  I have two identical laptops. Tried installing on both and having the same problem on both.

  Can you please help with this.
  HP sends fake CDs?

  Kind regards

  Hello

  Here is another solution, you can try to see if you can get Windows 7 to install correctly.

  Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

  An example of a COA label can be seen here.

  You can create an installation disk yourself using another PC - just download the good Disk Image ( this must be the version exact same origin supplied with your laptop ) from the link below and use an app like ImgBurn to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write that an ISO on a disc is here.  These Images are clean and a well respected source, however there are only limited versions available.

  Windows 7 sp1-iso-official-32-bit-and-64-bit

  Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

  http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

  All pilots additional and the software, you may need can be found here.

  Kind regards

  DP - K

• ThinkPad R60 cannot install Windows XP After erasing the HARD drive using the lenovo diagnostic utility

  WinXP pro Setup cannot find that any installed HARD disk so cannot install windows. Unfortunately after many attempts to use rescue and recovery to restore the factory settings and for some reason constantly default... After leaving another utility popped up giving me the opportunity to erase the HARD drive and so I did... After fact as well and all I had was a blank screen, no windows more or no matter what utility to reinstall windows, then I used my winxp pro installation CD, but the program installation would continue not after a certain point by saying that the installation did not find any HARD disk installed. followed by "ensure that any disk HARD r turned on and correctly connected, and that no matter what material associated drive configured correctly, this may involve running a manufacturer provided diagnostic or Setup program. Clearly it took me by surprise. What was supposed to be a cut to white erase and reinstall now me baffled and angry. Formats the HDD of the solution? If so why didn't not the usefulness of lenovo do... If not, what is the problem? Someone help pls

  Welcome to the forum!

  Go into the BIOS (F1 at startup), set the "compatible" SATA mode (NO AHCI), then press F10 to save and exit, and you should be all set.

  Good luck.

• Cannot install Windows server 2012

  Cannot install Windows server 2012. Whenever I get * error

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Cannot install windows 7 using the uefi on hp laptop

  Cannot install windows 7 in uefi on computer mode hp laptop.

  What is the error you received? Generally the new laptops are designed as is not compatible with windows 7, as a mine.

  When I try to install W7 it up without hard drive found.

• Cannot install Windows 10 on T460s with Samsung 950 PRO NVMe M.2 SSD

  I can't install Windows 10 on my T460s brand new. It was delivered with Windows 7.

  1. The original Windows 7 starts fine
  2. I started the installer of Windows 10 bootable USB
  3. I deleted all the partitions on the system and then tried to create a new
  4. The error message is displayed:

  Windows cannot be installed on this drive (show details)

  Windows cannot be installed to this disk. This computer's hardware may not support booting to this disk. Ensure that the drive controller is enabled in the BIOS menu.

  SSD: Samsung 950 Pro NVMe M.2 SSD, MZ-VKV512

  BIOS Lenovo: 1.11

  Windows ISO 10: en_windows_10_n_multiple_editions_version_1511_updated_apr_2016_x64_dvd_8710592.iso

  Check in the BIOS, UEFI boot is selected for the startup to STARTUP tab.

  You must also reset the configuration of the disk on the 950.

  1. start the Windows 10 ISO

  2. launch the command prompt (Admin)

  3. type Diskpart

  4 locate the SSD in the volumes

  5. type Diskpart/select volume # (SSD)

  6. type Diskpart / clean

  Output

  Start the Windows 10 ISO

  Installing Windows 10 should now work.

• Cannot install windows 7, error: Windows cannot be installed to this disk. The selected disk is the GPT partition style.

  Original title: Install windows 7 on GTP style partition

  Nice day

  I try to install windows 7 on my laptop but there is a massege
  Say cannot install windows on the selected drive cos it's GTP
  Partion of style, I was using before windows 8 but then format
  My hard drive please guide me on how to archive this because only through
  I'm really frastrated

  Hi Nnrmalata,

  1. you are trying to install 32-bit or 64-bit Windows 7?

  2. What is the brand and model of your computer?

  Boot from GPT is only supported for 64-bit of Windows 7 on UEFI-based systems.

  For more details, refer to this link:

  http://msdn.Microsoft.com/en-us/Windows/hardware/gg463525.aspx

  If your computer does not support UEFI, back up your important data to an external drive and delete all partitions on hard drives and create a new partition.

  (a) start from the Windows 7 DVD

  (b) click on install now

  (c) in the configuration screen, click Custom (Advanced)

  (d) click on drive Options

  (e) select the partitions to format

  (f) click on Format - this will erase EVERYTHING on this partition

  (g) create a new partition, and then select a partition to install Windows on.

  (h) follow the on-screen instructions and install Windows.

  Note: Converting a hard disk partition or volume from NTFS to FAT32 requires that you reformat the partition, which deletes all the data on this subject. Be sure to back up data that you want to keep before you begin.

  You can check the link for reference:

  http://TechNet.Microsoft.com/en-us/library/dd799232 (WS.10) .aspx

  Note: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  If above did not help, please refer to the steps in this link.

  Note: Backup your important data to an external drive

  Change a Table of Partition GUID drive on a main boot drive

  http://TechNet.Microsoft.com/en-us/library/cc725797.aspx

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

• Cannot install Windows 2000 on SatPro 4600

  Hello

  I have a SatPro 4600, earlier, I got ACPI Bios error when you try to start Windows.

  Is it possible to disable ACPI in the Bios, I couldn't find any option in ACPI Bios 2.60 to turn it off.

  The I formatted the hard drive and try to install Windows 2000 from scratch. But for Setup is copying files to start the installation program, it comes up with an error message.
  "Setup cannot copy the file"File_name"

  And will not let me continue with the Setup program.

  Help, please.

  Hello

  I can't help you much about it, but maybe this article can help you. Check http://support.microsoft.com/kb/319344/en-us

  Good luck!

• Cannot install Windows updates (has no status) on the computer desktop and laptop

  Desktop               (Purchase date: 13/07/2010)

  Model: Pavilion p6402f or 6402f

  Product: BK275AA #ABL

  Serial No.: {removed privacy}

  OS: Windows 7 Home Premium Service Pack 1 64-bit

  Product ID: {removed privacy}

  Portable               (Purchase date: 14/07/2011)

  Model: Pavilion g6 Notebook PC

  Product: QD317UA #ABC

  Serial No.: {removed privacy}

  OS: Windows 7 Home Premium Service Pack 164-bit

  Product ID: {removed privacy}

  Description of the problem: same problem on the computer desktop and laptop at the same time began: cannot install Windows updates (has no status)

  No hardware changes or software recently made to the system: I followed the usual procedure to install Windows updates.

  Method of connection: wireless

  Technical expertise: intermediate level

  Performed troubleshooting: because the error # 80071 A 90 type indicated by the system, I followed the instructions of Windows Help and Support, for example to run Microsoft Fix it which did not work; a more advanced method has also been used, who recommended to start Windows Update in Mode safe, then open Windows Update and install the updates and then restart normally. At this point, the problem was that any stage of Windows Update was available.

  Hello amib004,

  As much as I know, only Windows Update cannot be run in safe mode. That being said, I saw where install several updates may conflict with each other. Try to disable all updates installation and install the updates failed one at a time.

• Cannot install windows XP on the Satellite Pro A200-1N2

  Jin

  I have a Toshiba Satellite A200 - 1N2 PSAE3E and I don't want Vista on my laptop. I downgraded the bios to V5.30 but still cannot install windows xp and there is still no optin for SATA in the bios.

  Can someone help me?

  Thank you.

  Hello

  Did you install the SATA drivers first?
  You need this driver to recognize the HARD drive!

  You must download the Intel Matrix Storage Manager. You should find it on the page of the Toshiba driver or the Intel Web site.

  You must perform the installation of an external USB FDD drive using the F6 key during the installation of Win XP.

• Cannot install Windows 7 Professional 64 bit on HP Envy 4-1053TX (AVL)

  1. product name and the number: HP Envy 4-1053TX (B9K16PA #UUF)

  Windows 2 operating system installed 7 Home Premium 64-bit

  3 error message/symptom: blue screen * STOP: 0x0000007B (0FxFFFFF880009A9928, 0xFFFFFFFFC0000034, 0 x 000.., 0 x 000...)

  4. all changes made to your system until the problem occurred pre-installed Windows 7 Home Premium, trying to get at operating system level to Windows 7 Professional 64-bit using free license.

  5 cannot install Windows 7 Professional 64 bit which is open license. No player appears when Windows DVD/USB boot. Tried to install when Windows is running, appear a blue screen upon restart.

  Hello

  I see that you have a problem in the installation of new Windows USB port. It seems that your HDD was not detected, right? It's because your laptop uses a SATA HDD.

  what you need to do are:

  1. download the driver AHCI SATA website of intel. (just google it)

  2. copy the files (size 700 KB for 6 files) into the new USB

  3. reboot and install your laptop with win 7 (dvd/usb)

  4. by the time win 7 installation reached the drive to install (none detected), click load drivers.

  5. now load your other USB SATA drivers.

  6. then will show all disks in your system.

  7. continue with the installation process.

  hope this helps.

• Error code: 80246007 (cannot install Windows Live Essentials 2011)

  I don'tseem able to install updates automatic, quest is my wide ban and they switched to norton antiviris of a care of windows live, had problems since I went.  Cannot install windows live essentials completely, still the same code error 80246007.

  I already changed the setting in "bits" to allow updates to day and downloads by following the instructions in the help, no change can not load low HP Essentials * msi.

• Cannot install window updates 14 altogether 646 of the code

  Cannot install window updates 14 altogether 646 of the code

  luckyslap,

  read the problems known in this page, they explain what to do. There is a link to a fix the article.

  http://support.Microsoft.com/kb/2258121

  Let us know if this helped.