Cannot install windows 7 using the uefi on hp laptop

Similar Questions

• I can install windows 7 using the windows vista product key?

  I can install windows 7 using the windows vista product key?

  I can install windows 7 using the windows vista product key?

  Hey angelside

  None

  You cannot install windows 7 using the vista product key

  You can buy windows 7 and then you will get the own product key windows 7 install

  read the windows 7 price microsoft below link

  http://store.Microsoft.com/Microsoft/Windows-Windows-7/category/102

  Walter, the time zone traveller

• Cannot install windows XP on the Satellite Pro A200-1N2

  Jin

  I have a Toshiba Satellite A200 - 1N2 PSAE3E and I don't want Vista on my laptop. I downgraded the bios to V5.30 but still cannot install windows xp and there is still no optin for SATA in the bios.

  Can someone help me?

  Thank you.

  Hello

  Did you install the SATA drivers first?
  You need this driver to recognize the HARD drive!

  You must download the Intel Matrix Storage Manager. You should find it on the page of the Toshiba driver or the Intel Web site.

  You must perform the installation of an external USB FDD drive using the F6 key during the installation of Win XP.

• Cannot install Windows 8 on the replacement hard drive

  I got the replacement from Dell hard drive which he said would come with Windows 8 and pre-installed drivers. Well, I installed the hard drive and he said no. OS can be found. I didn't have a chance to make my own backup discs, but Dell sent a CD Windows 8 recovery media with the laptop and now with the replacement hard drive.

  When you try to install Windows 8 on the new hard drive, I get to the part where it tells me to choose a partition to install Windows 8 on and none of them will not let me. There are 5 to choose from and I don't know what to do to get past this. The largest partition either 5A about 934 GB of space left out of 1 TB, but as I said I can't choose it or one of the other ones for the installation.

  You just have to click on next, in any case, despite the message?  Otherwise:

  Start on the DVD of Windows 8, instead of install now, click repair your computer, Advanced Options, invites ... when it opens, type the following:

  DiskPart
  Select disk 0
  clean

  Then, try to install.

  The above will remove all the data partition and disk, allowing you to do a clean install on an empty drive (these scores are not required, and Windows will create its own partitions (two) he needs to install and run).

• Cannot install Windows XP on the Qosmio F50-108

  I got the Qosmio F50-108 with Vista.

  I dislike Vista so I tried to install XP.
  Unfrtunatelly, I get a BSOD every time XP takes over for the first time (startup). Usually, when there is a problem of sata, XP tells you while there's no HARD drive, but I do not get this message, I get a BSOD.
  I don't know why there is no support for XP in fact I know that Microsoft paid toshiba to stop supporting Windows XP.

  Is the thing that drives me crazy, YOU CAN INSTALL WIN XP ON EVERY APPLE COMPUTER MACINTOSH, but you can't do it with a Toshiba.

  I know that there is a possibility, I know that an update of the bios might help, but toshiba does not.
  Dear Sirs to Toshiba, I know you know what I have to do in order to get XP running on a Toshiba computer, so please, help me.

  Hi guys

  You can install XP on each laptop Toshiba. But you knew how! : D

  Your Windows XP CD must contain the SP2. This is important because the new laptops no matter which manufacturer need SP2 patches due to some hardware compatibility issues!
  Without the SP2, you will receive a BSOD!

  Then, the new notebooks support SATA drives hard and new SATA controllers!
  Windows XP and Vista operating systems do not contain the SATA drivers, and therefore you must include first before running the installer of the OS.
  Or you can disable the SATA in the BIOS. You will need to switch from AHCI to compatibility mode.

  Then, you must install the XP window successfully.

  So finally, I must say that I really don't understand these comments like this:
  > Is the thing that drives me crazy, YOU CAN INSTALL WIN XP ON EVERY APPLE COMPUTER MACINTOSH, but you can't do it with a Toshiba.
  OK, I see you're frustrated because you cannot install the operating system, but he must know that this is not a problem of laptop, but it is only a case or a knowledge!
  So maybe you should learn more about new technologies and you'll know how things are working. ;)

  To all here-> greetings & peace;)

• Cannot install Windows 7 from the external DVD

  I got the Macbook Pro 13 "Early. 2011 Super DVD player has been broken. So, I bought a new hard drive (750 GB) and the original hard drive (320 GB). I change the position of the hard disk, I put 750 GB as the first hard drive and 320 GB as a second hard drive (by using the drive caddy).

  The current operating system is the Version OS X El Capitan 10.11.2.

  So I try to install Boot Camp using Boot Camp Assistant.

  Boot Camp Startup Wizard

  Presentation of the boot - you need an optical drive to install windows, so I plug my external DVD and put it inside the Windows 7 Installer, click on continue.

  Create or remove a Windows Partition - I select Macintosh HD (750 GB) and create a second partition for Windows, press to continue.

  Create a Partition for Windows - resize the disk partition of 750 GB became 498 for OS X and 250 GB for Windows. Tap on install.

  Partition drive...

  After the system restart and boot from external DVD

  The display flashes only _, I waited 10 minutes... does not.

  Reboot again without using external DVD, only a white screen (2-3 minutes) and appear only flashing _

  I tried using

  1 USB key and still the same.

  2. repair Boot Camp after having created the new partition

  3 remove the hard disk and install mac OS X using internet recovery, install OSX Lion, a Lion training camp and try to use refit, does not.

  Can someone help me?

  

• Cannot install Windows 7 on the computer

  Hi my name is Mauricio Osorio, recently, I tried to install Windows 7 on my computer, but it does not work, then I tried to re - install my Windows 8.1 license, but my computer has two drives, all first it's a ssd (Solid disc) and the other is sata, the most common of the disc type. My problem is: I don't know how to use this because it is so small (25 GB) ssd drive, but it is really fast, I tried to install Windows on it, but is so small and it does not work. What should I do?

  If as you indicate the SSD is small it almost certainly was not used as a disk operating system, but as a buffer high speed for the main SATA drive.

  The factory restore should recover the disks in the correct way before you tried to install Windows 7, you have created the.

  If you want to set this function yourself then how exactly depends on the chipset. With the driver Intel Smart Response Technology, you will need to install Windows on the SATA drive then in the driver control panel define the SSD as its buffer.

  http://www.Intel.com/content/www/us/en/architecture-and-technology/smart-response-technology.html

• Cannot install Windows 8 with the new drive, because the key will not

  I just rebuilt a 64-bit pc. I had windows 7 on it and decided to do a clean install of windows 8. Bought a version OEM from Amazon yesterday. Arrived today and the disc was in double sealed package of Microsoft Corporation.  The package comes with the key in very small print on the back that I had to read with a magnifying glass. This key is not accepted during the installation of the software. I checked that it was OK and I tried several times but the key has not been accepted. What should I do now?

  Hello

  I assume you are using the disk that came with the OEM key to install your system? If you are then the only people who can help you is the team of Microsoft License, you can contact them here:

  The United States customer service phone number is:
  1-800-Microsoft (642-7676)

  If you need a different language, please see this list http://support.microsoft.com/gp/customer-service-phone-numbers

  I hope that these tips help you a bit

• Portege M400 - cannot install Windows XP on the new HARD drive

  Hello here is my problem,

  I bought an older Portegre M400 E, without a HARD drive. So I buy a new Samsung 400 GB. I looked in the Bios (ACPI BIOS Version 3.40) and it is ok. He shows me the HARD drive with built in Assign LD - 0 status ONLINE, 400 GB size so it seems to be nice. Changed the matrix Raid, described in the manual, in condition to create 1Raid-0
  So, I want to boot from the Windows XP CD, not recovering my own.

  Windows open to the top and after a short period, the installation ends with the message that it is not any HARD drive. This I try sometimes :-( Hope someone can help me.
  Do not forget that I didn't have any HARD disk with the dates of the laptop.

  Thank you Carsten
  (Sorry my English is not so good Im from the Germany)

  Wilkommen!

  > Changed the matrix Raid, described in the manual, in condition to create 1Raid-0

  I don't know much about your model, but I think that something wrong with the raid in the Bios settings. What other options are available in the Bios for the State of the hard drive? I found the RAID driver on the Toshiba driver page. It is possible, that you can integrate in with a program called nlite Windows installation disc or install Windows as in compatibility mode, and install the Raid driver. then

• Satellite A660 - cannot install Win 7 using the external DVD drive

  Hello!

  Not so long I asked help to reinstall win 7 on my laptop.
  The only option was actually in the restoration of order dvd what I did. Today, it has arrived.

  Problem is, or was that some of the CD or the DVD couldn't be read for some reason any.

  Now it won't boot from the cd, it says faulty hard drives.

  So what I did I have pluged my detached external DVD drive and it started from that.

  But just after a few seconds, she told me to '1 support recovery' and open the drive in the laptop. Tried to insert the disc - nothing, like its not inserted, tried to disable computers portable cd - nothing please help

  Hello

  You should first check if the external CD/DVD drive is recognized as a boot device.
  Connect the external USB CD/DVD drive and switch on the device.
  Press F12.

  Now, you will see all bootable devices. Generally, the CD/DVD USB drive should appear if his support. If it does not appear, you will not be able to boot from the external USB CD/DVD drive.

  In this case I recommend you to create a bootable USB flash memory and install Windows 7 from USB flash memory

• Cannot install windows 7 on the computer hp laptop 15 r014tx

  I bought 15 HP r014tx windows 8.1 pre installed I want to downgrade to windows 7 but I can't install it. Please suggest any method to install it. If anyone has the same laptop and install windows 7 Please suggest...

  Hello

  Try this

  You will need to DISABLE "Secure Boot" and ENABLE "Legacy Support" in the "Configuration of the BIOS start-up secure" on the settings page similar to what is shown below, until you try to install Windows 7.

  

  

• Cannot run Windows Explorer using the interactive services detection

  Hello

  I have the tool using the interactive services detection to display applications. I have to refrain from using the Terminal Server services for the moment and the DSI is the only option I have. Now the problem is, this tool must run Windows explore periodically as well as other applications Viz Notepad, wordpad. It shows notepad and wordpad but always fails to open windows Explorer. Any ideas on that?
  PS: everything what I described above works great with the Terminal Services
  Thank you
  Madhu

  Hi Madhu,

  The question you posted would be better suited for COMPUTING public Pro on TechNet. I would recommend posting your query in the TechNet Forums to get help:

  Windows 7 security TechNet Forums

  Let us know if you need help with Windows related issues. We will be happy to help you.

• Cannot install windows updates after the recent update of norton

  Appears to download upodates then it not install them and reverts the changes. Have tried disabling Norton Firewall, but did not work. Someone at - it suggestions? Thank you

  Contact norton support

• Cannot install Windows XP after the purchase of disk

  I put the disk for Windows xp, but cannot be installed

  You should really start a new thread on this question of yours.  I'll send a message to the moderator to separate this question from this old thread and create a new one for you.

  In any case, if you have installed vista, xp will not be able to install automatically. It's because you try to downgrade your computer.

  However, if the computer already had xp on the computer, and then you could upgrade to vista automatically.

  You'd have to do is to format the hard disk in the first place, until xp can be reinstalled.

  But there may be another problem for you at this time.

  You see, if you have a computer that has been designed to use vista then xp is maybe not able to work on this computer.   You will have to go place of origin of the computer and see if your machine has hardware drivers that can be used by xp.  In others, you should check if there are drivers xp for your computer model.

  If this is not the case, then it means that your computer cannot start xp, even if you reformat the hard drive and install a new copy of xp on it.

  What is the brand and model of your computer?

• Cannot install Windows Server on the new server Poweredge T110 II 2012

  HI - just took delivery of my new Dell PowerEdge T110 II with two 1 TB drives in RAID 1, but without any operating system installed.  On the Windows Server 2012 Standard edition installation, the installation routine is unable to detect readers when it comes to choosing the installation location.  I can 'find the pilots', but on the insertion of the Dell supplied DVD, it does not find everything.  I changed different settings, rebooted and tried several times without success.  Entering the system at boot configuration screens, I can clearly see my 2 x 931GB disks and the virtual drives installed on them (I even removed the implementation of RAID and the virtual drives at some point to see if that was the problem).  Any help appreciated.  Regards, Barry

  Hello Barry

  You should have received a disc entitled management of system and Documentation Tools. If you start on this DVD, it takes an option to install an operating system. Follow the on-screen instructions and it should load the required drivers. If this does not work then let me know what RAID controller you have.

  Thank you