Cannot install Windows 7 Ultimate Pack of new Oem integrators

Similar Questions

• Cannot install windows vista service pack 1, 57 gives error code

  When you install windows vista service pack 1 that it says code 57 Windows update has encountered an error can someone help please?

  Hello

  (1) what is the exact\complete error message you get?
  (2) remember to make changes to the computer before the question?
   
  See the methods mentioned below and check if that helps.
  Method 1:
  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
  http://support.Microsoft.com/kb/2509997
  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  Back up the registry
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry
  Note: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.
  Method 2:
  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
  http://support.Microsoft.com/kb/947366
  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  Note: You should not turn off Windows Firewall unless you have another firewall is enabled. Turning off Windows Firewall may make your computer (and your network, if you have one) more vulnerable to damage caused by worms or hackers.
   
  Method 3:
  The problem with Microsoft Windows Update is not working
  http://support.Microsoft.com/mats/windows_update/
   
  Hope this information helps.

• Cannot install Windows Vista Service Pack 2. The following error message appears: 0X800707d1

  Hello

  Three years ago, I bought a Dell Inspiron 1525 laptop. Never met a problem until I tried to install Windows Vista Service Pack 2. I already followed each step instructions Support of Microsoft issues Service Pack for any result or solution. In these cases, I have downloaded the pack update directly from the wepage of Windows Vista, installed Windows Update Readiness Tool, disabled my antivirus (McAfee) and came up with nothing. I even tried to install this update in Mode safe but also failed to install Service Pack 2.

  What is happening all the time, is that I double click on archive downloaded in order to install (having already started my computer in Mode safe mode with networking reportoire and disabled the antivirus as well as its firewall). The Service Pack window opens and I click 'Next' for all the necessary instructions, including 'the computer automatically restarts. When the toolbar installation is completed, the computer automatically goes to restart itself. 3 steps appear as a requirement for the completion of the installation process. All goes well until he reaches "step 3 of 3:100% finished. Do not turn off your computer. After about ten minutes of stall in this step, the following message appears on the screen: "the Service Pack cannot be installed, returning from changes. Do not turn off your computer.

  The computer then rolls back all the changes and initiated in the normal state. After the opening, the first window that appears displays the following message: "the specific driver is not valid. "(Details): error: ERROR_BAD_DRIVER (0x800707d1). I proceeded to check and update alone driver of my computer, then try again to install the Windows Vista SP2 and all the operation has been a failure. I was cracking my head trying to solve this particular problem, and each time the same error pops up. I am seriously considering reformatting Windows Vista from manufacturer CD from my Dell, but I don't know if that would help.

  If someone could help or advise with everything that I would appreciate it a lot.

  Kind regards

  Rodrigo

  Hello

  Method 1: Follow the steps from the links below and check if the problem persists.
   
  Step 1: Safe Mode
  I suggest to start the computer in safe mode, then try to remove the Briefcase icon and check if it helps.
  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
  If the problem persists, I suggest you follow step 2 and check.
  Step 2: Clean Boot Mode
  I suggest to maintain the computer in clean boot mode and check if the problem still persists. A clean boot to check if startup item or services to third-party application is causing this issue.
  You can read the following article to configure the computer to boot:
  http://support.Microsoft.com/kb/929135
  Note: After the troubleshooting steps, please refer to clean the start link to configure the computer to normal startup mode.
  Method 2:
  Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates
  http://support.Microsoft.com/kb/949358
   
  Hope this information helps.

• Cannot install Windows vista service pack 2

  OT: used to install service pack 2 for vista
  : TRY TO INSTALL IT SAYS CANNOT INSTALL THEN RETURNS TO ORGINALL PARAMETERS CAN SOMEONE HELP

  Hi Sime JX,

  1. What is the accurate and complete error message you get?
  2. you try to download and install Windows vista Service pack 2 or install through Windows updates?

  Method 1
  I suggest you perform the clean boot and then install Windows 7 service pack 2.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: Follow step 7 clean boot KB929135 article to reset the computer in normal mode.

  Method 2
  I suggest to turn off all antivirus and firewall on the computer and then try the steps from the following link:

  Disable the antivirus
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
  Note: Microsoft does not recommend that you disable the antivirus protection in most conditions. Disable the antivirus protection that temporarily to restore a computer.

  How to get the latest version of the Windows Update Agent to help manage updates on a computer
  http://support.Microsoft.com/kb/949104

  Method 3
  I suggest you make the SFC scan.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

• Cannot install Windows xp service pack 3

  I am running windows xp with service pack 2.

  Whenever I try to install service pack 3 by using the automatic update, only lasts a few hours installation, then stops with "access denied."  This has happened for several months.

  PAM and Jeff,
  While you have found the information which had been requested by PA Bear, you can go through this article as well:
  Steps to take before you install Windows XP Service Pack 3.  So I suggest that you download the SP3 on your desktop and run from there.  You can download it here:http://support.microsoft.com/kb/322389 Mike - engineer Microsoft Support responses
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot install windows vista service pack 1 and 2 error: 8007006E

  Original title: Windows Service Pack 1 and 2 will be not updated

  I tried a few times to download the Service packs 1 and 2 so that I can reinstall my Windows live messenger. I didn't have time to let it run full the last time, but this time, her gives me: "error (s) found: Code 8007006E - Windows has encountered an unknown error.

  Usually I have no problem with my updates, they fit very well. This time, of course when I need it, he decides to not work (Murphey's law).
  How to fix this or get to download correctly, so I can reuse my Messenger? I uninstalled my Messenger when it stopped working (would not allow me to connect to all) for about a month or two.
  Thank you!!!

  Hello

  1. can you install other windows updates?

  I suggest you to follow the steps below and check if it helps.

  Method 1: Try to reset the Windows update components and check to see if the same problem happens: http://support.microsoft.com/kb/971058

  Method 2:

   Try to put your computer in a clean boot state, and then try to install Windows vista service pack 1 and 2 manually.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Method 3: Try to install Windows vista service pack 1 and 2 from the link below.

  Service pack 1: http://windows.microsoft.com/en-US/windows-vista/Learn-how-to-install-Windows-Vista-Service-Pack-1-SP1

  Service pack 2: http://windows.microsoft.com/en-US/windows-vista/Learn-how-to-install-Windows-Vista-Service-Pack-2-SP2

  You can also consult the following link for more information:

  Troubleshoot problems with installing updates.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Hope this information is useful.

• Cannot install Windows XP Service Pack 3 (KB936929) - HELP!

  I am running Windows XP Professional.  I had a few problems with this computer, and this is one that I rarely use.  Her husband used to surf with.  I came across a software today I tried to load on that gave me the message that it had installed SP3.  She was never installed on this machine.  Then I tried to install most of the afternoon and it will not be installed.  I can't follow the troubleshooting because the only way I can open popup windows as this one is in the browser firefox and not Internet Explorer and you cannot run process in firefox (duh).

  I read every tip I could find.  I have copied a few new dll on the computer file, made a clean boot, deleted all antivirus programs on the computer.  Can someone help me please?  It could very well be linked to the problem of he I n opening pop-up windows or Active X.

  Thanks in advance.

  Hello

  I suggest that you follow the method 3 and "Check also" from the link and check if the problem persists.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-Security/Windows-XP-Service-Pack-3-KB936929/f75916af-F52A-46BE-A65c-28eaffe2bc5e

  THIRD PARTY LINK WARNING

  WARNING: Microsoft does not provide any assurance or warranty, implied or otherwise, and is not responsible for the download, you receive from the sites of third parties or support related to the download or the downloaded technology. If you need assistance dealing with third party technology, please contact directly the manufacturer.

• Cannot install Windows 7 Ultimate because the disk is an upgrade can is not a product key

  Original title: I'm in a difficult situation, help!

  First of all, I bought a new computer and tried to set up Windows 7 Ultimate. I have been informed that it is an 'upgrade' and I'm stuck in the set up screen requiring a product key that I tried to use, without success.

  I was wondering if it's because it's just an upgrade and I need Windows 7 Home Premium?
  And when to buy the premium what will become of her already implemented Windows 7 Ultimate?

  Your help would be greatly appreciated.

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

• Cannot install Windows Vista Service Pack

  When I try to install the update for Windows vista Service Pack I get the 8024200f error, and the update fails.

  It's the wrong Forum for Windows updates or Service Pack questions.

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Cannot install Windows 7 ultimate on hardware RAID

  I have three 1 to HARD sata drive, in the card mother Gigabyte GA-Z77-DS3H. I did HDD1 as no raid and two others as mirror leads to the BIOS level using control RAID Utility. But when I try to install Windows 7, in the last step of the installation, I got a message saying that Windows cannot continue. Anyboday have suggestions.

  Disconnect the two additional disks, insert the cd of Win, if it finds all remove them all partitions, and then continue the installation (I assumed that the installation correctly identifies the size of the disk)

  PS You are aware of the limits of the raid provided by the controller of the motherboard?

  Mirror raid is not an alternative to a backup

  RAID, provided by the controller of the motherboard is not hardware raid, in the true sense. Hardware RAID is available from a dedicated third-party hardware card.

• Cannot install Windows 7 Ultimate Upgrade - error code: 0x80070005 on a Mac

  I'm having a frustrating morning, try to install Windows 7. I currently have Windows Vista Ultimate Edition and you have purchased the version upgrade of Windows 7 Ultimate. As soon as I try to run the installation file, I get the following error. ¨Windows could not create an installation folder. Error code: 0x80070005¨ I would be very grateful for advice on how to solve this problem.

  Thank you.

  Simon

  See if your Bootcamp is actually the version 3 (right click - on Bootcamp) I did a system restore because I had just updated those drivers. But if you did when you got your Snow Leopard, you need to uninstall Bootcamp 3.0 in programs and features.  If you remember, when you loaded Windows Vista first you did not load Bootcamp until after installation has been completed.

  So to remove 3.0, restart, then try to install again.  Let us know how it went.

• Update error: cannot install Windows XP Service Pack 3 (KB936929)

  Windows XP Service Pack 3 (KB936929)

  Hi Vcsy,

  You can try http://support.microsoft.com/kb/322389 .  It lists several methods on how to obtain the latest Service Packs.

  In addition, Microsoft offers support for Windows Update problems, and you can contact them by e-mail.  Click on the link below, select the edition of Windows XP, you have, then choose "Windows Updates", then "problems in the installation of updates:

  http://support.Microsoft.com/select/default.aspx?target=assistance&C1=509&

  I hope this helps. : P

  -Queen

• Cannot install Windows 7 Ultimate 32 bit

  I have a HP dc 7800 Office that took Vista.  The hard drive has been wiped clean of my IT Dept and sold to me.

  I have a disc for Windows 7 Ulitmate, 32-bit, but the machine will not recognize it or begin the installation.

  I put the BIOS on a CD as 1.

  I put the boot files on a USB key and the machine tries to book from these files, but says "not found, no operating system" even though I have the disc in the drive.

  Any help would be greatly appreciated.

  David in Detroit

  Download: Windows 10 10074 English: x86

  After graduating the .iso file, you use the Microsoft .iso to USB/DVD tool to create a bootable DVD or USB (requires a blank DVD or USB flash to at least 4 GB key).

  

  or RUFUS allows you to use your existing Windows 7 DVD to create a bootable copy.

  The USB key must be formatted in FAT32 and use the MBR partitioning scheme. To do this, you must use Rufus, a small tool that you can download for free.

  

  Rufus - credit: Pete bastard/Akeo

  After installing Rufus:

  • Launch it
  • Select the ISO Image
  • Point to the file ISO for Windows 10
  • Check create a disk bootable using
  • Select GPT partitioning to EUFI firmware as the Partition scheme
  • Choose FAT32 NOT NTFS as file system
  • Make sure that your USB in the device list
  • Click Start
  • Close when you are finished

  Begin the installation.

  The following describes the standard way to start the installation, especially if you are in dual boot a 64-bit version of Windows 10 alongside a 32-bit version of Windows. Another way is to start from a version of runing Windows installation and select the partition where you want to install Windows 10. See below for instructions how.

  For information about how to modify your BIOS options to boot from the DVD drive, see the following tutorial:

  http://notebooks.com/2011/05/05/How-to-load-BIOS-and-change-boot-configuration/

  

  Once your computer is configured to boot from the DVD, you should see this option.

  If you are installing from a USB key, see the instructions below how prepare your computer to boot from a:

  http://Windows.Microsoft.com/en-NZ/Windows7/start-your-computer-from-a-Windows-7-installation-disc-or-USB-flash-drive

  

  The windows logo will appear on the screen, it could be here for a while, as long as you see the defiler, everything should be ok.

  The configuration screen will finally appear, choose the time format and currency, then click on Next.

  Click Install now

  Wait while the installation program starts

  

  Accept the end-user license agreement, and then click Next

  

  Click Custom install Windows only (Advanced)

  

  Click next and wait while the preview moved.

• Cannot install Windows 7 "recovery media" on new Portege R600

  I got a new R600 that I wanted to buy with Windows 7 pre-installed, but the only option is to buy it with XP installed and "Windows 7 recovery media" (2 CDs) comes in the box, with no instructions. I started the computer and did nothing but the name and choose a pseudonym; This raised the office. Then I inserted the first CD 2: nothing. Power off and has already begun with this CD in the disc drive: nothing. Called Toshiba tech support (phone seemed to be answered in India) and has been commissioned to do several restarts now press F12 or C: nothing. After a long holding down the tech sought aid, promised a call from his supervisor: so far (it was yesterday) nothing.

  Can anyone suggest how I can fix this myself or get some action from Toshiba?

  Hello

  Please check if the BIOS Version is 3.0 or higher. If this isn't the case, please update the BIOS before installing Win7.

• Cannot install Windows Vista Service Pack 1 update

  I just bought Windows 7 because of all the problems I have with Vista. I did the update Advisor and he told me that I had to update my windows vista with service pack before I can upgrade to Windows 7. When I tried to install, it says update failed. The number, he gives me is KB936330. Can someone help me with this? Thank you. I had many problems in the past trying to install updates also.

  You post your question in the wrong Forum.

  Windows Update Forum:

  It's updated operating system Vista, upgraded installation and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner