cannot leave the homegroup (Windows 8)

Similar Questions

• My homegroup not working? It won't let me view or change the password. It also won't let me leave the homegroup

  Homegroup makes me crazy. So far the only Windows 7 PC in the House was my laptop, but we just got a new office and I if it would be possible to link to the top in a homegroup, I thought wrong. It's impossible! I created a homegroup on my laptop, it wont let me view or change the password. It also doesn't let me leave the homegroup. I read on some other messages that I should delete idstore.sst however after running a full search of the computer I found there is no file on my computer. Any ideas? Thank you!

  Hello

  Please follow the steps below to remove a computer from a group of House.

  1. open home group by clicking the Start button, click on the Panel, tapping home group in the search box, and then on home group.

  2. click on leave the group home.

  3. click on leave the group home, and then click Finish.

  For more information, see please leave a House Group.

  I suggest you follow the link to http://windows.microsoft.com/en-US/windows7/HomeGroup-frequently-asked-questions below home group

  I also suggest you to perform troubleshooting home group. http://Windows.Microsoft.com/en-us/Windows7/open-the-HomeGroup-Troubleshooter

• Cannot join the homegroup to the second computer in the network.

  I've recently updated my desktop pc and laptop with windows 7.  The office is a s 530 Dell Inspiron and the laptop is a Dell Inspiron 15.  The Office has managed to create a homegroup in windows 7, but I can't get the laptop to join.  I ran the wizard of troubleshooting many times without success.  Sharing files between computers is available, I can't just join the homegroup.  I have read several forums about ipv6, and although it shows that IPv6 is enabled, the status shows no network access.  I tried to leave the homegroup, stop and begin another without success as well.  Router is a Belkin N1 Vision 802.11n.  I can follow directions very well, but I'm not a genius with this stuff.  If there is something that I should be more specific, please let me know.  I'm going crazy here.

  OK, that was my answer.  I have connected the laptop in the server and was immediately allowed to join the homegroup.  Once the initial installation has been made, I can now access homegroup wireless on the network without any problems.  I don't know why I had to connect using ethernet to set up.  New bug in the OS, I guess.  Thanks for the help.

• cannot start microsoft office outlook. Cannot open the outlook window.

  I have Windows 7 and keep getting this message when trying to open my emial. "" annot start Microsoft Office Outlook. Cannot open the Outlook window.

  Hi chatimcc,

  Welcome to the HP forum.

  Open a command window. Type outlook.exe /resetnavpane and press the Enter key. Now try to open Outlook.

• Cannot start Microsoft Outlook. Cannot open the Outlook window.

  I tried running Outlook.exe / resetnavpane because I see it worked for a ton of people - but I got the error message "cannot start Microsoft Office Outlook.  The command line argument is not valid.  Check the switch you are using.

  This is almost always due to:

  1. you have an older version of Outlook that does not have command line switch.  What version of Outlook you have?
  2. you have not put a space between "Outlook.exe" and "/ resetnavpane.

  Cannot start Microsoft Office Outlook. Cannot open the Outlook window.

  For Microsoft Office Outlook 2007 command line switches
  HAL
  --
  HAL Hostetler, TCE
  Engineer senior/UPDATED--MS MVP-Print/Imaging - WA7BGX
  www.kvoa.com - KVOA television, Tucson, AZ.
  Live Hot Licks - www.badnewsbluesband.com

• I can't open microsoft office outlook. It says cannot open the outlook window. I tried to run "outlook.exe/resetnavpane, but it shows and error msg 'make sure you typed the name correctly and then try again.

  I can't open microsoft office outlook. It says cannot open the outlook window. I tried to run "outlook.exe/resetnavpane, but it shows and error msg 'make sure you typed the name correctly and then try again.

  I can't open microsoft office outlook. It says cannot open the outlook window. I tried to run "outlook.exe/resetnavpane, but it shows and error msg 'make sure you typed the name correctly and then try again.

  There is a SPACE between 'exe' and ' / '. You didn't have that. That's why.

  Please copy and paste it in the search box ot Run box... outlook.exe /resetnavpane

  t-4-2

• Microsoft office outlook error: "cannot open the outlook window.

  Outlook office 7 will not open this am.  It worked yesterday.  The message is simply that it "cannot open the outlook window.

  Try;

  Start > run... outlook.exe /resetnavpane (NB the space between exe /)

• How can I associate an image without leaving the existing window in adobe acrobat?

  Hello world

  I'm new to using adobe acrobat, but I saw (once) that in a manual, they have linked an image.

  Just by hovering the mouse on the linked Word, the image appears "over" to the pdf, without leaving the existing window

  Is it still possible? and how?

  Thanks for your help

  Yes, it is, by placing a button with the image and creating another button

  that show/hide the premiera when the mouse input/output there.

  Do you need to do once or in several places?

• Cannot join or leave the homegroup

  I tried to create a homegroup, so that I can use my laptop in another room via an ethernet cable. I wrote the first password, but when I went to 'continue', he said that it was false. I could not leave or join the network. Now I can't access my printer from my PC or laptop. I tried several times the system recovery, but that did not work. I got a new password of grouphome, but it does not, either. Each time I try to leave the grouphome, he says I have to join first, but does not accept the new password, so that I can't reach. If I am not a member, I can't leave. I can't remove the grouphome, either.

  How can I access my printer again? BTW, I use a mouse, not some

  "creep" of something, I don't know what.

  Hello

  Thanks for posting your query on the Microsoft Community.

  According to the description, I understand that you are unable to join the home group.

  I would first refer to the article below and check if that helps.

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-i-access-my-HomeGroup

  For more information, see the following link:

  Change home group settings

  http://Windows.Microsoft.com/en-us/Windows7/change-HomeGroup-settings

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• Cannot open the initial window of Firefox. (windows7 update)

  When I run Firefox, the hourglass shows seconds, then disappears.
  No window is open. This occurs after an automated update to my
  Windows overnight Tuesday, dec 9. Internet Explorer is obviously OK.
  All other programs OK.

  Have tried - without change:

   restart computer;
   reinitialize modem and wifi home set;
   install new firefox (using "stub" 35.0.5);
   hold shift key down during launch;
   Windows "troubleshoot compatibility" reports "An error occurred while
     troubleshooting".
  

  After any attempt to start the Task Manager shows there is at least one
  Firefox.exe * 32 process (tab), but no related Application (tab).
  Dialog box 'automatically add' could not open this file...

  Please use malwarebytes as well - in my experiences, it gives the best results (just leave the ability to run a try for the unchecked pro version)...

• When you try to run the defragmentation, getting the error "mmc cannot ope the c:\windows\system32\dfrg.mmc file.

  I really need to defragment, but I get this error msg.   MMC cannot open the file c:\windows\system32\dfrg.msc

  
  
  I've had this problem for awhile now and simply ignored. I have no need to defragment is an important channel now. Help, please?
  Thank you;
  Gail

  Hi hhgail,

  See the article following some possible troubleshooting:

  http://support.Microsoft.com/kb/914231

  I hope this helps!

• Error message: Windows cannot find the C:\windows\system32\drivers\prdmgr.exe file to start Windows XP.

  Original title: can't end file message system 32 drivers prdmgr.exe.

  Under windows XP when I boot, I get a message: windows cannot find the file: c:\windows\system32\drivers\prdmgr.exe and I already made a ststem restore and still get this message.

  Turn off System Restore. Use ccleaner and then go to tools/startup. Select it and click on delete. Are you sure its not the windows folder drivers? If its in the windows folder, is a worm/trojan. Looks like it belongs to the trojan.agent so sound in the drivers folder

  Use ccleaner, and then click run cleaner. First close the browsers

• nitro loading a pdf editor and this error comes we - error cannot install the single window service

  someone sees this error I'm not able to load my nitro now and it has always worked.  error saying error-could not install the stop service my other programs such as microsoft office.

  Hi Sandra,.

  Thanks for posting in the Microsoft community

  I understand how it could be frustrating when things do not work as expected. Please, I beg you, don't worry I'll try my best to resolve the issue.

  I suggest you try the steps from the following link:

  Q10271 - PRB: error: cannot install the Windows Service
  http://KB.nitropdf.com/article.aspx?ID=10271

  Hope this information is helpful and let us know if you need more assistance. We will be happy to help.

• Cannot perform the update Windows with the error code A 8024, 000

  Original title: error code 8024A 000, does that mean?

  I had to do a clean reintall WIndows Vista and when I tried to update, I received error code 8024A 000, does that mean? How can I fix it?

  Hi Anthony,

  1 are you facing this problem with any particular Windows update?

  2. What are the troubleshooting steps you have tried?

  Please follow the links and check with the question:

  Method 1:

  How to reset the Windows Update components? :

  http://support.Microsoft.com/kb/971058

  Warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

   

   

  Method 2:

   

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2:

  http://support.Microsoft.com/kb/2509997

  Warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up the registry, click on the number below to view the article in the Microsoft Knowledge Base:

   

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost

   

  I hope this helps.

• Cannot create the C:\WINDOWS\system32\drivers\drive.sys file

  Cannot create the file 'C:\WINDOWS\system32\drivers\drive.sys '. The process cannot access the file because it is being used by another process.

  I get this error message all the time on my desk. No matter what I do, internet research, watch videos, listen to music, work offline, it does not apply to just be online. I really want to know how to solve this problem, I searched everywhere I could, and I can't find again no anwer. Please reply and if you want more information, then I'll be happy to provide.
  Thanks for your time.

  Hello

  I suggest you to follow these steps and check if that helps:

  Method 1:
  Start the computer in safe mode and check if the same problem occurs:
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 2:
  Try to perform the clean boot and check if it helps:
  http://support.Microsoft.com/kb/929135

  NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the above article.

  It will be useful.