Cannot lock the tag; causes of error and crashed!

Similar Questions

• Error code 70879003: cannot lock the memory segment.

  Hi guys,.

  I am trying to build a program runs on a windows CE of touch screen system and tested the majority of individual components to see that they work on the system and they have all been successful, however when I build and try to run the entire program, I am presented with a popup box saying:

  App failed. Error code 70897003. Cannot lock the memory segment.

  The program then stops completely. I tried to search the web and the forums, but this specific error code is not mentioned anywhere, and the information that I have known impossible to segment errors memory locking has not been very useful and how to solve this problem.

  Any suggestion or help would be very appreciated.

  OK, so I solved the problem myself, it turns out that's not at all a problem of backend, in my front panel I accidentally overlapped 2 resulting in a being placed inside the other tab controls. Move them so they are not stacked and the problem is solved.

  So moral of the story if someone gets this error in the future, check your tab controls are not overlapping / stacked.

• Error message at startup: "cssauth.exe instance cannot start due to an initialization error" and also unable to open help and the file

  Original title: cssauth.exe instance cannot start, help and Support of file disable

  Whenever I connect to my windows XP, it still says cssauth.exe instance cannot start due to an initialization error and I could not open my file help and suppot. Please help me. Thank you before

  Hello

  1 how long have you been faced with this problem?
  2. don't you make changes on the computer before this problem?
  3. What is the brand and model of the computer?
  4. who help and support files are you referring to?
  5. what exactly happens when you try to open it? You get the error message?

  cssauth.exe is related to the Client Security Solution.

  Step 1: Try disabling startup cssauth.exe in the configuration of the system.

  Here's how:

  1. click on start > run.
  2. type msconfig and press ENTER.
  3. click on the Startup tab.
  4 locate cssauth.exe, and clear the check box for this.
  5 restart the computer and check for the issue.

  Step 2: If you still get the same error at startup then perform the clean boot on the computer.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. click on start and then click Run.
  2. type msconfig and click OK.

  The System Configuration Utility dialog box appears.

  3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
  4. When prompted, click on restart to restart the computer.

  I would also ask you to contact the manufacturer of the computer because the problem is with the client security software that is provided by them.

• While applying Opatch we got a cannot lock the Central inventory

  Hello
  
  
  
  I just installed new software Opatch, when I'm checking the last list applied patch, I get the error message
  
  
  
  < p >
  lsinventory opatch
  
  Citing O Patch 10.2 .0.4.4
  < /p >
  < p >
  Setup Oracle interim Patch version 10.2.0.4.4
  
  Copyright (c) 2007, Oracle Corporation. All rights reserved.
  < /p >
  < p >
  
  
  Oracle homepage: / xxxx/app/oracle/product/xxxxxxx
  
  Inventory Center: / dev/null
  
  from: /var/opt/oracle/oraInst.loc
  
  OPatch version: 10.2.0.4.4
  
  YES version: 10.2.0.3.0
  
  YES location: / xxx/app/oracle/product/xxxxx/Yes
  
  Location of the log file: /xxxx/app/oracle/product/xxxxx/cfgtoollogs/opatch/opatch2008-10-29_10-38-52AM.log
  < /p >
  < p >
  Cannot lock the Central inventory. OPatch will attempt to lock again.
  
  Do you want? y
  
  There
  
  The user responded with: Y
  
  OPatch will sleep for a few seconds, before re - try to get the lock...
  < /p >
  < p >
  Cannot lock the Central inventory. OPatch will attempt to lock again.
  
  Do you want? y
  
  n
  
  The user responded with: N
  
  Cannot lock the Central inventory. Stop trying by the request of the user?
  
  LsInventorySession failed: cannot lock the Central inventory. Stop trying by the request of the user?
  < /p >
  < p >
  OPatch failed with the error code 73
  
  Rocky: UPG11: / xxxx/app/oracle/product/xxxxxx/OPatch - & gt; /var/opt/Oracle/oraInst.loc more
  
  inventory_loc = / dev/null
  
  
  
  can you get it one please let me know the cause of this.
  < /p >
  
  Published by: appsguyflorence on October 29, 2008 21:17

  Please refer to the Note: 73123.1 - Universal Installer / tools OPatch are suspended and / or fail to install
  https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=73123.1

• Cannot lock the focus

  Hello

  I'm developing an application that uses the camera on a Torch 9810 using SDK 7.1.  I'm trying to use the

  EnhancedFocusControl set and lock the focus.  My code is below:

  public CameraImageCapture()
      {
          try
          {
              _camera = javax.microedition.media.Manager.createPlayer("capture://video?encoding=jpeg&width=1024&height=768");
              _camera.realize();
              _cameracontrol = (VideoControl) _camera.getControl("VideoControl");
              if (_cameracontrol != null)
              {
                  Field videoField = (Field) _cameracontrol.initDisplayMode(VideoControl.USE_GUI_PRIMITIVE, "net.rim.device.api.ui.Field");
                  _cameracontrol.setDisplayFullScreen(true);
                  _cameracontrol.setVisible(true);
                  _camera.start();
                  _efc = (EnhancedFocusControl) _camera.getControl("net.rim.device.api.amms.control.camera.EnhancedFocusControl");
                  if (_efc != null)
                  {
                      if (_efc.isFocusModeSupported(EnhancedFocusControl.FOCUS_MODE_CONTINUOUS)) {
                          _efc.setFocusMode(EnhancedFocusControl.FOCUS_MODE_CONTINUOUS);
                      }
                      try
                      {
                      _efc.startAutoFocus();
                      }
                      catch (Exception e1)
                      {
                          Dialog.alert(e1.toString());
                      }
                  }
                  if(videoField != null)
                  {
                      add(videoField);
                  }
              }
          }
          catch(Exception e)
          {
              Dialog.alert(e.toString());
          }
      }
  

  When I try to call EnhancedFocusControl.startAutoFocus I get the following error:

  javax.microedition.media.MediaException: cannot lock the focus.   I noticed a few others have had this problem using the example program, but received no response.  Is there a solution for this problem?

  I found that if I moved the EnhancedFocus control in the invokeAction function, she was able to set the focus.

• cannot sync the ipad. An error has occurred...

  Hello World!

  Whenever I start my PC, I get this message "cannot sync the ipad. An error occurred... "or similar as I have translated it to French somethng.

  What can I do?

  Both iTunes and iOS are uptodate.

  Thanks for any tips, hints, suggestions, and other

  Without knowing the exact wording of the error message there is really noting we can do except say restore the iPod via iTunes

• Unable to save the family settings, error: the system cannot find the specified file 80070002 error code.

  Original title: Family Safety filter configuration problem.

  Hello.

  I got family safety works very well before a reinstall of Windows 7 Professional.  After I install windows essentials, I connect to my microsoft account, now I'm trying to set up the filter, monitored accounts are already checked, the only option is to save.

  When I click Save I get this

  The system cannot find the specified file 80070002 error code.

  I've tried everything.  Uninstall, reinstall Windows Essentials 2012.  First of all, I did a partial install with just the film and the family.  Uninstalled.  Re-installed full.  Always the same question.  I even tried to install Windows Essentials 2011.  No change.

  Help, please.  I appreciate it.

  Thank you

  GISIGER

  Hi Greg,.

  Thanks for the reply.

  Run the System File Checker tool.

  Use the System File Checker tool to repair missing or corrupted system files

  http://support.Microsoft.com/kb/929833

  Also reset Windows update components and check if this solves the problem.

  Refer to this link:

  http://support.Microsoft.com/kb/971058

   

  Important: Follow the steps in this section carefully. Serious problems can occur if you modify the registry incorrectly. Before you modify it, Save the registry restore problems.

  Keep us informed on the status of the issue.

• Cannot lock the file.

  Hola, UN curioso caso a worm what tal:

  -A host ESX (4.1 U1) ha perdido discos in cabina (to han roto!) ) y una VM is ha been catatonica.

  -El ESX is ha gradient y al final be ha tenid o apagar el porque ESX VM without is podia thank ordenadamente.

  -El ESX ahora fuera del cluster, works muy lento. Solo goes well if the quitamos las las HBA percentage.

  -The VM catatonica no you can arrancarse in another ESX debido a message that says the following:

  An error was received from the ESX host turning on VM PEPITO.

  Reason: Cannot lock the file.

  Cannot open disk ' / vmfs/volumes/4f4f6437-aa67cc54-19c5-e41f131ff1fa/PEPITO/PEPITO.vmdk' or one of the snapshot disks it depends on.

  Tampoco is Registrar can con el host auto problemas con y sin percentage, how identify el fichero blocked?

  An importance reto.

  Gracias!

  Gracias. Finalmente seems that no habia any fichero blocked (tras verificacion practica mediante el Detección of caudal VMware KB). The problem is fixed the siguiente manera:

  -Desregistrando the VM

  -Creando una nueva identicas benefits VM.

  -Los Asignando discos esta nueva VM.

  Saludos!

• Cannot download the 6.2 Palm Desktop and HotSync Manager (Windows)

  Cannot download the 6.2 Palm Desktop and HotSync Manager (Windows) for Tungsten E2.

  I get the error message: "unable to 1607 to installInstallShield Scripting runtime.

  Is there a solution?

  Thank you.

  Found this on the Palm.com support plate:

  http://KB.Palm.com/wps/portal/KB/common/article/20727_en.html

  WyreNut

• What opening of database Service of Cloud Computing console receiveing "the user role cannot access the Cloud database Service" message and see no service. Why?

  What opening of database Service of Cloud Computing console receiveing "the user role cannot access the Cloud database Service" message and see no service. Why?

  Thank you in advance.

  Try now

• Cannot access the server message coming up and cannot convert files

  Cannot access the server message coming up and can't convert the files. Works on my desktop, but not at home.

  ER

  Is it ExportPDF?

• Error and crashed when rendering

  Whenever I try to make a video with a specific project, I get an error and crashes and then to After Effects. The number of "last login message" changes every time, but the error < BEEp_InitSoundPB > < 0 > remains the same. I get the error message in seemingly random places during rendering (I tried made with different parameters) and is followed by a another message that says I have crashed and I can save my file.

  

  

  • I use After Effects CS6 11.0.2.12 on a Win7 x 64 SP1.
  • The source of the layer footage are pictures and generated by the solid AE only.
  • I've never encountered this error, I searched and found nothing useful, and he came for what seems like no reason - I was not something out of the ordinary when first rendering failed.
  • I have Quicktime 7.7.3
  • The only plugins I have are defined VideoCopilot jerk and makes with and without him still fails.
  • My computer has an AMD Athlon (TM) II X 4 635 processor (4 CPUs), ~2.9GHz with 6 GB of RAM and an ATI Radeon HD 5450 video card.
  • The problem occurs only in the final; There is no problem with RAM Preview.
  • I don't think I'm using features OpenGL or made multiple images at the same time as multiprocessing.

  Thanks for the help!

  Replace the MP3 with a WAV file and rinse the MediaCache in the prefs, then try again. Seems you've introduced adio compliant flakey (CFA) of the files in the cache due to the use of a not so perfect MP3...

  Mylenium

• 2 errors cannot start the file missing PSHED.dll and a blue screen error 0x0000C1F5

  Hello

  A few moments ago I had to do a restore of the system for some reason forgotten but restoring interrupted when the power off when I tried to restart it gave me a chioce of such boot options that start normally start SafeMode etc... but when I choose one of them it is said that the PSHED.dll file is missing or currput so I put in my drive repair/install and reboot, but after the white bar has loaded and the green bar loads, it gives me a blue screen error with the info tech being 0x0000C1F5 and the rest are zero

  I have a gateway with windows Home premium 32-bit model and more recent material I instaled a grapics card xfx 9800gt nvidia and a new mouse, any help would be appreciated thanks

  -Renton

  Hello

  This error is somehow a special case:

  Stop error message when you start a Windows Vista-based computer: "0x0000C1F5".
  http://support.Microsoft.com/kb/946084

  How to get around the Stop error 0x0000C1F5 on a Windows Vista-based computer
  http://support.Microsoft.com/kb/970101/en-us

  Stop error when you start a Windows Vista-based computer, even though hotfix 946084 is installed on
  computer: "0x0000C1F5".
  http://support.Microsoft.com/kb/958069/en-us

  Other methods:

  Workaround for STOP 0x0000C1F5 / 0xC1F5 / C1F5 / BSOD / CLFS. SYS / KB946084
  http://www.delmartian.com/nullpointers/workaround-for-stop-0x0000C1F5-0xC1F5-C1F5-BSOD-CLFS.sys-KB946084.html

  Easier to read same message
  http://BSODs.com/content/Windows-Vista-and-stop-0x0000C1F5-Linux-anyone

  SystemRescueCd
  http://SysRescCd.org/Main_Page

  Video fix
  http://www.YouTube.com/watch?v=Y_OjCkbZyTw

  Video Fix - Linux
  http://www.YouTube.com/watch?v=SwSvIhyZRVc

  ================================================

  For the most part, the BlueScreens (the above is a special case as noted)

  Check this thread for more information on using BlueScreenView, MyEventViewer and other methods of
  Troubleshoot the BlueScreens - top 3 answers.

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• In XP, cannot change the way users log on and outside, getting the error "a recently installed program has disabled the Welcome screen and the user fast switching.

  The switch on my fast computer of user function has been disabled on my computer. When I try to use this function. I get the following message.

  A recently installed program has disabled the Welcome screen and the fast user switching. To restore these features, you must uninstall the program

  . The following file can help you identify the program that made the change. GT Gina.dll

  * original title - I have a windows xp. Under user accounts, choose a task. Under change the way users log on and outside.  I get a message that the function of the Welcome screen has been blocked *.

  Hello

  You can try the steps outlined in the article below and check out them.

  The logon screen "Welcome to Windows" does not appear when you start the computer
  http://support.Microsoft.com/kb/817142

• Cannot lock the entity

  Hi all
  
  I'm having a problem with the locking of the data.
  
  (a) received error message: "cannot complete this action because calculations, translations or collections should be made."
  
  (b) I was able to lock the entity in the previous years except for January 2011.
  
  (c) I consolidated with application data and calculation forced on the entity, but that did not help.
  
  
  Someone else ran into similar issues?
  
  Thank you
  T.T.

  We encounter this problem from time to time. I don't know what causes it, but to solve that go set to the [None] dimension and for some reason, we find several parent entities that remain have a status of CN. The only way we can get to lock is to do a force on each of these individual parent and the lock then calculate them while we work our way upwards. Not sure if this is your problem but I'd maybe start looking at the different levels of the dimension of value. If anyone has any suggestions on a better way to solve this problem, we would be happy to try them!
  Thank you.