Cannot map the subfolders to Synolgy NAS

Similar Questions

• Cannot map the shared folders to the drive letter in WIndows prompt

  I seem to have a problem with the shared folders in a Windows on Fusion 6 client. Turning on shared folders in the VM options creates the "VMWare shared folders" shortcut on my desktop, and I can open and view files shared host, as expected. However, it is not map the shared folders to drive Z: in Windows because I expect, and I can not also go to shared folders using the path "\\vmware-host\Shared records" (for example, only by typing in the address bar in a window of the Explorer). It is a problem, because I need a path that I can put scripts to refer to things in the shared folder.

  Also, if I access network in Explorer, vmware-host is there but trying to open it gives me the error "Windows cannot access \\vmware-host."

  I'm running 6 Fusion on OS X Mavericks, and the guest is Windows 8.1. My .vmx file contains the following lines which I think are related to shared folders:

  insulation. Tools.hgfs.Disable = "FALSE".

  hgfs.mapRootShare = 'TRUE '.

  hgfs.linkRootShare = 'TRUE '.

  sharedFolder0.present = 'TRUE '.

  sharedFolder0.enabled = 'TRUE '.

  sharedFolder0.readAccess = 'TRUE '.

  sharedFolder0.writeAccess = 'TRUE '.

  sharedFolder0.hostPath = ' / users/buck/projects.

  sharedFolder0.guestName = 'projects '.

  sharedFolder0.expiration = "never".

  sharedFolder.maxNum = '1 '.

  For me, the weirdest thing is that I can get for shared folders by using the shortcut on the desktop, but by typing the exact path and the shortcut points to in an Explorer window does not work!

  If anyone has any suggestions on how I could get this works normally, I would be very grateful - thank you!

  Hi Buck,

  Welcome to the community.

  Have you tried to re - install vmware tools in your windows 8.1?

  ARBuck wrote:

  Also, if I access network in Explorer, vmware-host is there but trying to open it gives me the error "Windows cannot access \\vmware-host."

  I think you should activate windows network discovery if you want to browse vmware host in the network.

  You can enable this by

  Control Panel-> network and Internet-> Network and Sharing Center-> the advanced sharing settings

• Windows 7 cannot map the drive to the DNS 323 NAS device.

  OK, I'll just about my mind with this one. I have a DNS 323 NAS device connected directly to my laptop with the static IP and a crossover cable (removed from my network for troubleshooting of simplicity). I'm running Windows 7 Pro. I can access the web interface of the device, ping and Windows 7, he sees in screen sharing network (taked me on the web of the interface when I click it). I tried to map a drive using the drive mapping by using the server name and Ip and I get the same result. It just says that it cannot connect. I removed all fireewall and virus programs. I have reset the NAS to factory default and the latest firmware.  I tried the safe mode with network and nothing. However, I can run XP mode and that works very well for the drive mapping.

  When I plug this NAS using the method above to another box under XP pro, and an another runnning Windows 7 Pro, they can map drives without problem.  So I think I reduced it to something with my Windows 7. It worked when I first installed 7, but I havn't found this NAS in awhile, so not sure when it stopped.

  Can someone help, it drives me crazy!

  I can't take credit for this answer - I saw it in another forum: uninstall Windows Live Login Assistant... it worked for me! I was unable to map drives to Win7, so that I could do this well with XP.

  I have no idea why it works.

• Cannot view the subfolders in photo library when you try to attach photo to email.

  I use Windows 7 Professional.  When I create a Yahoo or Gmail email and you want to attach a photo, I click on 'attach file,' go to the folder of pictures in my library, but today, no pictures don't show - but they are there, I can't see the folders.  I have subfolders by year, which is what I want to see.  The last time I tried this, probably a few weeks ago, he had no problem, all the records showed, as usual.  I can search in the page/bar, "search for my pictures" and type a name or date and everything will show, but I really just want the files because I know exactly where everything is.  How can I get this to see my folders back?

  I tried everything suggested and nothing has worked.

  I continued to look for my question and tonight finally found the easy solution to this forum.

  http://answers.Microsoft.com/en-us/IE/Forum/IE10-Windows_7/cant-access-most-photo-files-browsing-with-IE10/832ea066-4D95-4c64-A9D5-1e274e562ec1?page=2

  Click the Start button and click on your username at the top.

  Massive rearmament of the hidden attributes can be done by right clicking the (my pictures...) the list and select Properties.

  Section of the tab general, check hidden near the bottom and click on apply.

  This will change all files to hidden, click Yes,.

  Then uncheck the hidden box and apply,.

  It will remove the attribute hidden all your files, click Yes,

  Then finally click on apply then OK.

• Outlook 2007 on Vista cannot retrieve the subfolders of Inbox

  I did the stuff of the Inbox repair and I don't always have the subolders that I created in my Inbox.  Help!

  Hello

  Please check with the experts of the Office and Outlook here: (re - ask your question in these groups)

  Responses - Outlook
  http://answers.Microsoft.com/en-us/Office/ee861097.aspx

  Answers - Office
  http://answers.Microsoft.com/en-us/Office/default.aspx

  Or

  Discussions of Questions General Outlook
  http://www.Microsoft.com/Office/Community/en-us/default.mspx?DG=Microsoft.public.Outlook.General&lang=en&CR=us

  MS Office discussion groups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx
  And here:

  Microsoft.public.Outlook discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Outlook&cat=en_us_81f401b3-b3fe-4e8d-B291-066f30b63ec8&lang=en&CR=us

  Office newsgroups
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.Setup&cat=en_us_642d5640-c1ba-43C3-A224-b3ec1473346c&lang=en&CR=us

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Cannot select the drive (NAS) on Windows Media Center

  Original title: cannot select the drive (NAS)

  My HTPC uses a small SSD 30gig as an OS drive, with all the media stored on a 2 TB WD MyBook Live all connected via gigabit ethernet.  The NAS is mapped by Win7 Premium as Z: and is visible for Win 7 and all other programs, including iTunes and XBMC.  In Media Center settings-> TV-> check the possibility of the recorder are grayed out (+/-buttons) and the drive C: of SSD is the only option.  What can I do to get the WMC to see the SIN?  Is there another setting of mapping I should use?

  Also, as a side note, there is no option to change the quality of the recording at all.  Installer below.  If any other information is needed, let me know.

  ASRock m - itx E-350 APU/MB
  Kingston SSD now V series SSD 30gig
  Western Digital My Book Live 2 TB
  Cisco/Linksys E2000 Wireless N Router
  PCTV usb TV Tuner (HD capable) with on the HDTV antenna
  Win7 Premium

  Record TV directly to a network location is not supported.

  You can submit your comments here: http://mymfe.microsoft.com/Windows7/Feedback.aspx?formID=195

• Cannot access the mapped drive frrom command prompt

  I have two network drives mapped on my Windows 7 Professional machine.  A disc goes to anothetr computer on my network and the other goes to a share through a VPN

  I can see the two and do actions from the Explorer (they still call it that?)

  but when I try to access it from a command prompt or the drive letter, I can use it system cannot find the drive specified... huh?

  Reset you the Protocol TCP/IP - Fixit

  http://support.Microsoft.com/kb/299357

  Command prompt window opened with elevated privileges and type

  IPCONFIG/flushdns

  Press enter

  Reset the default Host file

  FixIt - How can I reset the default Hosts file?

  http://support.Microsoft.com/kb/972034

• Windows cannot create the network map. Responses of the other devices on the network are delayed or on the network, there is a router incapatible

  Original title: no network card
  I installed a NETGEAR N300 Wireless USB Adapter on my computer which is a desk top Dell 64-bit running Windows 7 Edition Home Premium. There are five computers on my network. Two of the others use the same model of NETGEAR wireless USB adapt. I removed the Ethernet cable after the installation of the wireless adapter. I can say that the new wireless adapter works fine. When I tried to map the network I got the same message that appears in some of these problems: "Windows cannot create the network map. Responses of the other devices on the network are delayed or there is a router on the network incapatible". I have restarted this computer in SafeMode as suggested in the above problems. I tried other things like disabling the wired connection has always existed for the cable. No effect. Then I tried mapping the network on the other computers. All failed with the same message. All the other four computers are 32-bit. Three of these computers are also running Windows 7 Home Premium. They are the best desktop computers. The other computer is a Windows 7 Starter netbook running. It is the 32-bit computer, always using a cable. That will be replaced with the same wireless adapter model NETGEAR. Anyone know how to fix this or is this a bug? It would be nice of the network software of Windows 7 has worked as it is supposed to. TO.

  I went the last wired wireless computer and the problem disappeared. The five computers can view the map now without any problems.

• I use LRM6 with Win7.  Cannot display all of the subfolders on external drive with photos.  Can't see most recent used folders.  How can I get all the records to display in the tree when the library module?

  I use LRM6 with Win7.  Cannot display all of the subfolders on external drive with photos.  Can't see most recent used folders.  How can I get all the records to display in the tree when the library module?

  Syrup72 wrote:

  Why I see pictures when I click on the tab all the photos above, which do not show in the tree on the G: drive?

  DSC_2429 is in the shown locaton and present in all the Photos, but there is no folder "Tulsa"... "in the tree.

  The left pane is a "choose one". "All photos" are just that. 'G' is a different option.

  Lightroom is not a file Explorer. He knows only the drives and files that you have imported the photos of. If LR shows not all of the photos that are on your hard drive, it is because you did not import all photos.

  If LR shows you a photo in "all photos" but do not show it in the folder you think he is in, go to "all photos", select the image, right click "view in the library folder. This will show you where LR think the picture is.

• Every time I try to open a pdf document that is located on a server of our company (so not on my laptop), the drive still shows error. Cannot open the document. Only in EAC I copy the document to my local PC, I can read without problem. Server is mapped

  Every time I try to open a pdf document that is located on a server or in our company (so not on my laptop), reador always shows error. Cannot open the document. Just in case I have copy the document into my local PV, I can read without problem. Server is mapped in my FileExplorer (Win7). So boring and big bug I think.

  Massage of error: "there was an error opening this document. The network path was not found.

  Hi tobiask53385798,

  Could you please try to disable Protected Mode under ' Edit > preferences > (protection) "and see if that helps.

  Let me know.

  Kind regards

  Ana Maria

• Cannot open the filter saved in AE as a file filter DM says PP. displacement map is missing.

  Cannot open the filter saved in AE as a file filter DM says PP. displacement map is missing. Also get a message that the AE file format does not match the sequence. Ask me to retain the existing settings or sequence - or track work. Haven't tried dynamic link as well - no chance. I'm a noob, so might be something real simple.

  Thank you

  Other features such as text, or shape layer, that do not exist in PrPro, or effects can be translated when you export your AE project as PrPro project. Similar things happen when you replace a clip (or a group of clips) by PrPro chronology by dynamically linked composition AE: titles, quite a few effects and transitions are not translated (at least correctly).

  However, dynamically linked composition AE is considered a composite PrPro. Therefore, there should be no problem seeing the result of applying any effect within a dynamically linked composition in the chronology of PrPro. If you have some difficulties with it, please provide a detailed explanation of what you want to achieve and what you are doing exactly.

• Cannot map a: disk because it is not on the list, as it is said it is a Local disk, which is not there (T430s, Windows 7)

  At my work, I got a T430 running on Windows XP, which the a: drive was mapped to a network drive. I got a new computer yesterday, a T430s, running Windows 7. When I tried to map, the letter R has been absent from the list of drives. Back to Explorer, it says r: drive is a "Local Disk", but when I look at the properties, it is not much. When I try to access it, it is in accessible. Would be grateful for the help because I really want to map the network drive to r:

  Hello Samir,

  Thanks for posting your question on the forum of the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  All computers are connected to a domain network?

  Thank you for details on the issue.

  I suggest you try using the steps described in this article and check if it helps.
  Reference:
  Quickly to map a network drive in Windows Vista and Windows Server 2008
  http://TechNet.Microsoft.com/en-us/magazine/dd637758.aspx
  (Also applies to Windows 7)

  See also:
  Create a shortcut to (map) a network drive
  http://Windows.Microsoft.com/en-us/Windows/create-shortcut-map-network-drive#1TC=Windows-7

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Cannot map HR styles in Conversion settings after the .isf file loading

  Hello

  I'm trying to create AIR applications help on TCS 3.5, FrameMaker ver.10 books.

  When I load the project .isf file since I can't map the parameters of conversion to FrameMaker documents

  (I can open the dialogue box "Parameters of Conversion", but is unable to "map" the HR styles: neither "expand" buttons appear on the column settings FrameMaker).

  So, when I update book FM, all styles are not mapped.

  If you have faced similar problems and find a solution (or workaround), please kindly let me know.

  Thanks a lot for your help in advance!

  Hi Jeff,

  Thank you very much for your suggestion. I tried and found that it has not changed...

  Instead, I found a workaround (by chance);

  1 load the .isf file on file > project - Import tab setting.

  2. Select "Apply a FrameMaker template prior to importation", click Browse and choose model FM for the book.

  3. then click on the button change in conversion to FrameMaker "Edit" documents settings

  With this process, we can change the mapping of FM styles and those of HR.

  I don't know why, and I think that this feature is not intended for this purpose, but somehow the link FM - RH is restored.

  * If your project is multilingual, in particular, it contains multibyte characters, just make sure that your paragraph for graphic caption style is correctly set

  (language and police); or Adobe Distiller converts bad to do all the jumbled legends.

  I hope this workaround solution helps!

• Cannot open the application "Mail" because PowerPC applications are no longer supported

  I work on a MacBook Pro mid 2012

  Intel Core i5 2.5 GHz

  OS X El Capitan 10.11.6

  The Mail app suddenly quit and when I tried to resume, I got this message

  "Cannot open the application"Mail"because the PowerPC applications are no longer supported."

  This also happens with the "Maps" app

  All Mac software are up to date, but "Mail" has been working fine since my last update that was awhile ago.

  I am confused to say the least. Suggestions? Thank you!

  If you do a Get Info (command - I) on Mail and Maps applications, what version numbers do you see?

  Try a reboot.

  Make a backup using Time Machine or a cloning program, to ensure that data files can be recovered. Two backups are better than one.

  Try to set up another admin user account to see if the same problem persists. If back to my Mac is enabled in system preferences, the guest account will not work. The intention is to see if it is specific to an account or a system wide problem. This account can be deleted later.

  Isolate a problem by using a different user account

  If the problem is still there, try to start safe mode using your usual account.  Disconnect all devices except those necessary for the test. Shut down the computer and then put it up after a 10 second wait. Immediately after hearing the startup chime, hold down the SHIFT key and continue to hold it until the gray Apple icon and a progress bar appear. Startup is considerably slower than normal. This will reset some caches, forces a check for directory and disables all start-up and connection, among other things. When you restart normally, the initial restart may be slower than normal. If the system is operating normally, there may be 3rd party applications that pose a problem. Try to delete/disable the third-party applications after a reboot using the UN-Installer. For each disable/remove, you need to restart if you do them all at once.

  Safe mode - on El Capitan

  Start Mode without failure-El Capitan.

• Satellite A110-178 cannot run the Da Vini Code game

  My satellite A110-178 cannot launch the game "The Da Vini Code". following error occurs:

  Encountered exception! You want more information (will take several seconds to determine)?

  When I choose 'Yes', the following lines appear:

  (Slayer) Address of exception

  [no info game crash]

  IMAGE HELP STACK:
  TArchive::operator = + A9D22

  MAP FILE STALKWALK:

  All I can do is press 'OK '.
  the program stops, and that's the end of it.
  I don't know what that means, is there a problem with my hard - or software?

  If anyone can help me and translate the language of code of my computers, I'll be gratefull for this,
  because this is not a cheap game,

  Thanks in advance,

  Davina

  Post edited by: Davina Deleye

  I recommend you to check some forums on this game. I found one under http://www.isohunt.com/forum/viewtopic.php?p=126110

  Maybe you can find answer here. Read it carefully.