Tecra S1 Bluetooth

Similar Questions

• Tecra M3 - Bluetooth Stack versus Bluetooth Monitor?

  Previously, had a Tecra 9000 and never got bluetooth works smoothly and seem to have the same problem with nine Tecra M3... (maybe its me!)

  I checked and updated all the drivers downloads and had problems to any Bluetooth (M3 for IPAQ 3970). Found out that if you uninstall Bluetooth Stack and reinstall it the battery but do NOT install Bluetooth Monitor, everything seems to work (as far as I know). Prices Bluetooth Stack Bluetooth Monitor alternative (the installation guide does not suggest it)?

  Thank you all

  JonBer

  Hello JohnBer

  The only thing I can tell you about Bluetooth technology, it's that I use Bluetooth Toshiba Stack to connect to my mobile phone from Siemens. I sometimes use it as modem to check mail short and fast. I have no problem and the connection is fine. I use the wizard of a mobile phone is always properly recognized and I can use it without problem.

  If you have some problems to make the connection between your device and some external device, it can be caused by some false setting. To make good configuration between laptop and mobile phone was not easy. As I said to check all the Bluetooth settings on both units.

• Tecra A4 Bluetooth? There she?

  Newbie here but Ive just got my C Tecra A4 1.5 today and it has the Bluetooth etc software installed and also small icon in my taskbar, but when I try and run it, it says bluetooth is not ready, I didn't it was BT and I am confused why the software was preinstalled?

  Thanks in advance

  Hello brad

  If the unit has a Bluetooth connection in the lower corner there must be a label of Bluetooth. On this page please http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/faq.jsp?z=96&service=EU&FID=tro000000189d. I guess your device doesn't have Bluetooth, but AFAIK it's certainly ready Bluetooth and Bluetooth module can be added extra.

  The image mounted on device is also Bluetooth ready and if you decide to built in software is already installed.

  Good bye

• Tecra S2 bluetooth internal module

  Where can I found out if it's possible to install internal bluetooth module PA3425U-1BTM on Tecra S2 model NUM. PTS20E-01W00MG3? Laptop was purchased in Europe (Slovenia)!

  P.S.: Where can I post a question for an expert... etc.

  Hello Korosec

  I found information that your laptop model is ready for the Bluetooth card. Bluetooth is not inside, but it can be built. I can't tell you that one fits your model, but you can contact the service in Slovenia partner and they can tell you that can be ordered.

• Tecra A3: Bluetooth information exchanger cannot transfer documents

  I have a Tecra A3 and I have already installed the Bluetooth information interchange. The problem is I want to make a copy of my cell phone, a Nokia 6230 safety, I have Windows XP and the problem is that bluetooth does not iniciate... as it says.

  The exchanger recognizes the Nokia but I can't transfer all documents...
  Can you help me?? What should I do in order to make a copy of my mobile security? I tried both with the inalambric vincle and it doesn´t work either.

  Thank you.
  Sandra

  Hello

  Thanks for the info

  Good bye

• Tecra S2: Bluetooth is not ready

  I am Fadi.
  I bought Tecra S2, but I did customize and I added a few extra currencies, one of them was Bluetooth V1.2.I paid for this money, but when I receive the laptop, the bluetooth is not working
  I tried everything,
  1. I have cheacked for the lable of bluetooth on the slot cover and there exists.
  2 - I tried fn + f8
  3 - I tried to install another driver and app.
  4. I've tried everything, but unfortunately there is no positive result,
  5. I put an another usb bluetooth, and it worked very well.

  and explain exactly what happened:
  When I turn on the wifi and bluetooth, I have a msg of receiver ((unknown usb device)) I tried to put its driver but I have nothing.
  and when I try to use bluetooth, I get ((legacy is not ready))so polease I need your help as soon as possible, because I do not know if the bluetooth existing or not, or its need correct driver or something, please I need your help
  Thank you in advance

  Post edited by: fadiart10

  Hello

  As much as I know Tecra S2 has no Bluetooth module, but it is Bluetooth ready. This means that the Bluetooth software is already installed. There are two solutions:
  -You can buy the Bluetooth module and it must be built in or
  -You can use an external Bluetooth device as USB Bluetooth stick.

  Good bye

• Tecra M9 - Bluetooth, problem with mobile ' phone

  I installed Bluetooth stack and a connection via Bluetooth Manager

  But Tecra will connect only as "Network Access Point.

  How can I create a link as modem - I'm probably not using the Tecra via mobile, on the internet but I have certainly you want to use the functionality of modem from mobile phones to send faxes and SMS (text) messages when out and about

  Any help much appreciated

  You must use the custom of "Bluetooth settings" Mode.
  Take a look at the following document called
  "How to set up GPRS DUN via Custom Toshiba Bluetooth Stack Mode"
  on this site:
  http://APS2.toshiba-tro.de/Bluetooth/?page=HOWTO
  and you should make it work.

• Tecra M4 Bluetooth seems to prevent sleep

  Hello. Can someone help me with what looks like a Bluetooth on my Tecra M4 problem? I have the correct Toshiba power settings to put in Standyby after 3 minutes (for example). Which works very well unless I have Bluetooth running in this case, that he won't automatically - standby or Hibernate-I have to do it manually with Fn + F3 (or Fn + F4 for hibernation). Doesn't seem to not make a differnce or not a Bluetooth device is connected or not. Any ideas?

  Thank you.

  -Open the 'control-> Performance Panel"and maintenance-> TOSHIBA Power Saver-> Installation Options
  -Activate the second menu "Change the Power Saver profile... ' and set the correct behavior in AC mode and battery.
  -Confirm by "OK".
  S ' ensure that the current 'profile' for example 'Full Power' is equipped with a hook
  -Click on it and change it for example "eve = 1 minute"
  -Confirm by "OK".
  -Now, wait for 1 minute without touching the system
  -Laptop should suspend now

• Nightmare of Tecra 9100 Bluetooth stack

  Downloaded the last battery bluetooth but keep receiving error message when you try to open the Bluetooth settings

  TosBtMng.ese - Entry Point not found

  The procedure entry point? BdbtNotifyEx2@@YAHPAXIQAXQAHPAUHWND__@@II@Z cound not found in dynamic link TosBdAPI.dll library.

  Can someone help me I've been until 03:00 last two nights on the trot trying to settle this. I have installed and re installed about 10 times had installed and the opening last night, but once done the pairing and connection to the internet has tried the laptop broke. I can't believe how frustrating it is.

  What operating system do you use?
  Installation successful (check the Device Manager if everything that looks good)?
  What type of connection you have configured (DUN, PAN,...)?
  Which device Bluetooth have you tried to connect (mobile phone, access point,...)?
  You have run a virus scan on your system? It seems that something is damaged.

• Tecra 9100 bluetooth and Samsung SGH-D500

  Hello!

  I have some trouble getting my Tecra to send files to my SGH-D500 using software of Samsung's PIM & file manager.

  The app does not see the BT's COM port, it offers only IRDA as a configuration option.

  However, another software connects to the phone OK, so I guess that it is a problem of compatibility between soft Samsung and battery Toshiba BT.

  Toshiba Z500 or D600 procedures did not help.

  Everything works OK with widcomm BT stack.

  Can anyone help?

  Thank you!!

  Hello

  Sorry, but if you use a non-Toshiba software you must check if Samsung support can help you. I have mobile phone Motorola have and transfer of data with battery Toshiba BT is successfully in both directions.

  Good bye

• Tecra 9000 - Bluetooth drivers

  Hello

  I had a hard drive crash, so I format the hard drive and reinstall windows xp pro.
  But now in the control panel there is no bluetooth icon.
  and if I don't get new features, no bluetooth are found.
  so I download the 'drivers bluetooh battery"of Toshiba and the Bluetooth works again but there is no bluetooth icon in the Panel, and I don't like the program that installed the"pile of bluetooth drivers. anyone now how to get the bluetooth to simpel program in control panel appear in?

  Sorry for my bad English.

  Hello

  Are you sure that the Bluetooth icon has been placed in the Panel before formatting the HARD drive? Why you don't like to use the battery driver Bluetooth?
  In addition, you can choose between 2 Control Panel views. Classic and category view. Please check these options. Maybe you have supervised the Bluetooth icon.

  Good bye

• How to install the Bluetooth Module for Tecra S1

  Hello
  I have an old model S1 - PT831E-1DCEE-GR - and you want to install a Bluetooth (PA3121U-1BTM model?), but where should it be mounted?

  Kind regards

  Ulf

  Hello

  I think that on the Tecra S1 Bluetooth is optional.
  So on some laptops the BT has been installed on some not but I think that it should be possible to upgrade the unit with the BT module. (I hope ;))

  To my knowledge, the BT module must be installed in the place under the keyboard.
  But if you have no experience in these procedures you should t remove or install anything!

  The BT card must be placed above the keyboard area.
  To remove or to install the Bluetooth card, you must:
  1. remove the two white flat head screws.
  2 unplug the cable to antenna with the tweezers.
  3. disconnect the cards-SUMI (flat cables) on the system board.
  4 (remove the Bluetooth card) or (install the Bluetooth card)

  Be careful. But as I said above, usually it should be installed by a technician because the guys have more experience... you know

• Tecra M9: Toshiba BT & WLan helmet - preparation of pilot error

  Hi, any guidance appreciated here.

  I have a Tecra M9, Bluetooth stack is v5.10.12. I recently bought a pair of bluetooth headphones wireless (Arena), which works very well with my Orange (HTC) handset. I can pair with the Tecra successfully (on pairing they offer three classes of service BT - sink Audio, headphones and hands-free), but attempts to connect and then come up with a failure message. In a case for a "preparation of the pilot error."

  I have other apps (e.g. Skype) closed at the time, potential suggestions, I can try to get the connection work? What I want is to be able to use it as a wireless for Skype headset. It * should * work... As I said, the pairing seems to work ok, and I can choose "Bluetooth (wave)" in the control panel of audio devices, something is fundamentally good.

  Robert CfG

  HM, odd noises. Tried another battery of BT? I mean, for example, a former on? And can you please give accurate and detailed information about the error messages that appear after pairing and using the headphones.

  It s a very rare error and I guess it should throw something into the section of the driver...

  Maybe we can figure it out, but until I need additional information in this case, no matter which.

  Welcome them

• "Unable to detect the remote device" Bluetooth re Nokia phone

  I have two Nokia phones and can not connect to my laptop Toshiba Tecra via bluetooth

  I am running XP SP3
  V6.10.10 (T) battery Toshiba BT
  Nokia PC Suite 7.0.8.2 version

  Information system in Nokia PC suite pointed out two stacks of BT compatible:
  Microsoft Version 5.1.2600
  Toshiba 6.0.7y19.0
  The help of Nokia says "If your Bluetooth software is not supported by Nokia PC suite, this is mentioned in the information of Nokia PC suite window"
  There is no indication in the information of Nokia PC suite window that my Bluetooth software is not supported.

  I constantly receive a "cannot find the remote device" message when you use Toshiba BT Stack.

  I put my permananently visible to all Bluetooth phones and fortunately they send information to each other.

  For a few seconds, one of my phones connected using the Launcher free config (not something I normally use) but then the phone has disappeared from the screen and now can not be detected.

  I tried
  -turn on and off again;
  -connection by using the Nokia PC Suite application
  -connection by using the BT stack
  -connection using free config
  Without success.

  Any ideas?

  Maybe that your antenna has release the Bluetooth module so that your Bluetooth range is very limited.
  Can you try to move your mobile phones very close to your laptop and the search for your bluetooth phones?
  What is the result of the diagnosis function? :
  (right-mouse click on the Bluetooth icon in the systray-> Options-> Diagnostics-> Run (verification tests))

• Tecra S1, BT Bluetooth

  Hallo,
  I have a Tecra S1. I'm Dutch, if my English is not very good. I use BT but he don/t work. When I click on BT Easy Connect-Dun Wizard I get the message "cannot open device BT ACPI (tosrfec.sys) driver so I'm looking for in my computer to the pilot and I found it. I copied it to the BT file, but nothing works. I'll connect it with my cell phone. So, my mobile phone search BT my computer laptop but get the message "there are no computers.
  What I did wrong or missed something?
  Who can help me?

  Hello

  Are you sure that you have Bluetooth installed in the unit to you? Not all Tecra S1 installed it from factory. Some, but not all. First of all check that out.

  BR

  Tom