cannot network wirelless connection. Help

Similar Questions

• Cannot view or connect to the Wifi network of 5 GHz with Time Capsule from Apple 5th generation

  I have a new Apple Time Capsule 2 TB with 802.11ac network support. I have setup my base station in order to disseminate the 2.4 GHz and 5 GHz network SSID. I have 2 apple (iPad Mini and Macbook Pro) time devices can see and connect to Terminal 5 GHz network however I have also a Lenovo Vibe P1 phone (dual band wifi supported) and Samsung Galaxy Tab S compressed (dual band wifi supported) and these devices cannot see or connect to the network of 5 GHz of Base Station. I also have a Cisco router that has a dual-band support and all my devices can see and connect to the network of 5 GHz of this router.  So I wonder why I have this problem with time capsule?

  I have reset my base twice station and it is a new device purchased last month.

  Any help or suggestion is appreciated.

  Did you use the SMB compatible names for everything...?

  That is to say the alphanumeric short, without spaces and Pure...

  for example base station name... TCgen5

  name TCwifi wireless

  Have you also used the password corresponding to these requirements... but can be between 8 and 20 characters.

  If so, then you must give a different name to 5 GHz and delete the password and test... If it's not yet connect the test manually on channels 36, 44, and 149 for example if you are in the USA...

• An FTP error occurred - cannot establish a connection to the host. Internal data error. Unable to send data from network.

  Recently, I started out of the blue to get this message when I try to connect to an FTP of Dreamweaver. I have CC was last updated. I have like 50 sites, more on different servers and none of them will connect. So I don't know, it can't be a server problem. Yesterday, everything was fine. I made no change what so ever. I uninstalled Dreamweaver and reinstalled him and I get the same thing. It is not the site for 30 seconds and then exhale. As soon as I hit the button to connect as 1 second later, I get this error. I have reset all modems and routers, etc. I can't find anything online about this specific problem. I'm at my wits end. I have projects due, but cannot connect. It's Thanksgiving and trying to solve this problem instead of spending time with the family. Any help would be much appreciated.

  "An FTP error occurred - cannot establish a connection to the host." Internal data error. Unable to send data from network. »

  Nope, that is not the case, I have disabled this service and now it works fine!
  He was not the firewall, but the update 25-nov2014 of Norton Protection against vulnerabilities.  ! Norton is the note and fix it for the next update in the coming days...

  I have

  

• I have a HP G60-214EM laptop and cannot get it connected to my samsung 26 "smart tv. Can anyone help?

  I have a HP G60-214EM laptop and cannot get it connected to my samsung 26 "smart tv. Can anyone help?

  Hello Maureen56,

  I understand that you want to connect your TV to your laptop.

  To connect your computer to your TV HDTV using an HDMI cable, follow these steps:

  1. Locate the HDMI port on the back of your TV. It should be more than one, in order to choose the one that is otherwise unused. Note the port on which you choose.

• BlackBerry cannot accept the connection via the Mobile network?

  Hi all, on Blackberry, I want to open a server socket to listen to a connection come from other devices.

  Here is my code:

  String url = "socket://:12345;deviceside=true";
  ServerSocketConnection scn = (ServerSocketConnection) Connector.open(url);
  SocketConnection sc = (SocketConnection) scn.acceptAndOpen();
  

  Mobile network on that BB is ok, but it cannot accept any connection.

  I also use its mobile phone network to connect to other servers, it works fine when it's the client socket.

  I tried with the Wifi network, and it works very well.

  String url = "socket://:12345;interface=wifi";
  ServerSocketConnection scn = (ServerSocketConnection) Connector.open(url);
  SocketConnection sc = (SocketConnection) scn.acceptAndOpen();
  

  In my view, Network Service Mobile prevented so that other devices connect to it, is it true?

  Please explain it to me, thank you very much!

  This approach only works for mobile connections, when the data are pushed to the device.  You cannot use it to connect to other phones directly.  Sorry

• Cannot get a connection of help after 120 seconds.

  Hello
  
  Cannot get a connection of help after 120 seconds.
  I get this result when I run OpenScript scripts of Test Manager.
  I installed browser support.
  
  Can anyone advise, a solution.
  
  Thank you
  LEA

  Hi Leah,

  Maybe I wasn't clear, you must create a specific Windows user account for the service. Or if your all running on a box, use the account that you are currently using to log on to the service.

  Then go to services, to find the Oracle Oracle Application Testing Suite Agent Service, double-click on and switch to the logon tab. It specify that you want your agent service to run under a different account under the local system account.

  Good luck, Jules

• I can connect to my wireless router, but cannot get internet connectivity via Wireless. If I connect the cable to the port on the router, I get internet connectivity.

  Wireless router / Internet problems

  I am running Windows Vista Home Edition with Security Essentials.  I can connect to my wireless router, but cannot get internet connectivity via Wireless.  If I connect the cable to the port on the router, I get internet connectivity.  Is there a firewall setting that could cause this problem?

  Hello

  Your router could be suspicious here, you have successfully updated its firmware as a possible solution? And I would like to
  Update your WiFi drivers on computers. How you are positioned in the router? Are there
  obstacles in the path?

  Actually try updating your driver and disabling the network logon.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• On a shared PC my side do not connect to the internet but side not affected spouse. I have run virus scan and none detected on its side but can't run on my side, because I can not connect help please.

  My husband and I share a PC. He has his desk top and I have mine, just that recently, I have not been able to connect to what anyone on my side of the PC, but its East side works well, it can connect to the internet, but I can't any idea what should I do? I ran virus scan and his side of own, cannot check the mine but cannot connect help please.

  Hello

  1. you remember to make changes to your computer, after which the issue started?
  2. do you have a cable or a wireless connection?

  I would recommend that you follow these steps.

  Step 1:

  Test the issue in safe mode with network and check if that helps.

  Step 2:

  Configure the connection to obtain an IP address automatically.
   
  a. click "Start", enter "NCPA. CPL"(without quotes) in the search bar and press"Enter. "
  b. right-click on the network connection, and then click "Properties".
  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  c. click Select 'Protocol Version 6 (TCP/IPv6) Internet' and then click 'properties '.
  d. check "obtain an IP address automatically" and "Obtain DNS server address automatically".
  e. click 'OK '.
  f. click Select 'Protocol Internet Version 4 (TCP/IPv4)' and then click 'properties '.
  g. check "obtain an IP address automatically" and "Obtain DNS server address automatically".
  h. click on 'OK '.

  Step 3:

  Follow the steps in this article and check if that helps.

  Why can't I connect to the Internet?

  Steps are also applicable for Windows Vista.

• Cannot use new connection broadband :(

  I recently joined a connection high speed and configure my modem and everything, but in the center of network and connection, it shows that there is a problem. In Device Manager, I get this thing-

  Network adapters-> controller Atheros AR8151 PCI - E gigabit ethernet (NDIS 6.20) this thing appears with an exclamation point
  Double click, it displays a dialog box with this error - Windows cannot initialize the device of this hardware driver. (Code 37)
  I recently installed all drivers, even tried to reinstall it four times, but it did not help.
  Please help me.
  Thank you

  There are drivers here...

  http://www.ASUS.com/motherboard/P5G41TM_LX/

  You must click on the SUPPORT tab, but NOT the one at the top of the Web site that will take you to the general support of ASUS.

  There is another lower SUPPORT tab to the bottom of the page on the right which will take you to your specific model.

  Then click on the DOWNLOAD tab and follow the path to get the drivers for your LAN PCIe device...

• Money is debited from my account each month however creative cloud it says trial expired? I'm paying for Photoshop and Lightroom but cannot use them? Help!

  Money is debited from my account each month however creative cloud it says trial expired? I'm paying for Photoshop and Lightroom but cannot use them? Help!

  Your subscription to cloud shows correctly on your account page?

  If you have more than one email, you will be sure that you use the right Adobe ID?

  https://www.adobe.com/account.html for subscriptions on your page from Adobe

  .

  If Yes

  Some general information for a subscription of cloud

  Cloud programs don't use serial... numbers you, connect you to your cloud account paying to download & install & activate... you may need to sign out of the cloud and restart your computer and log into the cloud for things to work

  Sign out of your account of cloud... Restart your computer... Connect to your paid account of cloud

  -Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html

  -http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

  -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  -http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html

  -ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp

  -http://helpx.adobe.com/creative-cloud/kb/license-this-software.html

  .

  If no

  This is an open forum, Adobe support... you need Adobe personnel to help

  Adobe contact information - http://helpx.adobe.com/contact.html

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  -Select your product and what you need help with

  -Click on the blue box "still need help? Contact us. "

• KB 915597 Def 1.71.26.0 updated - immediate problem of connection to the network; Intel WiFi Link 5100 AGN is present, "working properly", but "there is no network to connect to."

  My "update journal" indicates that this definition has been installed at 05:47 (Saturday 111/21), the same moment where pages failed to load and the small icon of net showed no link. (I had fortunately been web surfing until - filled bars.)

  This is an update "cannot be uninstalled." I did a restore of the system to the previous Thursday, and then to the previous week, without change in condition. . I powered completely off and on again several times, without success.

  There is a note on the update for http://go.microsoft.com/fwlink/?LinkId=52261 - who takes me to a page with a bunch of stuff on the installation of a BizTalk adapter. (snippet below included) This is way beyond my ability to understand... I DON'T know how to edit the registry, but I don't know what to change, if this ' even common sense.

  The update could have messed with the IP addresses?

  I tried net diagnostics ("no network to connect to"); I tried to add a new network - the 'check' the devices window just sits there...

  (Yes, my other devices connected wireless - works perfectly.) The computer has not been moved from its site)

  (This is a piece of the message I get from the url above)
  "You can use the BizTalk for MSMQ adapter and adapter BizTalk Message Queuing on the same computer. However, given that these two adapters use the same port, you must add an IP address to your computer as BizTalk adapt for MSMQ can use. »

  [1] I bought the Dell in August as 64-bit extensible and Dell sent me a Win7 disc...

  [2] indeed, McAfee came with the machine as a trial version...

  [3] I think I might start by reinstalling the Win7 update...

  A1. The Dell computer came with Vista 64-bit SP1 edition? [Yes/No]

  A2. Your current McAfee application is supported in Windows 7 64 bit? [Yes/No]

  If the free trial version of McAfee is always installed, when the free trial period expire?

  If you have purchased McAfee application, did you do before the expiration of the free trial period?  [Yes/No]

  You never downloaded & run a utility named McAfee Consumer Product Removal Tool? [Yes/No]

  A3. Please do not confuse the upgrade your version of Windows with 'update your computer' (e.g. Windows Update), especially in these forums.

  If you've upgraded to Win7 64-bit, you can't "start over by reinstalling the Win7 [upgrade]." If you want to reinstall Windows, you need to reinstall Vista SP1, and then reapply the upgrade to Win7.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• How can I add my laptop to the network and connect to the internet as well

  I have internet access on my computer at home, the ipod, the ipad and iphone.  How can I add my laptop to the network and connect to the internet as well?

  Hello

  I suggest you to refer to the following Microsoft article and check if it helps.

  Add a device or computer to a network:

  http://Windows.Microsoft.com/en-us/Windows-Vista/add-a-device-or-computer-to-a-network

  For more information, see the following Microsoft article.

  http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-home-network

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-you-need-to-set-up-a-home-network

  http://Windows.Microsoft.com/en-us/Windows/explore/home-networking

  Hope the information is useful.

• ICF on Windows 7: how to change the location of the home network be connected?

  Windows on Windows 7 firewall - ' Home or work (private) networks are not connected and 'Public networks' are connected. This prevents the PC to be seen on my home network.

  How can I change the location of the home network be connected?
  I have internet access but cannot connect to a network.

  Go to "Network and sharing Center" > click on "Customize" > change the location of the 'Public', 'private '.

  Edit
  Sorry the above is garbage, I was on mode vista.

  Try, 'network and sharing Center' in the section 'Show your active networks' - it can show 'Public network' or 'work '. If, so click on the one which is indicated and select "home network".

  Note:
  If the other PC on your network are Win XP you can change the name of working group of win7 in "MSHOME".
  IE "network and sharing Center" > click on the arrow down to the network discovery > change settings > tab computer name > change.

• Using Reporting SERVICES report server cannot open a connection to the report server database in SQL server 2008 R2 sp1

  Hello

  I'm running Reporting SERVICES Version 2007.0100.1600.022 ((SQL_PreRelease). 080709-1414 in Visual Studio 2008 with Microsoft SQL Server 2008 R2 Express Edition with Advanced Services (64-bit) on Windows NT 6.1 SP1.)
  Everything seems to work fine except that I can't deploy: "the report server cannot open a connection to the report server database."
  Connection test ReportServer as OK in the Configuration service report manager and Visual Studio. Run reports in Visual Studio against ReportServer and my other databases.  Deployment fails on a report of VM. Remote access is enabled in the firewall, pipes is enabled in configuration Manager SQL server, the permissions for all access in Windows.
  The error in the log file of report Service:
  Library! WindowsService_1! 12ac! 09/23/2012-21: 05:12: e ERROR: ServiceStartThread: Exception caught during the startup of service. Error: Microsoft.ReportingServices.Diagnostics.Utilities.ReportServerDatabaseUnavailableException: the report server cannot open a connection to the report server database. A connection to the database is required for all applications and treatment. ---> System.Data.SqlClient.SqlException: a network-related or instance-specific error all by establishing a connection to SQL Server. The server is not found or inaccessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - error Search Server/Instance specified)
  Any ideas?
  Thank you.
  -Phil

  Just, I solved the problem I had.

  It turns out, there, there were two questions... first concealing the second.

  SQL Web browser has not been activated.  solution: in properties SQL server configuration manager, transformed the startup to automatic mode and activated the service.

  Microsoft Visual Studio project property targetdatasourcefolder had a server name that precedes the name of the folder. Removed the name of the server.  This works.

  Everything unfolds right now.

• Cannot get remote connection to the computer or phone

  Original title: sentinel160GB Network CCTV connection

  I have the apparently mandatory sentinel160GB CCTV and the system works OK, but for the life of me I can't get the remote to my PC or telephone connection to the or see same DVR?  Help

  Hello

  1. don't you get error message when you try to get the remote connection?

  2. you talk about Digital Video Recorder?

  3. were there any changes (hardware or software) to the computer before the show?

  Reply with answers to help you in a better way.

  Click on the below mentioned link to get an idea on how to ask for suggestions in this forum.

  Suggestions for a question on the help forums