Cannot open a Web site on the PCs of users, but the CD/DNS server in the same subnet to open it

Similar Questions

• VPN site to Site on the same subnet of addresses LAN - cannot communicate

  Hello

  I have the VPN tunnel between Site A and B which are both on the same local network.

  Site A has a lan from 192.168.0.0/24 Interior and a demilitarized zone of 10.0.0.0/24

  Site B has a lan from 192.168.0.0/24 Interior

  I have the Setup vpn to communcaite the Site A DMZ with Site B on the inside.

  The two tunnels are in place but I can't ping the other view and vice versa. Also in the DMZ when I ping the 192.168.0.0/24 range timesout ping, I guess that's because the ping is sent inside the line of A site. Also the DMZ is a secuity level 50 and inside the site lan security level 0.

  Is it possible to make this work?

  Thank you

  John,

  This could be a solution.

  If they NAT their network to their Outside IP address this work, but a little bit different from a regular tunnel.

  If they NAT their 192.168.0.0/24 entiner network IP address outside the box of Juniper, then get implemented and they will be able to send traffic and access to your network without problem. However, you will be able to send traffic (start) on their side, because their internal network behind the external IP address. If such translation is called PAT.

  If you need full two-way communication through the tunnel you should ask them to translate their network in a one to one translation database so that they can get to you and you can view.

  The other solution is to translate their network into your ASA. You can do the following:

  192.168.200.0 static (outdoors, DMZ) 192.168.0.0 netmask 255.255.255.0

  With these lines in place, the configuration of the tunnel will remain the same, no change is required. But when you need to access their network you must point the traffic to the 192.168.200.0/24, not the original 192.168.0.0/24 address.

  So, in case you need to access their 192.168.0.10 your DMZ host, you should actually try to access the 192.168.200.10.

  Why don't you give it a shot and let me know the results?

• Cannot access a Web site using Java Script

  Cannot access a Web site using Java Script. I'm not sure what it blocks I use Win 7, Avast free, AntimalwareBytes.
  I get a pop up window with
  Name: mcs
  Location: http://myspeedtest02.windstream.net  
  say "application blocked by security settings, blocking the untrusted application.
  I don't know what it blocks, but suspect it is related to the security of Windows.
  I think that the Java Applet is blocked, but I would like to run this test of speed from my ISP.  I tried to access the website of Google Chrome and IE, with the same result. Nobody knows what this block and how to unlock it?

  This is actually not JavaScript, it's Java.  Despite the name, they are really very very different.

  Java itself can be dangerous, especially if it is not a trusted application.  It is my sincere recommendation that you do not continue.

  If you want anyway, you can go into your control panel, open the Java settings and set it to allow untrusted applications.

• automatic update has made my Firefox Portable browser cannot connect to Web sites, how can I solve this problem?

  When the update for my browser took place, on 05-05-14 @ verse 12: 15, it made the browser cannot connect to Web sites. It does not work in safe mode but not in normal mode. I'm on an hp pavilion dv7, running windows 7. I need to solve this problem as soon as POSSIBLE. Or I'll have to switch browsers, I don't want to do, as I have used Firefox for many years. Can I get help to remedy the situation?

  Hello, normally these problems are caused by a security/firewall software which does not recognize and therefore blocks the new versions of firefox: solve connection problems to websites after Firefox update

• How to block a Web site through the firewall of windows 7 ultimate 64-bit

  I tried to block a Web site, but I found never this kind of option in the windows firewall... the picture is the same in avast internet security which I use also... I don't want some websites to access it on my computer... Please help me solve the problem.

  Hi ramakrishna91,

  1. don't want to block certain websites?

  You will not be able to block the Web site access by using the Windows Firewall, but you can use Internet explorer to access the Web sites by adding these sites in sensitive sites.

  (a) click the Start button, select Control Panel, type Internet options in the search box, and then click Internet Options.

  (b) click on the Security tab, click restricted sites , and then click Sites.

  (c) to add a site, type the URL in the Add this Web site to the zone box, and then click Add.

  Why can't open or copy files from the web?

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-open-or-copy-files-from-the-Web

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Microsoft support family does not - I can't ask a Web site adding the admin

  I set up a computer to a separate user and allow only Web sites that I approved.

  Recently the user tried to go to a Web site that is not on the approved list. They tried by e-mail a request to add the URL to the approved list, BUT when they click on your email request, the window do not appear which allows them to complete the application.

  I tried to manually add the site, but it still does not work.

  I found that adding through an application works better, but for some strange reason, it no longer works.

  Please advise on a solution

  Thank you

  This problem is persistent in recent weeks and hit in all Windows 7 users who I have spoken, but Microsoft still apparently does not respond when asked if they checked things on their end.

  In the meantime, I think I have a solution to your problem with the addition of the site manually.  I assume that you will on the Security Web site for the family, go to the green list and manually add it?  The filter is automatically updated after doing this. Go to the start menu and search for "parental controls." Open the program that simply says "Windows Live Family Safety" and look in the upper right corner for a refresh button. That should force the settings that you changed on the site is taken into account.

• Error message: no Start Page cannot display this Web Site no Start Page has been configured.

  Hello.

  I work with my client technology company to point their domain on the newly published site hosted on Adobe Business Catalyst. They get the following message when they try to point the domain to ABC...

  "No Start Page cannot display this Web Site no Start Page has been configured. To configure a default start page, set one of your Web Pages to the Start Page. Please contact your administrator for more information. »

  This who should I tell them to do. Thank you.

  In the admin of the web site, change the page to the default page and set as start page.

  

• Dreamweaver developer toolbox, we can us it and develop the web site on the duration of the trial. On put option despite. Thank you

  Is it legal or illegal to use it. But I need Dreamweaver developer toolbox, can we it and develop the web site on the duration of the trial. No option to sell despite. Thank you. Does break Adobe right.

  I just I want to use mxkollection and phakt mysqli

  Adobe Dreamweaver Developer Toolbox (MEASURE) was abandoned several years ago. It is no longer available for purchase and the code is NOT open source.

  If you have a registered copy of uninstaller, you can continue to use it, but it is no longer supported, and it only works with specific versions of Dreamweaver.

• How to prevent the FF loading all Web sites using the HTTPS protocol

  FF is trying to load initially all Web sites using the HTTPS protocol, including of mozilla.org. Then I get the error of no reliable connection of course. Mozilla .org is the "invalid security certificate" and "the issuer of the certificate is unknown." I tried to delete the file cert8.db as suggested elsewhere but that did not help. If there is an option for this somewhere, I can't find it. I have the latest version of FF and Win7 running. Thanks for the help.

  There must be some sites that are still using a secure connection, as http://www.amazon.com/. If even a link to Amazon is redirected, you can check if you have an extension like HTTPS Everywhere.

  For Mozilla sites, Yes, you establish a secure connection.

  But you shouldn't get certificate errors! When you get this for virtually all secure sites, the problem is usually as follows:

  (1) error of date, time, or time zone who throw checks validity of the certificates of your system. Sometimes allowing to use a timesource on the internet, the computers can introduce this problem.

  (2) not be set up to work with your security software that intercepts and filter secure connections from Firefox. Products with this feature include Avast, BitDefender, ESET, Kaspersky; AVG has a shield search function which can cause this error on search sites.

  (3) malicious software on your system for the interception of secure connections.

  So... who is?

  If you have any of these specific security products, which would be the first thing to check. We might be able to help with specific next steps based on what you have if you tell us.

  Alternatively, you can examine the certificate to which Firefox is opposed to see if the issuer information pointing to the culprit. Take for example my test page:

  https://jeffersonscher.com/RES/jstest.php

  You should see a section "I understand the risks" in the page. If you expand this section, you will find a button Add Exception. You don't need to complete the process of adding an exception (I suggest not adding one until we know that it is not a problem of malware), but you can use the dialog box to display the information that makes Firefox suspicious.

  Click Add an Exception, and then view. If the view is not enabled, try first the button get certificate. Then in the certificate Viewer, refer to the section "issued by". What do you find here, or under the hierarchy of certificates? I have attached a screenshot for comparison of screen.

• Single-pass does not work for Web sites after the last update of firefox

  Single-pass does not work for Web sites after the last update of firefox. This works in IE and Chrome and it works under windows (when starting the computer), but not with any website in Firefox.

  Firefox 30 spent some less commonly used "Always turned on" plugins "asking to activate. To check and change this to SimplePass, you can use the page modules. Either:

  • CTRL + SHIFT + a
  • "3-bar" menu button (or tools) > Add-ons

  In the left column, click on Plugins. Then on the right, check the control on the right side of the SimplePass.

  You may need to exit Firefox and start it again before it takes effect.

  A little luck?

• All https: Web sites know the untrusted certificate errors and appears as the provider cert Digitalmarketresearchapps Pty Ltd. No virus found on my system.

  I started all of a sudden the problem "untrusted connection" on earlier work https: Web sites with the "not provided any transmitter channel" as a reason. I tried all the proposed solutions and nothing works. I ran several programs antivirus and no viruses or malware detected. I don't have any such installed ESET suggested in the previous solutions. Display of certificates for the default sites shows that the provider in all cases is 'Digitalmarketresearchapps Pty Ltd'. Certificates are always a start date and an expiration of 2039. I think I picked up something that causes the problem, but as I said, none of my antivirus/malware programs are detecting anything.

  I had this problem as well, and he ended up caused by the installation of the E-Rewards application notify. I had to uninstall and then restore my computer to an earlier time to fix the signer of the certificate again to "Thawte Consulting (Pty) Ltd". I contacted E-Rewards to let them know and ask why this is happening.

• I have type in a new web site in the address bar. Press enter, nothing happens? Went to internet expl. ORER and tried. It worked. Uninstalled Mozilla twice. reinstalled. Still, the address bar does not go to the new site. What I am doing wrong?

  I type in a new web site in the address bar. Press ENTER. Wait. Wait. type in the same new website in the search bar. It goes straight. Uninstalled Mozilla twice. Reinstalled. Tried to go to a new web site. you press on enter. Nothing. What I am doing wrong? I tried this procedure in Internet Explorer and the new address was excluded.

  Hi markehrmann,

  I'll try from Firefox Firefox to solve the issues in Safe Mode. If you do not have the issue so that all your modules, extensions, and themes are disabled, you can try adding them in one by one until you find the culprit. You should look at the guide to troubleshooting Extensions and themes and article troubleshooting issues with plugins like Flash or Java to solve common Firefox problems as well.

  Hope this helps!

• I use iWeb to update a Web site and the objects appear in Safari unless you have a hyperlink when they download.  Is it because iWeb can only support a limited number of links, hypertext, or any other reason?

  I use iWeb to update a Web site and the objects appear in Safari unless you have a hyperlink when they download.  Is it because iWeb can only support a limited number of links, hypertext, or any other reason?

  It has been much discussed.

  See my solution in this post:

  Re: Re: iWeb Publishing Solution in El Capitan

• I have accidentally hidden options menu on my browser, so I can't type in a Web site in the address bar and I don't know how to view again?

  I have accidentally hidden options menu on my browser, so I can't type in a Web site in the address bar and I don't know how to view again?

  For more information about how to restore, see the what happened to the file, edit and view menus? article.

• Internet diagnosis Uverse runs whenever online for the 3 first sites until I run their diagnosis, and then traverse the requested Web site. The diagnosis can never find anything.

  original title: At & t uverse internet
  Use internet AT & T Uverse, their diagnosis happens every time I go online for the first 3 sites until I run their diagnosis, and then traverse the requested Web site.  The diagnosis can never find anything.  Works great after that.  Is something my tracking sites and interrupt my process?

  Hi Chelsea,

  ·              When you get the run diagnostics?

  ·              Do you get this message in the browser or is it a popup on the computer?

  It would probably be best for you to contact uverse support to see why this is happening.