Cannot open the aol system information. I did a quick restore recently and after doing so, the aol system information would not open

Similar Questions

• WMP cannot play the dvd because it is not able to activate the analog copy on the output display protection.

  using windows 7 in my HP Pavilion a1110n desktop and cd plays end. When I put a dvd, it won't play. The reason he gives is that "it is not possible to activate the analog copy on the output display protection." He also told me to try the update driver for the video card. I went into the menu devices and he had to manually update the graphics card - but it just says that the more recent driver already installed! What makes things worse is that I can't just walk out of the old graphics card because it is integrated in the motherboard! Please, any ideas?

  using windows 7 in my HP Pavilion a1110n desktop and cd plays end. When I put a dvd, it won't play. The reason he gives is that "it is not possible to activate the analog copy on the output display protection." He also told me to try the update driver for the video card. I went into the menu devices and he had to manually update the graphics card - but it just says that the more recent driver already installed! What makes things worse is that I can't just walk out of the old graphics card because it is integrated in the motherboard! Please, any ideas?

  =======================================
  The following links may be worth a visit:

  (2004673) Windows Media Player cannot
  read the DVD because it is not possible to
  turn on analog copy on the output protection
  view
  http://support.Microsoft.com/kb/2004673

  Windows Media Player cannot play the DVD because it is not
  possible to put on the protection against analog copying on the output screen
  http://www.Microsoft.com/windows/windowsmedia/player/Webhelp/default.aspx?&mpver=12.0.7100.0&ID=C00D1167&ContextId=61&OriginalID=C00D1167

  And... the free VLC Media Player may be useful to
  a trial... it will play anything.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  VLC Media Player (32-bit Version)
  http://www.filehippo.com/download_vlc_32/
  (works on XP, Vista, 7, 8)
  (the name of the file to download is: vlc - 2.0.5 - win32.exe)

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  VLC Media Player (64-bit Version)
  http://www.filehippo.com/download_vlc_64/
  (works on XP, Vista, 7, 8)
  (the name of the file to download is: vlc - 2.0.5 - win64.exe)

• "Cannot install the printer. Operation could not be performed. error 0x000003eb.

  I'm running Windows 7 (not Vista) and trying to install a Kodak printer driver and get "cannot install the printer. Operation could not be performed. error 0x000003eb"I searched constantly everyday for a fix. You have a solution other than what answers are already in this forum.  I uninstalled and reinstalled tried wireless and usb, installation driver separately, tried to install it in safe mode, run now utility scan.  I think that the problem began with an update of Windows 7 which has hung up and eventually having a corrupted file?

  Hello

  What is the exact model of the printer number? I suggest you to check if the printer is compatible with Windows 7: http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx If the printer is compatible, then uninstall all the drivers connected the printer to the computer, download the latest drivers from the website of the manufacturer, the install without connection to the printer. Connect the printer when it prompts. If the problem persists, contact the printer manufactrer for assistance http://support.en.kodak.com/app/contact/selected/true For more information see: http://support.en.kodak.com/app/answers/detail/a_id/1258/kw/Unable%20to%20install%20printer/related/1/selected/true Note: The use of third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• cannot access the rows of a table not nested element

  What Miss me? I'm under Oracle 12 c (12.1.0.1.0)

  CREATE TYPE dim_O AS OBJECT )

  dimension_id number

  label_en varchar2()300( )

  );

  CREATE TYPE dim_T AS TABLE OF dim_O;

  DECLARE

  dims_t dim_T

  START

  SELECT CAST(MULTISET( )) 

  SELECT  DIMENSION_ID LABEL_EN

  DE    DIMENSIONTABLE -actual physical table in oracle

  OÙ   DIMENSION_ID IN (3001 3002 3003()

  ) AS dim_T) "dim_rec"

  BY dims_t

  DE    DOUBLE;

  FOR I IN dims_t. FIRST... dims_t. LAST LOOP

  DBMS_OUTPUT. Put_line() dims_t() I). dimension_id);

  END LOOP;

  -exit from the loop above is

  -3001

  -3002

  -3003

  -The following statement fails: cannot access the rows of a table not nested element

  UPDATE TABLE ( SELECT dimension_id FROM TABLE (dims_t) ( )

  Dimension_id SET = WHERE = dimension_id 3004 3003

  -The following statement fails: cannot access the rows of a table not nested element

  UPDATE TABLE ( SELECT dimension_id FROM TABLE (CAST (dims_t in dim_T () ) ( )

  Dimension_id SET = WHERE = dimension_id 3004 3003

  
  

  END;

  I'm trying to understand this example very simple, but to no avail.

  Can someone tell me why I get this error?

  Thank you all in advance for your time.

  Marc

  What Miss me? I'm under Oracle 12 c (12.1.0.1.0)

  CREATE TYPE dim_O () AS OBJECT

  number of dimension_id

  label_en varchar2 (300)

  );

  CREATE TYPE dim_T AS TABLE OF dim_O;

  DECLARE

  dims_t dim_T;

  BEGIN

  SELECT CAST (TYPE MULTISET)

  SELECT DIMENSION_ID, LABEL_EN

  OF DIMENSIONTABLE -actual physical table in oracle

  WHERE DIMENSION_ID IN (3001,3002,3003)

  () AS dim_T) 'dim_rec '.

  IN dims_t

  FROM DUAL;

  I'm IN dims_t.FIRST... dims_t.Last LOOP

  DBMS_OUTPUT. Put_line(dims_t (i) .dimension_id);

  END LOOP;

  -exit from the loop above is

  -3001

  -3002

  -3003

  -The following statement fails: cannot access the rows of a table not nested element

  UPDATE TABLE (SELECT dimension_id FROM TABLE (dims_t))

  SET dimension_id = dimension_id = 3003 3004 WHERE;

  -The following statement fails: cannot access the rows of a table not nested element

  UPDATE TABLE (SELECT dimension_id FROM TABLE (CAST (dims_t as dim_T)))

  SET dimension_id = dimension_id = 3003 3004 WHERE;

  END;

  I'm trying to understand this example very simple, but to no avail.

  Can someone tell me why I get this error?

  You get it because dims_t is an array of OBJECTS - not a table of scalars. But your SELECT statement returns scalar.

  There IS NO such object, named "dimension_id"; It is an ATTRIBUTE of the object DIM_O. DIMENSION_ID is a SCALAR which, as says the exception, is a "No nested table element; If you cannot select/Update lines of it.

  What you do is equivalent to the following:

  DECLARE

  dims_t dim_T;

  number of dim_id;

  dim_o design;

  BEGIN

  Design: = dim_o (3, 'ghi');

  SELECT DIM_O (DIM_ID, LABEL) BULK COLLECT INTO table DIMS_T (d_o);

  end;

  /

  ORA-06550: line 7, column 59:

  PL/SQL: ORA-22905: cannot access the rows of a table not nested element

  ORA-06550: line 7, column 1:

  PL/SQL: SQL statement ignored

  This SELECTION is trying to design it as a table when it's a SCALAR - so the same exception you get.

• I just recently upgraded to OS El Capitan.  Now, none of my movies to quicktime does not work.  I have the old version of Quick time 7 and it does not work either.  They do not convert.  Help?

  I just recently upgraded to OS El Capitan.  Now, none of my movies to quicktime does not work.  I have the old version of Quick time 7 and it does not work either.  They do not convert.  Help?

  VLC will play them?

  http://www.videolan.org/

• Lightroom cannot use the catalog because it is not writable and cannot be opened

  My catalog is on an external hard drive and I lost the connection, resulting in an error message "Lightroom can't use the catalog because it is not writable and cannot be opened" to come.

  There was no lock file to delete, and I deleted the log file. All write permissions have been verified on the hard disk, catalog and subfolders and I leave and I always get this error message.

  How can I get rid of this message and gain access to my catalog again?

  I'm on windows and not Mac. Thank you for your time, but I have already contacted Adobe via a chat service and the catalog has been corrupted. They fixed. Thanks again for your time.

• Whenever I open a PDF document, I get a screen pop all few minutes cabbage Adobe.ARM says Windows cannot access the specified... maybe not permissions.  Otherwise, the document is correct.  How can I get rid of this message?

  Although PDF documents open and close normally otherwise, I get of an annoying pop-up message as follows box:

  Head: C:\Program Files (x 86) \Common Files\Adobe\ARM\1.0\AdobeARM.exe

  Message: Windows cannot access the specified device, path or file.  You can not have the appropriate permissions to access the item.

  I just continued to closing the message only to reappear a few minutes later, if I close it up!  Is there a way to get rid of this?

  Moved to forum Adobe Reader.

• Error Windows Media Player cannot play the file because "it might not be a sound device installed on your computer.

  Original title: Media Player

  THE FOLLOWING IS a MESSAGE I GET WHEN TRYING TO DOWNLOAD FILES: "Windows Media Player cannot play this file because there is a problem with the audio device.  "It might not be a sound device installed on your computer, it can be used by another program, or it might is not working properly.  What "audio device" are talking about?

  Hello

  1. do you get an error with this error code?

  2 have you installed multiple audio devices on your computer?

  3. what version of Media Player do you use?

  4. were you able to play the files using Media Player without any problem before?

  5 did you a recent software or changes to the material on the computer?

  Audio device is the part that allows sound from the computer. If the appliance is used or if the drivers are corrupt, then you can get the error message.

  I suggest you go through the steps and check.

  Method 1:

  Quit other programs that may be using your sound device, and then try to play the file again.

  Method 2: Install an updated driver.

  Step 1: Firstly uninstall the audio driver from Device Manager and add or remove programs

  How to change or remove a program in Windows XP

  http://support.Microsoft.com/kb/307895

  a. click Startand then click Control Panel.

  b. click Systemand click on the hardware tab, then click Device Manager.

  c. to the title sound, video and games controller, check the sound card that is listed.

  d. right click on the sound card and then click on uninstall the driver.

  Step 2: To see if an updated driver is available, use Windows Update or access the sound device manufacturer's Web site.

  Follow these steps to do the same thing:

  a. click Startand then click Control Panel.

  b. click Systemand click on the hardware tab, then click Device Manager.

  c. the title sound, the video controller and games, make sure that the sound card is listed.

  d. right click on the sound card and then click Update driver to install the latest version of the driver.

  e. visit the sound card manufacturer's Web site to determine if a newer version of the driver is available for download.

  Method 3:

  If you have multiple audio devices installed on your computer, try to use another. The selected audio device might not support Secure Audio Path (SAP).

  Additional reference on:

  Resolution of the problems of reading in the Windows Media Player for Windows XP

  http://support.Microsoft.com/kb/306317/

  Hope this helps and keep us informed if you need help.

• Cannot complete the preview. There is not enough memory. ID = - 108

  We run CS5.

  One of our customers sent us a file they would like printed.  The file is 1 MB in size and format PDF - nothing unusual about any of this.  As usual, I saved the file and tried to open it in Illustrator to put up a test for our client, and check and make sure the file is print-ready.  I received the error message: "cannot complete preview.  There is not enough memory. ID = - 108".  I press OK and it opens an empty file with some benchmarks of this crop.

  I tried to find a solution online, but all who have this problem seems to have virtually no RAM.  I am currently running on a computer brand new with Windows 7, 16 GB of RAM and Intel Core i7 processor.  I didn't think my RAM or cache have been the problem, but just to be safe, I turned off the computer, let it rest for a few minutes and it starts again.  The same problem.

  I am able to open the file in Photoshop and Acrobat - but even when I save the file in a lower resolution and turn it into a jpeg file, it will not always be open.  I get the same error.

  I need to be able to work with this file.  How can I solve this?

  Thank you!

  Josh,

  What happens if you create a new document and then try file > place the awkward file in it?

• Windows cannot access the specific file, you may not be authorized

  I get a message (windows cannot access the specific file, that you will not

  authorization) it comes to my Bernina software.  I've been using this software for 10 years

  Hello

  Have you tried running the program by right clicking > select run as administrator?

  You want to reinstall using the same method of click with the right button on the install.exe or setup.exe > select run as administrator.

  See you soon.

• Cannot remove the r ' only R backups, not enough space

  I have V3.01.1037.00 R & R installled on my son's cell phone.  It has a few old R & R backups that I want to delete.  I ran R & R programs in the list and found the Advanced tab, which allows me to delete the backups... but when I try and remove the one it says (after request confirmation and "Please wait while the backups are deleted"):

  "Rescue and Recovery has not enough space disk to perform the requested operation"

  and then do nothing.  I tried turning the properties from the Recycle Bin to "do not move files to the Recycle Bin" in case that was the problem, but that did not help.

  Backup file is 15 GB (!), free space on the disk is 5 GB.

  leamphil, welcome to the forum,

  removal of the last backup that was made on his own, and then the others worked for other members.

  Hope this helps

• My mother in disk hard laws burned and I replaced it with a new one when I went to reload the operating system, it would not accept the access key. How can I get a new one? with out having to buy new software?

  How can I get a new access key for windows xp pro?

  Hello

  There are several potential issues at stake here.

  First of all, make sure that you use the Windows product key is for the full XP Pro version not the upgrade version.

  Secondly, many manufacturers of computers for the last few years have provided computers with Windows XP installed, but a product key of Vista on the side.  If this is your situation, you need to call the manufacturer of your computer for the installation media or call microsoft to "downgrade rights."

  Thirdly, if you use a product key that was provided for Windows XP Service Pack 3, and you use the older installation media, it will not accept this product key.  You need to get your hands on support for XP Service Pack 3.

  Hope that helps.

• "Cannot use the catalog because it is not writable and cannot be opened.

  Lightroom 6.5 8.1 Windows

  I get this error message. However, the catalog is here. I also opened LR in administrator mode, but that doesn't help either.

  The old catalog in a new catalog import does not work either. I've worked since the last backup.

  You kindly give a retrieve from the catalog import tool?

  The permissions are set correctly, and as I said, I also started LR with administrator privileges. Same result.

  I ended up using sqlite, saved lrcat file in sql file and initialized in lrcat file. Everything works. I don't understand why Adobe does not offer a repair service to do the same. It cost me 30 minutes of searching on Google.

• Pavilion g series: cannot access the recovery partition & disk do not work

  Try to reset the computer to factory since it does not start in Windows.

  When I try to enter in recovery "esc then F11" it will just try to load windows. Recovery partition is still there just can't access.

  So I try to use disc 5 figure set I did 3 years ago & it starts on the 1st cd, but I get a message saying that the disk is not for this computer.

  I'm like what?  This computer rendered & I have the best recollection no changes to anything that should have caused the recovery to think that there is another computer.

  Suggestions on what I might have to do in order to recover my computer to the factory?

  How can I access the partition recovery from normal mode does not work?

  Why the hell does not work my cd?

  I bought the computer again.

  Any help would be greatly appreciated.

  onelunger wrote:

  Thanks for the suggestion, but I can't return to Windows, even in safe mode.

  If this is the case, then you need the recovery media you can perform a factory image recovery.

  You can remove the hard drive and connect it to another PC through an external drive enclosure or a usb cable to sata. Which will allow you to copy your important data from the drive to another device of storage for extra security.

• Cannot install the logitech harmony program, error: not supported

  Title; program logitechharmony

  don't get not compatible with soft micro, but worked on the old program soft micro

  Hi Willumla,

  According the description preceding, I understand that you have problems with the Logitech Harmony program.

  I would be grateful if you could answer the following questions:

  1. what operating system currently installed?
  2. What is the model number of your Harmony remote?

  If you use Windows 8, see this link to make older programs compatible Windows 8.

  http://Windows.Microsoft.com/en-us/Windows-8/older-programs-compatible-version-Windows

  If you use Windows 7, check out the following link and download the software.

  http://www.Logitech.com/en-us/support/harmony-one-advanced-universal-remote?section=downloads&CRID=410&OSID=14&bit=32

  If the problem persists, I suggest you to ask your question in the Forum of Logitech.

  http://forums.Logitech.com/T5/harmony-universal-remotes/CT-p/harmony_remote_controls

  If anything is unclear or if you have any doubts, please reply to this message and we will be happy to help you further.