Cannot open the attachment in gmail using my iPad PDF... just send me print options

I can't open the PDF attachment in Gmail using my Ipad

To open an attachment in Gmail PDF on your iPad, please take a look at the section "opening of Gmail' to the following FAQ document.

How to open PDFs in Adobe Acrobat Reader for iOS, part 2 (iPad version)

Please let us know if you have any additional questions.

Thank you.

Tags: Adobe Document

Similar Questions

Cannot open the attachment in yahoo... says the file is used by another program... trying to open Microsoft Picture It!

Cannot open the attachment in yahoo... says the file is used by another program... trying to open Microsoft Picture It!

Minnie3,

You may need to change the default program that opens the images.

Take a look at the following link for more information: http://windows.microsoft.com/en-us/windows-vista/Change-which-programs-Windows-uses-by-default

Hope that helps!

Cody C
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.

Cannot open the attachment sent with Outlook Express

I have Windows XP. I use my processor Works 8. He worked for many years, suddenly it doesn't. When I create and send a document using Outlook Express, the receiptant cannot open it. It is the standard verbiage that works may not support, the file can be used by another application, etc. After much frustration, I find now that if the document is sent attached to Outlook Express cannot be opened from the accessory, it can be opened if the receiptant saves the attachment to its documents and open it from there (which becomes tedious). I have now discovered that if I send the document as an attachment by using a free email program from Yahoo (Rocketmail) it can be opened from the attachment. The problem seems to imply of Outlook Express. Any suggestion would be appreciated.

Take a look at this also:

http://answers.Microsoft.com/en-us/IE/Forum/IE8-windows_other/email-attachment-will-not-open-even-though-created/8177e53b-8095-4B02-a47e-95903b3873e6

Cannot open the attachment

What should I do to be able to open an e = Power Point e-mail attachment marked PPTX?

Hello

You need Microsoft PowerPoint, PowerPoint Viewer or a compatible program like OpenOffice.

Microsoft PowerPoint - trade program
http://Office.Microsoft.com/en-us/PowerPoint/FX100487761033.aspx

MicroSoft Office viewers - free
http://Office.Microsoft.com/en-us/downloads/HA010449811033.aspx

OpenOffice - free
http://www.OpenOffice.org/

Then you must configure as PPS and PPT PPTX (do all)

Cannot open. Attachments PPS directly from Windows Mail in Windows Vista PPS PPT (DOC & PDF see links)
http://www.Winhelponline.com/articles/149/1/Unable-to-open-PPS-attachments-directly-from-Windows-mail-in-Windows-Vista.html

To do the above to use this method to start Regedit.

Logon as administrator then:

Start - type in the search box-> Regedit - find top - make a right click on it - RUN AS ADMIN

--------------------------------------------------

For the PowerPoint Viewer, you must download and install all 3 of them.

Download - SAVE - go to where you put them - click on - RUN AS ADMIN

PowerPoint Viewer - free
http://www.Microsoft.com/downloads/details.aspx?FamilyId=048DC840-14E1-467D-8DCA-19D2A8FD7485&displaylang=en

PowerPoint Viewer SP1 - free
http://www.Microsoft.com/downloads/details.aspx?FamilyId=e985ed98-5003-4DC1-88ec-3e151e4dc790&displaylang=en

PowerPoint Viewer SP2 - free
http://www.Microsoft.com/downloads/details.aspx?FamilyId=A208E535-C639-435D-85DD-5261D3A5F6A5&displaylang=en

I hope this helps.
Rob - bicycle - Mark Twain said it is good.

Cannot open the attachment xls

I can't open xls attachment. He tells me to choose the program I want to use to open the file and then nothing happens. Any ideas?

You must have Excel (part of Office) or an intstalled of Excel Viewer on your computer to read .xls files...

And you must set your file Associations, so that the .xls files get opened by Excel.

Here is the download link for Microsoft Excel Viewer free:

http://www.Microsoft.com/downloads/details.aspx?FamilyId=1CD6ACF9-CE06-4E1C-8DCF-F33F669DBC3A&displaylang=en

Excel Viewer open, view, and print Excel workbooks, even if you don't have Excel installed. This download is a replacement for Excel Viewer 97 and all previous Excel Viewer versions.

And to set file Associations:

http://articles.TechRepublic.com.com/5100-10878_11-6172036.html

How do I... Change file extension associations in Windows Vista?

See you soon.

Mick Murphy - Microsoft partner

My Firefox browser cannot access the Internet, so I use my iPad.

I forgot that I have to use my iPad email. My office is not talking about the Internet this week. Troubled shooters are no solution. The closest I can come the problem is a message from the homepage on chrome. It says 'DNS probe finished. "
no internet"not much to go for me in any case. Appreciate any help that anyone can provide. I suspect a proxy problem, but it's way above my head. I am former over the years and the new in computer talk, so be simple in steps to resolve. Thank you. George sends.

_{Edit: removed personal information for your protection. (philipp)}

Type of topic: preferences #advanced< enter > in the address bar.

Under Advanced, select network.
Search for configure how Firefox connects and then press the settings button.
If you use a proxy server, make sure that these settings are correct. If there is no
proxy, first use No. Proxy. If there is a problem, then try Proxy system.

Some problems occurs when your Internet security program has been implemented.
trust the previous version of Firefox, but not more acknowledges your
update as being approved. Now how do I solve the problem: to allow
Firefox to connect to the Internet
- Make sure your Internet security software is up-to-date (for example, you are using the latest version).
- Delete Firefox to list your program of programs approved or recognized. For detailed instructions, see
Configure the firewall so that Firefox can access the Internet. {web link}

Cannot open the file "File" is used by OS x and cannot be opened

After upgrading to El Capitan, files in my disk NTFS external HARD dimmed and are unavailable.

After you copy the file into my macbook, it keeps prompting 'File' is used by OS x and cannot be opened.

Help, please.

Please, back up all data before proceeding.

Select the text on the bottom line by dragging on it. Do not include white space at the end of the line. The text should be highlighted.
```
xattr -d com.apple.FinderInfo
```
Copy the selected text in the Clipboard by pressing Control-C key combination.

Launch the Terminal application in one of the following ways:

☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

☞ Open LaunchPad and start typing the name.

Paste in the Terminal window by pressing Command + V, then press the space bar.

Now switch to the Finder and select the items in question. Drag into the Terminal window. More text will be added to what you entered.

Click in the Terminal window to activate it, and then press return.

Wait for a new line ending with a dollar sign ($) to appear. You can then quit Terminal. Test.

Cannot open the attachment pdf was sent to me on my computer Vista 32. My computer starts to open then nothing

Remember - this is a public forum so never post private information such as numbers of mail or telephone!

Ideas:
- You have problems with programs
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
You need Adobe Reader to open pdf files.
Here is the download link: it's a free program.
http://get.Adobe.com/reader/

t-4-2

Cannot open the attachment in Acrobat 9 in Citrix. "A version update to Acrobat is required... »

How can I fix this error? We could open any pdf until recently in the last days. I don't know if this is because the user has created this doc in a newer version of Acrobat, but the message full error is 'there was an error opening this document. An updated release of Acrobat is required to open this document. »

Hi civilclerk1,

It seems the PDF Creator have set the target version higher than that you have installed on your machine.

You will need to check with the person who actually created these pdf files.

How the hell can I save a legacy version of Illustrator CC 2015 so that older versions can open the file? He used to be a simple case of an option in "file - save as HELP!

Can someone tell me please in the sense of how I now save down from Illustrator CC last in a legacy file?
Thank you

Hi Jenny

You can choose the version inherited in the Illustrator Options dialog box, while saving the file.

Thank you

Simart

Adobe

I just downloaded El Capital 10.11.4 and now cannot open an attachment (Word) in the mail.

I just downloaded El Capital 10.11.4 and now cannot open an attachment (Word) in the mail. I tried to click on highlight and trying to save but not luck.

You have Word? Office 2004 won't work with El Capitan.

You can save the attachment and then try to open it to see what happens. If it still does not open, try to open Word or Pages or TextEdit and use the command open.

recover my system. used to install Windows Vista. get the message cannot open the file E:\Sources\Install.wim. Also the code error 0 x 80070002

So all this started because I tried to clean my computer to give to a friend. I tried refomatting the hard drive, but something was wrong here. After that, when I turn on the computer I get a black screen with message Bootmgr missing. I read a little inside and saw that I could download a Windows Vista recovery disk because my computer did not come with one.
After that I downloaded and burned the ISO image to a CD, things started looking better. I got to the screen when you select the language and keyboard. Then install windows screen. My options there were 'Install now' and 'repair your computer '. When I try to install, I put in my product key that seems fine. The next message I get is "Windows cannot open the required file E:\Sources\Install.wim. The file does not exist. Make sure all files required for installation are available, and restart the installation. "Error code: 0 x 80070002.
When I try to repair, he said "select an operating system to repair, and then click Next."
Operating System: Windows Vista (TM) Home Basic (recovered)
Partition Size: 34318 MB
Location: (D :) ACER
If you do not see your operating system listed, click on load drivers to load the drivers for your hard drives. I try to select Windows Vista retrieved and clicked Next, but what is said "this version of system recovery options is not compatible with the version of windows that you want to repair" or get a recovery of tools such as repair system, System Restore, complete pc windows, tool windows and command promy memory diagnostic restoration. the only problem is he says operatins system: (unknown) unknown local disk...

Any help would be appreciated. Really want to give my friend a laptop that wont even turn on. Laughing out loud

Was it Neosmart?

This isn't an installation disc. It's a record of startup repair!
You use the repair disk option, not Install.

How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.

There is no Vista free download legal available.

https://secure.TX.Acer.com/rcdb/main.aspx?brand=Acer

Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

Normally, they do this for a cost of $ small.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

Normally, you have to press F10 or F11; Acer is in some models Alt + F10 at startup to start the recovery process...

Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Ask them if you can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

They will tell you how to do this.

Every computer manufacturer has their own way of making recovery disk/s.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
A good Vista DVD contains all versions of Vista.
The product key determines which version of Vista is installed.

There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

http://support.Microsoft.com/default.aspx/KB/918884

MS advice on the conduct of clean install.

http://www.theeldergeekvista.com/vista_clean_installation.htm

A tutorial on the use of a clean install

http://www.winsupersite.com/showcase/winvista_install_03.asp

Super Guide Windows Vista Installation

After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

Save all data, because it will be lost during a clean installation.

See you soon. Mick Murphy - Microsoft partner

Cannot open the lightroom catalog called "Lightroom Catalog" because it's too new to be used by this version of Lightroom. You want to select a different catalog? This is the message when I first click on LR and I have no idea what do to m

Cannot open the lightroom catalog called "Lightroom Catalog" because it's too new to be used by this version of Lightroom. You want to select a different catalog? This is the message when I first click on LR and I have no idea

Hi steves

This means that you try to open a catalog from Lightroom CC/6 in an earlier version of Lightroom

What version of Lightroom you have installed?

Concerning

Assani

Have you tried all the recommendations, but cannot open the videos on web pages. Using windows xp

Cannot open the videos sent by family. Most recent on picasaweb.google.com. But also cannot open videos on youtube. Have tried all the recommendations but nothing works. Think I've downloaded all the latest add-ons required with no results. Don't know what else to do.

Hi AntonioGodinho,

Follow the suggestion given in this article to resolve the problem:

The video problems with Internet Explorer

RTE de LV cannot open the project files that include references .lvlib in dependencies

I am writing a DLL LabVIEW to inspect the LabVIEW project files, and I noticed that if a project has a .lvlib reference in its dependencies, then the Run-Time Engine is contradictory on whether or not he can find the project file:
- Project.Open returns error 7 (file not found)
- Project.GetFileLVVersion is a success
Here are some excerpts from my code of G and C engaged in this behavior:
```
   int openStatus = StatusSuccess;

   char * projectVersion = createStringWithLength (VersionStringLength);
printf ("Analysis %s\n", pathchaine);

   OpenProject (pathchaine & openStatus, projectVersion, VersionStringLength);

   printf ("  project written in LabVIEW %s\n", projectVersion);
If (openStatus is StatusSuccess)

   {

      printf ("  Open the project file.") \n") ;

   }

   on the other

   {

      printf("Error: could not find Project file, or file was not a Project file (Error code %i).\n», openStatus);")

   }
```
However, when running in the development environment, the two methods are successful.

Is this a bug, and if so, is it fixed in 2014 of LabVIEW?

Here's how you can reproduce:

Prerequisites:
reference .lvlib to break dependencies Project.Open in LV RTE
```
$ make

patch the file "builds/platdefines.h.

GCC - std = c99 g OpenProject.c o OpenProject.exe - lOpenProject - Lbuilds
```
6. type "c:\xtra\temp\OpenProject.lvproj" OpenProject
```
OpenProject $ 'c:\xtra\temp\OpenProject.lvproj '.

Analysis c:\xtra\temp\OpenProject.lvproj

  Project written in LabVIEW 13.0

  Open the project file.
```
7. the opinion that both call nodes execute correctly.

8. type "c:\xtra\temp\OpenProjectWithLvlibDep.lvproj" OpenProject
```
OpenProject $ 'c:\xtra\temp\OpenProjectWithLvlibDep.lvproj '.

Analysis c:\xtra\temp\OpenProjectWithLvlibDep.lvproj

  Project written in LabVIEW 13.0

Error: Could not find the project file or file was not a project file (error code 7).
```
9. notice that the node version managed while the open failure.

10 type diff OpenProject.lvproj OpenProjectWithLvlibDep.lvproj
```
$ diff-u OpenProject.lvproj OpenProjectWithLvlibDep.lvproj

-OpenProject.lvproj  kills Nov  4 11:28:28 2014

+++ OpenProjectWithLvlibDep.lvproj      kills Nov  4 11:32:37 2014

@@-13,7 + 13.11 @.

       true

       fake

       

-      

+      

+          

+              

+          

+      

       

          

             true
```
Here's another way to trigger this behavior, which shows that LabVIEW occasionally Range the element dependencies:
Add to the project a new VI and place the constant path of file "Application Directory" his block diagram.

Select ""leader "Save All (this project)" and use the default name for the new VI.

Type 'c:\xtra\temp\OpenProject.lvproj' OpenProject

Notice that there is a mistake once again, as is expected.

Remove the "Application Directory" path of file constant

Select ""leader "Save All (this project)"

Type 'c:\xtra\temp\OpenProject.lvproj' OpenProject

Note that the problem has disappeared, as is expected.

Add the "Application Directory" path of file constant in the block diagram.

Select ""leader "Save All (this project)"

Type 'c:\xtra\temp\OpenProject.lvproj' OpenProject

Notice there is no problem, which is surprising, because that there should be a mistake because the dependencies item was not tidy.

Close the new VI and pull out of the project.

Select ""leader "Save All (this project)"

Open "OpenProject.lvproj" in a text editor.

Note that the dependencies item was put away.

Add VI back to the project.

Select ""leader "Save All (this project)"

Type 'c:\xtra\temp\OpenProject.lvproj' OpenProject

Notice that there is a mistake once again, as is expected.

NInjaneer_wow wrote:

The same behavior occurs in LabVIEW RTE: a new project with a constant of the Application in an empty vi directory will return an error 7 - file not found, but still return the correct version of LabVIEW in which the project was created.

I did experiment with workarounds for this problem, and I found a.

When I used to get the path of LabVIEW libdir in the ini of the executable file, execution is able to load and inspect the project file.

LIBDIR = 'C:\Program NIUninstaller Instruments\LabVIEW 2013'

While it is expected that a stand-alone executable can be placed on a system that does not have the LabVIEW IDE, it is still surprising to me that the execution engine cannot find standard library of LabVIEW without some explicit guidance. What other factors contribute to this behavior?

References:

Configuration of LabVIEW files and paths- http://labviewwiki.org/LabVIEW_configuration_file/Paths

Cannot open the attachment in gmail using my iPad PDF... just send me print options

Similar Questions

Maybe you are looking for