Cannot open the attachment xls

Similar Questions

• Cannot open the attachment in yahoo... says the file is used by another program... trying to open Microsoft Picture It!

  Cannot open the attachment in yahoo... says the file is used by another program... trying to open Microsoft Picture It!

  Minnie3,

  You may need to change the default program that opens the images.
  Take a look at the following link for more information: http://windows.microsoft.com/en-us/windows-vista/Change-which-programs-Windows-uses-by-default
  Hope that helps!

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot open the attachment sent with Outlook Express

  I have Windows XP.  I use my processor Works 8.  He worked for many years, suddenly it doesn't.  When I create and send a document using Outlook Express, the receiptant cannot open it.  It is the standard verbiage that works may not support, the file can be used by another application, etc. After much frustration, I find now that if the document is sent attached to Outlook Express cannot be opened from the accessory, it can be opened if the receiptant saves the attachment to its documents and open it from there (which becomes tedious).  I have now discovered that if I send the document as an attachment by using a free email program from Yahoo (Rocketmail) it can be opened from the attachment.  The problem seems to imply of Outlook Express.  Any suggestion would be appreciated.

  Take a look at this also:

  http://answers.Microsoft.com/en-us/IE/Forum/IE8-windows_other/email-attachment-will-not-open-even-though-created/8177e53b-8095-4B02-a47e-95903b3873e6

• Cannot open the attachment

  What should I do to be able to open an e = Power Point e-mail attachment marked PPTX?

  Hello

  You need Microsoft PowerPoint, PowerPoint Viewer or a compatible program like OpenOffice.

  Microsoft PowerPoint - trade program
  http://Office.Microsoft.com/en-us/PowerPoint/FX100487761033.aspx

  MicroSoft Office viewers - free
  http://Office.Microsoft.com/en-us/downloads/HA010449811033.aspx

  OpenOffice - free
  http://www.OpenOffice.org/

  Then you must configure as PPS and PPT PPTX (do all)

  Cannot open. Attachments PPS directly from Windows Mail in Windows Vista PPS PPT (DOC & PDF see links)
  http://www.Winhelponline.com/articles/149/1/Unable-to-open-PPS-attachments-directly-from-Windows-mail-in-Windows-Vista.html

  To do the above to use this method to start Regedit.

  Logon as administrator then:

  Start - type in the search box-> Regedit - find top - make a right click on it - RUN AS ADMIN

  --------------------------------------------------

  For the PowerPoint Viewer, you must download and install all 3 of them.

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  PowerPoint Viewer - free
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=048DC840-14E1-467D-8DCA-19D2A8FD7485&displaylang=en

  PowerPoint Viewer SP1 - free
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=e985ed98-5003-4DC1-88ec-3e151e4dc790&displaylang=en

  PowerPoint Viewer SP2 - free
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=A208E535-C639-435D-85DD-5261D3A5F6A5&displaylang=en

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Cannot open the attachment in gmail using my iPad PDF... just send me print options

  I can't open the PDF attachment in Gmail using my Ipad

  Hi anthonybass,

  To open an attachment in Gmail PDF on your iPad, please take a look at the section "opening of Gmail' to the following FAQ document.

  How to open PDFs in Adobe Acrobat Reader for iOS, part 2 (iPad version)

  Please let us know if you have any additional questions.

  Thank you.

• Cannot open the attachment pdf was sent to me on my computer Vista 32. My computer starts to open then nothing

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  You need Adobe Reader to open pdf files.
  Here is the download link: it's a free program.
  http://get.Adobe.com/reader/

  t-4-2

• Cannot open the attachment in Acrobat 9 in Citrix. "A version update to Acrobat is required... »

  How can I fix this error? We could open any pdf until recently in the last days. I don't know if this is because the user has created this doc in a newer version of Acrobat, but the message full error is 'there was an error opening this document. An updated release of Acrobat is required to open this document. »

  Hi civilclerk1,

  It seems the PDF Creator have set the target version higher than that you have installed on your machine.

  You will need to check with the person who actually created these pdf files.

• I just downloaded El Capital 10.11.4 and now cannot open an attachment (Word) in the mail.

  I just downloaded El Capital 10.11.4 and now cannot open an attachment (Word) in the mail.  I tried to click on highlight and trying to save but not luck.

  You have Word? Office 2004 won't work with El Capitan.

  You can save the attachment and then try to open it to see what happens. If it still does not open, try to open Word or Pages or TextEdit and use the command open.

• RTE de LV cannot open the project files that include references .lvlib in dependencies

  I am writing a DLL LabVIEW to inspect the LabVIEW project files, and I noticed that if a project has a .lvlib reference in its dependencies, then the Run-Time Engine is contradictory on whether or not he can find the project file:

  • Project.Open returns error 7 (file not found)
  
  
  • Project.GetFileLVVersion is a success

  Here are some excerpts from my code of G and C engaged in this behavior:

  

     int openStatus = StatusSuccess;
  
     char * projectVersion = createStringWithLength (VersionStringLength);
  
  printf ("Analysis %s\n", pathchaine);
  
     OpenProject (pathchaine & openStatus, projectVersion, VersionStringLength);
  
     printf ("  project written in LabVIEW %s\n", projectVersion);
  If (openStatus is StatusSuccess)
  
     {
  
        printf ("  Open the project file.") \n") ;
  
     }
  
     on the other
  
     {
  
        printf("Error: could not find Project file, or file was not a Project file (Error code %i).\n», openStatus);")
  
     }

  However, when running in the development environment, the two methods are successful.

  Is this a bug, and if so, is it fixed in 2014 of LabVIEW?

  Here's how you can reproduce:

  Prerequisites:

  1. LabVIEW 2013 SP1 32-bit
  
  
  2. ConEmu for a good console- https://code.google.com/p/conemu-maximus5/wiki/Downloads
  
  
  3. minGW for compilation of a program to use the LabVIEW - http://sourceforge.net/projects/mingw/files DLL

  reference .lvlib to break dependencies Project.Open in LV RTE

  1. Open the attachment in a temporary directory (e.g. c:\xtra\temp)
  
  
  2. Open "OpenProject.lvproj" in LabVIEW.
  
  
  3. Build 'Open library project'.
  
  
  4. ConEmu with a bash command prompt, navigate to the temporary directory.
  
  
  5. Type make
  
  

  $ make
  
  patch the file "builds/platdefines.h.
  
  GCC - std = c99 g OpenProject.c o OpenProject.exe - lOpenProject - Lbuilds

  
  

  6. type "c:\xtra\temp\OpenProject.lvproj" OpenProject

  OpenProject $ 'c:\xtra\temp\OpenProject.lvproj '.
  
  Analysis c:\xtra\temp\OpenProject.lvproj
  
    Project written in LabVIEW 13.0
  
    Open the project file.

  
  

  7. the opinion that both call nodes execute correctly.

  8. type "c:\xtra\temp\OpenProjectWithLvlibDep.lvproj" OpenProject

  OpenProject $ 'c:\xtra\temp\OpenProjectWithLvlibDep.lvproj '.
  
  Analysis c:\xtra\temp\OpenProjectWithLvlibDep.lvproj
  
    Project written in LabVIEW 13.0
  
  Error: Could not find the project file or file was not a project file (error code 7).

  
  

  9. notice that the node version managed while the open failure.

  10 type diff OpenProject.lvproj OpenProjectWithLvlibDep.lvproj

  $ diff-u OpenProject.lvproj OpenProjectWithLvlibDep.lvproj
  
  -OpenProject.lvproj  kills Nov  4 11:28:28 2014
  
  +++ OpenProjectWithLvlibDep.lvproj      kills Nov  4 11:32:37 2014
  
  @@-13,7 + 13.11 @.
  
         true
  
         fake
  
         
  
  -      
  
  +      
  
  +          
  
  +              
  
  +          
  
  +      
  
         
  
            
  
               true

  Here's another way to trigger this behavior, which shows that LabVIEW occasionally Range the element dependencies:

  1. Open "OpenProject.lvproj" in LabVIEW.
  
  
• Add to the project a new VI and place the constant path of file "Application Directory" his block diagram.


• Select ""leader "Save All (this project)" and use the default name for the new VI.


• Type 'c:\xtra\temp\OpenProject.lvproj' OpenProject


• Notice that there is a mistake once again, as is expected.


• Remove the "Application Directory" path of file constant


• Select ""leader "Save All (this project)"


• Type 'c:\xtra\temp\OpenProject.lvproj' OpenProject


• Note that the problem has disappeared, as is expected.


• Add the "Application Directory" path of file constant in the block diagram.


• Select ""leader "Save All (this project)"


• Type 'c:\xtra\temp\OpenProject.lvproj' OpenProject


• Notice there is no problem, which is surprising, because that there should be a mistake because the dependencies item was not tidy.


• Close the new VI and pull out of the project.


• Select ""leader "Save All (this project)"


• Open "OpenProject.lvproj" in a text editor.


• Note that the dependencies item was put away.


• Add VI back to the project.


• Select ""leader "Save All (this project)"


• Type 'c:\xtra\temp\OpenProject.lvproj' OpenProject


• Notice that there is a mistake once again, as is expected.

NInjaneer_wow wrote:

The same behavior occurs in LabVIEW RTE: a new project with a constant of the Application in an empty vi directory will return an error 7 - file not found, but still return the correct version of LabVIEW in which the project was created.

I did experiment with workarounds for this problem, and I found a.

When I used to get the path of LabVIEW libdir in the ini of the executable file, execution is able to load and inspect the project file.

LIBDIR = 'C:\Program NIUninstaller Instruments\LabVIEW 2013'

While it is expected that a stand-alone executable can be placed on a system that does not have the LabVIEW IDE, it is still surprising to me that the execution engine cannot find standard library of LabVIEW without some explicit guidance. What other factors contribute to this behavior?

References:

• Configuration of LabVIEW files and paths- http://labviewwiki.org/LabVIEW_configuration_file/Paths

• Vision Builder HAVE: (Hex 0xFFFA960C) cannot open the record of inspection.

  I HAV built an inspection in the generator of vision for automated inspection (the code, the image and inspection is provided in the attachment)
  but my program cannot open the inspection is to launch an error: error-354804 occurred in VBAI Interface - open Inspection.vi.

  I am using the NI 1742 smart camera and run the program on the remote target

  I don't get the reason for this error.

  If smbdy can solve... Please...

  I think the problem is that the path you specify is invalid for a goal of RT. On the RT, the 'path' should just be the name of the inspection. If you look at help for the VI open Inspection, it says to use the get target Inpections VI to see what paths for all controls are... sometimes the path is a name of numbers subsequent, though it may not be what you think.

  Hope this helps,

  Brad

• Cannot open email attachment .pps

  I can't open the attachment.  .pps exe Message says this file cannot be opened it doesn't have a program associated with it

  http://www.Winhelponline.com/blog/unable-to-open-PPS-ppt-from-Windows-mail-or-WLM/

  When you open one. PPS or. PPT file as an attachment in Windows Mail or Windows Live Mail, you can see the Open / Cancel dialog box. When you select open, the following error message may appear. This can happen even if you have the viewer PowerPoint 2003 or 2007 installed. However, the same file may open correctly when saved to disk and then seen. Note that this problem will not occur if you haveMicrosoft Office or PowerPoint installed.

  [Error message]

  This file does not have a program associated with it for performing this action. Create an association in the set Associations control panel.

  Read the above.

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=048dc840-14e1-467D-8dca-19d2a8fd7485&displaylang=en

  PowerPoint 2007 Viewer

  Microsoft Office PowerPoint 2007 Viewer allows you to view the presentations of all the features created in PowerPoint 97 and later versions.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  And here is a link to a free package of Office Automation:

  http://www.OpenOffice.org/

  How to set file Associations:

  http://articles.TechRepublic.com.com/5100-10878_11-6172036.html

  How do I... Change file extension associations in Windows Vista?

  See you soon.

  See you soon.

  Mick Murphy - Microsoft partner

• Cannot open the e-mail from Adobe Acrobat application

  First of all, let me say that was exceptionally difficult to find somewhere I might actually post. I don't think it should be that hard, either I've missed the easy way. Eitherway, let me know if this is in the wrong place, because I am posting this now that I finally found somewhere I can actually post.

  I use adobe acrobat X standard v10.1.2 (I think, should be fully updated without worrying) on windows 7 pro - x 32. I can open a pdf file and then click on the envelope to send by e-mail, and it brings up a side panel. When I tell the email attachment, it seems that if she does something and then disappears without notice. I tried as admin and same result, I troubleshoot compatibility and it came with xp sp2 and when I did, it says "cannot open the e-mail software" and when I run in administrator mode and xp mode it says always 'impossible to open the email software' on other computers it would be perfectly fine without a hitch, even if they are 64-bit could this be the cause? Also already tried to reinstall Acrobat and it did not help and tried to do a "repair" and that did not help either. So I'm really at a lost, unable to find any documentation on this error if were just troubleshooting using my typical procedures. I hope someone can help out me.

  Thank you

  HannersR

  You are most likely in a problem with Win7 email client number. I'm not sure about AAX, but for older versions, the e-mail was through the interface MAPI Ms. Most of the time you simply make sure that your default e-mail client is specified in the default Windows programs. For some clients, you must enable their ability to use MAPI.

  Not sure if this will help, but it is typically a Windows problem to solve because of the way Acrobat trys to interact with mail.

• Cannot open the application "Mail" because PowerPC applications are no longer supported

  I work on a MacBook Pro mid 2012

  Intel Core i5 2.5 GHz

  OS X El Capitan 10.11.6

  The Mail app suddenly quit and when I tried to resume, I got this message

  "Cannot open the application"Mail"because the PowerPC applications are no longer supported."

  This also happens with the "Maps" app

  All Mac software are up to date, but "Mail" has been working fine since my last update that was awhile ago.

  I am confused to say the least. Suggestions? Thank you!

  If you do a Get Info (command - I) on Mail and Maps applications, what version numbers do you see?

  Try a reboot.

  Make a backup using Time Machine or a cloning program, to ensure that data files can be recovered. Two backups are better than one.

  Try to set up another admin user account to see if the same problem persists. If back to my Mac is enabled in system preferences, the guest account will not work. The intention is to see if it is specific to an account or a system wide problem. This account can be deleted later.

  Isolate a problem by using a different user account

  If the problem is still there, try to start safe mode using your usual account.  Disconnect all devices except those necessary for the test. Shut down the computer and then put it up after a 10 second wait. Immediately after hearing the startup chime, hold down the SHIFT key and continue to hold it until the gray Apple icon and a progress bar appear. Startup is considerably slower than normal. This will reset some caches, forces a check for directory and disables all start-up and connection, among other things. When you restart normally, the initial restart may be slower than normal. If the system is operating normally, there may be 3rd party applications that pose a problem. Try to delete/disable the third-party applications after a reboot using the UN-Installer. For each disable/remove, you need to restart if you do them all at once.

  Safe mode - on El Capitan

  Start Mode without failure-El Capitan.

• ID but cannot open the phone

  معرف ولكن لا يمكن فتح الهاتف

  I know that ID but cannot open the phone

• Cannot open the application "Adobe Installer" because PowerPC applications are no longer supported.

  I'm trying to install Adobe Creative Suite 2 Premium on my MacBook Pro (OS X El Capitan).  When I click on the install icon, I get the following message: cannot open the application "Adobe Installer" because PowerPC applications are no longer supported.  Can I do to solve this problem?

  Try to install mode without failure. Hold the SHIFT key while rebooting.