Cannot open the com security

Similar Questions

• Cannot open the Windows Security Center, nor what I can turn Windows Defender

  Whenever I try to open the Windows Security Center, I always get the same error message "The Security Center Service does not start. Evreytime I try to activate Windows Defender, I get the error "Defander Windows is disabled by group policy"

  I've tried everything I can think of and nothing works. ALSO when I try to delete a file of 50% of the time that I get the message that it requires an Administrative authorization, so I click and give permision, drunk, then when I try again to delete the file, I get the same message, that it requires an administrative authorization.

  He this maybe an a glich error, or is it because my computer is a HP Compaq and ALL settings constantly kkeps change on me no matter what I do.

  I am running WIndows Vista Home Premium

  Hello

  You should try the following steps:

  • Manually start the Security Center Service

  Click Start, click Run, type "services.msc". Scroll down and double-click Security Center. Set starts off in automatic. Click on 'start. Restart your computer and check if it is running.

  • Manually launch the .exe

  Right click and "run as Administrator" on C:\Program Files\Windows Defender\MSASCui.exe

  • Registry

  Look for the value DisableAntiSpyware at:

  HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows Defender and delete who appreciate, but make a backup first.

  • Make sure you have a file named "wscui.cpl" in the Windows\system32 folder. If so, try to start, if not, you can copy it from another PC.
  • http://support.Microsoft.com/kb/927367/en-us

  Perhaps all this steps work for you.

• Cannot open the com files and executable file in the Original Windows Vista Software activated after updates to the registry and cleaning, error message and all the setup.exe files has been disabled, why?

  I use Vista Ultimate SP2 preloaded o/s and windows is activated with a genuine problems with executable files with product of what ID 89580-OEM-7332132-00031 on PC, the problem happens when I'm uninstalling some registry tools, the error message I got was 'impossible to connect to the microsoft client group policy server' and whenever I try to run the executable file .exe or .com I get error messages "the windows don't. not find the environment option that was entered path c:\windows\system32\msconfig.exe for example. What is your solution if all the drivers I downloaded from microsoft Update site and support Web is unexecutable because of registry files missing that causes all the executable files and com files to display error messages when clicked. What was missing in the original windows registry files after running the tool registry optimizer? What was missing in my windows vista original? Need help 4th level or windows file recovery software onwer.

  I was able to surf the internet, able to do facebooking, capable of voip webcam and chat however installation and admin work on operating system software has been disabled due to lack of the registry files all the executable files was disabled after a registry cleaning registry optimizer and all the setup.exe has been disabled when I run saying them I don't have permission to run setup.exe because I like not connected to the microsoft Group Policy Server, but it is an original windows software, I can download files from the microsoft Web site and save on my drive hard but cannot run the executable installation files, which was lacking in system files that stopped all the executable files to run, except the internet broadband. Need help 4th level or windows file recovery software onwer

  Hello

  Method 1:

  I suggest you to do a scan of the SFC. File system (CFS) Auditor verifies that all Windows 7 system files are where they should be as they are by default and not corrupted, changed or damaged.

  a. Click Start, click principally made programs, accessories, right-click on command prompt and select run as administrator.

  b. click on continue or provide administrator credentials if prompted.

  c. in the type in the following command prompt window and press ENTER:

  d. sfc/scannow

  e. you should see the following message on the screen:

  § Begin the analysis of the system. This process will take time.

  § Beginning verification phase of system scan.

  f. % verification complete.

  g. once the scan is complete, a test to see if the problem you are experiencing is resolved or not.

  For more information, see the article mentioned below.

  http://support.Microsoft.com/kb/929833

  Method 2:

  Create a new account user has administrator rights and check if you are able to install applications or not. Follow the steps mentioned in the article below.

  Create a user account

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  Method 3:

  I suggest you do a system restore and check. See the article mentioned below

  System Restore: frequently asked questions.

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  What is system restore?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Cannot open the windows store, a message comes on that I'm not on the internet, or it has expired.

  Original title: 8.0 to 8.1

  Cannot open the windows of my new computer store. I'm now 22 things that are in the box in the store. Whenever I try to open the store, a message lights up, that I am either not on the internet, or it has expired. I don't know what to do. Thank you

  (1) try to reset the cache to the Store: right click on the Windows icon at the bottom left, click Run, type wsreset.exe, enter

  (2) run the troubleshooter App: http://windows.microsoft.com/en-US/windows-8/what-troubleshoot-problems-app

  (3) (3) partir go to a command prompt (Administrator), run the following commands

  (1) sfc/scannow, enter. Restart your computer

  (2) Dism.exe / Online/Cleanup-Image /ScanHealth

  (3) Dism.exe/online /Cleanup - /RestoreHealth Image, restart, and then try to open the store

  (4) re - run sfc/scannow then restart if necessary

  Hope this helps and if you need any additional aid station and we will be happy to help you.

  The above opinion is mine and mine nothing and does not necessarily reflect that of Microsoft, it's employees, or any other Member of this forum.

  "When we try to take anything by itself, we find it hitched to everything else in the universe."-John Muir

  If this has answered your message please mark as answer

• Cannot open the hard disk C: and D:, or no matter what follder on them by double-clicking

  After download cannot open the hard disk C: and D: Internet Explorer 9 windows updates or no matter what follder on them by clicking twice and I opened by right clicking and open.  So I have to use him created restore point Internet explorer 9 and return to internet explorer 8 and the previous record and the problem is solved. How I overcome this problem?

  Babis

  This can be a symptom of malware on your system. Take a look at the guides below for advice in conclusion/remove the malware from your system:
  http://www.Microsoft.com/security/PC-security/browser-hijacking.aspx

  Also: http://answers.microsoft.com/en-us/ie/forum/ie8-windows_other/my-internet-explorer-has-been-hijacked-by-a-virus/f26f7291-d646-4870-864e-a31976df0011

• IE cannot open the operation of the website abandoned when I try to log on to Facebook

  I have windows vista and when I log on facebook IE says that it cannot open the operation of the website abandoned. Why does do that

  Hello

  ·         What Web browser do you use?

  ·         This problem is limited to Facebook?

  The article says that the problem does not occur in Internet Explorer 8 and provided also for Internet Explorer 7 troubleshooting steps.

  http://support.Microsoft.com/kb/927917

  You can also follow the steps/methods of the link below and check if the problem persists.
  
  You receive an error message in Internet Explorer: "Internet Explorer cannot display the webpage".

  Note:

  Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

• recover my system. used to install Windows Vista. get the message cannot open the file E:\Sources\Install.wim. Also the code error 0 x 80070002

  So all this started because I tried to clean my computer to give to a friend. I tried refomatting the hard drive, but something was wrong here. After that, when I turn on the computer I get a black screen with message Bootmgr missing. I read a little inside and saw that I could download a Windows Vista recovery disk because my computer did not come with one.
  After that I downloaded and burned the ISO image to a CD, things started looking better. I got to the screen when you select the language and keyboard. Then install windows screen. My options there were 'Install now' and 'repair your computer '. When I try to install, I put in my product key that seems fine. The next message I get is "Windows cannot open the required file E:\Sources\Install.wim. The file does not exist. Make sure all files required for installation are available, and restart the installation. "Error code: 0 x 80070002.
  When I try to repair, he said "select an operating system to repair, and then click Next."
  Operating System: Windows Vista (TM) Home Basic (recovered)
  Partition Size: 34318 MB
  Location: (D :) ACER
  If you do not see your operating system listed, click on load drivers to load the drivers for your hard drives. I try to select Windows Vista retrieved and clicked Next, but what is said "this version of system recovery options is not compatible with the version of windows that you want to repair" or get a recovery of tools such as repair system, System Restore, complete pc windows, tool windows and command promy memory diagnostic restoration. the only problem is he says operatins system: (unknown) unknown local disk...

  Any help would be appreciated. Really want to give my friend a laptop that wont even turn on. Laughing out loud

  Was it Neosmart?

  This isn't an installation disc. It's a record of startup repair!
  You use the repair disk option, not Install.

  How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.

  There is no Vista free download legal available.

  https://secure.TX.Acer.com/rcdb/main.aspx?brand=Acer

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11; Acer is in some models Alt + F10 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Ask them if you can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon. Mick Murphy - Microsoft partner

• Cannot open Device Manager or services.msc a message box pops up it says "MMc cannot open the file C:\Windows\system32\devmgmt.msc.

  Original title: I can't connect to my wireless network. My convenience store does not work and I can't open the network and sharing Center. I'm sure it's some type of virus. Help, please.
  It says "an unexpected error has occurred. The Troubleshooting Wizard can not continue. "When I try to run the troubleshooter.

  When I try to open Device Manager or services.msc a message box appears, it says "MMc cannot open the file C:\Windows\system32\devmgmt.msc.

  He said also my Defender pro subscription has expired, even if I've just recently added a one year subscription.

  Hello

  You did changes to the computer before the show?

  Method 1:
  Try these steps and check if it solves the problem:
  a. click Start, type cmd, right click and select run as administrator.

  b. at the command prompt, type regsvr32 msxml3.dll , and then press ENTER.

  Method 2:
  Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  Method 3:
  Run a Microsoft security scanner to make sure that the computer is free from virus infection:
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  WARNING:
  If you run the antivirus program that is infected by the virus scan will get deleted. Therefore, reinstall the program. Also if the files and folders are affected by the virus, while they might even get deleted

  See the steps in the link and check.

  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• Cannot open the filter request mission shared services

  Cannot open the filter request mission shared services, and this applies to all applications in a 9.3 production environment.
  
  It says "See the Guide Security to configure the security permissions for this application."
  
  And this message is displayed in a tab of HSS named 'built-in Apps.
  
  
  
  Can Essbase suddenly pass from the SSP in native mode security mode? What is the cause?
  
  Published by: Markus on August 9, 2011 01:23

  Have you tried the reinstatement of one of applications with shared services, go to the INJURED, do a right-click on the application and select Register.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Satellite A300-M01 - fingerprint - cannot open the sensor with Win XP

  Hello

  I got a Satellite A300-M01 with Windows Vista but my my software is very slow, so I'm a Windows XP Installer to put in. After that, the fingerprint reader no longer works the registration of fingerprints he'll only say 'Cannot open the sensor' and if you access the service of this device it says "specified device instance handle does not match this device."

  I already downloaded the driver for this sensor of isd.toshiba.com.au, but after the installation, the problem is the same. Any info is much appreciated.

  Thank you.

  Ray

  Hello!

  Have you installed the tools and all the other drivers of Toshiba?

  Search on the Toshiba site for a BIOS update.
  Maybe this can solve the problem.

  Good bye

• 9.1 Safari cannot open the page after el capitan 10.11.4 updated updated

  have an imac (retina 5 k, 27 ", end of 2014)

  4 GHz of processor intel core i7

  8 GB 1600 Mhz DDR3

  1 TB of flash storage

  running Safari 9.1 (11601.5.17.1)

  Safari opens but does not open the page - get - Safari cannot open the page - safari can't open the page because the server dropped the connection unexpectedly.

  Journal of the console after repeated attempts-

  

  appreciated all help to solve them.

  Go step by step and test.

  1. turn off the power to the router. Unplug it from the wall. Wait a while.

  Plug it in, back to the wall. Turn on the router. Wait for all lights are light up properly. It will take a while.

  Restart the computer.

  Boot mode safe.

  https://support.Apple.com/kb/PH18760?locale=en_US

  2 remove Caches.db

  Close all windows and close all applications.

  Hold down the 'option' key, then click on the "Go" menu in the Finder menu bar.

  Select 'Library' in the menu dropdown.

  Library > Caches > com.apple.Safari > Caches.db

  Right-click on the Caches.db file and select "move to trash".

  Close the windows.

  Restart and restart Safari.

  3 empty Caches

  Safari > Preferences > advanced

  Tick the box "Show develop menu in menu bar."

  Develop menu will appear in the Safari menu bar.

  Click on develop and select 'Empty cache' in the menu dropdown.

  4. remove the Cookies

  Safari > Preferences > privacy > Cookies and other data from the website:

  Click on the button "Details".

  Delete all cookies except those from Apple, your internet service provider and the banks.

  5 Disable Extensions and test them.

  Safari > Preferences > Extensions

  Uncheck 'Enable the Extension' and test.

  Enable the Extensions one by one and test.

  To uninstall any extension, select it and click the "Uninstall" button

• I may have inadvertently downloaded Firefox 5 instead of 4 and cannot open the application because it is not supported. Can I still download Firefox 4, which I was planning to do?

  I tried to update to Firefox 3 Firefox 4. But, after completing the download and then tried to open the Firefox application, I got a message saying: "Cannot open the application"Firefox"because it is not supported on this architecture." Is it possible that I may have inadvertently downloaded Firefox 5? I do not think that my system support
  Firefox 5. I'm not a geek, so I really appreciated any help you can give me. Thank you.

  • Versions of Firefox 4 and later do not run a Mac PowerPC.
  • Firefox 4 and later requires at least OS X 10.5 and an Intel Mac.
  • http://www.Mozilla.com/Firefox/5.0/system-requirements/

  For a non-official Firefox 4 compatible version (TenFourFox) which works on Mac PowerPC with OS X 10.4.11 or OS X 10.5.8, you can consult:

  • http://www.floodgap.com/software/tenfourfox/

  Firefox 3.6.x (Mac OS X 10.4 and later versions) can be found here:

  • http://www.Mozilla.com/en-us/Firefox/all-older.html

• iPod touch will not got to some Web sites - "Safari cannot open the page because the network connection has been lost."

  Safari refuses to go to certain websites (facebook.com, youtube.com) on my iPod Touch and instead displays this error:

  S afari cannot open the page because the network connection has been lost.

  The bubble at the top where I typed in the URL doesn't change, it always says "facebook.com" or something else.

  No matter where I am, so it won't get fixed by resetting my home Wi - Fi router. Other sites load fine. I have reset the iPod, too, by pressing the sleep button and one on the front (whatever it's called) until I see the apple logo. I also did 'Story clear and data Web site' in the Safari settings.

  I searched the web and found a number of threads that start with similar complaints, but I can't find one where the problem has been resolved in fact.

  Thank you!

  Not "no matter where I am," means, it happens with all networks?

  If so:

  Try:

  -Reset the device iOS. Nothing will be lost

  Device iOS Reset: Hold down the On / Off button and the Home button at the same time for to

  ten seconds, until the Apple logo appears.

  -Reset all settings

  Go to settings > general > Reset and tap reset all settings.

  All your preferences and settings are reset. Information (such as your contacts and calendars) and media (such as songs and videos) are not affected.

  -Restore from backup. See:

  Restore your device from an iCloud or iTunes backup - Apple Support

  -Restore factory settings/new iOS device.

  If still problem, make an appointment at an Apple store Genius Bar because it appears that you have a hardware problem.

  Shop Apple Store - Genius Bar

• Help! MicrosoftOffice 2011 cannot open the files after the recent update

  After the recent update (security 2015-006, Mac OS 10.10.5, Yosemite), I can longer open all files in Microsoft Excel or Word.

  When I tried to open the files in the "Open recent" list, Excel reports "Excel cannot open the workbook. The file name or path contains invalid characters (for example, /). "Same error message appears when I go into the folder and open the file in Excel.

  When I tried to open an existing file of the word, he pointed out that "this is not a valid file name.

  PS: Please do not suggest you use everything as your other favorite programs.

  Click the folder just below the recent and see if documents are on my Mac. Additionally, click on a reader-Documents-then the file name and see if the same thing happens. I downloaded the update of security on the App Store and have no problem. Also, in your menu bar, go to help in the Office applications and updates. An Office 2016 update was released last Friday, December 11.

• lack of PIDOCOB6.dll cannot open the program

  lack of PIDOCOB6.dll cannot open the program of old software from microsoft for photos

  lack of PIDOCOB6.dll cannot open the program of old software from microsoft for photos

  =========================================
  The article Microsoft Knowledge Base that address the
  Question of PIDOCOB6.dll are no longer available, but I think
  the fix was to uninstall/reinstall Picture It!.

  Also... the error could be related to a printer driver... If you
  recently installed a new printer or your printer driver update
  It is maybe at fault.

  Sorry that's all I have on the subject.

  There is a Picture It! Group on Yahoo Groups... maybe
  could someone offer a few ideas:

  A_Picture_It_Help · Creative with Picture It & SOAK!
  http://tech.groups.Yahoo.com/group/A_Picture_It_Help/