Cannot open the HFM (grayed out menu items) in the workspace (weblogic\IIS)

Similar Questions

• After upgrading to Snow Leopard 10.6.5 most of the files does not open in CS3 Rosetta, grayed out menu items

  After upgrading to Snow Leopard 10.6.5 most of the files will not open in CS3 and more menu items are gray,

  like "Photoshop" and "quit Photoshop. I have to force it to quit. Don't know what version of CS3 since 'about this Mac' is not available.

  But CS3 runs in mode of "Rosetta". I had done this years ago, my scanner would work.

  I don't remember how I managed to do run in Rosetta and don't know how to do so he could operate normally, if necessary.

  Change the name of the file or the plugin to have ~ as first character will prevent it to be loaded.

• Photoshop CS3 10.0.1 - launch crashes on the registration screen, all grayed out menu items

  I use Adobe Photoshop CS3 10.0.1.

  At the launch, opens the window marked "Adobe Design Suite Premium CS3" - it is only filled with white and no text or graphics (I think that's usually the window asking me if I want to register, which always comes back when I run the program (rather annoying in itself).  However, it seems now that the launch is "interferes" in this window, like, even the program starts, all the menus are dimmed, and I can't open any files or anything.  Also, the above window has only the 'reduce' yellow button available at the top left, so I cannot close or otherwise get rid of it.  Since even the Quit function is grayed out, I have to leave the program with a force quit.  In addition, this same thing happens in my other CS3 programs (In Design) as well.

  I tried trashing the plist of photoshop (com.adobe.photoshop.plist) and also the file com.adobe.118.registration, which had no effect.

  Can any advice on how I fix?

  Thank you!

  I hope that this solution will work for you:

  http://forums.Adobe.com/thread/1339100?TSTART=30

• Please God. turn off this product. Your help desk services do not work, cannot turn off. I use the retail SECTOR, xi of adobe acrobat. Connected to the internet. On more than 20 min. open for disable grayed out. Windows 7 pro x 64. This shit makes people

  Please God. turn off this product. Your help desk services do not work, cannot turn off. I use the retail SECTOR, xi of adobe acrobat. Connected to the internet. On more than 20 min. open for disable grayed out. Windows 7 pro x 64. This shit makes people use fraud. I just want what it OFF can be USED on another COMPUTER.

  can anyone in the customer support to disable this?

  Hello Terry,

  I checked the serial number and found that you have enough number of activations left to install on 2 computers.

  Please uninstall the software and activate it on another machine. In case of problems please let me know and I'll help you.

  My direct email: [email protected]

  Chat Support email:

  http://helpx.Adobe.com/x-productkb/global/Service1.html

  Kind regards

  Rave

• Downloaded Acrobat Reader - Widows 7 OS.  Adobe has taken over several of my desktop/start menu icons.   Adobe, I cannot open the original programs.

  Downloaded Acrobat Reader - Widows 7 OS.  Adobe has taken over several of my desktop/start menu icons.   Adobe, I cannot open the original programs.

  This can be useful: Application, file icons change in Acrobat/Reader icon

• cannot open the item for creating adobe 11 on my MacBook Pro? that I buy it from the App Store? Help, please

  cannot open the item for creating adobe 11 on my MacBook Pro? that I buy it from the App Store? Help, please

  its said that its currently not available

  I have so much work account on this program, please help

  Make sure that your computer meets the requirements for the software you have purchased.  If this isn't the case, you will need to see about getting a refund.

  If she does not meet requirements, you must talk to the seller your issue with the product that they have you sold.

• Help! MicrosoftOffice 2011 cannot open the files after the recent update

  After the recent update (security 2015-006, Mac OS 10.10.5, Yosemite), I can longer open all files in Microsoft Excel or Word.

  When I tried to open the files in the "Open recent" list, Excel reports "Excel cannot open the workbook. The file name or path contains invalid characters (for example, /). "Same error message appears when I go into the folder and open the file in Excel.

  When I tried to open an existing file of the word, he pointed out that "this is not a valid file name.

  PS: Please do not suggest you use everything as your other favorite programs.

  Click the folder just below the recent and see if documents are on my Mac. Additionally, click on a reader-Documents-then the file name and see if the same thing happens. I downloaded the update of security on the App Store and have no problem. Also, in your menu bar, go to help in the Office applications and updates. An Office 2016 update was released last Friday, December 11.

• recover my system. used to install Windows Vista. get the message cannot open the file E:\Sources\Install.wim. Also the code error 0 x 80070002

  So all this started because I tried to clean my computer to give to a friend. I tried refomatting the hard drive, but something was wrong here. After that, when I turn on the computer I get a black screen with message Bootmgr missing. I read a little inside and saw that I could download a Windows Vista recovery disk because my computer did not come with one.
  After that I downloaded and burned the ISO image to a CD, things started looking better. I got to the screen when you select the language and keyboard. Then install windows screen. My options there were 'Install now' and 'repair your computer '. When I try to install, I put in my product key that seems fine. The next message I get is "Windows cannot open the required file E:\Sources\Install.wim. The file does not exist. Make sure all files required for installation are available, and restart the installation. "Error code: 0 x 80070002.
  When I try to repair, he said "select an operating system to repair, and then click Next."
  Operating System: Windows Vista (TM) Home Basic (recovered)
  Partition Size: 34318 MB
  Location: (D :) ACER
  If you do not see your operating system listed, click on load drivers to load the drivers for your hard drives. I try to select Windows Vista retrieved and clicked Next, but what is said "this version of system recovery options is not compatible with the version of windows that you want to repair" or get a recovery of tools such as repair system, System Restore, complete pc windows, tool windows and command promy memory diagnostic restoration. the only problem is he says operatins system: (unknown) unknown local disk...

  Any help would be appreciated. Really want to give my friend a laptop that wont even turn on. Laughing out loud

  Was it Neosmart?

  This isn't an installation disc. It's a record of startup repair!
  You use the repair disk option, not Install.

  How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.

  There is no Vista free download legal available.

  https://secure.TX.Acer.com/rcdb/main.aspx?brand=Acer

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11; Acer is in some models Alt + F10 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Ask them if you can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon. Mick Murphy - Microsoft partner

• Cannot open the application "Mail" because PowerPC applications are no longer supported

  I work on a MacBook Pro mid 2012

  Intel Core i5 2.5 GHz

  OS X El Capitan 10.11.6

  The Mail app suddenly quit and when I tried to resume, I got this message

  "Cannot open the application"Mail"because the PowerPC applications are no longer supported."

  This also happens with the "Maps" app

  All Mac software are up to date, but "Mail" has been working fine since my last update that was awhile ago.

  I am confused to say the least. Suggestions? Thank you!

  If you do a Get Info (command - I) on Mail and Maps applications, what version numbers do you see?

  Try a reboot.

  Make a backup using Time Machine or a cloning program, to ensure that data files can be recovered. Two backups are better than one.

  Try to set up another admin user account to see if the same problem persists. If back to my Mac is enabled in system preferences, the guest account will not work. The intention is to see if it is specific to an account or a system wide problem. This account can be deleted later.

  Isolate a problem by using a different user account

  If the problem is still there, try to start safe mode using your usual account.  Disconnect all devices except those necessary for the test. Shut down the computer and then put it up after a 10 second wait. Immediately after hearing the startup chime, hold down the SHIFT key and continue to hold it until the gray Apple icon and a progress bar appear. Startup is considerably slower than normal. This will reset some caches, forces a check for directory and disables all start-up and connection, among other things. When you restart normally, the initial restart may be slower than normal. If the system is operating normally, there may be 3rd party applications that pose a problem. Try to delete/disable the third-party applications after a reboot using the UN-Installer. For each disable/remove, you need to restart if you do them all at once.

  Safe mode - on El Capitan

  Start Mode without failure-El Capitan.

• 9.1 Safari cannot open the page after el capitan 10.11.4 updated updated

  have an imac (retina 5 k, 27 ", end of 2014)

  4 GHz of processor intel core i7

  8 GB 1600 Mhz DDR3

  1 TB of flash storage

  running Safari 9.1 (11601.5.17.1)

  Safari opens but does not open the page - get - Safari cannot open the page - safari can't open the page because the server dropped the connection unexpectedly.

  Journal of the console after repeated attempts-

  

  appreciated all help to solve them.

  Go step by step and test.

  1. turn off the power to the router. Unplug it from the wall. Wait a while.

  Plug it in, back to the wall. Turn on the router. Wait for all lights are light up properly. It will take a while.

  Restart the computer.

  Boot mode safe.

  https://support.Apple.com/kb/PH18760?locale=en_US

  2 remove Caches.db

  Close all windows and close all applications.

  Hold down the 'option' key, then click on the "Go" menu in the Finder menu bar.

  Select 'Library' in the menu dropdown.

  Library > Caches > com.apple.Safari > Caches.db

  Right-click on the Caches.db file and select "move to trash".

  Close the windows.

  Restart and restart Safari.

  3 empty Caches

  Safari > Preferences > advanced

  Tick the box "Show develop menu in menu bar."

  Develop menu will appear in the Safari menu bar.

  Click on develop and select 'Empty cache' in the menu dropdown.

  4. remove the Cookies

  Safari > Preferences > privacy > Cookies and other data from the website:

  Click on the button "Details".

  Delete all cookies except those from Apple, your internet service provider and the banks.

  5 Disable Extensions and test them.

  Safari > Preferences > Extensions

  Uncheck 'Enable the Extension' and test.

  Enable the Extensions one by one and test.

  To uninstall any extension, select it and click the "Uninstall" button

• Receive "Safari cannot open the page. Too many redirects occurred trying to open google

  On a Mac OS X 10.7, when I try and access google/mail I get the message: "Safari cannot open the page. Too many redirects occurred during open yo... Any ideas?

  In your Safari menu bar, click Safari > Preferences then select the Privacy tab, then click: delete all data Web site

  Then exit then restart Safari to test.

  If you see the same message, the redirects may be due to malicious software.

  You can download here free malware removal utility > https://www.malwarebytes.org/

  Or, if you would rather download MalwareBytes, you follow the instructions in the malware removal manually here > remove the unwanted advertising software that shows ads advertising and graphics on your Mac

• Cannot open the safari link after installing the iOS 9.3

  Cannot open the safari link after installing the iOS 9.3

  This is a common problem and there is currently no permanent solution yet.

  Try turning off JavaScript under settings - Safari - Advanced.

  I think that apple will figure things out soon.

• Get the Error Message When you try to reinstall Vista: Windows cannot open the required file: E:\Sources\install.wim

  I'm trying to reinstall windows vista for the following reasons:

  1. I have SQL Server 2008 installed on my computer.  I deleted some files a long time ago and it screwed something and I couldn't reinstall.
  2. I had partitioned my hard drive for vista half and half SuSE and I deleted who and when I did, I think I deleted another partition - my recovery partition (E:\?).
  3. I need to clean my laptop.

  When I try to start the installation of a disk and I put in my product key, I get the following error:

  Windows cannot open the required file E:\Sources\install.wim.  The file does not exist.  Make suure all files required for installation are available, and restart the installation.  Error code: 0 x 80070002.

  Let me know if you have any ideas how I can fix it.  My next step was to recreate this E directory and download the install.wim file and re start the installation.  I could not find the file install.wim well.

  Rob

  Hi Rob,

  I checked the link you provided.  What you downloaded was just the Vista recovery environment.  You cannot actually re - install Vista with that and if you blew your recovery partition unfortunately you may be out of luck.  You blew your partition containing Vista runs so the SFC will be of no help either.  I wish I had better news for you, but I don't see any way o get on without a Vista DVD.  I have good news for you if.  When you get your HP drive if you have problems with the installation, we will be able to help you with that.

  Take care and let us know if you need assistance when the disc arrives. Locutys of Borg

  Resistance is futile

  If you don't succeed the first time skydiving probably isn't for you!

• WINDOWS cannot OPEN THE FILE D:\Sources\Install.wim REQUIERED. Make sure that all required files for installation aare available and restart the installation. Error code: 0x8007000D,.

  IM TRYING to re - INSTALL WINDOWS VISTA ON MY T-6321 to the front door, BUT WHEN I INSERT THE DISC, AND INSTALL, a MESSAGE APPEARS SAYING: WINDOWS cannot OPEN THE FILE D:\Sources\Install.wim REQUIERED. Make sure that all required files for installation aare available and restart the installation. Error code: 0x8007000D, SHOULD ALL BE ON THE DISCALREADY?

  Hi JRCLNSIN100,

   

  Welcome to Microsoft Answers Forums.

  We would like to get some more information from you to help solve your problem. You better, please answer the following questions.

  ·         What is the disk you use to reinstall?

  ·         Is this a recovery or reinstalling the disc you are using?

  ·         When exactly do you get this error message?

  ·         What is the edition of Windows Vista, you try to install?

  ·         How old is the drive that you are using?

  ·         How are you starting the installation process?

  After researching the error 0x8007000D code is essentially due to file corruption and a problem with the drive itself.

  First check if you have scratches or dust on the disc and clean the surface and try again.

  To check if the disk is wrong, you will need to copy the contents of the DVD to the hard drive and try to install using that.

  To perform a flat installation of Windows Vista, follow these steps.

  Note The hard disk must have at least 3 GB of free space on the disk for the Windows Vista installation files. The hard disk must have at least 15 GB of additional disk space to install Windows Vista. For more information about system requirements for Windows Vista, see the Microsoft Web site at the following address:

  http://www.Microsoft.com/Windows/products/windowsvista/editions/SystemRequirements.mspx

  1. Insert the Windows Vista installation disc.
  2. Start Windows Explorer.
  3. In Windows Explorer, click to select the drive for the Windows Vista installation disc.
  4. On the Edit menu, click select all.
  5. On the Edit menu, click copy.
  6. Click to select the hard disk you want to contain the flat installation files.
  7. On the file menu, point to new, click the folder, type Windows Vista Setupand then press ENTER.
  8. Double-click the Windows Vista Setup program, and then click Paste on the Edit menu.
  9. Double-click Setup.exe, and then follow the instructions that appear.

  See the link below for more information on flat installation.

  How to perform a flat installation of Windows Vista

  http://support.Microsoft.com/kb/928902

  This problem can also occur if the firmware of the DVD drive is defective or obsolete.

  If the step above does not resolve the question suggests that you install the latest drivers for the DVD player on the computer.

  For more information please visit the link below.

  Error message when you try to install Windows Vista by using the DVD drive on the computer: "Windows cannot install required files".

  http://support.Microsoft.com/kb/930984

  Hope this information is useful.

  Let me know if it worked.

  All the best!

  Thanks and greetings

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot open my encrypted Documents? -Cannot open the document: user does not have access privileges

  I am using Window7 and I got some of my encrypted files by opening the properties of the file and selecting the encryption option. I have not had any problems so far, but all of a sudden I can't open my encrypted files. There is an error message indicating "cannot open the document: user does not have access privileges. But I have no other user account on my computer and I am logged in with my administrator profile. I turned off my computer, rebooted and tried various methods, but when I open the file it shows the same message as above. Help, please?

  Hello

  Please follow the steps from the link below.

  Appropriating a file or a folder

  http://TechNet.Microsoft.com/en-us/library/cc753659.aspx

  Also check out the links below.

  Encrypt or decrypt a file or folder

  http://Windows.Microsoft.com/en-us/Windows7/encrypt-or-decrypt-a-folder-or-file

  Recover encrypted files or folders

  http://Windows.Microsoft.com/en-us/Windows7/recover-encrypted-files-or-folders

  Import or export certificates and private keys

  http://Windows.Microsoft.com/en-us/Windows7/import-or-export-certificates-and-private-keys