Cannot open the itunes Installer

Similar Questions

• Cannot open the application "Adobe Installer" because PowerPC applications are no longer supported.

  I'm trying to install Adobe Creative Suite 2 Premium on my MacBook Pro (OS X El Capitan).  When I click on the install icon, I get the following message: cannot open the application "Adobe Installer" because PowerPC applications are no longer supported.  Can I do to solve this problem?

  Try to install mode without failure. Hold the SHIFT key while rebooting.

• Cannot open the application "iTunes" because another user is open.

  I recently bought a new computer with vista. Installed iTunes on this computer and found that there is a problem between the two profiles on the computer. I run iTunes on my profile - but whenever my wife profile is active we are getting consistent error messages indicating "cannot open the application"iTunes"as another user, he has opened." Ask the other user to quit the application and try again.

  I need to keep itunes open in my profile - and anyway, why are they bent them in two profiles in Vista... we never had this problem under XP.
  I asked Apple for advice, and they suggested to install itunes in the second profile... which I did and said to reinstall/repair...which is not the goal... Apple then told me to contact Microsoft support as he would have to do with the admin files...
  Any advice pls.
  Thank you

  Find the Itunes.exe in the Itunes folder in Program Files.  Right click on the .exe / Properties / compatibility, look down at the bottom of this page for the 'privilege level' and check the box that says "change settings for all users.  In the heartbeat window according to the box that says "run this program as an administrator".  This can only solve your problem if you can both run under the same user name.

  When you run a program as an administrator you should get a quick UAC (unless maybe you have turned off UAC?

  To see the file extensions, you may need to go into Control Panel / folder Options / discovers, there you can uncheck "hide known file type.

• WINDOWS cannot OPEN THE FILE D:\Sources\Install.wim REQUIERED. Make sure that all required files for installation aare available and restart the installation. Error code: 0x8007000D,.

  IM TRYING to re - INSTALL WINDOWS VISTA ON MY T-6321 to the front door, BUT WHEN I INSERT THE DISC, AND INSTALL, a MESSAGE APPEARS SAYING: WINDOWS cannot OPEN THE FILE D:\Sources\Install.wim REQUIERED. Make sure that all required files for installation aare available and restart the installation. Error code: 0x8007000D, SHOULD ALL BE ON THE DISCALREADY?

  Hi JRCLNSIN100,

   

  Welcome to Microsoft Answers Forums.

  We would like to get some more information from you to help solve your problem. You better, please answer the following questions.

  ·         What is the disk you use to reinstall?

  ·         Is this a recovery or reinstalling the disc you are using?

  ·         When exactly do you get this error message?

  ·         What is the edition of Windows Vista, you try to install?

  ·         How old is the drive that you are using?

  ·         How are you starting the installation process?

  After researching the error 0x8007000D code is essentially due to file corruption and a problem with the drive itself.

  First check if you have scratches or dust on the disc and clean the surface and try again.

  To check if the disk is wrong, you will need to copy the contents of the DVD to the hard drive and try to install using that.

  To perform a flat installation of Windows Vista, follow these steps.

  Note The hard disk must have at least 3 GB of free space on the disk for the Windows Vista installation files. The hard disk must have at least 15 GB of additional disk space to install Windows Vista. For more information about system requirements for Windows Vista, see the Microsoft Web site at the following address:

  http://www.Microsoft.com/Windows/products/windowsvista/editions/SystemRequirements.mspx

  1. Insert the Windows Vista installation disc.
  2. Start Windows Explorer.
  3. In Windows Explorer, click to select the drive for the Windows Vista installation disc.
  4. On the Edit menu, click select all.
  5. On the Edit menu, click copy.
  6. Click to select the hard disk you want to contain the flat installation files.
  7. On the file menu, point to new, click the folder, type Windows Vista Setupand then press ENTER.
  8. Double-click the Windows Vista Setup program, and then click Paste on the Edit menu.
  9. Double-click Setup.exe, and then follow the instructions that appear.

  See the link below for more information on flat installation.

  How to perform a flat installation of Windows Vista

  http://support.Microsoft.com/kb/928902

  This problem can also occur if the firmware of the DVD drive is defective or obsolete.

  If the step above does not resolve the question suggests that you install the latest drivers for the DVD player on the computer.

  For more information please visit the link below.

  Error message when you try to install Windows Vista by using the DVD drive on the computer: "Windows cannot install required files".

  http://support.Microsoft.com/kb/930984

  Hope this information is useful.

  Let me know if it worked.

  All the best!

  Thanks and greetings

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• WMP opens Itunes M4A but cannot open the WMA to M4A

  ITunes MPEG-4 audio stores on my PC as a file accessible M4A both WMP and Itunes, as well in Windows 7 and Windows 8.

  However, without Itunes installed and the use of usual online converters, Windows cannot open the converted M4A WMA files.

  My first step might be to find a new converter that distinguishes between MPEG-4 and MPEG - 4 Audio video.
  But I'm not sure about this. Advice would be appreciated.

  Is there anywhere, yu Imran?

  Hi Mark,

  I see that you are unable to open the M4A files in Windows Media Player. I'll help you with this problem.

  Windows Media Player cannot play the file (or can't play either the audio or video of the M4A file part) because the required codec is not installed on the computer.

  For more information about codecs, click here: http://windows.microsoft.com/en-us/windows7/Codecs-frequently-asked-questions

  Refer.

  Windows Media Player, frequently asked questions: http://windows.microsoft.com/en-PH/windows7/Windows-Media-Player-frequently-asked-questions

  Let us know if you need assistance with any windows problem. We will be happy to help you.

• After installation first boot failed with the message: cannot open the volume, because the file is locked, you quite accessrights...

  After installation first boot failed with the message: cannot open the volume, because the file is locked, you quite accessrights...

  What can I do?

  Have you tried what he says in the link I provided?

  or

  A chat session where an agent can remotely look inside your computer can help

  Cloud creative support chat (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• I downloaded the Lightroom 4 upgrade and cannot open the installer

  I downloaded the Lightroom 4 upgrade and cannot open the installer

  Ivo,

  There is trouble on the side Microsoft who know us.

  Please refer to the documentation for the same

  http://helpx.Adobe.com/Lightroom/KB/Lightroom-43-doesn ' t-installation - Windows.html

  Florian

• Seagate installs but I can not find and cannot open the unit to see my files

  whenever I installed my seagate freeagent go drive.. initio default controller is the one that pops up saying ready for use, but I can not find and cannot open the unit to see my files, I can see it as (which I think it's maybe) in devices, printers as 'Initro Default Controller.

  The disc may need a drive letter must be attributed. Please try the following link to assign a drive letter to the drive.

  http://Windows.Microsoft.com/en-in/Windows7/change-add-or-remove-a-drive-letter

• Cannot open the application "Mail" because PowerPC applications are no longer supported

  I work on a MacBook Pro mid 2012

  Intel Core i5 2.5 GHz

  OS X El Capitan 10.11.6

  The Mail app suddenly quit and when I tried to resume, I got this message

  "Cannot open the application"Mail"because the PowerPC applications are no longer supported."

  This also happens with the "Maps" app

  All Mac software are up to date, but "Mail" has been working fine since my last update that was awhile ago.

  I am confused to say the least. Suggestions? Thank you!

  If you do a Get Info (command - I) on Mail and Maps applications, what version numbers do you see?

  Try a reboot.

  Make a backup using Time Machine or a cloning program, to ensure that data files can be recovered. Two backups are better than one.

  Try to set up another admin user account to see if the same problem persists. If back to my Mac is enabled in system preferences, the guest account will not work. The intention is to see if it is specific to an account or a system wide problem. This account can be deleted later.

  Isolate a problem by using a different user account

  If the problem is still there, try to start safe mode using your usual account.  Disconnect all devices except those necessary for the test. Shut down the computer and then put it up after a 10 second wait. Immediately after hearing the startup chime, hold down the SHIFT key and continue to hold it until the gray Apple icon and a progress bar appear. Startup is considerably slower than normal. This will reset some caches, forces a check for directory and disables all start-up and connection, among other things. When you restart normally, the initial restart may be slower than normal. If the system is operating normally, there may be 3rd party applications that pose a problem. Try to delete/disable the third-party applications after a reboot using the UN-Installer. For each disable/remove, you need to restart if you do them all at once.

  Safe mode - on El Capitan

  Start Mode without failure-El Capitan.

• Satellite A300-M01 - fingerprint - cannot open the sensor with Win XP

  Hello

  I got a Satellite A300-M01 with Windows Vista but my my software is very slow, so I'm a Windows XP Installer to put in. After that, the fingerprint reader no longer works the registration of fingerprints he'll only say 'Cannot open the sensor' and if you access the service of this device it says "specified device instance handle does not match this device."

  I already downloaded the driver for this sensor of isd.toshiba.com.au, but after the installation, the problem is the same. Any info is much appreciated.

  Thank you.

  Ray

  Hello!

  Have you installed the tools and all the other drivers of Toshiba?

  Search on the Toshiba site for a BIOS update.
  Maybe this can solve the problem.

  Good bye

• iPod touch will not got to some Web sites - "Safari cannot open the page because the network connection has been lost."

  Safari refuses to go to certain websites (facebook.com, youtube.com) on my iPod Touch and instead displays this error:

  S afari cannot open the page because the network connection has been lost.

  The bubble at the top where I typed in the URL doesn't change, it always says "facebook.com" or something else.

  No matter where I am, so it won't get fixed by resetting my home Wi - Fi router. Other sites load fine. I have reset the iPod, too, by pressing the sleep button and one on the front (whatever it's called) until I see the apple logo. I also did 'Story clear and data Web site' in the Safari settings.

  I searched the web and found a number of threads that start with similar complaints, but I can't find one where the problem has been resolved in fact.

  Thank you!

  Not "no matter where I am," means, it happens with all networks?

  If so:

  Try:

  -Reset the device iOS. Nothing will be lost

  Device iOS Reset: Hold down the On / Off button and the Home button at the same time for to

  ten seconds, until the Apple logo appears.

  -Reset all settings

  Go to settings > general > Reset and tap reset all settings.

  All your preferences and settings are reset. Information (such as your contacts and calendars) and media (such as songs and videos) are not affected.

  -Restore from backup. See:

  Restore your device from an iCloud or iTunes backup - Apple Support

  -Restore factory settings/new iOS device.

  If still problem, make an appointment at an Apple store Genius Bar because it appears that you have a hardware problem.

  Shop Apple Store - Genius Bar

• Get the Error Message When you try to reinstall Vista: Windows cannot open the required file: E:\Sources\install.wim

  I'm trying to reinstall windows vista for the following reasons:

  1. I have SQL Server 2008 installed on my computer.  I deleted some files a long time ago and it screwed something and I couldn't reinstall.
  2. I had partitioned my hard drive for vista half and half SuSE and I deleted who and when I did, I think I deleted another partition - my recovery partition (E:\?).
  3. I need to clean my laptop.

  When I try to start the installation of a disk and I put in my product key, I get the following error:

  Windows cannot open the required file E:\Sources\install.wim.  The file does not exist.  Make suure all files required for installation are available, and restart the installation.  Error code: 0 x 80070002.

  Let me know if you have any ideas how I can fix it.  My next step was to recreate this E directory and download the install.wim file and re start the installation.  I could not find the file install.wim well.

  Rob

  Hi Rob,

  I checked the link you provided.  What you downloaded was just the Vista recovery environment.  You cannot actually re - install Vista with that and if you blew your recovery partition unfortunately you may be out of luck.  You blew your partition containing Vista runs so the SFC will be of no help either.  I wish I had better news for you, but I don't see any way o get on without a Vista DVD.  I have good news for you if.  When you get your HP drive if you have problems with the installation, we will be able to help you with that.

  Take care and let us know if you need assistance when the disc arrives. Locutys of Borg

  Resistance is futile

  If you don't succeed the first time skydiving probably isn't for you!

• Try to install the new copy off error vista WINDOWS CANNOT OPEN THE REQUIRED FILE 0x8007000D

  OT: Hey tried down laptop restore none tried to install the new copy off vista prem with no joy only error 0x8007000D WINDOWS can NOT OPEN THE REQUIRED of joy

  Portable Hi down tried restore none tried to install the new copy off vista prem with no joy only error 0x8007000D comes WINDOWS CANNOT OPEN THE REQUIRED FILE of joy

  Hi jamesgillwn,

  1. when exactly you get this error message?
  2. what disc do you use to reinstall?
  3. What is the exact error that appears when you try to start?
  4. at what point of the installation you get the error message?

  After researching the error 0x8007000D code is essentially due to file corruption and a problem with the drive itself.

  First check if you have scratches or dust on the disc and clean the surface and try again.

  To check if the disk is wrong, you will need to copy the contents of the DVD to the hard drive and try to install using that.

  Try the steps from the following link:

  Error message when you try to install Windows Vista by using the DVD drive on the computer: "Windows cannot install required files".

  http://support.Microsoft.com/kb/930984

  Note: When you perform the installation, you will lose the data, make sure that you need to backup your data before you perform the installation.

• recover my system. used to install Windows Vista. get the message cannot open the file E:\Sources\Install.wim. Also the code error 0 x 80070002

  So all this started because I tried to clean my computer to give to a friend. I tried refomatting the hard drive, but something was wrong here. After that, when I turn on the computer I get a black screen with message Bootmgr missing. I read a little inside and saw that I could download a Windows Vista recovery disk because my computer did not come with one.
  After that I downloaded and burned the ISO image to a CD, things started looking better. I got to the screen when you select the language and keyboard. Then install windows screen. My options there were 'Install now' and 'repair your computer '. When I try to install, I put in my product key that seems fine. The next message I get is "Windows cannot open the required file E:\Sources\Install.wim. The file does not exist. Make sure all files required for installation are available, and restart the installation. "Error code: 0 x 80070002.
  When I try to repair, he said "select an operating system to repair, and then click Next."
  Operating System: Windows Vista (TM) Home Basic (recovered)
  Partition Size: 34318 MB
  Location: (D :) ACER
  If you do not see your operating system listed, click on load drivers to load the drivers for your hard drives. I try to select Windows Vista retrieved and clicked Next, but what is said "this version of system recovery options is not compatible with the version of windows that you want to repair" or get a recovery of tools such as repair system, System Restore, complete pc windows, tool windows and command promy memory diagnostic restoration. the only problem is he says operatins system: (unknown) unknown local disk...

  Any help would be appreciated. Really want to give my friend a laptop that wont even turn on. Laughing out loud

  Was it Neosmart?

  This isn't an installation disc. It's a record of startup repair!
  You use the repair disk option, not Install.

  How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.

  There is no Vista free download legal available.

  https://secure.TX.Acer.com/rcdb/main.aspx?brand=Acer

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11; Acer is in some models Alt + F10 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Ask them if you can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon. Mick Murphy - Microsoft partner

• Cannot open the raw files of Nikon d800 in PS CS5 and can not be updated Camera Raw plug-in

  Cannot open the raw files of Nikon d800 in PS CS5 (Win7 64 bit). It is said, the model not supported by Camera Raw. Tried to update Camera Raw plug-in for d800 but keep error message: failed to update, Adobe Application Manager may be damaged. Re-install the latest application manager, but still the same error message. How to fix?

  Thanks to them both.

  Nothing worked until I managed to speak directly to Adobe support. They recommended to install the latest version of Camera Raw Installer 8.6. It has not helped to open NEF files immediately but he fixed an error of 6.7 'update failed' updated Camera Raw! After updating to 6.7 all goes well, see my d800 naves. Cheers, Sergey