Cannot open the link to the forum which should fix the bug of replace text

Similar Questions

• Cannot open the Task Manager (replace Win 7 Task Manager) in Windows XP Professional SP3

  Hi guys, my computer is Windows XP Professional SP3, my problem is the Task Manager can't open because I change for the Windows 7 Task Manager to test open this software. I have FORGOTTEN to save the original Win XP Task Manager!

  HOW CAN I DO? I want TO RESTORE to Original Win XP Task Manager...!
  Can anyone please help me and wants to give me a link to download the original task manager Win XP...
  BillyRazOr

  Hello

  What do you mean exactly by changed the Windows 7 taskbar taskbar?

  You can restore the system and check if the problem occurs. Follow the steps in the link:

  http://support.Microsoft.com/kb/306084

• Cannot open the link to the external site pdf to Word 7

  I created a link to a pdf file in a Word 7 document.  The pdf is located on an external website. I get the following message appears when you try to follow this link - Ctrl + click.  I use Windows XP SP3.  The pdf file can be opened in IE and Ff.

  Error message: cannot open . Cannot open the specified file.

  Any ideas gratefully received.  trisht

  Trisht Hello,

  Thanks for visiting the site of the community of Microsoft Windows XP. The question you have posted is related to the word and would be better suited to the community of Office Discussion groups. Please visit the link below to find a community that will provide the support you want.
  Discussion Questions General Group

  Steven
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• I may have inadvertently downloaded Firefox 5 instead of 4 and cannot open the application because it is not supported. Can I still download Firefox 4, which I was planning to do?

  I tried to update to Firefox 3 Firefox 4. But, after completing the download and then tried to open the Firefox application, I got a message saying: "Cannot open the application"Firefox"because it is not supported on this architecture." Is it possible that I may have inadvertently downloaded Firefox 5? I do not think that my system support
  Firefox 5. I'm not a geek, so I really appreciated any help you can give me. Thank you.

  • Versions of Firefox 4 and later do not run a Mac PowerPC.
  • Firefox 4 and later requires at least OS X 10.5 and an Intel Mac.
  • http://www.Mozilla.com/Firefox/5.0/system-requirements/

  For a non-official Firefox 4 compatible version (TenFourFox) which works on Mac PowerPC with OS X 10.4.11 or OS X 10.5.8, you can consult:

  • http://www.floodgap.com/software/tenfourfox/

  Firefox 3.6.x (Mac OS X 10.4 and later versions) can be found here:

  • http://www.Mozilla.com/en-us/Firefox/all-older.html

• Cannot open the safari link after installing the iOS 9.3

  Cannot open the safari link after installing the iOS 9.3

  This is a common problem and there is currently no permanent solution yet.

  Try turning off JavaScript under settings - Safari - Advanced.

  I think that apple will figure things out soon.

• Cannot open the attachment in yahoo... says the file is used by another program... trying to open Microsoft Picture It!

  Cannot open the attachment in yahoo... says the file is used by another program... trying to open Microsoft Picture It!

  Minnie3,

  You may need to change the default program that opens the images.
  Take a look at the following link for more information: http://windows.microsoft.com/en-us/windows-vista/Change-which-programs-Windows-uses-by-default
  Hope that helps!

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• El Capitan is a problem? You cannot open the "Adobe after effects CC 'application because it is damaged or incomplete

  I downloaded After Effects for 30 days, and when I want to send this message appears "you cannot open the"Adobe After Effects CC 'application because' it is damaged or incomplete. (in fact, I speak Spanish, I just translated it...)
  I have OS X El Capitan, maybe that's the problem? How can I solve this problem? Help! Thank you

  First, see if the update to the fixed bug Mac 10.11.1 will help you

  -an exchange of views of 10.11.1 https://forums.adobe.com/thread/1986008

  He has problems with Mac 10.11 El Capitan... which is perhaps one of them

  See answer #5 in https://forums.adobe.com/thread/1965850 for several solution links

  -the first link that the answer is a possible solution to install problems

  -There is also a link on the video display problems in Premiere Pro

  - and many other programs... MORE Microsoft Office also has problems

• Cannot open the terminal failures of the file 'C\:HP\DATA\HP. DAT' to read.

  I've just updated my bios on my HP Pavilion g6-2102au Notebook PC.

  I had continuous multi color screens, thought it was overheating but not so much.

  I installed the latest version of the bios and it seems to have worked? having had a twinkle while writing

  This.

  My query is to start up when he started I get this message and I said OK

  Terminal Failute cannot open the file 'C\:HP\DATA\HPLB. DAT' to read.

  This is the message that someone help me get rid of it

  See you soon

  shiner2348

  Hi @shiner2348,

  Thank you for your inquiry.

  I understand that you receive the error message "Terminal failure cannot open the file"C\:HP\DATA\HPLB. " DAT' to read '.

  This is a reference to the launch of HP software box.    I suggest to uninstall and then restart your laptop.

  If you want to keep this app I suggest that you try to download it and install it using compatibility mode.

  Here are links to help you in this process:

  Compatibility mode

  HP launch box Windows 8

  Please let me know the results.

  
  

  Thank you for your participation in the Forums of HP! We want to help you as well as others who may encounter a similar problem as you. Please consider tagging the post in order to solve your problem as "accept as Solution" to help other members of the community!

  To show recognition for my efforts please click the Thumbs Up below.

• WINDOWS cannot OPEN THE FILE D:\Sources\Install.wim REQUIERED. Make sure that all required files for installation aare available and restart the installation. Error code: 0x8007000D,.

  IM TRYING to re - INSTALL WINDOWS VISTA ON MY T-6321 to the front door, BUT WHEN I INSERT THE DISC, AND INSTALL, a MESSAGE APPEARS SAYING: WINDOWS cannot OPEN THE FILE D:\Sources\Install.wim REQUIERED. Make sure that all required files for installation aare available and restart the installation. Error code: 0x8007000D, SHOULD ALL BE ON THE DISCALREADY?

  Hi JRCLNSIN100,

   

  Welcome to Microsoft Answers Forums.

  We would like to get some more information from you to help solve your problem. You better, please answer the following questions.

  ·         What is the disk you use to reinstall?

  ·         Is this a recovery or reinstalling the disc you are using?

  ·         When exactly do you get this error message?

  ·         What is the edition of Windows Vista, you try to install?

  ·         How old is the drive that you are using?

  ·         How are you starting the installation process?

  After researching the error 0x8007000D code is essentially due to file corruption and a problem with the drive itself.

  First check if you have scratches or dust on the disc and clean the surface and try again.

  To check if the disk is wrong, you will need to copy the contents of the DVD to the hard drive and try to install using that.

  To perform a flat installation of Windows Vista, follow these steps.

  Note The hard disk must have at least 3 GB of free space on the disk for the Windows Vista installation files. The hard disk must have at least 15 GB of additional disk space to install Windows Vista. For more information about system requirements for Windows Vista, see the Microsoft Web site at the following address:

  http://www.Microsoft.com/Windows/products/windowsvista/editions/SystemRequirements.mspx

  1. Insert the Windows Vista installation disc.
  2. Start Windows Explorer.
  3. In Windows Explorer, click to select the drive for the Windows Vista installation disc.
  4. On the Edit menu, click select all.
  5. On the Edit menu, click copy.
  6. Click to select the hard disk you want to contain the flat installation files.
  7. On the file menu, point to new, click the folder, type Windows Vista Setupand then press ENTER.
  8. Double-click the Windows Vista Setup program, and then click Paste on the Edit menu.
  9. Double-click Setup.exe, and then follow the instructions that appear.

  See the link below for more information on flat installation.

  How to perform a flat installation of Windows Vista

  http://support.Microsoft.com/kb/928902

  This problem can also occur if the firmware of the DVD drive is defective or obsolete.

  If the step above does not resolve the question suggests that you install the latest drivers for the DVD player on the computer.

  For more information please visit the link below.

  Error message when you try to install Windows Vista by using the DVD drive on the computer: "Windows cannot install required files".

  http://support.Microsoft.com/kb/930984

  Hope this information is useful.

  Let me know if it worked.

  All the best!

  Thanks and greetings

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• MMC cannot open the file C:\windows\system32\WF.msc

  When I try to open the Action Center, I receive this message. MMC cannot open the file C:\windows\system32\WF.msc

  Hello

  Thanks for posting the question in the Microsoft Community forums.

  According to the description, you get a message of error 'mmc cannot open the file C:\windows\system32\WF.msc' when you try to open the center of the Action.

  We will perform the steps and check.

  Method 1:

  
  Try to access the Windows Firewall configuration through the console Microsoft Management console.
  
  a. click on start
  b. type MMC (right-click and choose Run as administrator)
  c. click on file (in the upper right corner)
  d. click Add/Remove snap-in software component
  e. Select Windows Firewall with advanced settings, in Add Remove snap-ins windows
  f. click Add (clicking ok does not make any changes)
  d. click OK and you should be able to use the settings of the Console 1 window.
  
  Method 2:
  
  If you are able to use the settings of the firewall through MMC, then scan your computer for corrupt system files.

  Perform a SFC scan on your computer. Consult the following link:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Hope this information helps. Please reply with the status so that we can help you.

• Seagate installs but I can not find and cannot open the unit to see my files

  whenever I installed my seagate freeagent go drive.. initio default controller is the one that pops up saying ready for use, but I can not find and cannot open the unit to see my files, I can see it as (which I think it's maybe) in devices, printers as 'Initro Default Controller.

  The disc may need a drive letter must be attributed. Please try the following link to assign a drive letter to the drive.

  http://Windows.Microsoft.com/en-in/Windows7/change-add-or-remove-a-drive-letter

• Cannot open the document. Please check if you have read permissions for the file above.

  System:

  • Adobe Acrobat X Pro, 10.1.2
  • Windows 7 Enterprise, 32-bit
  • Badass de Core Quad CPU
  • 4 GB OF RAM
  • MS Word 2010 (Office 2010)

  I installed the latest version as an administrator and as an administrator. I have all the rights to all the files on the PC.

  When I try to create a PDF file from any Word document, if. DOC or. DOCX, I get an error window everytime:

  "Cannot open the document:

  "[document location]".

  'Please check if you have read permissions for the file above.'

  This occurs after the notice appears little "start of the application that created the document...". »

  If I open Word and create a PDF to the Ribbon, it works. It still only allows me to create from Acrobat.

  It creates a PDF file of Excel files, but not the DOC files. I looked for alternatives, but found nothing. I found that July 2011:

  "I have discovered Adobe support that it is a known problem with Office 2010 SP1 installed. It is news for someone of another encounter this problem, remove the SP1 and it will work ok. They said an update to fix this will be coming in the next quarter. »

  I have updated to the latest version 10.1.2 and I still have this problem.

  This is a major problem because it also fails on the batch conversions, which is what I really need for 100 or if the documents which must be PDFed. I'm not going to open each individual file and save each word.

  This is a KNOWN PROBLEM with Adobe, and if you look through the forums, you will find a lot of people having this problem, and so far, I have seen no solution.

  If anyone has found a solution, please report it here.

  Thank you!

  B

  Thus, the conversion does not work the first time if you remove the Normal.dotm? You have group policies that change your path models user (for Word) on a network drive?

• cannot start microsoft office outlook. Cannot open the outlook window.

  I have Windows 7 and keep getting this message when trying to open my emial. "" annot start Microsoft Office Outlook. Cannot open the Outlook window.

  Hi chatimcc,

  Welcome to the HP forum.

  Open a command window. Type outlook.exe /resetnavpane and press the Enter key. Now try to open Outlook.

• Windows 2k8R2 - receiving error when you connect (MMC cannot open the file: C:\Windows\system32\ServerManager.msc)

  Windows 2008 R2 - I just started getting this when I connect, and also when I try to manage the machine:

  MMC cannot open the file:

  C:\Windows\system32\ServerManager.msc

  It is perhaps because the file does not exist, is not an MMC console, or was created by a later version of MMC. This may also be because you don't have sufficient access to the file.

  It always worked before and work for other users simply not me on this particular area. It is a production company, and I need a quick resolution please. Thanks in advance.

  PM

  Hello

  Your Windows is better suited for the public of Windows Server on TechNet. Please post your question in the TechNet Windows server forum.

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer

• Cannot open the hard disk C: and D:, or no matter what follder on them by double-clicking

  After download cannot open the hard disk C: and D: Internet Explorer 9 windows updates or no matter what follder on them by clicking twice and I opened by right clicking and open.  So I have to use him created restore point Internet explorer 9 and return to internet explorer 8 and the previous record and the problem is solved. How I overcome this problem?

  Babis

  This can be a symptom of malware on your system. Take a look at the guides below for advice in conclusion/remove the malware from your system:
  http://www.Microsoft.com/security/PC-security/browser-hijacking.aspx

  Also: http://answers.microsoft.com/en-us/ie/forum/ie8-windows_other/my-internet-explorer-has-been-hijacked-by-a-virus/f26f7291-d646-4870-864e-a31976df0011